I am having an issue with my Aurora R4 computer. I am trying to play a game using my monitor, but also to have it show on my HD TV. I have the monitor hooked with a DVI connection and out from the same card to the HDMI in the TV.
View 14 RepliesAre there any tricks to running games well on a three monitor setup?
I only have 2 x16 slots running dual evga 275 gtx oc on a tyan s2915 motherboard with 16 gb ram, dual quad core 2356s,raid x-25m ssds and three 24 in monitors under windows 7U 64. This is loads better than vista 64 (I can't even talk about it) but it still chokes when the action gets heavy. Obviously this computer is used for manuscript creation-writing model analysis by day but I like to have a little fun at night. Hence I would like to tweak what I can without going to two monitors (can't stand the line in the middle) or going to a new MB.
I just bought a new 23inch Samsung Monitor (S23B370). It have full HD support and also have an HDMI port. I bought a HDMI cable which have HDMI on both ends. I have a VGA (Nvidia 210) which also have an HDMI port. I connected the monitor's HDMI out to the VGA's HDMI port with the new cable and booted. Nothing came. I even set the Monitor's settings to HDMI. But nothing happened. It says check display cable. Why is this? How to fix it? Have I done something wrong?
View 1 Replies View RelatedI bought a Samsung HDMI monitor yesterday (model: S22B370H) for my Z68P-DS3 motherboard which has only an HDMI output. The monitor was working fine when connected to my laptop, although with some flickering. When I connect to the PC, rarely it shows a display till the Windows Startup booting screen, after which it is totally blank. The monitor is recognizing and HDMi input but is not displaying it.
View 1 Replies View RelatedI added speakers to my computer and now I have this message on my monitor "HDMI NO SIGNAL" Everything seems to be working etc. I can get on the Interenet, play viedeos, email and all software is useable. How do I get that message off of my monitor?
View 1 Replies View RelatedGraphics card(SAPPHIRE 7950 3GB with Boost) does not indicate any error, it never gets above 50C, there are no artifacts, and it runs smooth as butter when it works(Hitman Absolution and Shogun total war 2).CPU doesn't overheat either, my NH-D14 keeps it(3930k) cool at below 50C at all times.
Fixes already tried:
Changing SATA cable on SSD
Reseating GPU/Power connections
reinstalling drivers/installing new drivers
updating BIOS
underclocking GPU.
There are no bluescreens, error codes, or anything of that sort, it freezes the frame and a loud buzzing comes from the monitor.Games are all installed on the SSD(Intel 520 Cherryville 180GB)Games ran through Steam new build, used less than 5 hours, max.After turning off the computer for a period of time, it'll let me play for 20-ish minutes, but then trying to reboot and play again results in near instant crash(2-5 minutes of play).
I've noticed this anomaly now on two of my Windows 7 rigs, one each Ultimate and Home Premium; Monitors that attach via HDMI are not getting the 'power off' message from the OS. The same monitors hooked up by other means [dvi, vga] do power off just as they should per the power plan settings.
View 2 Replies View RelatedMy new graphics card has a HDMI port and I was wondering if there is any advantage of using that port to connect my graphics card to my monitor over the normal DVI port?
View 9 Replies View RelatedI have a Lenovo H405-7223-1GU that I bought in June 2011. Yesterday I bought a Philips 32" HDTV 720p 60Hz. My PC won't recognize my TV at a monitor via HDMI cable. The ports on the TV and the cable is fine because I can connect my DVD player with no issues. Most help is saying to right click desktop, click "screen resolution"and then just tell the PC it's ok to send info over HDMI. That would be fine but I can't have my monitor and HDMI plugged in at the same time. As soon as the HDMI is plugged in my monitor (VGA) goes blank then comes back on with only the background image showing. No start button, no icons, no toolbar
View 1 Replies View RelatedI connected my computer to my monitor via hdmi but there is no sound coming from my monitor. i updated all drivers and even tryed to connect the monitor to a reciever from the head phone jacks. i get sound from my computer to the reciever that way byt not thru the monitor. monitor is e2370 lg and my graphics card is ATI Radeon HD 5450.
View 9 Replies View RelatedDo I need any special to set up three monitors for gaming in Win7?
View 2 Replies View RelatedI wanted a break from the HDMI sound through the monitor to use headphones, and after several other methods, I tried disabling the HDMI sound. That worked great, but now that option for playback device is completely gone! How do I get it back so I can use the (admittedly weak, but still functional) monitor sound?
View 3 Replies View RelatedI've just built a new computer with Windows 7 and a gigabyte brand radeon HD4890 and have been having the same issue as some other users with regard to the over/underscan.
