Sony Vaio Laptop Audio Output HDMI Not Working In Samsung Monitor T23A750
Dec 24, 2011
I've recently purchased a Samsung T23A750 monitor and to my disappointment when I try to watch a movie the built in speakers are not functioning. I have a Sony Vaio Z216GX connected via HDMI to the monitor (HDMI-DVI) port. I can definitely see the video, but no audio is playing from the speakers. The built in speakers are not at fault- I did a self-diagnosis of the monitor and the speakers seem to work fine. I also set the monitor as the default for the audio and even when Win 7 says its functioning properly, the speakers still don't work. Conversely, setting the default to my PC speakers work fine. I'm sure its not the HDMI cable- I used the same one to hook my pc to my tv with everything working fine.
I have setup extended monitors, and when I close laptop lid video on TV stop playing and shows me desktop from laptop. Tried "do nothing" when lid closed but that didn't do the trick.
My old Vaio VGN-Z (Nvidia Geforce 9300GS) had no issues when closing laptop lid.
My TV is a Samsung LE40C580 and it connects to internet through ethernet cable. The TV can find my laptop when I go onto sources but my laptop device does not find it. From Windows media player I allowed streaming through the network but when I get onto Media Play(TV's Media Player) and choose the video folder for example it says, 'No movie files on current device. Select another category'. Same for Music and Photos.How am I supposed to fix this?
I'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.
I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.
So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.
I only have this problem with 7, so I know it is not a hardware related issue. I simply can not get any sound out of my graphics card (seemingly) through HDMI. I have my bios setup to play audio from it. I've followed what everyone else has done when using the search, I have zero success. It worked before using 7, so I am 100% confident that this is a 7 issue (because it still works on Ubuntu!).All drivers and software is up to date too.
Cannot seem to get the webcam to work in any application, I think I need correct drivers or something, been on the sony website and downloaded everything that I thought would be relevant to no avail...
For example when I use Windows live messenger it says "we cannot connect to your webcam, your webcame may be in use by another program, please check it and try again"
splitting audio to two separate output devices in windows 7 x64.I'm preparing my primary PC to act as a Media center. Ideally I'd like for someone to be able to watch netflix, or online videos on the TV with audio and video running through the HDMI cable while someone else can use the PC monitor & desktop speakers to game or do other tasks. The issue is both gaming applications and chrome (or other web browsers) only support audio playing through the default audio device in windows 7. As a result, i'm forced to pick whether i want all audio to play from the TV speakers or the desktop speakers.
Summary of Specs:
Asus M2N-Sli Deluxe mobo - rear port used for desktop speakers Radeon HD 6870 - HDMI for TV sound Athlon 64 x2 6000+ 4 gigs ram
Doing some research I've learned this was a feature in win XP but was dropped in vista/7. On windows 7 support forums the Microsoft Support reply that it was an intentional omission win both windows 7 and vista.I know how to direct the audio from winamp, media player classic, and WMP to the output device of my choosing.I have tried three third party applications:Virtual Audio Cable: lets me play the same audio out both the HDMI connection and the desktop speakers.IndieVolume: shows promise as it lets me direct audio from applications to the output device i choose, but all attempts to get the software to change my web browser's output device haven't worked. I also think the software is not supported for windows 7 x64.J River - Media Center 17: media center software with an embedded web browser. Using this media center i can direct the audio from any media on my computer to the audio device of my choosing, but the embedded web browser plays out of windows default output device not the audio device i choose.
I bought new computer about 6 month ago. Hdmi worked fine with my tv and I don't know whats wrong now. I know its not the cable because I bought another one and the tv is certainly not because it has 2 hdmi. The computer as I said is almost new so a would be very happy if I wouldn't have to give it repairing.
My 6970 xfx works great except when I connect the hdmi to my receiver. The monitor just shuts down. Is there a procedure I need to do to prevent it? When I disconnect the hdmi the monitor turns on...
