I have a Toshiba L755 Laptop with Intel Graphics and Media Control Panel. I hooked up the laptop via HDMI cable to a TV monitor. It worked great, but afterwards the screen will not fill up. I can't adjust the overscan and am stuck.
View 1 Replies
I've just built a new computer with Windows 7 and a gigabyte brand radeon HD4890 and have been having the same issue as some other users with regard to the over/underscan.
I managed to correct the inch or so of unfilled space when displaying the desktop by using the under/overscan utility in CCC (thanks to info on this forum ^_^) but found that the problem still exists when I ran my first full-screen applications.
I installed, updated, and ran Spore: Galactic Adventures to take a look at how my system was going to handle everything, but found that the dreaded inch was back. The really odd thing was that when I switched Spore to windowed mode, the inch had gone and I could maximise to full-screen. Of course, the window header and taskbar kind of detract from the game, but this isn't necessarily an issue for Spore (which can hardly be described as immersive).
I am, however, concerned that this issue may pop up in other games where the window header and taskbar will detract from the game (if it operates well in windowed mode at all).
I plan on investigating further later today, possibly in the direction of motherboard and chipset drivers, but also testing with other games.
i tried to connect my TV to my laptop through the HDMI port.
but under the screen resolution there is only my main screen.
I have an HP Monitor 2310m model and HP Pavilion p6310f desktop computer with NVIDIA GeForce 9100 integrated graphics. I had to reinstall windows and afterwards could not play some of my games to fill monitor screen completely. (are set to play full screen)Before the reinstall, I could adjust the resolution to 1440x900 to get them to fill the screen but that won't work now. I got a few to fill it with 1600x1200 but only a few. I've read that other people have this problem but no solutions have worked. Tried changing resolution, setting full screen mode, hitting ALT & ENTER keys.
View 9 Replies View RelatedI've recently purchased a Samsung T23A750 monitor and to my disappointment when I try to watch a movie the built in speakers are not functioning. I have a Sony Vaio Z216GX connected via HDMI to the monitor (HDMI-DVI) port. I can definitely see the video, but no audio is playing from the speakers. The built in speakers are not at fault- I did a self-diagnosis of the monitor and the speakers seem to work fine. I also set the monitor as the default for the audio and even when Win 7 says its functioning properly, the speakers still don't work. Conversely, setting the default to my PC speakers work fine. I'm sure its not the HDMI cable- I used the same one to hook my pc to my tv with everything working fine.
View 4 Replies View RelatedI am having an issue with my Aurora R4 computer. I am trying to play a game using my monitor, but also to have it show on my HD TV. I have the monitor hooked with a DVI connection and out from the same card to the HDMI in the TV.
View 14 Replies View RelatedI just bought a new 23inch Samsung Monitor (S23B370). It have full HD support and also have an HDMI port. I bought a HDMI cable which have HDMI on both ends. I have a VGA (Nvidia 210) which also have an HDMI port. I connected the monitor's HDMI out to the VGA's HDMI port with the new cable and booted. Nothing came. I even set the Monitor's settings to HDMI. But nothing happened. It says check display cable. Why is this? How to fix it? Have I done something wrong?
View 1 Replies View RelatedI bought a Samsung HDMI monitor yesterday (model: S22B370H) for my Z68P-DS3 motherboard which has only an HDMI output. The monitor was working fine when connected to my laptop, although with some flickering. When I connect to the PC, rarely it shows a display till the Windows Startup booting screen, after which it is totally blank. The monitor is recognizing and HDMi input but is not displaying it.
View 1 Replies View RelatedI added speakers to my computer and now I have this message on my monitor "HDMI NO SIGNAL" Everything seems to be working etc. I can get on the Interenet, play viedeos, email and all software is useable. How do I get that message off of my monitor?
View 1 Replies View RelatedI use my tosh laptop for looking at netflix on my two TV.One is a LG other is a Sammy. Since I have had the laptop about 4 to 6 weeks it has (HDMI out) worked on both tvs no problem! The last week The LG just will not recognise the signal Like the Samsung works ok no probs there... The LG do no matter what HDMI port I use nada (No signal is what it says) there are 4 HDMI ports and none are working, I have tried about 5 different HDMI cables and still nothing?
