All Usb's Not Working After A System Update?
Dec 28, 2011
the other night i left my computer on and it said it was going to auto update at 3am, i came back downstairs to see it had updated and tried to use my mouse/keyboard (wireless Microsoft ones) and nothing was happening.. it said the windows update had installed correctly in the bottom right hand side, i guess the only thing it can be is a driver issue as it works on my windows XP partition i am using now and also works on a recovery disk/startup to get into bios.. the problem i have is i have tried a USB to Ps/2 connection with no luck (with my wireless mouse/keyboard and a wired one of both), ive gone into system recovery and apparently i don't have any system restore points (im 99% sure i did/do) ive booted into safe mode the story is the same there.
View 7 Replies
ADVERTISEMENT
Aug 12, 2011
Left my computer running Win 7 home premium on overnight, had just installed a fresh copy of windows. I saw a message saying the system was restarted because of windows updates. Now, none of my USB 2.0 ports work, neither the rear ports nor usb mobo headers work. The two usb 3.0 ports do work however. Those 2.0 ports were working fine previously. Never seen update do this before.
View 2 Replies
View Related
Feb 9, 2012
I've discovered three problems with this laptop and think they all might be related? Windows Update not working with error 0x80070057 - I have searched the internet for help on this and tried suggestions like; starting/stopping wuauserv service, deleting WinUpd cache. System Restore not working; unable to create restore points or restore (the last point is from November), this gives error 0x81000101 Shadow Copy Timeout. Again searched and tried fixing all suggestions like making sure the SysRestore services are running. Device Manager is completely blank; also tried suggested repairs like setting correct permissions on Enum folder in registry. On top of the problem specific fix attempts I've also done the following general fixes: sfc /scannow - found problems but unable to fix repaired registry from RegBack reset all Services to default ran combofix and malwarebytes chkdsk /r removed McAfee have checked Windows & Sytem32 folder for correct user permissions I'm sure I've done a few other things but can't recall everything I've tried.Have also tried Windows Repair but stays at "Checking Compatibilty" for hours.Generally Windows seems to be fine except for these three issues; system is quick and general useage is without issues.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU T6600 @ 2.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3932 Mb
Graphics Card:
Hard Drives: C: Total - 152621 MB, Free - 47735 MB; D: Total - 152221 MB, Free - 13148 MB;
Motherboard: TOSHIBA, KSWAA
Antivirus: None
View 2 Replies
View Related
Apr 26, 2012
I am running windows 7 Home premium on a Samsung laptop 64bit , 3.00 GB ram dual core CPU T4500. I had to send computer to be repaired under warranty and the hard disk was replaced. after this repair, I was trying start a game software and this would not run because it said that D3DX9_45.dll was mising in my computer. I have tried the DirectX upgrade and it starts loading ok, but at the end of the installation an error comes up saying that Direct could not be installed. I have also found that the windows update is not working because the service is not running. I have looked in the service data and the Windows update is running.
View 2 Replies
View Related
Apr 13, 2011
After the latest update my dvd drive, which is an hl-dt-st-dvdram gt32n is not showing in windows explorer. I cannot burn anything. Windows explorer hangs repeatedly and I can't do a clean shutdown at all. I went to device manager and it told me that Windows did not start a related device driver. I tried to update the driver but the scan is still running after 2 hours. I'm running window 7 x64 home premium with 4GB of memory. The computer is an asus k52f core i3.
View 5 Replies
View Related
May 20, 2012
i've been unable to do a windows update, it simply doesn't start and gives me an error message. When I tried SFC/SCANNOW in the command prompt, the scan completed and I got:Windows Resource Protection found corrupt files, but was unable to fix some of them. So that's about where I got to.