I was working on an email Saturday when my Sony Vaio stopped working & flipped over to the black & white Vaio screen. Since then, I've been able to reboot it once, but it flips right back over to the Vaio screen. At one point, I was able to get to the Advanced Boot Options menu by hitting F8. I tried to restore to the last known good configuration. It got to the Windows logo screen, then went back to the Vaio screen, then went to the "Operating System could not be found" screen.The computer has a One Touch Web Access Without Booting Up feature.
I just bought a new 23inch Samsung Monitor (S23B370). It have full HD support and also have an HDMI port. I bought a HDMI cable which have HDMI on both ends. I have a VGA (Nvidia 210) which also have an HDMI port. I connected the monitor's HDMI out to the VGA's HDMI port with the new cable and booted. Nothing came. I even set the Monitor's settings to HDMI. But nothing happened. It says check display cable. Why is this? How to fix it? Have I done something wrong?
I bought a Samsung HDMI monitor yesterday (model: S22B370H) for my Z68P-DS3 motherboard which has only an HDMI output. The monitor was working fine when connected to my laptop, although with some flickering. When I connect to the PC, rarely it shows a display till the Windows Startup booting screen, after which it is totally blank. The monitor is recognizing and HDMi input but is not displaying it.
with the audio and tough pad drivers not working in windows 7. I up-dated windows XP to Win7 ultimate, and now their is no sound and the tough pad does not work. These are the error codes from msinfo32!
A.High Definition Audio DeviceHDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_103C30B2&REV_1000\4&166FA85F&0&0001This device cannot start. B.Base System DevicePCI\VEN_1180&DEV_0592&SUBSYS_30B2103C&REV_0A\4&1753FBD&0&4BF0The drivers for this device are not installed.
I did a clean install of 64 bit Win 7 Ultimate over 32 bit Vista Business on a Vaio VGN-SZ750N. It only finds the screen on the laptop. Neither Geek Squad nor Online Sony customer help can fix this. Can someone help me?
I have a Toshiba L755 Laptop with Intel Graphics and Media Control Panel. I hooked up the laptop via HDMI cable to a TV monitor. It worked great, but afterwards the screen will not fill up. I can't adjust the overscan and am stuck.
I built a barebone kit and installed Windows 7 Ultimate 64bit, I installed all the drivers correctly but for some reason Windows keeps detecting the front audio jack as if someone is repeatedly pushing in and out headphones(no pun intended). Audio doesn't work at all through front and back audio jacks, only HDMI. I only get static from the audio jacks.
My Sony laptop VGN-FZ21Z VISTA home premium 32 bit has a little red x next to the audio on the bottom right toolbar. No Audio output device is installed is displayed when I hover over it. I have gone into the device driver to check the problem and no audio device is installed. I have tried to download the driver from the Sony UK website and it says object not found restart computer and try again. There is then a prompt to install with the correct settings and it tries again and says I have the wrong device. I have also reset my computer to factory settings and still that little red x is there. I have looked everywhere for the correct device driver but can't seem to find one for this model.
I just did a clean install of Windows 7 Ultimate 64 bit on a Sony Vaio VGN-NS190J. I have gone to the Sony site and downloaded and installed all drivers, etc. Everything works great and there are no errors in Device Manager, but the audio device does not show up. When I go to Sound Properties it shows No Audio Device Installed. I downloaded both versions of the audio drivers from the Sony site, both Realtek drivers, and when I run them the install starts, I click few a few screens to start the install and I get the box saying it's checking the system and installing. The box then just closes and it never installs. I even connected to a Sony tech who took control and tried to fix it but was not successful. They said it must be a hardware problem. The sound was working fine on Vista before I upgraded to Win 7.
