Accessing Work-group Computer Shared Files?
Dec 10, 2012
I currently have a workgroup set up with a server (running Server 2008) and 4 identical (literally) computers. Each computer has certain shared files. There is no problem seeing or accessing the files on these computers.I am trying to add a fifth computer to the workgroup. I have added the new computer and can see the other 4 computers. However, every time I try to access any of the other 4 computers on the workgroup, I am asked for my network username and password. It doesn't matter what I put for the username and password - nothing works. It continues to say "Logon failure: unknown username or bad password".
View 1 Replies
ADVERTISEMENT
Nov 8, 2011
I have two computers running windows 7. One is a laptop, one is a desktop. Both are connected to the same router. The desktop is direct wired via ethernet, and the laptop is wirelessly connected.I set up a homegroup and successfully connected both computers to the homegroup.If I share one of the "Libraries" folders on either computer, it instantly shows up in the Homegroup folder where shared items should appear. Any other documents or folders that I share from either computer do not appear, no matter what I try.I right click, choose "share with" and then "homegroup read/write". It doesn't appear accessible from the other computer. I choose "specific people" and then add "everyone," "guest" and "homegroup" all with read/write, and it doesn't appear on the other computer.
View 1 Replies
View Related
Sep 18, 2012
at my place of work I have my own desktop PC which is running Windows XP, we are all using Windows Server 2008 and have the ability to connect from home using a VPN and RDP which is pretty pants due to how slow and choppy the whole experience is.ow, I have managed to establish the VPN and actually map the main shared drive on our service without the need to windows RDC however I cannot seem to do the same for my own desktop PC.I want to be able to map my desktop or the hard drive on my work PC but just cannot figure it out. I have tried mapping the IP address and then using my username and password however that doesn't work either.
View 7 Replies
View Related
Jan 24, 2011
I had a Dell Laptop with Win7 64-bit. But there was a problem and it wouldn't boot anymore. The problem is that there are some very important files in that laptop. So, I got that hard drive out and connected it to my Toshiba (Win7, 32-bit) as an external drive. I was not able to access the 'user' files from the dell. When I tried to open it, I got an error message 'access denied'. So, I went to properties --> Security --> Advanced, and changed the permissions to everyone. Now, when I open the folder 'Documents and Settings', it opens the folder on my Toshiba, and not the actual files that are on that hard drive. I need to get those files out of there.
View 7 Replies
View Related
Jun 4, 2012
I have two networked computers belonging to the same workgroup: one with Windows 7 Ultimate SP1 64-bit and the other with Windows XP Pro SP3.On the XP computer, I shared a folder allowing only the access to the Administrators group.Now, from Windows 7, I can see this shared folder, but when I try to use it, the no authorization message is displayed.Why the Login window is not displayed?
View 4 Replies
View Related
Feb 6, 2013
computer shuts down every 30 min totally- I have a work group for home- use through comcast, running windows 7- on hp computer.
View 2 Replies
View Related
Jun 27, 2009
I am having difficulties accessing the network share to my Windows 2000 printer [printer attatched via USB to Win2000 computer, shared among all computers]. Both computers are behind a router, and are on the same workgroup.
My Vista machine did not have any problems accessing this printer or authenticating to Windows 2000, but Windows 7 seems to. The problem is when I go to connect to the PC, I am prompted for a username and password, but upon entering a valid one, it does not connect and comes back as invalid.
I attempted to navigate to the share manually through the "add pritner" device, but this did not work either. [Giving //computername/printer]
Using Windows7 RC1, build 7100 and Windows 2000 SP4. No difficulty sharing or authenticating on the LAN with any other OS.
View 4 Replies
View Related
Nov 21, 2009
I have two computers, 1 running Windows 7 and 1 running Windows XP. We'll call them 7 and XP.
Never computer can see shared files or directory even through both have it turned on through the "Network ICON"
So here is the spin
If I type Computername on 7 I can see all my shared directory and files (with access to copy them over without a problem) Same on XP
I've even installed the printer that is on XP onto 7 (although it's can't seem to actually print at this time)
Based on the fact that I can type computer name and get access on both computers I would imagine all my settings are correcct... but like my spelling.. something must be off
Any ideas?
Both computers can access the internet
View 9 Replies
View Related
Jan 28, 2013
I have three computers all running Windows 7 Ultimate x64, one of which functions partly as a media center (hosting music etc), the second and third being my office workstation and laptop respectively. The media center has a hard line to my cable modem (via Trendnet wireless-N router) while the latter two connect via wireless; the workstation via a wireless ethernet hub and the laptop via it's integrated wireless.I currently have all of my media folders shared via homegroup on the media center.
