ive a large folder containing approx 2000 e-mails from approx 20 colleagues ... Id like to be able to count how many from each! And how many per day, etc. This would be possible by eg exporting to CSV file for analysis in eg Excel... But how to do? Or is there a better way? (PS I'm using WLM 2011. And I dont have Outlook.)
View 2 RepliesWorking on my Acer Aspire yesterday, I went to open a file in Photoshop and couldn't find the file in the folder where I knew it was located. Furthermore, none of the files previously located in that folder were there anymore either, though the folder itself was in its proper location in the file hierarchy. After searching desperately around, I finally found the missing files in an entirely different folder. That folder had always been there, but with nothing in it.
View 1 Replies View RelatedI'm having an issue with installing certain things, such as plugins for Firefox, but also other small software I have to download first.When I try to install, for example, the Flash plugin via the official website,I get this message in a popup."C:Users*name*AppDataLocalTemp could not be saved, because you cannot change the contents of that folder.Change the folder properties and try again, or try saving in a different location."I'm not sure how to set either of those things.But what should I do anyway?This is preventing me to do a whole bunch of things.For one, watching videos on the internet. Not so handy.
View 9 Replies View RelatedI just got a new PC with Windows 7 installed and have run into this issue twice, both times with a particular folder - let's call it "UsefulDocuments2" (the actual folder name DOES have a 2 at the end, but there is no folder called "UsefulDocuments").
Sometimes, when I try to view the folder contents using Explorer or through Windows Live Mail (in an attempt to include a file in the folder as an attachment), I can't view the contents of the folder. When I access the folder, it has the proper path listed in the address bar of the window and displays the number of items (171) in the lower left corner. However, the status bar just says "Searching for items..." except I can occasionally see it flicker to say "171 items."
While it is "Searching for items..." (which is 99.9% of the time), it doesn't display any of the contents of the folder. The scrollbar on the side of the window constantly flickers - it's recognizing that there are 171 items in the folder and that the scrollbar is necessary, but then keeps re-searching the folder contents, I guess.
Weirdly, if I change the folder name to, say, "UsefulDocuments" it works fine (at least right now). If I then change it back to "UsefulDocuments2" it reverts to its old behavior. Also, if I open a file in it in Word (2010), I can view and access the contents of the folder without any problem at all.
Obviously, I can just change the folder name, but don't really want to for organizational reasons, and also am just curious as to what's going on and how to fix it should it happen to other folders, etc.
I was using Chrome looking at some info on Cisco's website and my browser crashed, and all the contents of my Documents folder are missing as well as the desktop shortcuts associated with them.I've tried system restore but that didn't even complete, and EASEUS Data Recovery Wizard Professional and I have not been able to locate them.
View 2 Replies View RelatedI'm trying to take a screenshot of my music folder but it is too big to just alt+print screen. Is there a way to take a screenshot of the entire folders contents built into windows or a 3rd party program that can do it.
View 3 Replies View RelatedI have two computers connected to the same HomeGroup on the same network. Both are sharing their documents (Control Panel/HomeGroup). On both computers, Windows Explorer shows the user on the other computer under HomeGroup, and under each user is Documents. But when I click on Documents, nothing changes. It seems that it isn't reading the contents of the documents folder on the other computer.
View 9 Replies View RelatedIn win 7 is it possible to configure a folder to save it contents across different locations? I want to drop stuff I modify frequently into a folder that will save it on two drives so the files are backed up in case one drive breaks. If not possible please suggest a work around.
View 9 Replies View RelatedHope I can explain my difficulty. I have duplicated folders album name for all my music files, As there is quite a considerable number I wondered if it was possible to batch file (automate) the process. I can not delete "d" as this would delete all the tracks. What I need to do is move the tracks at "e" into folder "c" and delete the then empty folder "d" Folder structure.
View 3 Replies View RelatedI would like to be able to view the various temporary internet file folders like I used to with my previous version of Windows. Can anyone tell me how I can do this. I have tried using: C:> UsersMy DirectoryAppDatalocalMicrososft. According to my antivirus scan tool, the temporary internet files are located within the Microsoft directory but when I try to access that directory it's not there.
View 1 Replies View RelatedIn XP, I re-directed My Documents to a Data partition. In my old computer with Windows 7, I think I used TweakUI (which worked) and Junction for my iTunes folder.In my new Windows 7 laptop, I read about this mklink feature (which seemed to pass me by). Before I got a chance to use this, I selected all of the visible (non-system) folders in c:usersmyusername and cut 'n' pasted them to d:usersmyusername.To cut a long story short, this worked. Obviously i know it didn't move system related folders but it works.Basically it looks like Windows has automatically changed the target of the folders I moved . Is this right?
View 1 Replies View RelatedVista allowed the contents of a window to be sorted by name, date modified, etc in any view -- but it appears Windows 7 drops that menu bar for all views other than "details" view. I can right-click within the box to sort, but it's very inefficient. retain that detail bar in all views?
