I have a home network using the KEYSOFT workgroup. There are several XP computers on this network and everything has worked great. I just got a new Windows 7 laptop. I'm using a WiFi network to connect to the other computers. I set the Win 7 computer to use the KEYSOFT workgroup, and I can actually see the other computers on the network, but when I try to access them, Win 7 makes me log onto the other computer.
This has two problems:
1. I have never before needed to log onto other computers to access them.
2. The logon window says that I must log onto the other computer in the domain LAPTOP (which is the name of the new Win 7 computer). Since I'm using a workgroup and not a domain, I can't log on successfully. The logon dialog shows no way to change either the domain name or change it to a workgroup name.
How do I access the hard drive of one of the XP computer?
PARTIALLY SOLVED -- If I ignore the erroneous domain and just put in a logon name and password for the other computer, I can get in. But is there a way on this trusted network to access the other computers without logging in?
I have two computers - both in the same Homegroup. They both show up in my network map - but I don't know how to allow access to each from the other one. Also, I have a networked printer which does not show in the map.Shouldn't it? It works from both computers.
I have upgraded my vista home premium to Win 7. I now cannot access the Xp computers on my home network but I can access my other Vista computers ok. I can ping all by ip and name ok. But file access just comes up with error 0x80070035 'the network path was not found'. All the computers can access the Windows 7 computer and read files ok.
All the computers are on the same workgroup, Nothing been changed on any other computer as it all worked before this upgrade! Tried disabling the firewall, set to Home network, no homegroup set. The original vista drive which I 'ghosted' before I upgraded to 7 still works with full access to all networked computers.
I've added a new laptop to my home network (now 3 computers, all of them with win 7 ultimate 64) . I didn't use home group because i don't like it, so i configured everything manually and everything worked great, file sharing. printer sharing, everything. And then I added a password to my user on the new laptop to protect it and the sharing between the laptop and the two other computers stopped working. when i try to access the laptop from another computer it reports i have no access, and when i try to access one of the computers from the laptop it asks for a user name and password.i uninstalled firewall - didn't help. reinstalled. i removed the password - problem solved. added password again - problem returns.
I am trying to allow only certain computers on my HomeNetwork to access a network drive. My router is a BT HomeHub 3 and thecomputers are all connected by ethernet cables, the computer I don't want tohave access is wireless. The network drive is connected to the network using aUSB on the HomeHub. I can access the network drive OK on all the computers, butI don't want the wireless computer to have access. I have tried and tried towork it out, nut the more I look the more confused I get. I'm sure there mustbe an easy way to this problem. Any help will stop me having sleepless nightsthinking of how to do it.
I have a brand new desktop running Win 7 64 bit and a laptop running Win 7 Ultimate.
The laptop uses IPv4 to connect, verified via ipconfig. The desktop uses IPv6. Each can see one another on the network, but cannot access one another. If I uncheck IPv4 on the laptop, I can then access the desktop PC, but cannot surf the internet. Once I click it back on, I lose access to the desktop.
I have tried connecting to both with and without homegroups enabled, but I think it's the IPv4 on the laptop that's causing the issue.
How can I get these two to play nice? The laptop hooked up wirelessly with an Aetheros AR5007EG adapter via Realtek PCIe FE Ramily controller. Can I force the laptop to use IPv6 somehow?
I am running Windows 7 on six computers. I can see all of the six and they can see mine. I have finally figured out through some internet research, how to get their computers to access mine. However, when I go from my computer to theirs, I get asked to enter a network password. All of the password protection is off. It's saying something I'm not understanding underneath the user name and password request boxes. It says Domain: and has my PC name on it. How can I get the access to go on their PC's?
I use wireless network in school, and i want to access some files from other computers using the wireless connection.i use by toshiba c675 windows 7i have no clue on special tricks other than common knowledge of computer.
I have a sort of file/media server setup on one of my boxes as I need a few programs running on it that can't be run on anything else (Well XP, but I'd rather have 7 running on the system).Well the problem is that none of my other computers can access it other then my main rig and another laptop which are both running Windows 7.My Macbook and Android can't connect to the Server.When I restart the Server, the Macbook and Android can connect to it for 30 minutes or so. As long as it's always running, it'll stay connected such as when I'm streaming a movie, but if it's inactive it'll cut the connection and will be unable to reconnect.If my Macbook can't connect, my Android device can't and vice versa. I don't want to have to restart the Server every time I have to reconnect so any help? I've tried changing the Local Security Policies, changed the network settings to not use 128bit encryption, but nothing is working.On the Server it just has Windows Firewall and Microsoft Security Essentials.
