he has a Dell Inspiron laptop Window 7 and a Samsung LED TV. I'm on port HDMI2 on the TV from the PC. I have tried everything but it says "source is not connected..." I tested the cable with the blue ray player and it works fine. I called Dell (still under warranty) an they were useless.I've checked the settings on the PC and I have it set to "extended" so I can see the monitor on both....no luck. Is it a setting on the TV that I am missing?
I have connected my hdmi cable as usual but this time i had on tv display NO SIGNAL. When i connect another pc to check the cable it seems to work correctly.The problem is coming from my pc.
I'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.
I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.
So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.
I use my tosh laptop for looking at netflix on my two TV.One is a LG other is a Sammy. Since I have had the laptop about 4 to 6 weeks it has (HDMI out) worked on both tvs no problem! The last week The LG just will not recognise the signal Like the Samsung works ok no probs there... The LG do no matter what HDMI port I use nada (No signal is what it says) there are 4 HDMI ports and none are working, I have tried about 5 different HDMI cables and still nothing?
I just bought a new 23inch Samsung Monitor (S23B370). It have full HD support and also have an HDMI port. I bought a HDMI cable which have HDMI on both ends. I have a VGA (Nvidia 210) which also have an HDMI port. I connected the monitor's HDMI out to the VGA's HDMI port with the new cable and booted. Nothing came. I even set the Monitor's settings to HDMI. But nothing happened. It says check display cable. Why is this? How to fix it? Have I done something wrong?
So I bought this kind of HDMI cabel I have a HDMI port on the backside of my case and my motherboard should support it.So one end going into the HDMI port on the case and the other one goes into the TV, but my computer is not recognizing it.I'm trying to dual screen, I have a normal PC monitor which is working fine, however the HDMI for the monitor looks like this and works just fine, what could the error be?
I am having issues with a brand new system which has an Intel mainbord. I am trying to connect the system to a Denon AVR1912 unit. Windows tells me that the Denon amp is attached to the HDMI socket (the Denon AVR1912 name is displayed on the icon) but then contradicts itself by saying that it is unplugged. I did discover at one stage that the HDMI icon in the "Sounds" section of Control Panel disappeared. I then had to reload the driver and thought that might fix the problem at the same time, but no such luck. I have checked to make sure that the HDMI socket is enabled in BIOS and that was OK.
This HP upgrade from Vista to Windows 7. I have video but no sound at all. I went to intel's website and downloaded the intel graphic drivers. But the sound drivers say un-recognized. In my device manager I see IDT High Definition Audio CODEC and Inter(R) High Definition Audio HDMI. My HP model is dv4-1465dx
I bought a Samsung HDMI monitor yesterday (model: S22B370H) for my Z68P-DS3 motherboard which has only an HDMI output. The monitor was working fine when connected to my laptop, although with some flickering. When I connect to the PC, rarely it shows a display till the Windows Startup booting screen, after which it is totally blank. The monitor is recognizing and HDMi input but is not displaying it.
My HDMI connection from my old laptops works but my new x64 does not want to work. I do see the chanel open on the tv when I plug in but dont see video or hear sound.Just a blank screen. Under sound setting, the HDMI option is there but It wont allow me to set it as the default
I have my Iiyama prolite connected via dvi and another TV via HDMI.As soon as the HDMI is plugged in I lose the DVI display and it transfers to the HDMI. The DVI is no longer detected.Does this mean if I want a second monitor I will have to set it up through VGA?
Recently I upgraded my vista to Windows 7 and tried connecting it to my HD TV through the HDMI but the screen on my laptop goes blank (black) and no reception on the TV as well. Have an ATI Radeon 4500 Series adapter and HDMI used to work perfectly in Vista.
when i connect acer laptop to tv using HDMI, I get no sound but the picture is fine. On the sound options I only see the Speakers and Digital Output options but dont see any HDMI Audio output. This used to be visible earlier (and the sound used o work) but this option suddenly vanished.