View 1 Replies
View Related
May 8, 2011
The other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
View 3 Replies
View Related
Nov 5, 2011
I have a problem with my windows updates. For some reason the windows update center is not working and my last update was on 16/9. I get a message to restart but nothing happens.I've already tried sfc/scannow, fix it, windows troubleshooting, fixit50123 and Fixit 50202 but the problem still remains. Somebody told me that cleanup registry that tune up maintenance is using propably causes the problem but don't know how to reverse the clean up
View 1 Replies
View Related
Feb 18, 2012
I recently did the update they windows 7 prompted me to do and now nothing seems to be working properly.- gadgets not loading ( blue square with !)- Skype not working, tried uninstalling, reinstalling,etc-Internet explorer problems- can not get to my email through my desktop and when I use Mozilla it won't let me update to the newest version.-computer running slow- cannot open some programs
View 2 Replies
View Related
Oct 13, 2011
i wasn't doing anything but watching a video on Internet and i got this pop up
looks like something here: [url]
View 5 Replies
View Related
Mar 1, 2012
Well as I said in the title after a windows 7 update my logitec headset stopped working and not just on win 7 it isnt working at all I tried it on my old pc (windows xp) and no sound. Could it realy be that some windows 7 update did something to my headset?
View 2 Replies
View Related
Nov 1, 2012
I recently changed my settings for Windows Update, to let it check for updates, but now it always asks for a restart. I tried almost every solution, i don't know what to do, i need SP1 for SQL Server 2012 to work, but it's not installing. I even downloaded the update from microsoft's website, but the installer fails. I tried almost every method i found :
- setting it to never update, then setting it back to automatic
- deleting the registry keys from the Update-er
- deleting the files in SoftwareDistribution
- trying FixIt (normal and aggressive mode)
- trying the FixIt method manually
- renaming the edb.log file in the SoftwareDistribution folder via safe-mode.
I can't give you an error number, since it doesn't show one.
View 9 Replies
View Related
Jul 23, 2012
I had the same 3 updates continually installing everytime I logged on. They were sucessful in update history but kept comming back. I ran the system rediness tool, but it didn't help. I ran the microsoft fix it soultions for windows update normal then aggressive. Now I get this error while checking for updates. I tried to run sfc /scannow and then sfc /verifyonly but get the following error: windows resource protection could not perform the required operation. I also tried to install the latest service pack got the following error: error_sxs_componet_store_corrupt(0x80073712). When I look at programs->installed updates nothing listed, also when I look at programs->turn on/off windows features nothing listed.
View 6 Replies
View Related
Aug 5, 2010
I have problem with my panel. After microsoft windows update panel just dont work, I can't even turn off lights at my lycosa, everything else is working right. This just happened after update and I dont know how to turn it on again. I think there where some settings which allow using such a panel. All drivers are ok, even razer macros works. Is there, in windows any option to turn on/off multimedia panel?
View 1 Replies
View Related
May 28, 2012
I've been having problems with my computer's sleep and hibernation. Whenever I use them, my computer shuts down instead, and when i go to wake it up I get a screen saying Windows shut down improperly. I did a little searching around and found out it seemed to be a common problem after installing SP1 for Windows 7, and that there was a fix. But when i went to download the fix, it told me I already had it downloaded. Yet I still have this problem. Other places said to try turning off the hybrid sleep option - except mine was already off.
View 1 Replies
View Related
Jun 18, 2011
Before the windows update, I could run vegas pro 10 fine, but for some reason the new update won't let me open it. What happens is I would click on the vegas pro icon on the desktop and it would show the circle loading icon for like a second and then nothing happens.
I tried reinstalling the software, but that doesn't work either.
View 5 Replies
View Related
Jun 29, 2011
He has an Dell laptop computer that runs on Windows 7.He has a basic, Microsoft brand, three button wireless USB mouse.Earlier this morning Windows Update manager gave him a pop-up that said he had updates to install.He installed the updates and restarted the computer. When he restarted, his mouse wouldn't work the keyboard works fine. He tried unplugging and reconnecting the mouse and to resynching the mouse, restarting his computer with the mouse unplugged as well as plugged in, and switching the USB port of the connector, but was unsuccessful in getting it to work and asked for my help.Seeing that the mouse appeared to be working (and it's worked flawlessly until this morning), I repeated the steps he had taken and then removed and reinstalled the drivers in the case a driver had become corrupted when updating Windows 7. Upon reinstalling the drivers and restarting the mouse worked again for about five minutes. Five minutes later, it stopped working.