View 5 Replies View RelatedJust installed MS Office 2010 and set it up so I can use my Yahoo! email.The Drafts folder and the Sent Items folder aren't taking their contents over from Yahoo to Outlook.
View 3 Replies View RelatedIs it at all possible to hide the Downloads, Links, Favorites, Searches, Videos, Saved Games, and Contacts folders (just the folder, not contents)? I've tried just hiding it like any other folder but it won't work.AND if possible, have explorer open in my home folder instead of libraries.
PS: I tried disabling libraries entirely, but it opens to My Documents instead of my home folder.
I've successfully installed several instances of Windows 7 Beta 1 on several virtual machines. However, I am being stymied when attempting to perfrom a "native" install into one of my hard disk partitions in a multiboot configuration. I keep getting the following error message during setup:
"Setup was unable to create a new system partition or locate an existing system partition".
I have 2 internal hard disks. The first is a SCSI drive housing an instance of XP. It is the "system disk". The second is an IDE drive housing 4 primary partitions. The first holds NTFS data, the second an instance of XP MCE, the third contains VISTA SP1, the forth is the desired destination partition for Windows 7.
When I boot the Windows 7 setup DVD and get to the point of selecting the target partition I get the above error message.
Things I've tried:
1. Formatted the target partition as a Primary (via XP) - fails with above error msg
2. Formatted the target partition as Logical (via Vista) -- fails with above error msg
3. Left the area unformatted and let setup do the formatting - fails with above error msg
4. Installed a test version of Vista in the target partition first and
then tried to run a Windows 7 "Upgrade" from within that copy
of Vista - fails due to a weird bug requesting install of a disk driver
that device manager shows is already happily working.
I've been all over the web trying to find a solution. Many people have experienced this error message when installing Windows 7 in a multiboot situation with multiple drives but I have not found any viable circumventions. One person claimed that pulling the power cord on all hard disks other than the one containing the destination partition worked but I cannot do that since my SCSI is the "system disk" and houses the BCD and Bootmgr required by the VISTA (and Windows 7) partitions on my IDE drive.
This is probably a bug since Vista installs very nicely into the same partition with no problems. Hopefully it will be fixed by the RTM release. However, I would really like to circumvent the bug so I can use Windows 7 natively in the interim.
I have a problem getting Media Center to display my Photos showing the individual photos contents of each folder.I am running Windows 7 HP 64 bit with all updates. My MEDIA (movies, music & photos) are on a separate hdd (M). Each of the media formats has it's own folder on the M drive, Movies, Music & Photos. I have no problem with the movies or the music. However, when I choose "pictures" in Windows Media Center only the individual photos folders are shown....no photos are shown in these folders. I see the individual folders but no contents. I have set up "Libraries" on the C: drive; Music, Video & Photos. When I click on photos in the "Libraries" all the photos folders are show each with it's own photos. I have "Shared" these libraries as well as each folder on the Media drive M. The format of the individual photos is jpg. I have run SFC/Scannow.
View 5 Replies View Relatedi've been doing some movie making for Internet lately, the raw avi files for which are rather large, the latest being 7.5gb for not even an hour's recording. are these files weaving around the smaller ones the reason for my hard drive getting fragmented so much lately? i just ran an auslogics disk defrag analysis and it found my hard drive was 11% fragged, and windows defragmentation found 14% the other day.
View 1 Replies View Relatedearlier turned on my pc, and it blue screened with the error Bad_Pool_Header. It had been on 4 hours before hand and during the session before it Blue screened I installed no new hardware or software. I ran though the .dmp with OSR online and this is what it said:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17017.amd64fre.win7_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03459000 PsLoadedModuleList = 0xfffff800`03695e70
Debug session time: Fri Sep 14 12:36:07.614 2012 (UTC - 4:00)
System Uptime: 0 days 0:02:29.753
[code]....
I face the old fashioned problem (now) in Windows 7 Explorer that, after a data backup (imgBurn) to DVD, the new DVD contents is not displayed until I cycle the tray!?
Is there something I can do about it?
I had it plugged into my laptop when I was blowing it off and putting a copy of XP Pro on it. When it said to delete the partition, I clicked on the USB drive on accident. Now plugging it into Win 7 computer, it wants to format it. Is there any way to get my files? I have one word document in particular that has been my life's work. I had not backed it up in over 2 months.
View 7 Replies View RelatedI want to stream content over a LAN. One computer will act as the "content host" and one or more computers will act as "content clients". Is there any software that can stream content from one computer to several computers. My network contains DHCP addresses, and it is comprised of Windows 7 x64 Professional Computers. Ideally the "content streaming" solution will be compatible with Multiple Operating Systems.
