3rd Monitor Is Not Working
Feb 13, 2011
I run the sound booth with my church and we need 3 monitors to run at the same with each other, we have the sound booth monitor and the front projector to run correctly but we need the stage display to run to. The problem is that windows 7 is detecting the monitor as well as MediaShout 4.5 except we can not get anything to display on it, let alone having the 3rd projector even detect that it is connected to the computer.We have a gateway FX6840 with 8 gigs of ram, 1.5 TB HD Space, the problem projector is a BenQ PB8260
View 6 Replies
ADVERTISEMENT
Jan 1, 2013
I have a Dell laptop & have been trying to use it on a external monitor but its not working. It has worked in the past but now its saying cable not connected on the external screen. FN f8 isnt working for it anymore. Any ideas how to get it working again ?
View 3 Replies
View Related
Jun 2, 2009
im running build 7100 and after hearing that windows 7 supported heterogeneous graphics cards i was excited to try it out.
ive tried but i can't seem to get it working.
i am using a 8800GT PCIe and a FX5200 PCI.
my first question is, is it not working cos the fx5200 is too old?
View 6 Replies
View Related
Dec 8, 2011
I have two computers. The monitor (Acer) on #1 quit working. I switched monitors. #2 monitor (samsung) didn't work on #1 either. I thought it might be my computer. My brother got his monitor working with it. We thought it might have been my cables. I bought new ones. I tried it (with new cables) with monitor from #2. Didn't work. I put the orignial monitor back on, and it works. Now the monitor from #2 doesn't work on #2. I think it might be a driver issue, but not sure.
View 1 Replies
View Related
Nov 21, 2012
I just bought a new 23inch Samsung Monitor (S23B370). It have full HD support and also have an HDMI port. I bought a HDMI cable which have HDMI on both ends. I have a VGA (Nvidia 210) which also have an HDMI port. I connected the monitor's HDMI out to the VGA's HDMI port with the new cable and booted. Nothing came. I even set the Monitor's settings to HDMI. But nothing happened. It says check display cable. Why is this? How to fix it? Have I done something wrong?
View 1 Replies
View Related
Dec 28, 2009
So I got a new monitor for xmas, the LG Flatron W1953T and I wanted to get it running with my Dell monitor. I have an onboard NVIDIA GeForce 8300 and at first just tried to plug the new monitor into the DVI port but I think it's broken or something.
Anyways, I bought this Triton Technologies External VGA video card that I just plug into a USB port, and now I have both monitors running through VGA, and my second monitor is up, but the resolution just looks terrible on the second one, and when I go to adjust resolution or whatever it says I have only one monitor and if I hit detect it doesn't come up.
In my devices menu it says I have the dell menu, and then two other "Generic non PnP monitors" even though I only have one other monitor connected.
I also go to my NVIDIA control panel and it doesnt say the second monitor is detected.
Both monitors are working, like I see my desktop background on the other monitor and I can drag stuff over to it but its just not detected or something idk. I want to download Ultramon too, (Or should I get something else w/ windows 7? I heard you cant have two taskbars w seven.
View 1 Replies
View Related
Feb 28, 2012
I bought a Samsung HDMI monitor yesterday (model: S22B370H) for my Z68P-DS3 motherboard which has only an HDMI output. The monitor was working fine when connected to my laptop, although with some flickering. When I connect to the PC, rarely it shows a display till the Windows Startup booting screen, after which it is totally blank. The monitor is recognizing and HDMi input but is not displaying it.
View 1 Replies
View Related
May 29, 2012
I have this double sided 3.5mm jack. One end went in to the line in circlular slot on the monitor, the other went into the headphone slot on my desktop.
It was working yesterday, thenm it stopped so I redownloaded the driver. It worked again. However, today it isn't working and I've tried reinstalling the driver.
