No HDMI Option In Sound Playback?
Feb 2, 2013
I have an Aspire 5738Z laptop running Windows 7 Home Premimum. I am trying to set up a HDMI cable connection to my Toshiba Smart TV. The picture is fine but there's no sound. When I go into Sound in the Control Panel, there is no HDMI option to choose in order to send the output to the TV speakers (only "Speakers" and "S/Digital Audio S/PDIF) . I've tried downloading various Graphics Media Accelerator Drivers from the ACER, INTEL and REALTEK sites but they all say that they are not validated for my computer.
View 1 Replies
ADVERTISEMENT
Nov 25, 2011
My acer laptop sound playback option shows only speaker option. how can i get headphone option. Wehn i play music sound comes from speaker evn if headphone attached..
View 1 Replies
View Related
Nov 25, 2011
My acer laptop sound playback option shows only speaker option. how can i getheadphone option. Wehn i play music sound comes from speaker evn if headphone attached..
View 2 Replies
View Related
Oct 31, 2011
how can i get sound from my computer to my tv
View 1 Replies
View Related
Nov 29, 2012
Yesterday I installed a new external hard drive - following the installation - my sound no longer played through my television (video is fine, HDMI connection) and sound now comes ONLY through the laptop speakers.The option for HDMI Audio doesn't appear in the 'sound' menus. I have 'checked' "shoe disabled" and "show disconnected" in those menus. [code] I use my HD TV as my primary monitor for gaming, so having sound through laptop speakers and not TV is quite annoying.Perhaps my only solution is another sound card?
View 6 Replies
View Related
Sep 29, 2012
I recently done a new build, not with the same specs I have on here; i5 2500k p8z77-m pro sapphire radeon 6870 I cannot get any sound through the front+back headphone jacks, realtek doesnt detect any audio devices, however i can mess around with the settings to get windows to say i have speakers+mic and 2nd audio devices plugged regardless if anything is plugged in or not.
View 1 Replies
View Related
Aug 27, 2012
I have a thinkpad x100e netbook and a Conexant CX20582 SmartAudio HD sound card.i just reinstalled windows 7 and it seems the microphone has not worked since i did that. I have adjusted, updated, disabled and enabled the drivers, but i still do not get any sound when playing back recordings or skype test calls i make. the system lets me make the recording, and skype seems to detect the microphone, but nothing plays back.the speakers work without problem.when i try to set up the microphone, the prompt does not identify it. i have tried to connect a microphone as well, but either way, i would like to mostly rely on the built-in mic anyway.also, the microphone does not show up on the volume mixer.
View 3 Replies
View Related
Jun 17, 2009
I upgraded to windows 7, and now my sound drivers and my playback (recording) drivers aren't working.
In Device manager it says I have High Definition Audio Device
And Sigmatel High Definition Audio CODEC
And i'm guessing it's realtek? already downloaded it, it didn't work. and i'm on a gateway 32 bit.
View 9 Replies
View Related
Sep 14, 2011
I have system with multiple Sound playback devices. Most of the time it needs to be on the first entry in the list of devices (HDMI output with me).I'm looking for a way that when I have manually set it to another device in the list, and then shut down the pc that at the next boot it automatically reverts back to the first in the list without manual intervention.
View 2 Replies
View Related
Jun 1, 2009
I have recently begun using Windows 7. Previously I was using Vista Home Premium.
I have a Belkin Bluetooth adapter F8T016 and used to stream music to a bluetooth speaker.
Since installing Windows 7 I cannot stream the music. Initially my Broadcom driver would not connect to the speaker. I therefore installed the Anycom Bluetooth USB2 Vista driver as suggested in this thread:
Belkin F8T016 Mini-USB Bluetooth Dongle
Now my laptop and speaker connect properly (I can see it is connected in the bluetooth property settings and physically through the 'connected' LED on the speaker.
My problem now is that the device will not playback sound. When I try to perform the 'test' in the audio device properties I get the message "Error: Cannot perform test sound".
View 1 Replies
View Related
Nov 30, 2009
- graphic drivers (not in my case, U can always check if it helps in yours)
- high performance power profile (from this forum's tutorials: Power Plan - Select | Power Plan Settings - Change)
- installing different codecs/vid player
- PCI-E x1 bug <- a real pain in the ass, caused most of the problems; I’ll explain how to solve it in a minute
- Comodo Firewall/Internet Security for x64 systems (for some users disabling the Image Execution and unticking Detect Shellcode injections worked) - still a not resolved bug LINK 1 LINK2
- interrupt conflict with other hardware (try to disable in BIOS setup your WiFi adapter / COM port – this helped a couple of people)
Skipping and shuttering sound on all my sources (Audigy (with kx v.3550 drivers) and AD SoundMax integrated with MB) was also caused by the PCI-E bug, which was a real surprise for me, especially in the case of Audigy which is an old PCI card.