My laptop (Lenovo Thinkpad W500) can access all of the shared folders.My office workstation, while I can "see" the shared libraries/folders on my media center, hangs (the explorer window appears to be perpetually loading) whenever I attempt to open any of the folders. Sometimes when this happens I can kill/restart explorer but ever so often explorer itself will be unable to restart and I will have to reboot the entire machine.I have Windows Security Essentials running on both machines - all three are almost identical with respects to the installed software.I have tried reconfiguring the homegroup multiple times, flushing the dns cache, resetting and cycling the router, and have even swapped out wireless adapters (on the problematic workstation) to no avail.
View 9 Replies
View Related
Jan 18, 2012
I've been working with I.T. for years, and when I went to a client's last night to share a drive over the network so they can install a program on a secondworkstation and use the database on the original machine. Anyway, sharing this drive shouldn't have taken me more than five minutes. However, I'm encountering problems I've never seen before. The Win7 PC sees the Vista PC on the network, but not any of the shared drives. And when I try to explore the Vista PC from the Win7 PC, I get an errors: ""Your computer appears to be correctly configured, but the device or resource (Vista PC) is not responding."Both PCs are on the same network, obviously, AV software and Windows firewall disabled on both, Homegroup off on Win 7 machine, both machines on same workgroup "WORKGROUP," set with static local IPs/DNS, etc., and both able to access network resources and the internet. One thing I HAVE noticed, however, is that when exploring the network on the Vista PC, I can't see anything (including the Win7 machine,) except the Vista PC itself and the router.
Does anyone have any ideas as to what's wrong? I've tried pretty much everything I can think of. Even the SFC on the Vista PC didn't find any issues. I've checked the services, and all that should be running are set to Auto, and are started and running. I've looked for hours online, trying every possible option I can find, to no avail. I'm completely stumped! Never in my years in IT have I encountered this.
View 1 Replies
View Related
Dec 22, 2012
to get microsoft shared fax to work. Need driver?
View 1 Replies
View Related
Mar 28, 2009
trying to change the workgroup name in Windows 7 Build 7057. I think this is why Windows 7 can't see the XP machines on my network.
View 5 Replies
View Related
Jan 31, 2012
I am running Windows 7 on six computers. I can see all of the six and they can see mine. I have finally figured out through some internet research, how to get their computers to access mine. However, when I go from my computer to theirs, I get asked to enter a network password. All of the password protection is off. It's saying something I'm not understanding underneath the user name and password request boxes. It says Domain: and has my PC name on it. How can I get the access to go on their PC's?
View 5 Replies
View Related
Oct 24, 2012
we have a NAS drive used for backup & would like to prevent it showing in Windows Explorer.Individual shares are already hidden with the $ append, but we'd like to 'loose' the drive too.The NAS is a Buffalo TeraStation Pro, the PC's run Win 7 pro.
View 2 Replies
View Related
Jan 7, 2013
I have a Windows 7 Pro 64bit SP1 laptop that for over a year was happily on our hardwired work workgroup. A couple of weeks ago I formatted the laptop and ever since I am able to see and use the networked printers but can't see any computers on the network through the Network section on the Windows 7 pc.I am so blocked out that even my own pc, which does show up in networking, rejects my connection attempts.I can access the internet.I can ping other pcs.I can remote access to other pcs.I only can't access shares and browse other pcs.The other pcs on the network are a combination of WinXp and Win server 2003.I have tried the network sharing and registry edit fixes that are regularly proposed. I have turned off the win firewall and uninstalled Norton.
View 4 Replies
View Related
Oct 12, 2011
I have tried to enable the $ shares on a windows 7 64 bit machine in a workgroup.i have tried the regedit that is suggested on the internet and added the Qword without success. Has anyone successfully done it?
View 7 Replies
View Related
Apr 17, 2012
I have extracted a HDD from an old PC that ran on Windows XP. I have put it into an enclosure and connected to my Windows 7 Home Premium PC via USB.I cannot open a VHD file. Can I do this with my limited PC knowedge ?
View 2 Replies
View Related
Dec 26, 2011
a friend of mine is trying to access files residing on a vista pc residing on the same network as his 7 pc in order to copy them over. cunningly, both pcs have exactly the same network name albeit one in capitals and one in lowercase although i am pretty sure this does not mkae a difference. can anyone tell if this is where the problem lies, especially since another vista pc on the network shows up fine
View 1 Replies
View Related
Jul 17, 2010
So I've been using my Windows 7 Ultimate 64 bit install on my Sony AR670 laptop for a couple months straight now with no real issues but this one that started last week with no apparent cause and is getting very annoying.The system 'hangs' or 'freezes' in a way when I do certain things like create a new file/folder or select a file from a 'browse' file box, especially say when I upload a file to a forum, like this one, using the "Manage Attachments" option... I use Chrome but this happens even in Windows so I'm sure it's not Chrome related... it has something to do with file access is my guess.During the 'hang' I can still move the mouse and scroll windows but I can't press buttons, open menus, or issue any 'commands' if I do I get the windows 'alert' sound and nothing happens. The length of time of the 'hang' varies from a couple seconds to maybe 15 seconds or so when really bad.Because it's so hard to describe exactly I haven't had much luck searching for a similar problem.It also happens when renaming or moving files... The file will seem to revert back to its original name for a few seconds during which time I can't really do anything. If I try to rename it or move it again I get a message the file no longer exists then it will change to the name I gave it the first time.
