HDMI Socket Is Not Working
Feb 14, 2012
I am having issues with a brand new system which has an Intel mainbord. I am trying to connect the system to a Denon AVR1912 unit. Windows tells me that the Denon amp is attached to the HDMI socket (the Denon AVR1912 name is displayed on the icon) but then contradicts itself by saying that it is unplugged. I did discover at one stage that the HDMI icon in the "Sounds" section of Control Panel disappeared. I then had to reload the driver and thought that might fix the problem at the same time, but no such luck. I have checked to make sure that the HDMI socket is enabled in BIOS and that was OK.
View 1 Replies
ADVERTISEMENT
Jan 16, 2013
Failure to connect to VPN per the error below from the log... "Set socket to non-blocking mode failed: An operation was attempted on something that is not a socket.(errno=10038)"Support at VPN vendor suggests that a Windows repair is needed but have no disk as bought the HDD from a repair facility that lost their lease and cannot be located. Should add that I have had a couple of blue screens lately and have run chkdsk /f and tried to do a system restore but all restore points are gone, even though I had several previously.
View 1 Replies
View Related
Jun 16, 2011
he has a Dell Inspiron laptop Window 7 and a Samsung LED TV. I'm on port HDMI2 on the TV from the PC. I have tried everything but it says "source is not connected..." I tested the cable with the blue ray player and it works fine. I called Dell (still under warranty) an they were useless.I've checked the settings on the PC and I have it set to "extended" so I can see the monitor on both....no luck. Is it a setting on the TV that I am missing?
View 1 Replies
View Related
Apr 29, 2012
I use my tosh laptop for looking at netflix on my two TV.One is a LG other is a Sammy. Since I have had the laptop about 4 to 6 weeks it has (HDMI out) worked on both tvs no problem! The last week The LG just will not recognise the signal Like the Samsung works ok no probs there... The LG do no matter what HDMI port I use nada (No signal is what it says) there are 4 HDMI ports and none are working, I have tried about 5 different HDMI cables and still nothing?
View 1 Replies
View Related
Nov 21, 2012
I just bought a new 23inch Samsung Monitor (S23B370). It have full HD support and also have an HDMI port. I bought a HDMI cable which have HDMI on both ends. I have a VGA (Nvidia 210) which also have an HDMI port. I connected the monitor's HDMI out to the VGA's HDMI port with the new cable and booted. Nothing came. I even set the Monitor's settings to HDMI. But nothing happened. It says check display cable. Why is this? How to fix it? Have I done something wrong?
View 1 Replies
View Related
Jan 15, 2012
So I bought this kind of HDMI cabel I have a HDMI port on the backside of my case and my motherboard should support it.So one end going into the HDMI port on the case and the other one goes into the TV, but my computer is not recognizing it.I'm trying to dual screen, I have a normal PC monitor which is working fine, however the HDMI for the monitor looks like this and works just fine, what could the error be?
View 9 Replies
View Related
Jun 8, 2011
This HP upgrade from Vista to Windows 7. I have video but no sound at all. I went to intel's website and downloaded the intel graphic drivers. But the sound drivers say un-recognized. In my device manager I see IDT High Definition Audio CODEC and Inter(R) High Definition Audio HDMI. My HP model is dv4-1465dx
View 49 Replies
View Related
Feb 28, 2012
I bought a Samsung HDMI monitor yesterday (model: S22B370H) for my Z68P-DS3 motherboard which has only an HDMI output. The monitor was working fine when connected to my laptop, although with some flickering. When I connect to the PC, rarely it shows a display till the Windows Startup booting screen, after which it is totally blank. The monitor is recognizing and HDMi input but is not displaying it.
View 1 Replies
View Related
Nov 28, 2012
My HDMI connection from my old laptops works but my new x64 does not want to work. I do see the chanel open on the tv when I plug in but dont see video or hear sound.Just a blank screen. Under sound setting, the HDMI option is there but It wont allow me to set it as the default
View 4 Replies
View Related
Apr 19, 2012
I have my Iiyama prolite connected via dvi and another TV via HDMI.As soon as the HDMI is plugged in I lose the DVI display and it transfers to the HDMI. The DVI is no longer detected.Does this mean if I want a second monitor I will have to set it up through VGA?