View 7 Replies
View Related
Oct 30, 2009
A friend just bought a new HP laptop running Windows 7 Home. They want to connect their old Gateway monitor to the laptop to use as a dual-screen setup. They shut down the system connected the monitor then turned on the monitor and booted the system. When the desktop displays on the laptop it also comes up on the external monitor for just a second and then the monitor goes black. They have also tried connecting the monitor while the laptop was already up and running with the same results. The monitor had been working fine with their old Windows XP desktop system.
View 6 Replies
View Related
Mar 30, 2009
I have build 7068. From the start my screensaver and power options are not working. The problem is sometimes they DO work. I am having trouble diagnosing it because of that fact. What would cause this? I just want the monitor to turn off 30 minutes after stop using the computer. That's the main issue. I go to "power options" and set it at 30 minutes and never put to sleep. What am I missing here?
View 4 Replies
View Related
Jun 12, 2009
After I installed Windows 7, I had by tv connection still showing as a second monitor. Just the other day the display no longer shows anything but the sound is still coming from the tv. In properties the display only shows 1. I also tried detecting and nothing happened. I have a Radeon 9000 video card.
In device manager, other devices is showing video controller with a yellow !.
Monitor is showing - Generic Pnp Monitor
Display is showing Radeon 9250 9200 series
View 1 Replies
View Related
Feb 12, 2012
Dual monitor is not working for me on my Windows 7 laptop. I assume this is related to some video drivers
View 1 Replies
View Related
Mar 8, 2012
I HAVE RECENTLY INSTALLED WIN 7 ARC GAMER EDITION. I THINK ITS JUST REBUILT OF ULTIMATE.WHEN I CLICK RESOURCE MONITOR ICON IN TASK MANAGER OR IN START MENU NOTHING POPS UP.
View 3 Replies
View Related
Mar 2, 2011
I have a IBM Thinkpad T30 with a graphics card ATI Mobility Radeon 7500. I have an external monitor plugged up. On xp I can dual split easily! I just installed windows 7, and it doesn't detect the external monitor. I right click desktop, and select screen resolution. I click detect and the only screen detected is my laptop screen (not the vga external screen). I checked the IBM website, and the video drivers are only for windows xp. I tried to install the driver for xp on windows 7, and an error pops up and says "Setup was unable to complete the installation. Try to setup your display adapter with a standard VGA driver before running setup"
View 2 Replies
View Related
Feb 25, 2010
i just received my i7 920 computer today and i got the radeon 5770 1 gb graphic card
after installing windows 7 ultimate i tried to set up the dual monitor and under display it only recongizes 1 monitor while the 2nd monitor does what im doing on the first monitor how can i correct this??
View 1 Replies
View Related
May 9, 2012
Yesterday, I got a balloon notification saying that there were some Windows Updates available. I like to keep my PC up-to-date, and since I wasn't in the middle of anything urgent I had my Windows 7 32-bit PC download and install them. WU asked to reboot my computer, so I got to a stopping point and clicked reboot.When I rebooted my PC, my 2nd monitor stopped working and wouldn't detect.So I downloaded installed the latest drivers and restarted, nothing. Tried rolling back to a restore point before the updates, nothing. Uninstalled the video card and rebooted, nothing.
I have an ATI Raedon 3600 Series video card, installed into a Dell Optiplex 360, running 2 Dell 19" LCD monitors. Nothing super fancy or extravagant going on hereI am a bit at a loss. I was going to maybe take out the video card and try reinstalling it physically and "softwarically". But I do not think that will aIt was working fine for months, and so I am guessing it has something to do with the Windows Updates that were installed.
View 2 Replies
View Related
Sep 17, 2009
I'm on a Sony Vaio laptop with a second monitor connected with a VGA cable. I just switched from Vista to Windows 7 and my second 22" monitor is not being recognized under the resolution screen. It worked perfectly fine on vista just hours prior. I tried hitting the detect button, reconnecting the monitor, and restarting. What am i doing wrong?