View 1 Replies View RelatedI've noticed this anomaly now on two of my Windows 7 rigs, one each Ultimate and Home Premium; Monitors that attach via HDMI are not getting the 'power off' message from the OS. The same monitors hooked up by other means [dvi, vga] do power off just as they should per the power plan settings.
View 2 Replies View RelatedMy new graphics card has a HDMI port and I was wondering if there is any advantage of using that port to connect my graphics card to my monitor over the normal DVI port?
View 9 Replies View RelatedI have a Lenovo H405-7223-1GU that I bought in June 2011. Yesterday I bought a Philips 32" HDTV 720p 60Hz. My PC won't recognize my TV at a monitor via HDMI cable. The ports on the TV and the cable is fine because I can connect my DVD player with no issues. Most help is saying to right click desktop, click "screen resolution"and then just tell the PC it's ok to send info over HDMI. That would be fine but I can't have my monitor and HDMI plugged in at the same time. As soon as the HDMI is plugged in my monitor (VGA) goes blank then comes back on with only the background image showing. No start button, no icons, no toolbar
View 1 Replies View RelatedI connected my computer to my monitor via hdmi but there is no sound coming from my monitor. i updated all drivers and even tryed to connect the monitor to a reciever from the head phone jacks. i get sound from my computer to the reciever that way byt not thru the monitor. monitor is e2370 lg and my graphics card is ATI Radeon HD 5450.
View 9 Replies View RelatedI wanted a break from the HDMI sound through the monitor to use headphones, and after several other methods, I tried disabling the HDMI sound. That worked great, but now that option for playback device is completely gone! How do I get it back so I can use the (admittedly weak, but still functional) monitor sound?
View 3 Replies View RelatedMy 6970 xfx works great except when I connect the hdmi to my receiver. The monitor just shuts down. Is there a procedure I need to do to prevent it? When I disconnect the hdmi the monitor turns on...
View 4 Replies View RelatedIm interested in setting up a multi monitor setup.My main monitor will be for gaming, and the other will be for web browsing/server admin clients. Could i run one monitor off my GPU and the other off my Core i5's integrated GPU via the built in HDMI connector? or would this cause a confusion with windows? the reason i ask is because i cant see my ATI 6950 handeling both BF3 and another monitor,
View 1 Replies View Relatedwhen I plug my HMDI cable into my TV from my PC I lose my PV monitor signal
View 1 Replies View RelatedMy old monitor has problems turning on, I can leave it on for 30hrs before it decides to display a picture, or I can manipulate it by unplugging the DVI cable from the back, but sometimes even that takes a few tries. It's off warranty and for reference it's a Samsung SyncMaster 226BW.So I bought a new monitor and I have it plugged in using HDMI, but a problem I get is that when both monitors are plugged in the HDMI has no display until it gets to Windows, so I cannot see the boot process of my PC, because my old monitor as explained above has problems turning on. Was a hindrance today when I was tinkering with my SSD and had to go to BIOS, and frankly I'd like to be able to see in case anything goes wrong, like a BSOD or Windows update etc.
View 5 Replies View Relatedive got a problem with my new viewsonic vx2753mh-led monitor. its got 2x hdmi inputs and one vga.the vga works straight off the bat, but whenever I try and plug the hdmi in it just says no input signal detected and goes black I noticed in device manager that this was installed as 'generic non-pnp monitor' so after jumping through some hoops i managed to install the driver as 'viewsonic vx2753 SERIES' anyway this doesnt seem to have made a difference. still no input through the hdmi.I have tested to cord on my samsung tv and it worked fine so it can't be a problem with the cord or the graphics card....just some general info that might be of use:
windows 7 x64
dual monitor setup
the graphics is integrated on the intel i5 chip my display adapters in device manager says Intel(R) HD Graphics Family.it has a dvi out, hdmi out, and vga out.
