Just installed Microsoft multipoint and now I want to restore. I made a restore point before I installed multipoint so now I want to use it but when I go to start>accessories>system tools - Its not there. Even if I type in "System restore" in the start menu nothing comes up so did multipoint disable or remove it? (I am in maintenance mode).
View 9 Replies
Since yesterday I have been unable to make contact with my WiFi. Everything else seemed to be running fine. I decided to try a System Restore and go back two days. I started it two hours ago and it's still running. I have a feeling this System Restore will never end. I made almost no changes in the past few days. I can restore from my backup but I am beginning to think this may be a hardware problem. I am using a different computer to log this message. Windows 7 Home Premium SP1, 32 bit, 4gb
View 2 Replies View RelatedThis morning (Wednesday) my desktop computer brought in automaticly Tuesdays (26/04/11) set of patches, 6 in total for my machine. I turned the computer of for as I headed of to work and they installed on the shutdown. On returning from work the updates continued the install procedure on loading, but stuck at 0% for over 20mins. I decided to check the install time for this stage on my laptop 7pro x86 and it wizzed through in a few moments (laptop is a good 6yrs old). I figured the desktop was stuck and hit reset, every time it would get stuck at 0% on configuring the updates. Booted into safemode and ran system restore to the morning. Computer now loads up ok but will not connect to the internet. It would appear that its not getting an IP from the router.
What i've tried so far:After running system restore I've removed the Anti virus (Eset Smart Security). Tried setting manual ip address and ping router and laptop, also tried ping from laptop to desktop, both ways destination unreachable. reinstalled network drivers, same fault occurs. Reset winsock (netsh winsock reset catalog), rebooted after. reset TCP/IP (netsh int ip reset c:esetlog.txt), reported ok, rebooted same fault. ran sfc /scannow, reports system file integrity ok.Unchecked IPv6, same issue occurs. Checked network cables on laptop, ok.
I had a bootcd error that was fixed with system repair disk however all documents files cannot be found
View 1 Replies View RelatedI have an Acer Aspire timeline computer I bought 2 years ago. This computer advertised great battery life, internal cooling, and all sorts of other cool things....unfortunately, it was all a lie. But enough about that, As of like 3 days ago, I noticed my computer would respond slowly and take forever to complete a shutdown. I thought nothing of it until I decided to scan it usingSuperAntiSpyware. It came back with 40 tracking cookies, which I deleted. Upon rebooting my computer, I noticed it was still running slowly. So I decided a system restore would be niceI tried the first availible restore date. That apparently failed. Then I tried several others, with no success. I kept getting error codes telling me that the system restore failed to extract the file. It said the disk failiure might have been caused by bad sectors....I have no idea what that means. Ive tried multiple restore dates, they all come back with the same message.
I do not have Norton on my computer ( I read this was part of the problem in many other machines with the same restore error, but just to make it clear, that is not part of the problem with my computer). I can only use my computer in safe mode, because the regular boot mode is wayy too slow and laggy. Also I have plenty space on my computer so it couldnt possibly be slowing down because its getting full or something.
"Windows cannot find C:windpwssystem32 stui.exe"; also "wfn.exe". [code]
View 7 Replies View RelatedSystem Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies View RelatedDoes anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View RelatedJust got Microsoft Multipoint, I have internet but cannot access my home network drives and other computers. In Network and Sharing under the House icon it says that its a private network and when I click on "Private network" it opens a window that allows me to change between a home, work, or public network I click home and then a pop up comes up saying; "The network location is now Private" I dont get it one bit. Also theres a bench icon also but that says unidentified network and "public network" underneath.
View 2 Replies View RelatedSo I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 Replies View RelatedOK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies View RelatedI am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies View Relatednot A legel verison of window 7. wont to restore to factory setings.
View 1 Replies View RelatedI have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies View RelatedI have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies View RelatedMy Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies View RelatedSystem restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
View 9 Replies View Relatedmy Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
View 3 Replies View RelatedI lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
View 3 Replies View Relatedjust wondering if it is possible to find out if a certain program was running on my computer at a given time. I'm not talking about a scheduled task, but I had a program running at night, woke up and it wasn't running, so is there a way to tell what time it was last running or stopped?
View 1 Replies View RelatedI have tried to uninstall McAfee 5 times each time I have had to restore to get the computer back up and running.First I uninstalled with windows then I uninstalled with McAfee tool then I right clicked it to run as admin then I found a setting in McAfee that said do not delete McAfee system files changed that then I tried in safe mode still no luck called McAfee then did remote tech support they uninstalled it and it blues creened.Now they are saying it is not their fault since McAfee is uninstalled!!
View 8 Replies View RelatedI have been trying to install a weather programme. I have had a lot of problems so un-installed it. When I try to manually delete a few remaining files I get a message that "Errorther instance of the program's .exe file is running. Program will be terminated." How do I find this to get rid of it? Nothing shows up outside of the programme files (x86) when I search.
View 1 Replies View RelatedI cant shut down my computer, without forcing whatever programme is running in the background to close. And I know ive not got anything open.
View 8 Replies View RelatedI am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
So my system (updated specs in my profile) has been running perfectly since first built in January.Saturday, a Steam update came out. Ever since then, I have had major problems. It starts with the entire system totally freezing and occasionally BSOD.If I reset (hardware reset button), then bios can't find any of my hard drives (two different SATA channels), but it can usually find the DVD (also SATA). Sometimes it will hang on the drive part of boot up. (ACHI mode is enabled.)If I do a cold boot (hardware off, wait 15 seconds, then on), then it boots and runs fine. for about an hour, maybe two... then the above happens again. It doesn't matter what I'm doing, games, surfing, or not even at my computer. I did notice that the drives were running much slower than normal, so I updated the Intel Response Time thing (whatever you call it). That greatly improved drive response and boot time. But it did not cure the crashes.Other than verifying all the case wires were firmly connected, I haven't had time to do anything else.I can't imagine how a software update (Steam) could frack up my bios or my mb, but that is the only thing that has changed between running perfectly to totally unstable.
I'm planning to uninstall steam and reinstall.I'm not confident that will help if the update has caused another problem.I don't know if it's Windows 7, Steam, hardware, or a bios issue.
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedLiving is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View Relatedive got a sony vaio laptop that worked fine until i dl a pdf file and tried to view it, the machine froze and i had to reset it, since then it will not boot, booting from hd it gets to the windows logo then flashes up a blue screen with text on it that stays on for 1 sec then it resets and starts again.ive tried the sony recovery tools that shows no partitions on the hd, system restore says there are no restore points.
View 13 Replies View RelatedI am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points.
View 1 Replies View RelatedI recently did a system restore and when I started it up some of the documents are gone from the desktop. retrieve them they where word files .
View 1 Replies View RelatedI can create restore points. I just can't restore from them. I get this message:
System restore failed while restoring the registry from the restore point. The restore point was damaged or was deleted during the restore.
I have tried restoring in Safe Mode.I have deleted all restore points and turned off sys protection, rebooted and turned System protection back on.I have uninstalled Kaspersky (my system protection).I have made sure Volume Shadow Copy is started.