View 4 Replies
View Related
Jan 15, 2013
Recently I upgraded my vista to Windows 7 and tried connecting it to my HD TV through the HDMI but the screen on my laptop goes blank (black) and no reception on the TV as well. Have an ATI Radeon 4500 Series adapter and HDMI used to work perfectly in Vista.
View 3 Replies
View Related
Sep 2, 2012
when i connect acer laptop to tv using HDMI, I get no sound but the picture is fine. On the sound options I only see the Speakers and Digital Output options but dont see any HDMI Audio output. This used to be visible earlier (and the sound used o work) but this option suddenly vanished.
View 2 Replies
View Related
Nov 20, 2011
I have Acer Iconia W500. It is wokring great in all situation except one. It has one HDMI output. I can connect it to my 24" LCD tv with HDMI cable and works perfect (I can switch between single desktop, clone, extend etc). When I connect to my LG 42" LCD tv using HDMI, the screen goes blank and tv says no signal. When I connect to the TV and start the tablet, I can see starting Windows on both screens. Seems once Windows is loaded, I get no signal on the TV from the tablet. It did work the first time and I was messing with the display setting and I think I accidently turned off backlight on the tablet.I use logmein.com to remote into my other machines. I tried using logmein to connect to this, it works when the tablet is not connected to this TV, but once it it connected to the tv, I only see a blank screen. I also tried UltraVCN, I get same thing, blank screen.I need to know if there is any way I can either delete the LG tv profile or something where when I connect the HDMI cable, it will revert back to default setting and the video will show on both tablet and tv like it does when I connect the other TV.Sorry about long thread, but wanted to make sure I enter all the details of my problem. Below are the system details. 10.1 HD Multi-Touch LED-backlit TFT LCD Display: (1280 x 800) resolution, wide viewing angle AMD Dual-Core Processor C-50 2GB DDR3 Dual-Channel Memory Windows 7 Home Premium 32-bit ATI Radeon HD 6250 Graphics 32GB Solid State Drive 802.11b/g/n Wi-Fi CERTIFIED Bluetooth 3.0+HS Dolby Advanced Audio v2 Audio Enhancement High-Definition Audio Support 2- USB 2.0 Port 1- HDMI Port with HDCP Support
View 2 Replies
View Related
Mar 4, 2012
I bought new computer about 6 month ago. Hdmi worked fine with my tv and I don't know whats wrong now. I know its not the cable because I bought another one and the tv is certainly not because it has 2 hdmi. The computer as I said is almost new so a would be very happy if I wouldn't have to give it repairing.
View 3 Replies
View Related
Apr 26, 2012
Up until the other day, I've been using my MSI Wind u230 netbook / Radeon HD 3200 to output to my monitor (Acer S243HL - only has 1x DVI and 2x HDMI inputs) and then occasionally swap to a Westinghouse 32" TV.The other day: I was using my monitor then swapped to the tv, and then returned to my room to connect to the monitor and it just won't work. (To note, I've been using Win key + P to set projector only and to disconnect projector before unplugging the HDMI cable.)The netbook screen will turn itself off (as if it detects the HDMI-out) but the screen or TV will just show "No signal."I tried a shorter HDMI cable, tried the other input on the monitor, still nothing. Strangely enough, checking the displays in Catalyst or the Screen Resolution properties, it can detect both the TV and the monitor. There's just no signal coming out.Even stranger: trying to connect another laptop to the monitor (which used to work) displays "No signal" too.
View 9 Replies
View Related
Jan 17, 2013
I built a barebone kit and installed Windows 7 Ultimate 64bit, I installed all the drivers correctly but for some reason Windows keeps detecting the front audio jack as if someone is repeatedly pushing in and out headphones(no pun intended). Audio doesn't work at all through front and back audio jacks, only HDMI. I only get static from the audio jacks.