I created a vpn 'server' on a XP pro machine...I am using a Win 7 Home machine as the Client...I vpn in...goes thru perfect...I cant actually see the computer or get to it by name, I only can if it input the ip \10.0.0.? when I do this i get a Enter Network Password...I have tried the user/pass I created for a shared folder on the target machine...i have tried the admin user/pass on the target machine...i made my user/pass on my Windows 7 machine the exact same as the taget machine and nothing works.
whats jacked up is....I have a laptop with Windows 7 on it and it works great...and another XP machine that goes thru perfect as well.. the Windows 7 machine in question I just did a complete factory restore on it and still same thing
Whenever I Click on the folder of next network computer on Network of my Computer then it says 'windows cannot access to saurav-pcphotoshop" both the computers are mine.. how can i share that file between these two computers?
I recently did a complete reinstall of Windows 7 64-bit on my desktop computer and now I can't access shared drives on my wife's Windows 7 computer (home ethernet network). I was able to install and use the shared printer attached to her computer. I am able to add her shared drives to my Windows Explorer as mapped network drives, but if I click on one an error box pops up: "J: is not accessible. Access is denied."
Her computer and all of her drives show up in the Network section of Windows Explorer, but if I click on one, I get a Network Error popup saying "Windows cannot access \Wife-pcc. You do not have permission to access \Wife-pcc. Contact your network administrator to request access." I am able to control her desktop and transfer files using UltraVNC...that's actually the only way I can transfer files at the moment.
If, from her computer, I right-click her C: drive, select Properties -> Sharing, it shows the drive is shared. If I click the Advanced Sharing button, and then click the Permissions button, under "Group or user names" it shows "Everyone", and shows the permissions as Full Control, Change, and Read. What else do I need to do so that I can access her drives as Mapped Network Drives? I was able to do so prior to reinstalling Windows 7 on my computer, and nothing has changed on her computer.
I am working on machines at a local car lot heres the system details.Verizon DSL wireless router, don't know the exact model but all 4 computers are hard wired to it with newer cat5e.4 newer desktop computers, within months. all 4 same specs. They are HP systems with 8gb of ram running Win 7 x64 They use a program called car lot manager, it basically is installed on 1 machine and creates an access database. Then that folder is shared. The other 3 computers install the software and access the database file through that share.The database file was about 100mb which I figured was probably the issue, so I cleaned it up and compressed it. Its now down to around 40mb and has the exact same issue.-- The issue is, if more than 2 computers have the car lot manager open (not even using, just open) it begins to move extremely slow to where windows take 2-3 minutes to open and the application hangs. And I'll add we have tried different combinations of which computers are running the software, trying to see if maybe 1 certain machine was the issue.I have been on the phone several times with the programmer of the software and he claims it is ran at several large car lots as well with 10 or much more computer systems and he verified everything is setup correct and looked through his software.The original setup was the Verizon modem into a netgear 8 port gig switch, then the 4 computers into it. I removed the switch just to see if anything changed, it didn't seem to make a difference.
I have two win 7 computers on a home network and I would like both machines to have full access to the hard drives on either machine, not just share folders. How is this done?
Both my laptop and desktop are running Windows 7 64 bit. They both have the same issue through wired ethernet, but not through wireless connections. The reason I do not use wireless is because I only have 2-zero bars in my room. I am at a college campus and they have said the problem is mine and not theirs. The problem is that whenever my computer turns on or awakens from sleep, the ethernet connection is gone and for about 15 minutes it says "Identifying... No Internet Access." The wired connection starts after about 15 minutes, but this is insanely difficult and frustrating to maneuver around since I often don't have 15 minutes to wait.
I have tried various things from forums to no avail. These things include disabling IP 6, updating my ethernet driver from the website, manually setting the IP, and disabing Avast. I do not have any firewall other than Windows Firewall and only have basic programs like Office, Itunes, Firefox.... I am convinced the issue is with the college network, but they have said their test computer was unable to duplicate my problem in my room.
Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:UsersMudkip>ipconfig /all Windows IP Configuration
I am running a modem and wireless router which is working fine. I have my home computer up and running (Windows 7)- no problems at all. However, my work laptop (windows 7 professional) will connect to my wireless network but will not 'access' the internet. I have set up a connection from scratch; changed the network settings; restarted (everything) plugged in wth Ethernet cord; run a router check... and honestly I am way out of my league in figuring this one out.I tried several of the solutions for forum threads around the problem of 'connected to internet but no internet access', but part of my confusion is that one computer works fine, but the other simply won't allow access. When I use a when I use an open network it won't allow me on at all. But when I set up my private network it will connect and show internet access for 10 SECONDS at a time and then No access... like a constant flicker...
Three Computers on a home network. Desktop in Office (Windows 7) . Wife's Laptop (Windows 7). My laptop ( Vista unfortunately). Norton Security Suite and all three. I have a network setup and a Homegroup established.
Everything was setup and working so that I could share files between all three. My wife was able to open a desktop file make changes and save it back to the desktop computer.
All of that changed. Now we get a message when trying to save the file. "You do not have permission to save in this location. Contact the administrator to obtain permission".