I managed to correct the inch or so of unfilled space when displaying the desktop by using the under/overscan utility in CCC (thanks to info on this forum ^_^) but found that the problem still exists when I ran my first full-screen applications.
I installed, updated, and ran Spore: Galactic Adventures to take a look at how my system was going to handle everything, but found that the dreaded inch was back. The really odd thing was that when I switched Spore to windowed mode, the inch had gone and I could maximise to full-screen. Of course, the window header and taskbar kind of detract from the game, but this isn't necessarily an issue for Spore (which can hardly be described as immersive).
I am, however, concerned that this issue may pop up in other games where the window header and taskbar will detract from the game (if it operates well in windowed mode at all).
I plan on investigating further later today, possibly in the direction of motherboard and chipset drivers, but also testing with other games.
I have a Toshiba L755 Laptop with Intel Graphics and Media Control Panel. I hooked up the laptop via HDMI cable to a TV monitor. It worked great, but afterwards the screen will not fill up. I can't adjust the overscan and am stuck.
View 1 Replies View RelatedMy 6970 xfx works great except when I connect the hdmi to my receiver. The monitor just shuts down. Is there a procedure I need to do to prevent it? When I disconnect the hdmi the monitor turns on...
View 4 Replies View RelatedIm interested in setting up a multi monitor setup.My main monitor will be for gaming, and the other will be for web browsing/server admin clients. Could i run one monitor off my GPU and the other off my Core i5's integrated GPU via the built in HDMI connector? or would this cause a confusion with windows? the reason i ask is because i cant see my ATI 6950 handeling both BF3 and another monitor,
View 1 Replies View Relatedi tried to connect my TV to my laptop through the HDMI port.
but under the screen resolution there is only my main screen.
when I plug my HMDI cable into my TV from my PC I lose my PV monitor signal
View 1 Replies View RelatedMy old monitor has problems turning on, I can leave it on for 30hrs before it decides to display a picture, or I can manipulate it by unplugging the DVI cable from the back, but sometimes even that takes a few tries. It's off warranty and for reference it's a Samsung SyncMaster 226BW.So I bought a new monitor and I have it plugged in using HDMI, but a problem I get is that when both monitors are plugged in the HDMI has no display until it gets to Windows, so I cannot see the boot process of my PC, because my old monitor as explained above has problems turning on. Was a hindrance today when I was tinkering with my SSD and had to go to BIOS, and frankly I'd like to be able to see in case anything goes wrong, like a BSOD or Windows update etc.
View 5 Replies View Relatedive got a problem with my new viewsonic vx2753mh-led monitor. its got 2x hdmi inputs and one vga.the vga works straight off the bat, but whenever I try and plug the hdmi in it just says no input signal detected and goes black I noticed in device manager that this was installed as 'generic non-pnp monitor' so after jumping through some hoops i managed to install the driver as 'viewsonic vx2753 SERIES' anyway this doesnt seem to have made a difference. still no input through the hdmi.I have tested to cord on my samsung tv and it worked fine so it can't be a problem with the cord or the graphics card....just some general info that might be of use:
windows 7 x64
dual monitor setup
the graphics is integrated on the intel i5 chip my display adapters in device manager says Intel(R) HD Graphics Family.it has a dvi out, hdmi out, and vga out.
I've recently purchased a Samsung T23A750 monitor and to my disappointment when I try to watch a movie the built in speakers are not functioning. I have a Sony Vaio Z216GX connected via HDMI to the monitor (HDMI-DVI) port. I can definitely see the video, but no audio is playing from the speakers. The built in speakers are not at fault- I did a self-diagnosis of the monitor and the speakers seem to work fine. I also set the monitor as the default for the audio and even when Win 7 says its functioning properly, the speakers still don't work. Conversely, setting the default to my PC speakers work fine. I'm sure its not the HDMI cable- I used the same one to hook my pc to my tv with everything working fine.
View 4 Replies View RelatedI have connected my hdmi cable as usual but this time i had on tv display NO SIGNAL. When i connect another pc to check the cable it seems to work correctly.The problem is coming from my pc.
View 5 Replies View RelatedI'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.
I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.
So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.
I would like to connect my laptop to the television both have HDMI connections will a hdmi lead work
View 1 Replies View Relatedhow can i get sound from my computer to my tv
View 1 Replies View Relatedhe has a Dell Inspiron laptop Window 7 and a Samsung LED TV. I'm on port HDMI2 on the TV from the PC. I have tried everything but it says "source is not connected..." I tested the cable with the blue ray player and it works fine. I called Dell (still under warranty) an they were useless.I've checked the settings on the PC and I have it set to "extended" so I can see the monitor on both....no luck. Is it a setting on the TV that I am missing?
View 1 Replies View RelatedI have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies View Related