2 Computers Say "identifying...no Internet Access" On Ethernet For ~15 Minutes After Startup

Sep 11, 2011

Both my laptop and desktop are running Windows 7 64 bit. They both have the same issue through wired ethernet, but not through wireless connections. The reason I do not use wireless is because I only have 2-zero bars in my room. I am at a college campus and they have said the problem is mine and not theirs. The problem is that whenever my computer turns on or awakens from sleep, the ethernet connection is gone and for about 15 minutes it says "Identifying... No Internet Access." The wired connection starts after about 15 minutes, but this is insanely difficult and frustrating to maneuver around since I often don't have 15 minutes to wait.

I have tried various things from forums to no avail. These things include disabling IP 6, updating my ethernet driver from the website, manually setting the IP, and disabing Avast. I do not have any firewall other than Windows Firewall and only have basic programs like Office, Itunes, Firefox.... I am convinced the issue is with the college network, but they have said their test computer was unable to duplicate my problem in my room.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersMudkip>ipconfig /all
Windows IP Configuration

[code]....

View 3 Replies


ADVERTISEMENT

Home Wireless Connection, Continually Identifying Network, No Internet Access?

Feb 9, 2011

I have recently been having difficulties with connecting with my wireless connection. We have a in-home router that is connected to two computer's downstairs by cable. I however own a Acer, Windows 7 laptop that I mainly use upstairs and I get a Excellent signal strength.I have connected to my Home wireless connection before with no problem but recently the connection keeps coming up as ~Identifying... No Internet Access.Also when I have had connection to this network prior to this problem the connection is under Home. But when I try to connect to the same network it comes up as Public or just keeps Identifying. I have the connection set to Connect Automatically.Also the yellow triangle with the exclamation point almost always pops up immediately when I reboot my system or after I Disconnect and Connect the network again. I have tried Disabling and Enabling the network in the adapter settings and this does not work either. In the manage wireless networks tab, I have repeatedly deleted the connection and reentered the security password and again put it as automatically connect but it still comes up as Identifying. I have seen many people with this same problem and have tried many of the suggestions to no avail.It is rather bizarre because my connection will be in this Identifying state for a while and randomly connect properly and I have no idea what makes it go off and on so erratically. I just had it working again for a few days and it is again acting up.

View 4 Replies View Related

Can't Access Wireless Internet, Only Internet Available Is Via Ethernet Hard

Feb 1, 2013

I have a Dell Inspiron N5110, Intel core 3 processor, and Windows 7 ultimate 64 bit os. I have recently reinstalled windows 7 from the windows 8 os. I can't access my wireless internet, I can only get to the internet via hard wire. I have searched Dell and Intel for the network controller driver and the sm bus controller driver, but to no avail.

View 3 Replies View Related

How To Give Access To Internet On Connected Computers?

Dec 11, 2009

how to share internet between two pcs through wifi.

i connected both pcs through wifi adhoc connectivity.

all data has been shared but no internet access.

how can i give internet access on Windows 7 ?

View 1 Replies View Related

LAN No Internet Access When Connecting To PS3 With Ethernet Cable

Jul 19, 2012

I'm a 3g dongle to connect to the net, I previously set up the ps3 to connect through same via the wired connection. That work fine for a bit, until I updated the firmware, Since then the PS can't seem to obtain an IP address and after setting a static IP it gives me a DNS error. On the flip side, my LAN is giving me a no internet access problem(ipv4) and also an unidentified network

I've changed the cable, released and renewed and reset the ipconfig and also flush DNS. I'm having the same problem with my laptop. Both were able to share the connection with the PS3 before.

(Pc runs windows 7 32 bit and laptop win 7 64bit)

View 2 Replies View Related

No Internet Access After Unplugging Ethernet Into Laptop And Back In Pc?

Jul 15, 2011

So pc is working fine I unplug ethernet cable into laptop to access internet on it,works fine, put ethernet back into computer and now there is no access to the internet. The internet still works as I checked it by plugging it back into laptopThe pc is working all software etc. but there is no internet accesswhen internet works on laptop it says public network but on pc network is unidentified and i can't change it. I tried making a new connection but it asks for username and password and I've never done anything like that. Should i type one in and that creates the password etc. or would i need to have one to create it. I don't really know what the network thing is all about I'm a newb on that part.eI tried network trouble shooter and that didn't help either.