I have given the entire "MY Documents" sharing permission to everyone. I have checked everything. I have looked over all kinds of forums and nothing has worked.
I am to the point of doing a complete reinstall of Windows 7 on my Desktop.
I have a Dell Inspiron 545s Desktop - Intel Duo Core 2.93, 6gb RAM, 720gb HD, 64bit Windows 7
I get the message: (every time I try and open a folder on my c/drive - Can't access Windows Explorer folder on the taskbar and any other folder or file by double clicking it. I can open them by right clicking, then open) "this file does not have a program associated with it for performing this action. Please install a progra or, if one is already installed, create an assocation in the Default Programs control Panel".
I can open applications. But, I can not open the folder for them lets say in c:/program files -- the only way to open them is by rightclicking, then open. If I double click, I get the above error message. (same issue with "my documents", "My pictures", etc).
Included with the above problems: I now, can not access User Accounts. When I go into Control Panel, click User Accounts.. I can not manage existing ones, nor can I "Add or remove user accounts". I click the link and nothing happens.
I have someething built into the computer called "Dell DataSafe Backup". Its a recovery partition/part of the HDD that saves all my files for a recovery. However, I can NOT access it. I click the "Dell DataSafe" in my taskbar and nothing happens..
Last night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
Are there any Access database dudes that know if using taskkill.exe to close access (to close a database at night so it can compact) is a bad thing to do? I need to have my database closed at night and I always forget, taskkill.exe works, but my colleague, who designed the database, says that force quitting access breaks the database.
I have one PC running Vista (home basic), one running XP (professional) and one running Windows 7 (home basic). There is a printer connected to the Vista box, which is shared.
On the XP box I can both see and use the printer on the Vista box (i.e. a "net view \vistabox" shows the printer, and under "printers and faxes" I can install and use it).
On the Windows 7 box, however, I can see the Vista box (i.e. a "net view" shows it in the list of available PCs on the network) but a "net view \vistabox" gives me an "access denied" error.
The Windows 7 machine has a password on it, the Vista and XP machines don't. All machines are on the same workgroup name (which is "WORKGROUP"). On the XP box I don't need a password to access the shared printer on the Vista machine; it just works.
Extensive Googling has failed to render enlightenment, nor has browsing this forum. I'm sure it has something to do with security and passwords, somewhere, somehow, but I have no idea in which direction to look for it, let alone fix it. I have also read some things about workgroups and homegroups not being the same in Windows 7, but I'm not sure if this is correct (and if so, relevant).
This question may not be what you think it is. I am trying to fix an intermittent issue in my home environment. The issue is I am having to use wireless. Our Xfinity Cable/WAP modem sits on the top floor of our house. I am located in the basement. The wireless signal I get most of the time is very good, and by very good i mean at least 15+ mb/s on [URL]
I am taking the Cisco Network Academy classes and am familiar with network terminology and concepts. However, what I'm trying to do is take a router/WAP (using it downstairs where I'm located) and configure it to access our xfinity modem upstairs, so that I can plug in to it downstairs using a RJ-45.
Let me know what yall think. By the way the router/wap i would be using is a netgear model unknown at this moment but could easily find out.
i have my (main) desktop hooked up with mapped folders which my two other computers (laptop wireless and wired and desktop wired) can access and do what i intended them to with sharing restrictions, etc.However, my 2nd laptop that after a struggle connecting it to the homegroup will not allow access to any mapper folders keeps popping up with a login screen for THAT laptop, and my others will not connect to it properly.
Recently, a "Limited Access" signal has been coming up beside my internet access signal, even though it's got full access and the wireless connection is fine .
I am attempting to access an application.exe file on my desktop. Each time that I click on it the Windows message, "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." pops up. I am the system administrator so this should NOT be a problem but apparently many out there are dealing with this as well. I can delete, move and even copy the file but I cannot run it. There is no option for override with password or grant permission. It just says that I cannot run it. Also, the system I am running is Windows 7 Ultimate x64.
According to what I've read, Access 2010 uses the same database format as Access 2007. So this should mean I can open and run a 2007 database (with a lot of VBA code) in Access 2010 with no trouble, yes?So why do I have the feeling that something is not going to work? Is it because I have been through to many Access upgrades?
I haven't really had any issues since I first installed Windows 7 and now I'm trying to access a shared drive over a network and I'm getting this annoying error message that I cannot access a shared drive over the network.
I decided to reinstall Windows 7 and before that I never had this issue.
I have not installed any third party software, I've enabled network discovery and right now I cannot access any shared folders or drives, at all, though it can see it.
I'm getting that stupid error message: "<Network drive> is not accessible. You might not have permission to use this network resource. Contact the administrator of the server to find out if you have access permissions. Access is denied."
laptop so I reformatted his laptop and when I try to to connect to the internet via WiFi I could connect but I would have limited access. I can connect to the internet with my old laptop, iphone and xbox. But I cant connect to my newly reformatted laptop
