This HP upgrade from Vista to Windows 7. I have video but no sound at all. I went to intel's website and downloaded the intel graphic drivers. But the sound drivers say un-recognized. In my device manager I see IDT High Definition Audio CODEC and Inter(R) High Definition Audio HDMI. My HP model is dv4-1465dx
View 49 Replieswhen i connect acer laptop to tv using HDMI, I get no sound but the picture is fine. On the sound options I only see the Speakers and Digital Output options but dont see any HDMI Audio output. This used to be visible earlier (and the sound used o work) but this option suddenly vanished.
View 2 Replies View RelatedI built a barebone kit and installed Windows 7 Ultimate 64bit, I installed all the drivers correctly but for some reason Windows keeps detecting the front audio jack as if someone is repeatedly pushing in and out headphones(no pun intended). Audio doesn't work at all through front and back audio jacks, only HDMI. I only get static from the audio jacks.
View 2 Replies View Relatedhow can i get sound from my computer to my tv
View 1 Replies View RelatedYesterday I installed a new external hard drive - following the installation - my sound no longer played through my television (video is fine, HDMI connection) and sound now comes ONLY through the laptop speakers.The option for HDMI Audio doesn't appear in the 'sound' menus. I have 'checked' "shoe disabled" and "show disconnected" in those menus. [code] I use my HD TV as my primary monitor for gaming, so having sound through laptop speakers and not TV is quite annoying.Perhaps my only solution is another sound card?
View 6 Replies View RelatedI recently done a new build, not with the same specs I have on here; i5 2500k p8z77-m pro sapphire radeon 6870 I cannot get any sound through the front+back headphone jacks, realtek doesnt detect any audio devices, however i can mess around with the settings to get windows to say i have speakers+mic and 2nd audio devices plugged regardless if anything is plugged in or not.
View 1 Replies View Relatedhe has a Dell Inspiron laptop Window 7 and a Samsung LED TV. I'm on port HDMI2 on the TV from the PC. I have tried everything but it says "source is not connected..." I tested the cable with the blue ray player and it works fine. I called Dell (still under warranty) an they were useless.I've checked the settings on the PC and I have it set to "extended" so I can see the monitor on both....no luck. Is it a setting on the TV that I am missing?
View 1 Replies View RelatedI am running windows seven with an AMD Athlon X2 4850e 2.5GHz card and have a flat panel television setup via hdmi and a stereo receiver/ speakers through the sound card out. I'd like sound to come out of both hdmi and the sound port that way I can here music through the stereo but when I watch standard television programs I can here through the television and turn off the receiver. the only way I've found to control the sound is to set hdmi or sound card to default in the control panel>sound. so switching back and forth is a big pain.
View 0 Replies View RelatedI can`t get surround sound over the HDMI. I have tried old drivers, and forworth to the newest. Nothing gives me surround. I have a Yamahasurround reciver that gives me the sound. And it works anything else I have tried on it. Inside windows, if I trie to go to sound options, goes to configuration on the HDMI inside sound opt. I can`t get anything else than stereo.
View 8 Replies View RelatedRight i picked up a pc that needed some tlc, tried installing windows 8 and get the error so installed windows 7.Quick breakdown:motherboard - k7s41cpu - amd seprom 2400+graphics card - powercolor x1950 pro agp 256mbHad a few problems installing the video card - but after going into bios and changing agp to 4x instead of 8x it now works great - full hd display using a dvi - hdmi 1.4v leadNow my problem is I cant get any sound, having read and read i now know there is sound output through DVI (19 pins video / 5 pins sound)My question is how do i enable the sound through my x1950 proI have tried installing the realtek hd audio drivers but it just comes back no driver installed.
View 9 Replies View RelatedMy motherboard has two seperate sound capabilities. The normal sound outputs [Jacks in the back, headphone jack in the front] and sound over the HDMI.I use our 37 inch flatscreen as my second screen, and if I put a Blue Ray in, the software asks me if I want to use the regular sound, or the HDMI [and the sound comes out my TV]
View 3 Replies View RelatedI have a HP Compaq 2230s laptop and it has a HDMI port. I use a High-Speed HDMI cable to connect it to my LG 3D Smart TV. I finds the video but it does not get the audio (partially). Once I connected, I tested for sound using the volume mixer and the "ding" is played on my TV. But when I try to play a song from my laptop, it is coming from my laptop speakers!