I have Acer Iconia W500. It is wokring great in all situation except one. It has one HDMI output. I can connect it to my 24" LCD tv with HDMI cable and works perfect (I can switch between single desktop, clone, extend etc). When I connect to my LG 42" LCD tv using HDMI, the screen goes blank and tv says no signal. When I connect to the TV and start the tablet, I can see starting Windows on both screens. Seems once Windows is loaded, I get no signal on the TV from the tablet. It did work the first time and I was messing with the display setting and I think I accidently turned off backlight on the tablet.I use logmein.com to remote into my other machines. I tried using logmein to connect to this, it works when the tablet is not connected to this TV, but once it it connected to the tv, I only see a blank screen. I also tried UltraVCN, I get same thing, blank screen.I need to know if there is any way I can either delete the LG tv profile or something where when I connect the HDMI cable, it will revert back to default setting and the video will show on both tablet and tv like it does when I connect the other TV.Sorry about long thread, but wanted to make sure I enter all the details of my problem. Below are the system details. 10.1 HD Multi-Touch LED-backlit TFT LCD Display: (1280 x 800) resolution, wide viewing angle AMD Dual-Core Processor C-50 2GB DDR3 Dual-Channel Memory Windows 7 Home Premium 32-bit ATI Radeon HD 6250 Graphics 32GB Solid State Drive 802.11b/g/n Wi-Fi CERTIFIED Bluetooth 3.0+HS Dolby Advanced Audio v2 Audio Enhancement High-Definition Audio Support 2- USB 2.0 Port 1- HDMI Port with HDCP Support
I bought new computer about 6 month ago. Hdmi worked fine with my tv and I don't know whats wrong now. I know its not the cable because I bought another one and the tv is certainly not because it has 2 hdmi. The computer as I said is almost new so a would be very happy if I wouldn't have to give it repairing.
Up until the other day, I've been using my MSI Wind u230 netbook / Radeon HD 3200 to output to my monitor (Acer S243HL - only has 1x DVI and 2x HDMI inputs) and then occasionally swap to a Westinghouse 32" TV.The other day: I was using my monitor then swapped to the tv, and then returned to my room to connect to the monitor and it just won't work. (To note, I've been using Win key + P to set projector only and to disconnect projector before unplugging the HDMI cable.)The netbook screen will turn itself off (as if it detects the HDMI-out) but the screen or TV will just show "No signal."I tried a shorter HDMI cable, tried the other input on the monitor, still nothing. Strangely enough, checking the displays in Catalyst or the Screen Resolution properties, it can detect both the TV and the monitor. There's just no signal coming out.Even stranger: trying to connect another laptop to the monitor (which used to work) displays "No signal" too.
I built a barebone kit and installed Windows 7 Ultimate 64bit, I installed all the drivers correctly but for some reason Windows keeps detecting the front audio jack as if someone is repeatedly pushing in and out headphones(no pun intended). Audio doesn't work at all through front and back audio jacks, only HDMI. I only get static from the audio jacks.
I've recently purchased a Samsung T23A750 monitor and to my disappointment when I try to watch a movie the built in speakers are not functioning. I have a Sony Vaio Z216GX connected via HDMI to the monitor (HDMI-DVI) port. I can definitely see the video, but no audio is playing from the speakers. The built in speakers are not at fault- I did a self-diagnosis of the monitor and the speakers seem to work fine. I also set the monitor as the default for the audio and even when Win 7 says its functioning properly, the speakers still don't work. Conversely, setting the default to my PC speakers work fine. I'm sure its not the HDMI cable- I used the same one to hook my pc to my tv with everything working fine.
my blue ray only has one video out option -- (HDMI). My T.V. has 2 HDMI ports currently in use, and 1 unoccupied VGA (15-pin) connector port. What are my option(s) to connect if I want to use the VGA (15-pin). How do I know if the T.V. (3 year old 42" Sylvania) will accept using this port from the HDMI on my blue ray?
