HDMI-out Stopped Working, Windows 7 X64, Radeon HD 3200
Apr 26, 2012
Up until the other day, I've been using my MSI Wind u230 netbook / Radeon HD 3200 to output to my monitor (Acer S243HL - only has 1x DVI and 2x HDMI inputs) and then occasionally swap to a Westinghouse 32" TV.The other day: I was using my monitor then swapped to the tv, and then returned to my room to connect to the monitor and it just won't work. (To note, I've been using Win key + P to set projector only and to disconnect projector before unplugging the HDMI cable.)The netbook screen will turn itself off (as if it detects the HDMI-out) but the screen or TV will just show "No signal."I tried a shorter HDMI cable, tried the other input on the monitor, still nothing. Strangely enough, checking the displays in Catalyst or the Screen Resolution properties, it can detect both the TV and the monitor. There's just no signal coming out.Even stranger: trying to connect another laptop to the monitor (which used to work) displays "No signal" too.
suddenly the grey lines engulfed 2-3rd of the screen of my laptop.. I had replaced replaced window vista with window 7 .Now i dnt know how to cope up this problem.
this happened 3 or 4 times on me while using internet explorer (i know that thats a bad browser) and watching Internet videos. i switched to google chrome and have had no problems until i was watching a Internet video and it happened again.
Recently my computer has been force closing applications like Photoshop and Windows Explorer. It usually happens when I right click in Explorer or try to open anything in Photoshop. When it happens, a dialogue box comes up that says "Windows Explorer has stopped working" or "Adobe Photoshop has stopped working" Under the details it displays this information:
Problem signature: Problem Event Name:APPCRASH Application Name:Explorer.EXE Application Version:6.1.7600.16768 Application Timestamp:4d688122
he has a Dell Inspiron laptop Window 7 and a Samsung LED TV. I'm on port HDMI2 on the TV from the PC. I have tried everything but it says "source is not connected..." I tested the cable with the blue ray player and it works fine. I called Dell (still under warranty) an they were useless.I've checked the settings on the PC and I have it set to "extended" so I can see the monitor on both....no luck. Is it a setting on the TV that I am missing?
I use my tosh laptop for looking at netflix on my two TV.One is a LG other is a Sammy. Since I have had the laptop about 4 to 6 weeks it has (HDMI out) worked on both tvs no problem! The last week The LG just will not recognise the signal Like the Samsung works ok no probs there... The LG do no matter what HDMI port I use nada (No signal is what it says) there are 4 HDMI ports and none are working, I have tried about 5 different HDMI cables and still nothing?
I just bought a new 23inch Samsung Monitor (S23B370). It have full HD support and also have an HDMI port. I bought a HDMI cable which have HDMI on both ends. I have a VGA (Nvidia 210) which also have an HDMI port. I connected the monitor's HDMI out to the VGA's HDMI port with the new cable and booted. Nothing came. I even set the Monitor's settings to HDMI. But nothing happened. It says check display cable. Why is this? How to fix it? Have I done something wrong?
So I bought this kind of HDMI cabel I have a HDMI port on the backside of my case and my motherboard should support it.So one end going into the HDMI port on the case and the other one goes into the TV, but my computer is not recognizing it.I'm trying to dual screen, I have a normal PC monitor which is working fine, however the HDMI for the monitor looks like this and works just fine, what could the error be?
I am having issues with a brand new system which has an Intel mainbord. I am trying to connect the system to a Denon AVR1912 unit. Windows tells me that the Denon amp is attached to the HDMI socket (the Denon AVR1912 name is displayed on the icon) but then contradicts itself by saying that it is unplugged. I did discover at one stage that the HDMI icon in the "Sounds" section of Control Panel disappeared. I then had to reload the driver and thought that might fix the problem at the same time, but no such luck. I have checked to make sure that the HDMI socket is enabled in BIOS and that was OK.
This HP upgrade from Vista to Windows 7. I have video but no sound at all. I went to intel's website and downloaded the intel graphic drivers. But the sound drivers say un-recognized. In my device manager I see IDT High Definition Audio CODEC and Inter(R) High Definition Audio HDMI. My HP model is dv4-1465dx
I bought a Samsung HDMI monitor yesterday (model: S22B370H) for my Z68P-DS3 motherboard which has only an HDMI output. The monitor was working fine when connected to my laptop, although with some flickering. When I connect to the PC, rarely it shows a display till the Windows Startup booting screen, after which it is totally blank. The monitor is recognizing and HDMi input but is not displaying it.
My HDMI connection from my old laptops works but my new x64 does not want to work. I do see the chanel open on the tv when I plug in but dont see video or hear sound.Just a blank screen. Under sound setting, the HDMI option is there but It wont allow me to set it as the default
I have my Iiyama prolite connected via dvi and another TV via HDMI.As soon as the HDMI is plugged in I lose the DVI display and it transfers to the HDMI. The DVI is no longer detected.Does this mean if I want a second monitor I will have to set it up through VGA?
Recently I upgraded my vista to Windows 7 and tried connecting it to my HD TV through the HDMI but the screen on my laptop goes blank (black) and no reception on the TV as well. Have an ATI Radeon 4500 Series adapter and HDMI used to work perfectly in Vista.
when i connect acer laptop to tv using HDMI, I get no sound but the picture is fine. On the sound options I only see the Speakers and Digital Output options but dont see any HDMI Audio output. This used to be visible earlier (and the sound used o work) but this option suddenly vanished.
