"Set Socket To Non-blocking Mode Failed: An Operation Was Attempted On Something That Is Not A Socket.(errno=10038)"
Jan 16, 2013
Failure to connect to VPN per the error below from the log... "Set socket to non-blocking mode failed: An operation was attempted on something that is not a socket.(errno=10038)"Support at VPN vendor suggests that a Windows repair is needed but have no disk as bought the HDD from a repair facility that lost their lease and cannot be located. Should add that I have had a couple of blue screens lately and have run chkdsk /f and tried to do a system restore but all restore points are gone, even though I had several previously.
View 1 Replies
ADVERTISEMENT
Mar 29, 2012
I have a hp 4 month old laptop. I used it yesterday, turned it off, when I turned it back on 4 hours later, it gave me a message that it needed to do a chkdisk, so it ran that, then started in what looks like safemode. It gave me an error message that says "Windows Socket Initialization Failed". I did a little research and tried to do a system restore, there are no restore points found. It will not connect to the internet, it also give me a message that it cannot connect to the windows service.
View 1 Replies
View Related
Aug 3, 2011
Just wanted some opinions on some cpu fans for my socket 939 Athlon X2 5000 cpu. It's running pretty hot just at stand still about 135 deg. F. At 100 percent load can get to 189 deg. F.
View 7 Replies
View Related
Apr 15, 2009
Does any one know what good upgrades I could get for Socket 462? I am clueless and what not, as this machine is VERY slow and I can't get many tasks done on it, since it's CPU is way to slow. Any processors built for performance and reliable? Any suggestions?
P.S. My current CPU usage when I finished boot up and IE is running.
View 8 Replies
View Related
Feb 21, 2013
can i upgrade my socket 989 duocore cpu to i5
View 1 Replies
View Related
Jul 10, 2012
It fits the socket but does it have to support the CPU as well? I want to buy a cooler and i see in the description that other than the socket they also list what CPUs are supported, but some just say the socket, i'm confused.
View 6 Replies
View Related
Jun 18, 2011
I'm upgrading from an AM3 CPU to an AM3+ when it comes out, and my motherboard is flash able to an AM3+ socket, and I was wondering, in which order would I do this? Flash the BIOS, then install the CPU, or Install the CPU first?
View 7 Replies
View Related
Jul 10, 2012
It fits the socket but does it have to support the CPU as well? I want to buy a cooler and i see in the description that other than the socket they also list what CPUs are supported.
View 1 Replies
View Related
Nov 25, 2012
In theory powered USB sockets (maybe USB2 and later) can control the power if the hardware supports it.
I don't know if my H/W supports this function, but that's a mute point as I've never found any S/W that implements such control. Has Windows7 made any advance over XP in this arena?
This issue comes up once a year, at about this time, as I have USB powered desk Christmas Tree. OK, it has a switch on the bottom, but I'd really like to be able to control it with an application if possible. The tree sits on my windowsill, and it's not easy to reach over my monitors. And yes, if this is the worst of my problems, I'm obviously doing OK.
View 4 Replies
View Related
Dec 3, 2012
I need to replace an Asus P5LP-LE motherboard with a new one... My pc specs are:
Core 2 Duo E6300 Conroe 65nm
3GB DDR2 Dual Channel @667MHz
HD 4870 X2
600W PSU
300GB Hard Disk
I need a new motherboard with:
- Core 2 Duo/Quad/Extreme support
- DDR2 Dual Channel Support
- a PCI-E port for my GPU
- decent overclocking features
View 9 Replies
View Related
Feb 14, 2012
I am having issues with a brand new system which has an Intel mainbord. I am trying to connect the system to a Denon AVR1912 unit. Windows tells me that the Denon amp is attached to the HDMI socket (the Denon AVR1912 name is displayed on the icon) but then contradicts itself by saying that it is unplugged. I did discover at one stage that the HDMI icon in the "Sounds" section of Control Panel disappeared. I then had to reload the driver and thought that might fix the problem at the same time, but no such luck. I have checked to make sure that the HDMI socket is enabled in BIOS and that was OK.
View 1 Replies
View Related
Jul 2, 2011
why does my pc asks for drivers when i try to install windows.?