View 0 Replies
View Related
Oct 23, 2011
After opening the Sound pane (from right click on the tool bar speaker icon) I clicked on the Set Default button near the bottom. There I clicked Disable (I think that was the term) for the onboard sound card (Conexant). Now the sound card is gone and I can't find how to turn it back on. I'm not very sophisticated but I have checked the usual suspects even downloaded the driver etc.
View 3 Replies
View Related
Oct 24, 2011
After opening the Sound pane (from right click on the tool bar speaker icon) I clicked on the Set Default button near the bottom. There I clicked Disable (I think that was the term) for the onboard sound card (I Conexant). Now the sound card is gone and i can't find how to turn it back on. I'm not very sophisticated but I have checked the usual suspects even downoaded the driver (Conextant) etc.
win 7 on acer 722
View 6 Replies
View Related
Aug 1, 2009
I am running windows seven with an AMD Athlon X2 4850e 2.5GHz card and have a flat panel television setup via hdmi and a stereo receiver/ speakers through the sound card out. I'd like sound to come out of both hdmi and the sound port that way I can here music through the stereo but when I watch standard television programs I can here through the television and turn off the receiver. the only way I've found to control the sound is to set hdmi or sound card to default in the control panel>sound. so switching back and forth is a big pain.
View 0 Replies
View Related
Dec 24, 2011
When I use vlc media player to play mp3 files on slow speed the sound cuts out . It is a toshiba netbook and windows 7 starter operating system. What can be the problem.I really need the slow play to listen to language course
View 1 Replies
View Related
May 11, 2011
I can`t get surround sound over the HDMI. I have tried old drivers, and forworth to the newest. Nothing gives me surround. I have a Yamahasurround reciver that gives me the sound. And it works anything else I have tried on it. Inside windows, if I trie to go to sound options, goes to configuration on the HDMI inside sound opt. I can`t get anything else than stereo.
View 8 Replies
View Related
Dec 1, 2012
Right i picked up a pc that needed some tlc, tried installing windows 8 and get the error so installed windows 7.Quick breakdown:motherboard - k7s41cpu - amd seprom 2400+graphics card - powercolor x1950 pro agp 256mbHad a few problems installing the video card - but after going into bios and changing agp to 4x instead of 8x it now works great - full hd display using a dvi - hdmi 1.4v leadNow my problem is I cant get any sound, having read and read i now know there is sound output through DVI (19 pins video / 5 pins sound)My question is how do i enable the sound through my x1950 proI have tried installing the realtek hd audio drivers but it just comes back no driver installed.
View 9 Replies
View Related
Dec 2, 2012
My motherboard has two seperate sound capabilities. The normal sound outputs [Jacks in the back, headphone jack in the front] and sound over the HDMI.I use our 37 inch flatscreen as my second screen, and if I put a Blue Ray in, the software asks me if I want to use the regular sound, or the HDMI [and the sound comes out my TV]
View 3 Replies
View Related
Dec 29, 2011
I have a HP Compaq 2230s laptop and it has a HDMI port. I use a High-Speed HDMI cable to connect it to my LG 3D Smart TV. I finds the video but it does not get the audio (partially). Once I connected, I tested for sound using the volume mixer and the "ding" is played on my TV. But when I try to play a song from my laptop, it is coming from my laptop speakers!
View 1 Replies
View Related
Jul 20, 2012
Just bought a new Nvidia GeForce 8400 GS graphics card to replace my dying onboard video.I have a Vizio HDMI TV however I am not getting sound through the HDMI cable. Was under the impression HDMI transmitted video as well as sound.Not sure if the problem is with the TV or with the Video Card?
View 14 Replies
View Related
Sep 7, 2009
The sound was working on my SAMSUNG and I was trying to temporarily disable it, so I would not distrub my housemates.... So I clicked "disable" on the control panel Sounds gaget, thinking this would temporarily turn it off, like it does within the Networks gaget (I turn off wireless at work, and network port at home).
Well it did not temporarily disable it, it deleted it from the system. I have managed to get it to see the HDMI TV at 1080p resolution, but sounds
don't work on the TV since I clicked disable.
I have tried every setting on the control panel, such as sound devices, graphics, displays, tried the "find a device" all to no avail. How do I enable the sound for the samsung?