I am using a Laptop with a dead screen by running an external monitor from vga port. I am trying to duplicate this monitor on Sony HD tv using an USB adapter to HDMI. On the first go around I got my desktop ...minus any task bars or icons. on the Sony plus sound but could not get the complete desktop to display. (I am thinking now this might have been resolution trouble and my icons were just out sight) Videos play fine on vga monitor but see just windows logo on Sony.
When I go to display settings I see "1/2 multimonitors" and it shows the Sony as 3. That is when I get lost. If I click on identify it shows a giant " 1" and "2" on my vga monitor. at the same time. Then my choices are duplicate, extend, and show desktop. Which should I use.? I am not sure if my vga monitor is 1 or 2.
There is also a "connect to projector". I messed around there and killed the vga monitor (my only one) Had to restore in safe mode to get back to normal vga output.
Last night my new laptop arrived (XPS), still getting used to windows 7 etc... but i thought i would watch something through my t.v. Plugged HDMI cable in back of laptop straight in to t.v, changed the source and straight away i had a lovely sharpe picture of my deskop instantly.... or so i thought
im getting the middle part of my screen fine - but it is cropped so i cant see the tool bar (its too low) and the desktop icons are only veiwable if i move them closer in screen! Ideally i want to have identical screens on both so i can use both at sam time, but currently i can only view either or atm? and the t.v one being crop means i can use it as a computer (No toolbar etc..)
I could figure this out on XP but windows 7 seems beyond me atm!
I can`t get surround sound over the HDMI. I have tried old drivers, and forworth to the newest. Nothing gives me surround. I have a Yamahasurround reciver that gives me the sound. And it works anything else I have tried on it. Inside windows, if I trie to go to sound options, goes to configuration on the HDMI inside sound opt. I can`t get anything else than stereo.
I recently purchased a Dell n5010 and i cant seem to connect it onto my 40" Bravia HD LCD.i'm trying to connect it via HDMI.. but somehow the laptop doesn't seem to display on my Bravia.At first i thought it was the cable issue, but the HDMI cable works perfectly fine on the DVD player.
Look worse than the VGA out on my laptop? The HDMI out has black bars on the left, right, bottom and top. The VGA looks crisp and clear and fills the whole screen on my TV.
When I connect my PC to my TV Via HDMI Cable, my TV does not receive a signal. When I check in Control panel>Display>Resolution, My TV hasn't even been detected. My TV is an LG 50", Card is a GTX580, and my OS is Windows 7.
Also, when I connect my laptop to my TV via HDMI (Also on Windows 7), It is instantly recognised and automatically displays, so it has to be an issue with the PC itself.
I am trying to get audio from my PC via HDMI into my Marantz NR1402 AV Amp and then into my panasonic plasma.the plasma is picking up the desktop (so the signal is going thru the amp ok but the amp is not receiving any sound. In the Nvidea Control panel Set up Digital Audio it recognises The marantz under HDMI but in the configure section "open windows sound setting" it only shows speakers (not plugged in) & Digital Audio (S/pdif) Default device (i am showing hidden & disconnected devices).I have opened the pc case and noticed that I have a two pin cable from the 9500gt going to the Spdif on motherboard & a cable running from the soundcard to the front sockets on the pc case.
Right i picked up a pc that needed some tlc, tried installing windows 8 and get the error so installed windows 7.Quick breakdown:motherboard - k7s41cpu - amd seprom 2400+graphics card - powercolor x1950 pro agp 256mbHad a few problems installing the video card - but after going into bios and changing agp to 4x instead of 8x it now works great - full hd display using a dvi - hdmi 1.4v leadNow my problem is I cant get any sound, having read and read i now know there is sound output through DVI (19 pins video / 5 pins sound)My question is how do i enable the sound through my x1950 proI have tried installing the realtek hd audio drivers but it just comes back no driver installed.