View 1 Replies
View Related
May 16, 2011
screen resolution is too high and driver ia vga graphic adapter but does not work it just 640*480 resolution is preseted?
View 1 Replies
View Related
Mar 11, 2012
I am looking to upgrade a pc to Win 7 Can I use the socket 370 motherboard or should i change it?
View 3 Replies
View Related
Nov 16, 2009
i am trying to set up a virgin media email account on windows live mail. I have followed all the instructions but this error message is still coming up:
Unable to send or receive messages for the Ntlworld (lelleandjem) account. The connection to the server has failed.
Server: 'pop3.ntlworld.com'
Windows Live Mail Error ID: 0x800CCC0E
Protocol: POP3
Port: 995
Secure(SSL): Yes
Socket Error: 10060
View 9 Replies
View Related
Feb 17, 2011
I have downloaded Outlook 2010, and can receive and send mail but there are a few other problems with it, so decided to change to Windows Live Mail. However I keep getting the error message:- "Windows Live Mail error OX800cc0E, Socket error 10060".
View 5 Replies
View Related
Apr 23, 2011
I've had windows 7 for some time now & Windows Automatic Updates have always worked fine. Now I'm receiving a message "Automatic Windows Update failed: Socket 10053 Software caused Connection Abort" from my online-armor firewall. I've not installed any new software recently, nor have I any email or internet connection problems. Also, performing windows updates manually works ok.
View 2 Replies
View Related
Apr 23, 2012
Yesterday I disconnected a useless usb socket and ever since i am getting the message failed to boot when switching the pc on, I have tried taking out the bios battery and left it out for more than 5 minutes, I have tried my windows install disk and tried repair from that but issue still exists. I am running windows 7ultimate 32 bit, and the bios is phoneix, that's all I know.
View 2 Replies
View Related
Dec 24, 2011
What are the cheapest Asus Mobo socket 1155 that support USB 3.0 back panel and 3.0 Mid Board for casing.Because im buying a CoolMaster 690 2 Advance with USB 3.0 Support.I think large motherboard will not fit? because my casing is mid tower right? Can you guys give me a list of compatible motherboards with prices? I think the budget for mobo is max of $170 - $180.
View 4 Replies
View Related
Mar 20, 2012
I bought the SCNJ-CU1000 Fully Copper CPU Cooler back in 2008, originally it was designed for 775 and 478 sockets. Not having that in my box (now) I saw the Universal Retention Kit 3 having seen that the Universal Retention Kit 3 was not compatible with my 1155 socket after all I have been advised that it will work with the mounting bracket I have been looking for here: LGA1156 & 1366 Mounting Clips Note: on the German site it says it works with 1155 sockets as well as 1156 and seen as they both share the same size CPU I don't see any problem with this, do you?
View 1 Replies
View Related
Apr 23, 2012
I recently changed Internet providers, from Primus to Bigpond, and suddenly my Incredimail programme ( which I have used for 15 years or so) has started giving me the message " Socket error 6001 port 587 specified file could not be decrypted"After much time spent trying to get it to work I downloaded Thunderbird, put all the necessary specs in and it works fine. With exactly the same specs, pop smtp, ports etc in Incredimail, it still gives me the same message.It's very frustrating, and yes I have gone right through Incredimails Help pages, but in the end it just tells me to contact the Internet provider, who tells me that they because Incredimail is not one of their supported programmes.
View 9 Replies
View Related
Oct 14, 2011
I have a work issued laptop, with my work email set up through Windows Live Mail 2011. It works fine in the office, but for some reason, when I work from home, messages won't send over my wireless connection.The "errors" I get are "Windows Live Mail Error ID: 0x800CCC0E" and "Socket Error: 10060".It's a standard Toshiba black laptop. The email is a Squirrel Mail account. And in properties, I have the "My server requires authentication" option checked.Forgive me, but I'm not well-versed with the lingo. I do more with design and editing software. Again, it works fine with my internet connection at work, but not at home. So I wonder if it maybe has something to do with my home internet. Both are wireless. Home is DSL through AT&T.