View 5 Replies View Related

Internet Connections: Connected To Two Computers, One "No Internet Access"

Jun 29, 2012

I am running a modem and wireless router which is working fine. I have my home computer up and running (Windows 7)- no problems at all. However, my work laptop (windows 7 professional) will connect to my wireless network but will not 'access' the internet. I have set up a connection from scratch; changed the network settings; restarted (everything) plugged in wth Ethernet cord; run a router check... and honestly I am way out of my league in figuring this one out.I tried several of the solutions for forum threads around the problem of 'connected to internet but no internet access', but part of my confusion is that one computer works fine, but the other simply won't allow access. When I use a when I use an open network it won't allow me on at all. But when I set up my private network it will connect and show internet access for 10 SECONDS at a time and then No access... like a constant flicker...

View 2 Replies View Related

Wireless Internet Stuck On Identifying?

Dec 18, 2011

I still couldn't get my wireless internet to begin working on my laptop. It goes between saying "Identifying... (NETGEAR) No internet access" and something like "Unidentified (something something) Limited Access." I've had this problem for about 2 weeks now and I just can't get it to work.I had the rundll32 virus and I believe something called "PING.exe" and I got rid of them with TDSSKiller, but after the reboot my internet wouldn't work and I got a prompt saying that PowerISO couldn't launch properly or something like that. I uninstalled PowerISO but the internet problem remains.

View 3 Replies View Related

Unable To Connect To Internet (Identifying Network)

Jan 19, 2012

I have a hp pavilion windows 7 home premium that will not connect to the internet. When i ping google.com i get "ping request could not find host google.com. please check name and try again.". however, when i ping 74.125.224.176 i get "PING: transmit failed. General failure. 100% loss". I have also tried to connect while in safe-mode but not luck and i also reset all setting in IE. I have two other computers connecting to my 2wire modem and they are both working fine. The last attempt was installing a new network pci card. I have also swapped out the cable but i still get "Identifying... No internet access."

View 7 Replies View Related

Unable To Connect To Internet (Identifying Network)

Jan 19, 2012

I have a hp pavilion windows 7 home premium that will not connect to the internet. When i ping google.com i get "ping request could not find host google.com. please check name and try again.". however, when i ping 74.125.224.176 i get "PING: transmit failed. General failure. 100% loss". I have also tried to connect while in safe-mode but not luck and i also reset all setting in IE. I have two other computers connecting to my 2wire modem and they are both working fine. The last attempt was installing a new network pci card. I have also swapped out the cable but i still get "Identifying... No internet access."

View 5 Replies View Related

Unable To Connect To Internet (Identifying Network)

Jan 20, 2012

I have a hp pavilion windows 7 home premium that will not connect to the internet. When i ping google.com i get "ping request could not find host google.com. please check name and try again.". however, when i ping 74.125.224.176 i get "PING: transmit failed. General failure. 100% loss". I have also tried to connect while in safe-mode but not luck and i also reset all setting in IE. I have two other computers connecting to my 2wire modem and they are both working fine. The last attempt was installing a new network pci card. I have also swapped out the cable but i still get "Identifying... No internet access."

View 1 Replies View Related

2 Computers Crossover Ethernet Connection Not Shown

Jun 29, 2011

Got Two Pc On one table and I always saw both PC's and I was able to transfer files and share a printer.Now I can only see my PC on the Network.

View 9 Replies View Related

Unable To Sync Computers Over Ethernet Cable

Dec 28, 2009

I have just installed Windows 7 Ultimate on my laptop and now find that I can no longer sync (I'm using Syncback SE) over a patch cable between ethernet ports. I had previously been doing this quite effectively on Windows XP and my procedure was.

1. Both computers were in the same workgroup and accessed the same wireless network (secure).

2. Ethernet patch cable - usually showed up in the lower right corner as having 'limited or no access'.

3. Shared my user folder on the laptop (after disabling wireless for security - but this worked whether wireless was disabled or not)

4. Ran Syncback SE ver 4.1.3.0. and synced my files between the laptop and desktop.

Then I bought Win7U for the desktop, and the same procedure as above worked fine between Win7U-desktop and WinXP-laptop.

Then I bought Win7U for the laptop, and what happened next was odd :

1. It worked like a dream - really fast transfers etc, scanning very fast. I think that at this time I had somehow managed to put both in the homegroup but they were communicating over the ethernet.

2. As the sync was taking place I launched ITunes and synced my iPhone. It may be coincidence, but the ethernet cable connection was lost at that point.