View 2 Replies
View Related
Dec 24, 2011
I've recently purchased a Samsung T23A750 monitor and to my disappointment when I try to watch a movie the built in speakers are not functioning. I have a Sony Vaio Z216GX connected via HDMI to the monitor (HDMI-DVI) port. I can definitely see the video, but no audio is playing from the speakers. The built in speakers are not at fault- I did a self-diagnosis of the monitor and the speakers seem to work fine. I also set the monitor as the default for the audio and even when Win 7 says its functioning properly, the speakers still don't work. Conversely, setting the default to my PC speakers work fine. I'm sure its not the HDMI cable- I used the same one to hook my pc to my tv with everything working fine.
View 4 Replies
View Related
Jan 29, 2012
I have connected my hdmi cable as usual but this time i had on tv display NO SIGNAL. When i connect another pc to check the cable it seems to work correctly.The problem is coming from my pc.
View 5 Replies
View Related
Oct 28, 2012
I'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.
I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.
So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.
View 2 Replies
View Related
Mar 4, 2011
I would like to connect my laptop to the television both have HDMI connections will a hdmi lead work
View 1 Replies
View Related
Oct 31, 2011
how can i get sound from my computer to my tv
View 1 Replies
View Related
Aug 3, 2011
Just wanted some opinions on some cpu fans for my socket 939 Athlon X2 5000 cpu. It's running pretty hot just at stand still about 135 deg. F. At 100 percent load can get to 189 deg. F.
View 7 Replies
View Related
Apr 15, 2009
Does any one know what good upgrades I could get for Socket 462? I am clueless and what not, as this machine is VERY slow and I can't get many tasks done on it, since it's CPU is way to slow. Any processors built for performance and reliable? Any suggestions?
P.S. My current CPU usage when I finished boot up and IE is running.
View 8 Replies
View Related
Feb 21, 2013
can i upgrade my socket 989 duocore cpu to i5
View 1 Replies
View Related
Jul 10, 2012
It fits the socket but does it have to support the CPU as well? I want to buy a cooler and i see in the description that other than the socket they also list what CPUs are supported, but some just say the socket, i'm confused.
View 6 Replies
View Related
Jun 18, 2011
I'm upgrading from an AM3 CPU to an AM3+ when it comes out, and my motherboard is flash able to an AM3+ socket, and I was wondering, in which order would I do this? Flash the BIOS, then install the CPU, or Install the CPU first?
View 7 Replies
View Related
Jul 10, 2012
It fits the socket but does it have to support the CPU as well? I want to buy a cooler and i see in the description that other than the socket they also list what CPUs are supported.
View 1 Replies
View Related
Nov 25, 2012
In theory powered USB sockets (maybe USB2 and later) can control the power if the hardware supports it.
I don't know if my H/W supports this function, but that's a mute point as I've never found any S/W that implements such control. Has Windows7 made any advance over XP in this arena?
This issue comes up once a year, at about this time, as I have USB powered desk Christmas Tree. OK, it has a switch on the bottom, but I'd really like to be able to control it with an application if possible. The tree sits on my windowsill, and it's not easy to reach over my monitors. And yes, if this is the worst of my problems, I'm obviously doing OK.
View 4 Replies
View Related
Dec 3, 2012
I need to replace an Asus P5LP-LE motherboard with a new one... My pc specs are:
Core 2 Duo E6300 Conroe 65nm
3GB DDR2 Dual Channel @667MHz
HD 4870 X2
600W PSU
300GB Hard Disk
I need a new motherboard with:
- Core 2 Duo/Quad/Extreme support
- DDR2 Dual Channel Support
- a PCI-E port for my GPU
- decent overclocking features
View 9 Replies
View Related
Jul 2, 2011
why does my pc asks for drivers when i try to install windows.?
View 1 Replies
View Related
May 16, 2011
screen resolution is too high and driver ia vga graphic adapter but does not work it just 640*480 resolution is preseted?
View 1 Replies
View Related