I recently installed a new HDD (Seagate ST9500424AS; p/n 9RW143-567) in my Sony VAIO VPCEH11FX and installed the OS using the Sony VAIO Recovery Media Kit (VPCE_10FX Series 989203008). During the installation, I selected the default or normal settings. A short while (1-2 weeks) after the installation was complete, I noticed that the track pad was not working after enabling it using Fn+F1. (The pointing device dialog box DOES appear when I press Fn+F1 and shows that it will toggle between enable & disable). I took the computer into Fry's (where I bought it) and they booted a different OS (I think it was Windows XP) using a CD. Using this OS, the track pad worked. So it was confirmed it wasn't a hardware issue. I proceeded to contact Sony. They had me do the following:
1) download the latest drivers & driver updates and install both. This didn't fix the problem. 2) uninstall 'Alps Pointing-device for VAIO' and run the .exe files for the driver & update. This didn't fix the problem. 3) boot the computer to recovery mode (press F10 when it starts); I noticed that the track pad was working in this mode. 4) Confirm that the other ALT keys functioned properly. (they do function properly)
The Sony rep asked me to confirm the type of HDD I installed (I forget what specifically he was interested in), but upon my reading him the part number, he confirmed the HDD was compatible.The Sony rep then suggested I either recover the system to a previous version/date and see if the track pad is working. (he seems to think some software I installed might have prevented the track pad from working) He also suggested I could reformat the HDD and reinstall the entire OS. I've balked at doing either, as I'm guessing there is an issue with the registry.
I've been asked to take a look at my mother's laptop. A 10lb medicine ball fell/rolled onto the keyboard. The computer in question is an ASUS G72G laptop running Windows 7 Home 64bit. The sound symbol in the task bar has a red, circular X mark on it and says "No Audio Output Device Installed". I've tried downloading and installing the audio driver from this site but it tells me that this version of Windows is not supported, though I know for certain that this version of windows matches the driver listed:f anyone has an idea as to the underlying cause of this problem, I'd very happy to hear it. I know it seems like a hardware problem, but I'm wondering if it could have hit any function keys or something to disable the sound, as I've been told that some sort of message popped up immediately about the mouse or something, but I wasn't there and don't really know exactly what it said
I have a Sony Vaio VGC-RC110G and installed Windows 7 RC 32 bit and it went smoothly 'cept for 2 missing drivers. The main one is the sound device as it is NOT being read. I can't get any sound. I spent several hours on the net looking for a compatiable driver, and alot of people ran into trouble with the SigmaTel High Definition Audio Codec when they upgraded to Vista. Tested a bunch of drivers (from Sony site and even updated sound drivers from Dell) and none worked.
Even downloaded some program called detective driver to help me find compatiable driver but I'd have to pay $30 to activate the program. I would but Im afraid it might not find it.
I'm having trouble with my Sony Vaio VGN-FW520F with the Function Key not working i tried looking up the drives from the Sony US website and cant seem to find it. I had updated my Windows 7 Home Premium to Windows Pro and cleared my hard drive in the process.
The notebook is Sony Vaio VGN-CS21S-W. I've upgraded to Windows 7 and the multimedia buttons stopped working. I'm talking about the sensor/touch buttons. I've installed drivers and the function buttons are ok, but still without success with multimedia buttons.
I have purchased Sony VAIO E series three months back working without any issues. But after 2 months, the built-in keyboard and mouse not working after windows starts. USB mouse and other features working without any issues. To make the keyboard and mouse, i have should restart the system 2 to 3 times or uninstall the driver for same. The laptop having Windows 7 Home Premium. After the problem, i have reinstalled Windows 7 Enterprise and also did built-in system recover. Still the problem persists. Is the problem related to Windows 7 or with hardware? But once the keyword and mouse drivers uninstalled via device manager working fine. OS is 64 bit
my sony vaio's built-in bluetooth is not working. im using windows 7 32-bit. what am i gonna do?? ( i already tried "services.msc" but still it is not working.
Saw similar problem below but my computer is brand new (out the box today) Sony Vaio VPCEH14FM came with on board Windows 7 Home Premium 64bit. When I input my SD card, the card reader lights up briefly so its seeing it, but it is not appearing on my computer and when i try and run the extra drives nothing shows up. When I plug my mini sd into the usb port it works, but id like to figure out the actual sd slot for my camera?