View 8 Replies
View Related
Jun 5, 2011
I had a 3 computer network all running Xp - simple to setup and never any problems. Changed computer 1 & 2 over to Windows 7 Pro and setup workgroup. Have tried everything I could find and so far nothing works. Probably some little ole setting I have missed. Here's what I have
[code]...
View 9 Replies
View Related
Jan 5, 2013
I have 3 computers on a LAN. Two run XP (pro) one runs Windows 7 all current.
They are all in the workgroup MSHOME. Homegroup on Windows 7 is unassigned. From Win 7 I can access the XP boxes. From XP I cannot connect to the Windows 7 box with the message ... "logon failure: the user has not been granted the requested logon type at this computer"
View 3 Replies
View Related
Feb 17, 2012
I'm running on a relatively new install of Windows 7 64bit Ultimate. I recently (about 2-3 weeks ago) installed a new HD and decided to have a fresh start so everything was formatted followed by win 7 install. Everything has been running great up until mid day yesterday. Out of what seems like nowhere I experienced 6 or 7 BSOD's yesterday and from what I could tell they occurred when I tried to do any of the following: 1. Access drive D and play a video file (This is the new HD, it would instantly BSOD). 2. Access internet within 1 minute of startup.
Since yesterday I haven't had any BSOD's and have had the computer running, I haven't tried to play any videos off of HD and haven't reset my computer since (hoping that whatever it was has gone away, although I'm sure it hasn't). For the record I have accessed some music files on drive D without any issue, as well as several word and excel documents (not sure if that makes any difference?)I have a feeling it may have something to do with my new HD that I installed, but have no idea what it could be as it was running without issue up until yesterday (for at least 2 if not 3 weeks).
My system specs are as follows:S: Windows 7 64bit UltimateManufacturer BIOSTAR Group Model A740G M2+ Total amount of system memory 6.00 GB RAMSystem type 64-bit operating system umber of processor cores 2 isk partition (C) 272 GB Free (298 GB Total) isk partition (D) 1630 GB Free (1863 GB Total) isplay adapter type NVIDIA GeForce GTX 460 other info:-all drivers should be up to date to the best of my knowledge- i've looked around and have seen a lot of recommendations to run memtest? I have yet to do soI've enclosed a system health report and minidump file as outlined on forum requirements.
View 3 Replies
View Related
Dec 28, 2012
Whenever I move folders from my shared folders ( Users/public/public documents for example) it copies the files instead of just simply moving them. The folders are on the same hard drive/partition so there does not seem to be any reason it should start doing this. I dont know what I could have changed on the computer to cause this to happen either. it is quite a frustrating problem however because large files take a while to transfer when they should be moved instantly.
View 6 Replies
View Related
May 9, 2011
I am running winows 7 ultimate 32bit as a server, i have the c: drive shared to all 13 users on the network. All 13 computers are running windows xp pro. The problem that I am having is this:When i open up the shared c: drive on a windows xp computer, and open a folder to view files, it only shows 122 out of the 227 files.when i open up the c: drive on the windwos 7 machine, i can see all 227 files.when i open up excel or word, and open a file that is stored on the windows 7 machine, it will open fine, but when i try and browse for the file that is stored on the windows 7 machine, it does not show it.now here is the interesting thing:when i open up the shared c: drive on another computer running windows 7, (not the server) i can see all 227 files and have no problems.i have multiple folders, ex: mypics2008, mypics2009, mypics2010, mypics2001, mydocs2000, mydocs2010, all shared off of the c: drive on the windows 7 server. this problem started a few weeks ago, i was able to see all the files in every shared folder off of the windows 7 server through all of the windows xp pr machines a month ago, and all of a sudden in the past few weeks, i am no longer able to see all of the files shared off of the server.i have rebuilt the index on the windows 7 server i have removed and redone ALL security, and sharing settings i have checked, rechecked and checked again all the file sharing settings I am stumped, and i consider myself knowledgable with computers.