A few teething problems with Windows 7... I recently purchased an Acer Aspire 7535G with Vista - it has two graphics cores - an on-board 3200HD for low power stuff and a more powerful HD 4570. These are controlled by Catalyst Control Center (CCC) and worked fine...
...until I upgraded to Windows 7
- Now Power Express does not seem to recognize either cards although the 3200 appears to be working. When I check the hardware section of the computer, both cards are recognized, but a fault is diagnosed with the 4500 series card - it says the card cannot start - code 10 error
The cards are supposed to switch automatically when the computer is plugged into / out of mains power.
I have downloaded the most recent versions of CCC and the most recent ATI drivers but this has not rectified the problem.
I need the 4570 card. Has anyone experienced similar / suggest a solution??
As i read on forums my problem is quite common. Cod 2 and Cod 4 when i start multiplayer it crashes and gives me cod 2 stopped working error. My sound card is "High Definition Sound Device" i can't find stereo mix on my pc and i tried plugging a mic in pc and still the games crash. Single player works fine.
I can use a usb pendrive, or a memory card reader in my usb.But both of my protable usb hard drives are not showing when plugged in.I have tried a usb 'Y' cable.but no good.Both drives work on my netbook..But not on my windows 7 pc.
I have Acer Iconia W500. It is wokring great in all situation except one. It has one HDMI output. I can connect it to my 24" LCD tv with HDMI cable and works perfect (I can switch between single desktop, clone, extend etc). When I connect to my LG 42" LCD tv using HDMI, the screen goes blank and tv says no signal. When I connect to the TV and start the tablet, I can see starting Windows on both screens. Seems once Windows is loaded, I get no signal on the TV from the tablet. It did work the first time and I was messing with the display setting and I think I accidently turned off backlight on the tablet.I use logmein.com to remote into my other machines. I tried using logmein to connect to this, it works when the tablet is not connected to this TV, but once it it connected to the tv, I only see a blank screen. I also tried UltraVCN, I get same thing, blank screen.I need to know if there is any way I can either delete the LG tv profile or something where when I connect the HDMI cable, it will revert back to default setting and the video will show on both tablet and tv like it does when I connect the other TV.Sorry about long thread, but wanted to make sure I enter all the details of my problem. Below are the system details. 10.1 HD Multi-Touch LED-backlit TFT LCD Display: (1280 x 800) resolution, wide viewing angle AMD Dual-Core Processor C-50 2GB DDR3 Dual-Channel Memory Windows 7 Home Premium 32-bit ATI Radeon HD 6250 Graphics 32GB Solid State Drive 802.11b/g/n Wi-Fi CERTIFIED Bluetooth 3.0+HS Dolby Advanced Audio v2 Audio Enhancement High-Definition Audio Support 2- USB 2.0 Port 1- HDMI Port with HDCP Support
I bought new computer about 6 month ago. Hdmi worked fine with my tv and I don't know whats wrong now. I know its not the cable because I bought another one and the tv is certainly not because it has 2 hdmi. The computer as I said is almost new so a would be very happy if I wouldn't have to give it repairing.
I installed the graphics card but it needs 6 pin PCI-E auxiliary power connector, my power supply is DELL J102N PS-5361-2 360 Watt Power Supply XPS 435MT and it doesn't have this 6 pins, when i start my computer it's just giving me 6 beeps which means Video card failure. What should i do?
I bought two new SyncMaster SA100 monitors that for some reason only have VGA ports on them. No problem right? The HD 6570 has a VGA and DVI output so I put a DVI to VGA converter on it. After countless hours of messing around in all the video control panel i can not get the second screen (thats using the converter) to show anything! It isn't even being detected, anyone know if this because the card just isn't able to run the converter?
I have a IBM Thinkpad T30 with a graphics card ATI Mobility Radeon 7500. I have an external monitor plugged up. On xp I can dual split easily! I just installed windows 7, and it doesn't detect the external monitor. I right click desktop, and select screen resolution. I click detect and the only screen detected is my laptop screen (not the vga external screen). I checked the IBM website, and the video drivers are only for windows xp. I tried to install the driver for xp on windows 7, and an error pops up and says "Setup was unable to complete the installation. Try to setup your display adapter with a standard VGA driver before running setup"
i just received my i7 920 computer today and i got the radeon 5770 1 gb graphic card after installing windows 7 ultimate i tried to set up the dual monitor and under display it only recongizes 1 monitor while the 2nd monitor does what im doing on the first monitor how can i correct this??
I have an ATI Radeon HD 7700. And when I game, sometimes it says that my driver stops working and that they have been restored, and can I reinstall my driver some how?
after unistalling nero 7 dvd rom disapeared , have physicaly uninstalled reset & reinstalled dvd rom still not showing it dose apear in divive manager but as failed driver , wont accept drivers from usb
I get this message a lot lately and today, it's just constant - to the point that I cannot get into my documents and work with them.grapefox grapefox has chosen the best answer to his/her question.Click here to view the answer that was selected.
Having a problem the past 2 days, when going into one particular file on my c drive I am getting windows explorer has stopped working and am prompted to restart or the infamous check for an online solution.I am able to open every other folder on this drive and have no issues, have tried a sfc /scannow but found no errors.