View 1 Replies View RelatedJust bought a new Nvidia GeForce 8400 GS graphics card to replace my dying onboard video.I have a Vizio HDMI TV however I am not getting sound through the HDMI cable. Was under the impression HDMI transmitted video as well as sound.Not sure if the problem is with the TV or with the Video Card?
View 14 Replies View RelatedThe sound was working on my SAMSUNG and I was trying to temporarily disable it, so I would not distrub my housemates.... So I clicked "disable" on the control panel Sounds gaget, thinking this would temporarily turn it off, like it does within the Networks gaget (I turn off wireless at work, and network port at home).
Well it did not temporarily disable it, it deleted it from the system. I have managed to get it to see the HDMI TV at 1080p resolution, but sounds
don't work on the TV since I clicked disable.
I have tried every setting on the control panel, such as sound devices, graphics, displays, tried the "find a device" all to no avail. How do I enable the sound for the samsung?
i got a ATI radeon HD 5570 graphics card with HDMI out the video works ok but no sound to tv even if i make default in controll panel sound, i also have a terra tec aureon 5.1 pci sound card installed plus on board sound i think pq5 pro mobo just downloaded new drivers that i could find still not work.
View 7 Replies View Relatedhow do i get sound from HDMI cable to TV
View 6 Replies View RelatedWhen I connect my laptop to TV through HDMI cable, I get both video and audio from it to play on TV. And if I connect speakers to the headphones output I can't hear sound in speakers, the HDMI audio is still playing on TV. Is it possible somehow to disable the audio on HDMI so only the video will pass? Or maybe to make the sound from headphones output to play audio as well?
View 4 Replies View Relatedbut there is on thing tht i want to add is tht i hav tried going into playback devices but for some reason it says nothing bout the hdmi. It just says "speakers" and "realtek digital output".
Attached Files
Untitled.png 257.82K 8 downloads
I have an Aspire 5738Z laptop running Windows 7 Home Premimum. I am trying to set up a HDMI cable connection to my Toshiba Smart TV. The picture is fine but there's no sound. When I go into Sound in the Control Panel, there is no HDMI option to choose in order to send the output to the TV speakers (only "Speakers" and "S/Digital Audio S/PDIF) . I've tried downloading various Graphics Media Accelerator Drivers from the ACER, INTEL and REALTEK sites but they all say that they are not validated for my computer.
View 1 Replies View Relatedi am in the process of setting up my audio preferences but i'm confused about various aspects of windows 7 audio settings in the device/sound manager. my computers are part of a recording studio setup, and as such, one of my computers has an maudio 1010lt audio interface card. as my studio is also an entertainment setup, i began to investigate if win 7 has some kind of audio "profile" manager, whereby i might be able to select various "devices" or outputs that would automatically be selected when various applications are started. for instance, when i use my daw(reaper), i would like win 7 to automatically select the maudio card as the in/out as the maudio outputs(8) are connected to a patchbay, and are normalled to be connected to an analog mixer. however, if i am listening to audio on the net, like Internet etc, i would like the mobo onboard stereo(front) outputs to be selected by the os, as they are connected to a pair of standard computer powered speakers, as i do not want the mixer powered on during regular listening. and then there is the movie thing. since my mobo has stereo, 5.1, and 7.1 as well as s/pdif output jacks,(and input), from what i understand, the s/pdif output must be used for sound surround as the onboard realtec chips decode dvd etc to the s/pdif outputs, which i would like to connect to a soundsurround reciever, with 5.1 speaker setup, of which the front speakers are used for standard stereo listening..anyway, as i looked at the device/sound manager screen, i saw an "hdmi" device in the list.(see screenshot). well, i don't have anything in the computer that has an hdmi output. so, i am curious. can anyone tell me what this "hdmi" device is or what it is referring to?