View 2 Replies
View Related
Oct 23, 2012
i can not shut down it is updating the window
View 3 Replies
View Related
Aug 25, 2012
I purchased motherboard with the manufacturer number of MB.G0409.005 (MB.G0409.005 GATEWAY MOTHERBOARD DESKTOP BOARD SOCKET AM2) on 2/3/12. I had put it into my system and then proceeded to install upgrades from the Gateway website. I saw there was a BIOS update (file: 924G1P11.ROM) available so I tried to update my BIOS. Well, after updating my BIOS with the .ROM file that I had gotten from their website [URL], but after that, the on board ATI graphics adapter is no longer working. I tried to contact Gateway with no luck and them telling me that they don't recommend updating the BIOS. I also tried to contact the place where I purchased the motherboard from and they said that they didn't have the original .ROM. The motherboard is also not listed on the Foxconn website either. I am running Windows 7 x64 Build 7601 and I have also tried using a Ubuntu 12.04 LTS live USB and that did not work as well. As far as I can tell, the BIOS will not even recognize it. I am now currently using a NVIDIA GeForce GT 220 graphics card that is plugged into the 16x PCI-E slot. I have found modified .ROM files that someone had done for this motherboard, but I don't want to risk it. And every forum and post I've come across has dead links to ones that someone has made a copy of the .ROM file and uploaded from their motherboard.
My system is a Gateway DX4300-15e with 6 gb's of DDR2 RAM (originally 8 gb's of RAM, but a 2 gb stick blew out from a power surge, hence why I had to get a new motherboard) with a AMD Phenom II x4 970 Black Edition Deneb 3.5GHz Socket AM3 processor.
View 9 Replies
View Related
Jul 11, 2012
i only ever use firefox, and would always keep it and other programs such as flash and java up to date. one day, some websites just quit working, like facebook, Internet, netflix, and various game sites. this problem continued for a few weeks, and i didn't do anything to try and problem solve it. then everything seemed to magically fix itself, so i figured that an automatic update had done the trick. however, a few months ago those problems started again and since then i have read many threads on how to fix them, uninstalled and reinstalled ff, java and flash countless times, including past versions of all of them. i even tried using ie and chrome, but i had the same problems with those browsers. as of right now, i cannot view flash based game sites (such as omgpop).i used to not be able to play games on facebook, but as of yesterday those suddenly work again. i cannot watch streaming videos on netflix, but Internet works fine.i cannot view content on many web pages (for example google images does not work at all, nor does googlemaps or mapquest). some pages only load partially even though it says they are 'done'. i often see 'javascript:void(0)' on websites.currently i am running the current versions of java and flash and ff 3.6. i have checked pop up blockers and script enabling and just about everything else.i am at a total loss of what to do. (even as i am typing this, i cannot click on any of the text editing tools or smilies and this is showing up as one big paragraph) i've tried pretty much everything i can think of, as to manual installation and so forth.nothing works, nor changes anything.
so far it's only facebook (of websites) not working, and then of course flash and java.i would like to avoid comments such as: "just don't use facebook then *hurhhurh*" as the problem runs somewhat deeper than just not being able to use facebook. this computer is just about 4 months old as well, and i'm breaking my skull trying to figure out what the heck is causing this. on a side note i am up to date on both anti-spyware and anti-virus, and i've run several scans in both secure and normal mode.all comes up empty.
View 3 Replies
View Related
Jun 13, 2011
last night after applying a windows update none of my usb ports work. I have four onboard total. After installing the hotfix last night, two of them worked. After a reboot this morning im back to square one. Now last night before i got it briefly working, whatever i plugged in would charge but not be recognized by windows. Now i get nothing. no charge, no recognition.