It might be my graphics card, im pretty sure i have a nvidia geforce 7200m gt. cant seem to find drivers for it anywhere. My computer keeps telling me all my drivers are up to date, yet my second monitor is still not recognized. this doesn't make sense. Should i just go back to vista?
View 5 Replies
View Related
Aug 4, 2011
2 weeks ago my Ink Status Monitor for my Epson Stylus Photo R360 was working fine (Windows 7 Ultimate 64 bit),then suddenly it just stopped working (I'm not aware of any recent changes I had done that may have affected this). It still works on the printer display,but not on the PC. If I select "printer preferences" it is greyed out,but the box to disable it is unchecked. I have uninstalled and re-installed the drivers countless times now (Windows keeps wanting to install Epson ESC/P2 which does not monitor),but I have downloaded the up to date driver from Epson and still no joy.
View 9 Replies
View Related
Dec 24, 2011
I've recently purchased a Samsung T23A750 monitor and to my disappointment when I try to watch a movie the built in speakers are not functioning. I have a Sony Vaio Z216GX connected via HDMI to the monitor (HDMI-DVI) port. I can definitely see the video, but no audio is playing from the speakers. The built in speakers are not at fault- I did a self-diagnosis of the monitor and the speakers seem to work fine. I also set the monitor as the default for the audio and even when Win 7 says its functioning properly, the speakers still don't work. Conversely, setting the default to my PC speakers work fine. I'm sure its not the HDMI cable- I used the same one to hook my pc to my tv with everything working fine.
View 4 Replies
View Related
Jan 20, 2013
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies
View Related
Jul 16, 2010
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies
View Related
Aug 14, 2012
I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
View 2 Replies
View Related
Jan 6, 2010
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
View 3 Replies
View Related
Jul 4, 2011
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies
View Related
Oct 21, 2010
I recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
View 2 Replies
View Related
Feb 3, 2011
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
View 4 Replies
View Related
Sep 27, 2011
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
View 2 Replies
View Related
Oct 22, 2012
I have a HP dv6910us Pavilion and the DVD is not listed in Device Manager. DVD Tray opens and light comes on but does not play DVD. 1st USB port on left side gets - USB Device Not Recognized.One under it works and one on the right side works.OS Windows7 Ultimate. It is running kind of screwy so I wanted to reinstall Windows7 but with the DVD not operating Can't do it. Seems like maybe something in the register got erased or corrupted. If I can get the DVD and USB port to work I won't have to reinstall Windows 7
View 2 Replies
View Related
Sep 2, 2012
The problem likely started when I cloned my drive to a new Seagate drive using a Seatools *Seagate** utility, which I believe is actually made by Acronis. The final fix was installing new drivers for the Hard drive from Intel "Intel Rapid Storage Technology"
Symptoms =
Failure code when trying to start indexing = 0x8e5e0247
Search function would not work properly
Indexing was not working
Could not get Windows update to install
windows 7 indexing is not running acronis clone Intel Rapid Storage Technology 0x8e5e0247 windows update not working
View 4 Replies
View Related
Nov 13, 2009
i have a problem with my mouse cursor.... when it is performing something it become busy... right.. and sometimes the mouse cursor will rotate... or the working in background.... it doesnt rotate anymore.. i mean the windows aero scheme.. i am using a windows 7 os... i dnt know what is the problem,.. i alreay have the tuneup utilities 2010.. still no progree.. plls help me resolve my problem
View 9 Replies
View Related
Aug 20, 2012
I'm using Windows 7 Home Premium.My wireless connection has been working on and off for a while, but now it just refuses to work.The other computers in the wireless network are working just fine, so it must be definitely something in my laptop.I can detect the network just fine, with good signal.It says:
Media State: Enabled
IPv4 Connectivity: No internet access
IPv6 Connectivity: No internet access
Also, in the activity there are Bytes sent and received, but I cannot connect to any webpage either with Chrome of Firefox I'm using McAfee Security Center. I tried turning off the firewall, but it still doesn't work.
View 3 Replies
View Related