View 6 Replies View RelatedI'm looking to set my PC up to play through my TV (a Panasonic TH42PX60b) via a HDMI cable, however there appears to be no sound! I have tried changing the default devices but it still won't work! Should the HDMI carry the signal or do I need to run a 3.5 jack as well.
View 9 Replies View RelatedI recently did a fresh install of Windows 7 Professional 32-bit, my laptop came new installed with Windows 7 Home Premium. Everything works fine and showed no errors. When I tried to play any sound, nothing works. The equalizer on the speaker shows sound going up and down but still no sound. Nothing is showing being muted, I've checked all the settings many times, etc. I've let windows find the drivers, I've manually tried drivers (Vista_Win7_Win8_R270) nothing works. I have two drivers Realtek High Definition Audio and High Definition Audio Device installed. I've uninstalled and reinstalled trying only one driver, etc. I get no sound through headphones or external speakers. I do get audio to my TV through HDMI however.
View 6 Replies View RelatedI also have no sound coming from my Hdmi out after upgrading to RC 7.
I have a Dell XPS 1330 notebook. Audio is Nvidia HD Audio and IDT HD audio codec, both have latest drivers.
When i open Sound mixer and set HDMI to default device and default com device i see sound coming from source and registring on the volume bar graphs.
It seems to stop right at the cable. My computer (unlike a couple of other posts i saw) does recognize the cable and seems to be doing everything right.. just no sound through my .
Anyone have any ideas? i really don't want to go back to vista.
I connected my computer to my monitor via hdmi but there is no sound coming from my monitor. i updated all drivers and even tryed to connect the monitor to a reciever from the head phone jacks. i get sound from my computer to the reciever that way byt not thru the monitor. monitor is e2370 lg and my graphics card is ATI Radeon HD 5450.
View 9 Replies View RelatedI wanted a break from the HDMI sound through the monitor to use headphones, and after several other methods, I tried disabling the HDMI sound. That worked great, but now that option for playback device is completely gone! How do I get it back so I can use the (admittedly weak, but still functional) monitor sound?
View 3 Replies View RelatedI have a Acer aspire 5536 laptop with ATI Radeon HD 3200 graphics card which i connect to my Pansonic TX-L37G20B LCD Tv via the HDMI output on a regular basis to watch films etc. I have had no problems with the connection since the day i bought the TV and have been happlily using it for the last 2 years.
A couple of days ago i connected the laptop to TV as usual and changed to the correct HDMI channel and got nothing. I disconnecetd the lead and reconnected but still no picture or sound on the TV. I tested the HDMI cable and Tv input by connecting the lead to my XBOX and it worked perfectly.
When i connect the lead to the laptop the screen goes blank for a second and i hear the connection sound as normal however no picture on the TV.
I have checked the display settings and the TV is listed under monitors. I have tried all settings eg extend display, duplicate etc.. and it appears to work correctly but i cannot get a picture or sound on the TV. I did think maybe this problem was due to a recent windows update so i have run a system restore to a previous time when this worked, but no joy. I have also unistalled the old graphics card drivers and installed the new ones from the AMD web site and again nothing.
I am using windows 7 64 bit on my desktop (motherboard ASUS P5E) ASUS - Motherboards- ASUS P5E And I installed VGA SAPPHIRE HD 3870 (ATI RADEON Technology) 512 MB.This VGA has a converter plug from DVI to HDMI.connected a 3 m HDMI cable from a converter to the Samsung TV.I can see a picture on the TV but no sound?
1- download latest driver from AMD website from the link below : AMD Catalyst
2- Follow the instructions here : How to Set Up Audio on an ATI Radeon HD | [URL] No audio from HDTV when playing audio / video from a computer system
3- Digital Audio (HDMI) option was grayed out (not clickable) as can be seen in the snapshot below :[URL]
When I try to connect my TV to my laptop via an HDMI cable the video works but the sound still plays from my laptop. I used to have no problems with the sound, but now it doesn't even show up as an output option. I have tried restarting the laptop with and without the HDMI connected and with the TV both on and off (I saw this suggestion in another post) but that did not work. How do I get HDMI to show up as an output option and get the sound to play through the TV?