View 4 Replies
View Related
Aug 6, 2011
I have a couple of desktops and laptops connected on a wired network. I have no problems accessing and copying files. This isn't about access denied or other machines not being visible. My issue is that one of my laptops can be accessed and I can move through all shared folders but sometimes when I try to copy a file from this machine the copy dialog opens but no data is being copied. The transfer rate stays at 0kb/s. Rebooting this machine helps partially, but file transfers will start at well below 1Mb/s and very slowly rise some during the copy. I don't have this issue with any other machine. In fact, I have never seen an issue like this. Most people have problems with read/write permissions, again, that's not my problem. Data just won't move when copying sometimes. All machines are running Windows 7 ultimate and avast 5. The laptop with this issue is a Toshiba e205, core i5, 4gigs ram, atheros ar8152 ethernet. Should also mention that I don't have a problem with other traffic on this connection such as internet or like I said accessing shared files in explorer. They just won't copy.
View 3 Replies
View Related
Jan 8, 2012
I have a problem on my tiny home network. I have 1 desktop with windows 2000 and laptop with windows 7 home. I shared folders on windows 2000 and removed all passwords. it means when i boot 2000 system i am not asked for any credentials. But when i tried to see those folders from windows 7 i am always asked for login and password. I also have Andriod tablet and it access those folders (on win 2000) without problem. Also i cannot access shared folders on my win 7 laptop from this tablet (it also is asking for login and password on win 7 but win 7 does not have it).
View 1 Replies
View Related
Nov 30, 2009
I have few XP Pro PCs and a windows 7 Pro x64. The XP PCs can see and access the shared Windows 7 but the Windows 7 couldn't. Windows 7 can see the XPs but when i click on the XPPCs it said Windows Can't Access XP-pc. I click the Detail and it said Network Path Wasn't found. I tried to Diagnostics and it couldn't find the problem. It looks like firewall blocked to me but i disabled windows firewall and security center from windows services. XPPCs don't have any firewall. from Windows 7 i can ping those XPs. I enabled most of the services related to the network.
From the windows7 can't open the its shared folders either. it said the network path was not fould
Is there any one has the same problem?
View 4 Replies
View Related
Jul 15, 2010
Is it just me or has Win 7 stopped the ability to move more than one group of files/folder at a time?
For example, I'm trying to transfer some music album folders to a USB or another folder. I drag and drop the first album in there, but I have to wait to the progress box to finish before I can drag the next one/group in there.
I KNOW this was never a problem with XP, where every group of files/folders your moved/copied would open a new progress box, each doing their own thing. Why would such a basic function have changed?
View 5 Replies
View Related
Dec 15, 2011
I have a group of MP3 files in a folder (MyBestMusic) and want to create a playlist (same name) to play them as a named group (playlist). I am totally new to Windows, my daughter in law gave me this computer, I'm 63.
View 2 Replies
View Related
Dec 27, 2011
I have 4 worstations in the same HomeGroup I can access the files of workstation 1 from the two workstations but the 3th one in the 3th one the the shared folder appears but when I try to aceess the files inside I get an error can't acess contact administrator the pasword protection is disabled in the workstation 1 and I can access the files from the other two workstations so I have no clue what is going on I have disabled the firewall and Norton IS on both workstations but still can't access the content of the sahred folder
View 3 Replies
View Related
Apr 24, 2011
I just bought an Alienware laptop with windows 7 home premium 64bit. As soon as I got it, I connected it to my network and attempted to access my shared files, but it wouldn't detect any of my computers on the network. I have an iMac with Snow Leopard, sharing a few hard drives, & an old Qosmio with Windows XP Media Center Edition, sharing one hard drive. The iMac and Qosmio both detect each other with no issues, sharing files has never been better. I don't remember doing anything special, other than sharing files, on Windows XP, for the files to be present on other devices. On Snow Leopard, I added the XP account, & the Windows 7 account. I enabled sharing files, specifically, AFP & SMB.
And then checked both XP & Windows 7 accounts to assure accessibility. The Group (Workgroup) is the same across all 3 devices. XP detects my iMac & can access the files, & the iMac can detect XP & access the files. Now, my iMac can sometimes detects the Alienware/Windows 7, but since I'm not sharing any files/folders on it, it can't access it. My main problem(s): Windows 7 never detected XP. Once, Windows 7 detected & accessed all files on the iMac, but after shutdown/restart (Possibly updating Windows 7 to Service Pack 1), Windows 7 does not detect or show any computer on the network folder other than itself.
If I turn on "PS3 Media Server" on the iMac, Windows 7 detects it, but when I open it, it takes me to Windows Media Player, which then tells me that the PS3 Media server is empty. On Windows 7, Advanced Sharing Settings, "Home or Work" network settings (I'm have my network set to "Home Network"), Network Discover is ON. File & f=printer sharing is ON. Public Folder Sharing is On. Media Streaming is On. File sharing connection is set to 40- or 56-bit encryption. Password protected sharing is Off. HomeGroup connections is set to "Use user accounts and passwords to connect to other computers". I have Kaspersky Internet Security 2011, if that matters. XP has it as well.
View 3 Replies
View Related