I am using a Laptop with a dead screen by running an external monitor from vga port. I am trying to duplicate this monitor on Sony HD tv using an USB adapter to HDMI. On the first go around I got my desktop ...minus any task bars or icons. on the Sony plus sound but could not get the complete desktop to display. (I am thinking now this might have been resolution trouble and my icons were just out sight) Videos play fine on vga monitor but see just windows logo on Sony.
When I go to display settings I see "1/2 multimonitors" and it shows the Sony as 3. That is when I get lost. If I click on identify it shows a giant " 1" and "2" on my vga monitor. at the same time. Then my choices are duplicate, extend, and show desktop. Which should I use.? I am not sure if my vga monitor is 1 or 2.
There is also a "connect to projector". I messed around there and killed the vga monitor (my only one) Had to restore in safe mode to get back to normal vga output.
Look worse than the VGA out on my laptop? The HDMI out has black bars on the left, right, bottom and top. The VGA looks crisp and clear and fills the whole screen on my TV.
View 3 Replies View RelatedI have a HP Compaq 2230s laptop and it has a HDMI port. I use a High-Speed HDMI cable to connect it to my LG 3D Smart TV. I finds the video but it does not get the audio (partially). Once I connected, I tested for sound using the volume mixer and the "ding" is played on my TV. But when I try to play a song from my laptop, it is coming from my laptop speakers!
View 1 Replies View RelatedMy laptop is a HP Pavilion dv7-2078ca Entertainment Notebook PC
Specs here: Product Specifications*
I have my Computer hooked up to the TV through a HDMI Cable and My TV is hooked to a surround sound receiver through
red and white cables.
From Audio Out on the TV
The TV is a Toshiba 37HL57
I tried installing new Realtek and ATI drivers, but I still couldn't get the surround working.
I installed these:-
ftp://webuser:WN4Ic2i@218.210.127.133/pc/audio/HDMI_R229.exe
ftp://WebUser:DAx7h9V@66.104.77.130/pc/audio/Vista_Win7_R229.exe
https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/9-7_beta_win7_64_dd_CC.exe
But working I mean, I go to control panel then sound and for HDMI is only lets me select stereo.
After some research I figured maybe its because the HDMI goes to the TV and the TV itself only has two speakers.
Still there must be a way to do this.
I can't do HDMI to the surround receiver as its a bit old
But, its seems to be surround when playing movies through VLC...
But I tried this surround test.
http://www.halfgaar.net/media/chan-id.zip
and you could defintiely tell there was "audio coming from different corners". But, when the test announced which speaker the sound should be coming out, it wasn't always accurate.
My HDMI connection from my old laptops works but my new x64 does not want to work. I do see the chanel open on the tv when I plug in but dont see video or hear sound.Just a blank screen. Under sound setting, the HDMI option is there but It wont allow me to set it as the default
View 4 Replies View RelatedMy laptop wont connect to my tv via hdmi.
View 1 Replies View RelatedMy old laptop connected just fine but my new one doesnt. New laptop has TWO graphics card (intel for 2D and nvidia for more taxing stuff) and am wondering whether thats the issue? I connect my laptop to TV via HDMI but when I hit F1 (to change display output to a projector) the laptop screen changes (As though it has connected to the TV) but the TV isnt showing anything.
View 7 Replies View RelatedI have to restart my Lenovo z570 laptop everytime I need to connect through HDMI to my LG 37 inch TV, and the other problem is if after connection i happen to switch between inputs on my LCD and switch back to HDMI, the connection is lost. (I have gone tru all the necessary HDMI setups and everything seems fine)
View 1 Replies View RelatedI have ASUS UL80V and I am trying to connect it to LCD using HDMI
View 1 Replies View RelatedI want to watch my laptop on the tv. iv pluged in the cable the screen comes on the tv but only small. iv tried to change the resolution and download a tv tunner but they arnt workking.
View 1 Replies View RelatedI am searching for HDMI output player for 1920X1080 resolution for my laptop to my 3D Sony bravia..
View 1 Replies View Related