View 7 Replies View Related I've got a bit of a problem with my audio with my new installation of Windows 7. Previously I had Vista installed, and had no problems with my Realtek HD audio. Installed Windows 7 everything looked good, then realized my Sony A/V receiver model SA-WCT100 was not outputting my movie collection in surround 5.1 like it use to using Vista.
I figured, that�s cool, probably need to install ac3filter_1_51a, I had to in Vista, and it worked a treat when I enabled SPDIF pass through. I guess I should mention I�m using HDMI all the way through, from my PC to the receiver, from the receiver to the LCD. Well, that didn't fix it, everything still plays in stereo. After scratching my head and clicking here and there, I finally found a little tab in the sound settings of my Realtek HDMI setting called 'Custom'.
I selected it, it said to enable AC3, DTS, etc click this box will require a restart. I said awesome, sounds like just what I need. I clicked, and rebooted. I went into WMC, and setup my audio wizard again, and selected 5.1, and tested, and this time it reported 5.1 on my Sony receiver as before it only showed 2 channels (Stereo). I played some of my DVD rips, and bam my DVD rips were playing surround sound again.
I was like that was easy enough. I went to test my Blu-Ray rips that I had converted to WMV HD using TMPGEnc Xpress 4.0, and the video started to play, and I was like, wheres the damn sound. I noticed on the receiver, it didn't report anything for sound. I had no idea what was going on. My surround sound was finally working for everything, but my WMV HD videos had no sound output. I mean I can't even get stereo or anything out of them now. At least before the WMV played in stereo, now I can't hear anything.
Please someone tell me what could be the problem, I don't know what else to try. I don't want to have to revert back to stereo, and disable the magic box under custom in my sound setting.
I have downloaded the latest Realtek drivers form Realtek, version 2.35 for the ATI HDMI audio, and the Digital Audio. I also have the latest drivers for my integrated Radeon 3200 graphics card. I read that sometimes a high resolution can affect the audio, so I lowered my resolution from 1080p, and that didn't help, which I figured it wouldn't.
I am having a problem with a new Win 7 build and have tried everything I could think of without success; hoping someone has a solution.
Background: I installed the OS with the HDD set to Native IDE, the system automatically loaded a driver that worked with my 50" TV and sound played just fine through the TV speakers. After the fact, I realized I had failed to configure the SATA HDD for RAID AHCI and so changed the HDD setting in the BIOS and reinstalled Windows as a new system build.
It failed due to the lack of a driver, and Windows being ever so "helpful", tried to fix the issue which it could not. After investigation, realized that the correct driver had to be manually loaded from a disc, so I wiped the harddrive clean, cleared the CMOS and started over again.
Problem: The HDD and OS loaded just fine, but Win7 selected a "generic PnP monitor" driver, does not realize the HDMI connection and there is now no sound. Manually changing the setting to a 1920X1080 monitor does not make a difference nor does deleting the existing driver, selecting other model Sony drivers, or reloading the OS.
I have spent hours trying to find a driver for the Sony SXRD (any model) with no luck. I have also tried everything I could think of to return the system to it's initial state hoping that Win 7 might reload and recognize the HMDI connection / provide sound.
Welcome any suggestions you may have. What is so bizarre is that there was an appropriate driver when Win booted for the first time but it is nowhere to be found in the application. (The list of choices does not include anything similar and Realtek HDMI Audio shows that it is "not plugged in".)
Look forward to any suggestions / assistance.
System specs:
Monitor- Sony SXRD KDS-50A3000
AMD X3 720
Mother Board- GA-MA785GPMT-UD2H
Win 7 Professional
DDR3 1333 2X2 10666CL8D G Skill Memory
Hitachi 640 GB HDD
DVD/CD Burner
Corsair 650 PSU
when i connect a rgb cable to my tv and laptop there is no sound
View 1 Replies View Related