View 3 Replies View RelatedI wonder if I can remove the application "DAE9.exe (application for Windows Internet Explorer)" located at: C: Users Christian Cdiz AppData Roaming Microsoft 64FD..This application will be a window on the desktop with the message:"Are you sure you want to exit this application" with a message attached:"Message from website: click below to continue browsing cancel on localpages" options: "Out of this page" "Stay on this page".
View 2 Replies View RelatedI am having a problem with memory cards (SD) contents being recognized on a Windows 7 Pro machine. I am using an internal card reader, and have virtually eliminated it being a hardware problem because a new replacement unit gives the same results.The first time a card is placed in the reader after the computer is booted, the card is recognized but not the contents. In Windows Explorer, the card is designated "Removable Disk (H)". When I attempt to navigate to the contents, a window opens titled "Insert Disk", prompting that a disk be inserted into the drive.I can correct this on subsequent card insertions by clicking on the "Safely Remove Hardware and Eject Media" icon in the system tray. When clicking on the specified card/device (only item showing) I am prompted that "Removable Dish (H)" is currently in use". There are no applications open including Windows Explorer. Of the choices given, (Cancel, Try Again and Continue) selecting Continue results in an indication that it is safe to remove the hardware.When I remove the card and replace it, I don't get the expected Autoplay prompt, but when I open Windows Explorer the disk shows with the same drive designation, but this time with the volume showing instead of "Removable Disk". I can then navigate and find files and folders on the card.Removing the card again and reinserting it using the same procedure the second time results in the Autoplay window opening and the contents of the card being recognized in explorer. At this point everything works as expected and will continue to until the computer is rebooted.I would like to find a way to have the volume and contents of the card recognized and the auto play window open the first attempt after the computer is booted.
View 2 Replies View RelatedI tried using 7-zip, but I don't have it in the menu when I right click which it's supposed to be. So I went to the series of iso files and extracted them to a new folder but 4 minutes later all the files were in just one big iso and when I tried to extract that, it said the archive couldn't be accessed. I'm not trying to make a bootable disk; I need the files within the iso and I would rather not waste DVDs unnecessarily.
View 6 Replies View RelatedI bought a sony vaio, with Windows 7 home premium 64 bit, but the manufacturer had installed 32 bit OS instead of 64. The service center guys re installed the 64bit OS for me using recovery media(DVD-Rs) , but what i'm confused is, whether the recovery partition has the same old 32bit OS which came with the laptop?
View 2 Replies View RelatedI want to do a system restore on a HP pavilion DV7 through the recovery image found in the recovery partition. However i want to be sure if a certain file(software) is included in the recovery image.How can i reveal all the contents?
I've tried my computer tools>view>folder options and changing a couple of setting. Didn't reveal much. I've also tried checking the list of recoverable softwares in the HP recovery manager but its(microsoft office starter 2010) is not listed.
My computer does not show contents of windows, diaglog boxes when I drag them. Look like this figure: Then I verify the visual effects settings in Performance Options box (System Properties > Advanced system settings > tab Advanced > click Settings under Performance > tab Visual Effects):Note that I have the option "Show window contents while dragging" checked all the time by selecting "Adjust for best appearance" To let it show the contents, I have to do these:
1. Uncheck "Show window contents while dragging". Click Apply.
2. Select "Adjust for best appearance" again (or check "Show window contents while dragging" again) then click Apply.
when I restart my computer, or shutdown and then start it again, the problem is still: it does not show the contents of dialog boxes or windows when I drag them although the option "Show window contents while dragging" is checked.
transffering contents of rar file to desktop.. if i have a rar file which holds file content if i transfer contents of rar file to desktop the files will unpack but i can not operate the desktop while this is happening while rar file is unpacking i cannot even send at the same time anything to the bin.
cpu.quadcore intel q600
2gig of ram
windows 7 ulimate
hard drive...hitachi HDT725040VLA360 ATA DEVICE
cheers
is it possible to extract a .exe file or a installer instead of installing it on the HDD ???
View 3 Replies View RelatedI'm using 7057. Not sure when this problem started as I don't use CDs or DVDs that much. The drive works fine, ImgBurn works fine, all other programs seem to see the files on a disk fine, they just don't show up in Windows Explorer. I click on the drive in the "Navigation Pane" and nothing happens. I've tried two good DVD drives, uninstalled ImgBurn and PowerISO, still nothing.
View 3 Replies View RelatedI love to keep track of directory contents by printing them out. Various reasons.
By going to a command prompt, then to the directory of choice, I can send the results of the "dir" command to "prn" with the ">" (greater than) sign.
There are all sorts of switches to affect the way the printout looks. The ones I like are /b followed by /o:gn which gives you names only, directories first.
I run into a problem when there are hidden and system files in a folder. The switch for them is /a:hs.
No matter how I present the switches, all of the above, I cannot get the dir command to print everything. I get either all of the non-h&s, or I get just the h&s.