3. Now I cannot re-establish the ethernet connection.

What is the correct procedure for achieving what I'm trying to do above ? Why does HomeGroup insist on using my wireless connection instead of using the ethernet cable direct connection ?

<whine on> In my close to 20 years of using Microsoft Windows, why haven't they managed to make two Windows PCs recognise each other and share files quickly and simply, like you can with that other OS.....<whine off>

View 5 Replies View Related

Frequent Internet Access Dropping ''Limited Internet Access"

Oct 4, 2011

[code] I never had this issue on Windows Vista, occasionally my internet will randomly dropout. Limited Internet Access". When it does I can do a few things to get it working again:

- Disable, then enable my wireless card and reconnect.
- Uninstall the card, then re-install and reconnect.
- Disconnect from the internet myself and reconnect.

Either way it gets super frustrating. There is 1 other computer plugged directly into the router that does not experience any issues. In addition, I have 1 laptop (windows 7) that works great and 1 laptop (Windows XP) which works great.

View 1 Replies View Related

Slow Startup - Took About 15 To 20 Minutes

Sep 14, 2011

My laptop was working fine until about two days ago. I can't remember doing anything harmful to it specifically but suddenly significant loading issues have manifested. Today it took me about fifteen to twenty minutes simply to get to the stage where the computer was usable. Once it reached this stage, everything is fine and nice and speedy again. I have run virus checks using Malwarebytes and AVG (nothing detected), run CCleaner, defragged and removed all unnecessary start-up programs, resulting in no improvement whatsoever.

My specs are as follows:
OS Version: Microsoft Windows 7 Home Premium 32 bit
Processor: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz, x64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 2546 Mb
Graphics Card: NVIDIA GeForce GT 330M, 1024 Mb
Hard Drives: C: Total - 596211 MB, Free - 527235 MB;
Motherboard: TOSHIBA, NWQAA, 1.00, 123456789AB
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled

View 1 Replies View Related

BSOD Within 2 Minutes After First Startup

Mar 20, 2012

Getting this BSOD when starting it up in the morning. Afterwards the computer runs normally.I've tried to enable creating minidumps, but 3 days in (and 3 bsod's) it hasn't created one yet.I've copied info from the BSOD and Event Viewer below. Please let me know if any more info is needed.-Technical Information from the BSOD below: Code: *** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA00E399B30, 0xFFFFFA800E399E10, 0xFFFFF80002F935F0)

View 9 Replies View Related

Startup Takes More Than 3 Minutes Even With 6 Gb Ram

Aug 2, 2012

my Toshiba laptop takes more than 3 mins to start up even after i upgraded to 6 GB of DDR 3 RAM .. My processor is Core i3 330M 2.1 Ghz and OS win 7 64 bit.

View 8 Replies View Related

Desktop Is Stuck On "identifying" When Try To Get An Internet Connection

Jan 12, 2012

My desktop is stuck on "identifying" when I try to get an internet connection. My laptop wireless works fine. I have uninstalled all network drivers (including hidden), rebooted router, googloed for 8 hours now.

- Model of network card/chip? Realtek RTL8168B/8111b family pci - E gigabit ethernet NIC

- Is your Windows 7 32bit or 64bit? 7 64bit

- Are you talking about wired or/and wireless connections? wired (wireless is fine)

- Are you connected to a router or directly to the modem? router

- Is your network card/chip recognized under "Device Manager"? (its there and I removed all adapters (and hidden) and rebooted a few times

- Did you verify your ethernet cable to be sure there is no damage, or that it's not bent? yes

- Did you configure an Ip adress yourself or you left it do that automatically? tried both...I get a very wierd IP address 169.254.197.21 and when I try to get to router using 169.198.0.1 it gives me an error message.

- Did you installed the proper network drivers? yes

- Is there anything else that doesn't act normal? for desktop "identifying .. no internet access" on the wireless connection.. the desktop is showing error..BUT my laptop is working and at full strength...which is how I am commmunicating now. Have you used Spybot S&D to remove those pesky spywares that prevents the computer from connecting to the web?

View 27 Replies View Related

Startup Taking 7 Minutes After Update

Dec 6, 2012

I recently reinstalled my Windows 7 Home Premium 64-bit OS, and had about 120 updates installed when I shut down my computer. The next time I started up my computer, a notification popped up requesting that I install two system updates. I did find it odd that those updates weren't a part of the 120 or so updates. While updating, my power went out and caused my computer to shut down. That's when the problems started, it took forever to start up, and not just to the startup screen. Before that, the fans would be running. There was no display and my mouse and keyboard were off. It'd go on for about 4 minutes. When things started to show up, everything seemed to be in "slow motion", or in other words, all actions made by me were delayed or lagging by at least a minute. I found out during the boot screen when I had choices to start windows normally or not.
The computer also beeped once, which I understand is normal. From beep to the "Starting Windows" screen, it took 2 minutes and 20 seconds. And the "Starting Windows" screen plus the "Welcome" screen took 50 seconds to get to the Desktop screen.