View 1 Replies
View Related
Sep 4, 2012
In preparation for sending my laptop to HP for a hinge replacement, I decided to backup all my data (via System Image). My plan was to then perform a Minimized Image Recovery: so as to wipe off all my data, but still keep the computer running nicely.The attempt to wipe my data failed.Whenever I try to boot my computer now, I am presented with "Windows Boot Manager" [see attached image]I don't have an OS disk.
View 2 Replies
View Related
Mar 23, 2011
I am trying to install printer from network but it gives operation failed with error 0x000003e3.
View 1 Replies
View Related
Mar 1, 2012
I am having window xp running on that hdd but when I am trying to load windows 7 then setup recognize that my hdd having bad sectors and after running set it shows the fail operation of loading windows 7.
View 3 Replies
View Related
Feb 4, 2013
I'm getting this error, but I can still print locally and from the network.
Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 2/4/2013 8:15:49 AM
Event ID: 315
Task Category: Sharing a printer
Level: Error
Keywords: Classic Spooler Event,Printer
[Log] ........
View 4 Replies
View Related
Jul 14, 2011
I have a Dell laptop with Windows 7 Ultimate. While trying to add a network printer (HP LaserJet 4250n) I got the following error message: Windows cannot connect to the printer. Operation failed with error 0x0000007e.
The printer works fine from my Windows 7 Pro desktop, and also from other laptops with Windows 7 Ultimate.
I've tried installing Microsoft's hotfix (982728), installing locally on LPT2 and running 'net use LPT2 \Computernamesharedprintername /persistent:yes', updating the driver. None of these worked.
View 4 Replies
View Related
Oct 17, 2011
I am using Windows 7 - Home Premium 64bit. There is only one user on this machine which is Administrator and this computer is not connected with any networks. I am trying to move all of User's folders to D: drive. I have successfully moved, My Pictures, My Documents, My Videos, Contacts and other folders but when I try to move "Desktop" folder, it gives me an error message at the end of the operation (after coping all the data to the new location) that "Folder Redirection Failed", "Operation was cancelled by the user". I have tried to change the location several times for this Desktop folder but every time I do it, I get this error message.
Now situation is... Data from my Desktop is present in its default location but also copied to D:UsersMyNameDesktop folder. Means, exactly the same data is placed on two different locations but default Desktop location is still at C: drive. Why I am unable to change my Desktop location? I am trying to change the location by right clicking on Desktop folder in User's folder, then Properties and then Location tab. It's exactly the same way by which I moved all of my other User's folders successfully.
View 12 Replies
View Related
Aug 15, 2012
I have two computers I want to connect to a network printer. The printer is a Konica Minolta. When I try to connect it to these computers I get:windows cannot connect to the printer operation failed with error 0x00000002 Both computers are windows 7 and previously were connected to the printer. I had to reinstall the OS on both machines thus the reason Im reconnecting the printer to them. The computers are attached to our domain. Other computers in the office are able to connect to and use this printer.
View 1 Replies
View Related
Mar 31, 2011
at work we use a public calendar in Outlook 2010 that is used to book the conference room. Today multiple users (XP and Win 7) are getting this error when they try to book the conference room. The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.Restarting Outlook has not helped. So far this is only happening in the public calendar.
View 3 Replies
View Related
May 6, 2009
I recently bought a maxtor 500 gb external hdd and i just cant get it to work with windows 7, i got a computer at home where i want to keep it that has windows 7 rc , I have tryed everything i can think of to make it work but nothing does, I cant see it in my computer or with the explorer, but I can see it with computer management, It doesn´t have a drive letter or NTFS and I just cant do anything to it, I cant format it then I get the error "An unexpected error has occured. check the system event log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer".Nothing works, I cant put a drive letter to it then i get the error "The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by using the refresh task. If the problem persists close the Disk Management console then restart Disk Management or restart the computer."Now im getting pretty annoyed with trying different things on it but can´t seem to make it work, now on the other hand it does work on my laptop computer wich has Windows vista, and it works fine, also works on another computer I have that has Windows XP, can anyone please help me with this problem I would prefer to not have to format it since I did put alot of data on it from my other computers but if I have to then so be it .
View 3 Replies
View Related