View 3 Replies
View Related
Jul 24, 2011
system pack has shut down my computer, I have a blank screen, I did a system restore, that didnt work, then used command prompt to rename start up files this actually worked for a while. allowed me to run a scan disk etc. like online forum had told me, but then i couldnt access control panel, tried to do a system restore before the system pack update but no date available.
View 4 Replies
View Related
Aug 7, 2012
I have downloaded and installed the "System Update Readiness Tool".
Now how do I run it. I CANNOT find it in "All Program". How the heck do I run it?
View 6 Replies
View Related
Jun 25, 2012
my computer turned off while doing a system update when I turned it back on there was an error with a hibernation file now it wont load past the starting windows screen I've tried a system restore and system repair.
View 1 Replies
View Related
May 13, 2012
After an automatic update to my HP pavilion laptop computer, all of my word files are now saved in Word 2007 instead of Word 2010. I used the restore point and the problem disappeared. As soon as the update (identified as a critical update) occurred, the problem resumed.
View 6 Replies
View Related
Apr 26, 2011
I did the Asus live update, soon as i hit ok, one of my usb slots stopped working but the other is working just fine. It makes the noise when you plug in something, but wont work.
View 2 Replies
View Related
Nov 26, 2011
No drivers listed by dell for 7 Vista drivers
View 3 Replies
View Related
May 24, 2012
My Information Bar is not showing, so I can't activate the ActiveX Control (I tried to do a Windows Update today and the computer will not do same without the ActiveX Control, which I can't get because there is no Information Bar to make that possible). How do I get the Information Bar to show up on my IE 8 screen (I understand that it should be right under the Address Window)? I think that, when Microsoft installed IE 8 for me a short time ago during an automatic update procedure, even though I had not asked for that to be done, that is when the Information Bar disappeared. I'm just guessing at that, but I think that is when that happened
View 1 Replies
View Related
Aug 9, 2012
I had Windows 7 automatically downloading and installing critical updates. NO MORE!!! On 8/7/2012 a critical update was automatically downloaded and installed, unnoticed by me. When my computer would not turn on yesterday, 8/8/12 I tried many things, eventually restarting in Safe Mode - which did at least get me out of the black error screen and into windows. After poking around and testing things, I finally decided the only way to go was System Restore. There, I found there'd been an automatic critical update on 8/7/12. After restoring to before that point and turning off all automatic windows updates, my computer is now running fine.
View 11 Replies
View Related
Mar 31, 2011
I tried to update my leveno thinkpad 14edge and a sign said that the system administrators polices won't allow it to be updated. My question is Why? and who is system administrator or where do I change the setting so I can update.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , 32 bit
Processor: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, x64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 2996 Mb
Graphics Card: Intel(R) HD Graphics, 1274 Mb
Hard Drives: C: Total - 475738 MB, Free - 407021 MB;
Motherboard: LENOVO, 057826U, Not Available, 1ZH3903R2PP
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 1 Replies
View Related
Aug 26, 2012
The problem started when I had three updates that would not install at shutdown. I tried to run check disk and system file checker which neither would run initiallyCheck disk runs now and says there are no problems. SFC says "Window Resource Protection could not perform the requested operation." As for Windows update, I have tried deleting the temp update files located atC:\Windows\SoftwareDistribution\DataStore and \Windows\SoftwareDistribution\Download. I have also tried to Resource readiness tool as well as Microsoft Fix It for windows update. The fix it tool says it finds errors and fixes them but the problem is not fixed. It shows up every time I run the tool. Since deleting the temp files, windows update just says "Windows could not search for new updates" with and error code of 80070002.I suspected a virus at first but was unable to find anything with a full scan of AVG and Malware Bytes. Guess that doesn't mean there is not one.
View 14 Replies
View Related