View 1 Replies View Related

Windows 7 Crash About 4 Minutes After Startup?

Jun 11, 2012

This only started today when I arrived home. Windows would just stop, sounds continued but i couldnt click anything or ctr alt delete. The mouse can still move and after a few more minutes the computer would black screen and SEEM to reboot but be stuck at black screen with no post. I have another hard drive with the same windows installed (but its hd not ssd). and it ran normally without crash so this is not a hardware issue.

View 1 Replies View Related

Random BSOD On Startup And Almost Every 15 Minutes?

Sep 22, 2012

I have been getting random BSOD every day almost every 30 or 15 mins.I think it is hardware problem becouse even on fresh windows 7 install it still getting BSOD.

PC Specs:

OS NameMicrosoft Windows 7 Professional
Version6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS ManufacturerMicrosoft Corporation
System NameGOSHET0-PC
System ManufacturerBIOSTAR Group
System ModelP31-A7

[code]....

View 1 Replies View Related

Windows 7 Startup Stuck For 5 Minutes?

Dec 14, 2012

Ok, so last night, I was so tired, Instead of shutting down my PC thru Start -> Shutdown, I just used the power button from the Chassis, When i started my PC this morning, It was stuck at the windows logo for about 5minutes before actualy starting....I tried using the windows startup repair(Forgot the exact name) But its not repairing....Are there any software that check if theres something wrong with my windows 7 ,Because Im worried that if i restart my PC , It will get stuck in the Windows 7 logo permanently

View 1 Replies View Related

Windows 7 Freezes A Few Minutes After Startup?

Jan 14, 2013

I am new to the forum and seeking help.I recently experienced a bad boot sector on my HDD and had to reinstall Windows 7 (x64). I then also installed Ubuntu 12.04. Since then, when I load up Windows, it will start up, load icons, gadgets etc, but then within a few minutes it will freeze and I have to do a hard reboot. Ubuntu doesn't do this. If I don't hard reboot I get a BSOD.I am pretty sure Windows was not a bad install or anything. I assume it's probably because Windows uses more resources than Ubuntu.Could the damaged hard drive cause a problem like this or can I assume I also have problems with the graphics card or the RAM?Windows freezes in normal mode and normal mode with low resolution. As far as I can tell it does NOT freeze in safe mode, unless I've just not been using it long enough. Does this sound like the sort of problem a driver could cause instead of a hardware problem?

View 3 Replies View Related

Computer Uses 100% Of Hard Drive For A Few Minutes After Startup

Jul 9, 2011

I have a Windows 7 computer, and occasionally when I turn it on, it will use 100% of the hard drive for several minutes. (I have a Drives Meter sidebar gadget that shows drive activity). How can I troubleshoot this and find out its cause?

View 9 Replies View Related

BSOD 2 Minutes After Startup STOP: 0x0000001E

Jul 29, 2012

I've been getting the BSOD about 2 minutes after startup. During those 2 minutes, I won't be able to open anything and many of my background apps crash. I managed to reach Safe Mode

View 3 Replies View Related

Pc Freezes Every 2 Minutes And Takes Too Long To Startup

Jan 22, 2012

My computer was superfast until it started giving problems. It literally takes 30 minutes to start up and it freezes every 2 minutes. The Windows Experience Index showed a rating of 7.9 for the processor but now it only shows 4.9. The pc is quite new, I bought it 19 months ago.

Here are the specifications:
Motherboard - Intel Desktop Boards DH67BL Media Series
Processor - Intel CORE i5
Hard drive - Western Digital 500GB
RAM - 2 � Kingston DIMM 2GB DDR3 (4GB)
OS - Windows 7 Ultimate 32-bit

How can I fix my pc or at least stop it from freezing.

View 3 Replies View Related

ATI Overscan Settings Take 5 Minutes To Load At Startup?

Jul 29, 2012

When i start my computer up i have a big black border around the screen, which after 5 minutes goes away.I have set the scaling options from the default 5%, to 0% in the AMD Vision control center. but still there seems to be 5 minutes of delay everytime i start my pc up before these settings are automatically applied.