View 4 Replies
View Related
Jan 15, 2013
i got a ATI radeon HD 5570 graphics card with HDMI out the video works ok but no sound to tv even if i make default in controll panel sound, i also have a terra tec aureon 5.1 pci sound card installed plus on board sound i think pq5 pro mobo just downloaded new drivers that i could find still not work.
View 7 Replies
View Related
Jun 8, 2011
This HP upgrade from Vista to Windows 7. I have video but no sound at all. I went to intel's website and downloaded the intel graphic drivers. But the sound drivers say un-recognized. In my device manager I see IDT High Definition Audio CODEC and Inter(R) High Definition Audio HDMI. My HP model is dv4-1465dx
View 49 Replies
View Related
Jan 10, 2012
how do i get sound from HDMI cable to TV
View 6 Replies
View Related
Oct 24, 2011
When I connect my laptop to TV through HDMI cable, I get both video and audio from it to play on TV. And if I connect speakers to the headphones output I can't hear sound in speakers, the HDMI audio is still playing on TV. Is it possible somehow to disable the audio on HDMI so only the video will pass? Or maybe to make the sound from headphones output to play audio as well?
View 4 Replies
View Related
Feb 12, 2012
but there is on thing tht i want to add is tht i hav tried going into playback devices but for some reason it says nothing bout the hdmi. It just says "speakers" and "realtek digital output".
Attached Files
Untitled.png 257.82K 8 downloads
View 14 Replies
View Related
Jan 25, 2012
i am in the process of setting up my audio preferences but i'm confused about various aspects of windows 7 audio settings in the device/sound manager. my computers are part of a recording studio setup, and as such, one of my computers has an maudio 1010lt audio interface card. as my studio is also an entertainment setup, i began to investigate if win 7 has some kind of audio "profile" manager, whereby i might be able to select various "devices" or outputs that would automatically be selected when various applications are started. for instance, when i use my daw(reaper), i would like win 7 to automatically select the maudio card as the in/out as the maudio outputs(8) are connected to a patchbay, and are normalled to be connected to an analog mixer. however, if i am listening to audio on the net, like Internet etc, i would like the mobo onboard stereo(front) outputs to be selected by the os, as they are connected to a pair of standard computer powered speakers, as i do not want the mixer powered on during regular listening. and then there is the movie thing. since my mobo has stereo, 5.1, and 7.1 as well as s/pdif output jacks,(and input), from what i understand, the s/pdif output must be used for sound surround as the onboard realtec chips decode dvd etc to the s/pdif outputs, which i would like to connect to a soundsurround reciever, with 5.1 speaker setup, of which the front speakers are used for standard stereo listening..anyway, as i looked at the device/sound manager screen, i saw an "hdmi" device in the list.(see screenshot). well, i don't have anything in the computer that has an hdmi output. so, i am curious. can anyone tell me what this "hdmi" device is or what it is referring to?
View 6 Replies
View Related
Apr 19, 2012
I'm looking to set my PC up to play through my TV (a Panasonic TH42PX60b) via a HDMI cable, however there appears to be no sound! I have tried changing the default devices but it still won't work! Should the HDMI carry the signal or do I need to run a 3.5 jack as well.
View 9 Replies
View Related
Sep 18, 2012
I recently did a fresh install of Windows 7 Professional 32-bit, my laptop came new installed with Windows 7 Home Premium. Everything works fine and showed no errors. When I tried to play any sound, nothing works. The equalizer on the speaker shows sound going up and down but still no sound. Nothing is showing being muted, I've checked all the settings many times, etc. I've let windows find the drivers, I've manually tried drivers (Vista_Win7_Win8_R270) nothing works. I have two drivers Realtek High Definition Audio and High Definition Audio Device installed. I've uninstalled and reinstalled trying only one driver, etc. I get no sound through headphones or external speakers. I do get audio to my TV through HDMI however.
View 6 Replies
View Related
May 13, 2009
I also have no sound coming from my Hdmi out after upgrading to RC 7.
I have a Dell XPS 1330 notebook. Audio is Nvidia HD Audio and IDT HD audio codec, both have latest drivers.
When i open Sound mixer and set HDMI to default device and default com device i see sound coming from source and registring on the volume bar graphs.
It seems to stop right at the cable. My computer (unlike a couple of other posts i saw) does recognize the cable and seems to be doing everything right.. just no sound through my .
Anyone have any ideas? i really don't want to go back to vista.
View 1 Replies
View Related
Sep 2, 2012
when i connect acer laptop to tv using HDMI, I get no sound but the picture is fine. On the sound options I only see the Speakers and Digital Output options but dont see any HDMI Audio output. This used to be visible earlier (and the sound used o work) but this option suddenly vanished.
View 2 Replies
View Related