View 3 Replies View Related

After Around 5 Minutes Of Working After Startup, Windows 7 Completely Freezes

Nov 17, 2012

I've been using my Dell Inspiron 17R for around 2 months ago and it's a fantastic laptop, I mainly use it for videogames, music and movies/TV shows and it has ran flawlessly thus far.

Starting yesterday however, problems began to occur. I could boot the laptop up as per usual and access the Internet, play games, watch movies etc. but after around 5 minutes everything would suddenly become unresponsive. Both my mouse and trackpad wouldn't allow me to click at all, I could however move the mouse around the screen completely fine. The keyboard would also not work - I tried opening the task manager via Ctrl+Alt+Del as well as closing windows with Alt+F4 or trying to shutdown via the Windows key and nothing would work. Instead the cursor would change to the "loading" symbol and it would pretty much just do nothing.

The first time this happened I was browsing the Internet and it just got stuck on "Waiting for Cache" or something to that likeliness, I then noticed the rotating circle that shows a page loading had also halted and was then forced to reboot manually as I couldn't even click the Windows button. Another test I tried was watching a downloaded video - it literally just stopped playing around 4 minutes in. The screen just halted on a single frame even though the pause button hadn't been pressed - trying to click anything didn't work (as usual).

I tried rebooting it multiple times (I was sadly forced to use the power button) and it began to repeat every single time. It would work for a few minutes before completely freezing (minus the ability to pointlessly move the mouse around the screen). Occasionally a window would pop up above the task bar saying that the "Microsoft Windows application has become unresponsive". Sometimes the taskbar would then disappear and the laptop would shut itself down but the end result was always the same.

I found that the same problem did not occur when booting in Safe Mode with Networking, however there was some noticeable slowdown. I downloaded and used many anti-viruses/malware to scan my machine and I'm almost positive that there is nothing of the such on the computer (although in all fairness, the scans were running so slowly I could only make it to about 20% on each before giving up). Other solutions I've tried included:

1. Manually ending high memory usage tasks via the manager
2. Using CCleaner to fix my registry in Safe Mode
3. Left the laptop off overnight in a hope it would just fix itself
4. Unplugged everything from the ports of the laptop
5. Rebooted via the Restart, Shutdown and power buttons

View 1 Replies View Related

BSOD After 5 - 10 Minutes Of Torrent Client Startup (Netio.sys)

Dec 2, 2011

I am getting BSOD after 5 - 10 mins of torrent client startup (Netio.sys ). I face no issues when the torrent client is not running. I tried updating drivers and installing a different torrent client but the issue still persists...

I have uploaded the crash dumps and the snapshot of the BSOD.

Windows 7 Home Premium x64
hp dv6 laptop -product id:XR628AV
Using Wireless net connection
The computer is nearly 1 Year old
Mcafee internet security

View 1 Replies View Related

Windows 7 Startup Repair Freezes For 10 Minutes Then Doesn't Fix PC?

Sep 19, 2011

I have an Emachines E627 laptop. Last night I was doing some school work on my laptop, but then my laptop freezes, gets the blue screen of death and turns off. I then turned it back on, and the Window's screen pops up, quickly goes to startup repair and then it does the repair thing. After about 5 minutes into it, it freezes for about 10 min, then says: "Your computer will now turn off". So, it turns off, I turn in back on again, it goes to the windows start up screen, and does the same process over again

View 1 Replies View Related

Windows 7 Startup Slow (2 To 3 Minutes) Without Boot Manager

Dec 17, 2011

I have a 64G SSD drive and a 300G hard drive. I set c drive drive to be the whole SSD drive. Cd drive to d: and an e drive to be 100G. (out of the 300G). I am running an AMD phenom quad core with 12 G of memory. I have tried diabling all start programs. I downloaded all of the latest drivers from Gigabyte and also got the AMD series series 7 chip set drivers from AMD. When windows boots, it sits at starting windows for 2-3 minutes and then loads.

I have set custom events for ids 100-110 and it shows nothing or warnings on event 100 with no details. Once the balls become the windows icon, windows brings up my long on. Here is the vital clue, I installed Norton ghost 15. when I copy the drive to a third hard drive, the boot manager comes up. When I select boot windows 7, it load starting windows and then the balls with the windows icon almost instantly. It stays like this way even when I disconnect the 3rd drive. If I remove boot manager, I am back to 2-3 minutes to get past starting windows.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved