I have to restart my Lenovo z570 laptop everytime I need to connect through HDMI to my LG 37 inch TV, and the other problem is if after connection i happen to switch between inputs on my LCD and switch back to HDMI, the connection is lost. (I have gone tru all the necessary HDMI setups and everything seems fine)
View 1 RepliesWhat's been going on with my HDMI port. 2 nights ago I was watching a movie through my Dell Inspiron N5050 laptop through my Panasonic HDTV. Yesterday, I tried to connect my HDMI cable to my laptop and computer, but nothing happened...So frantically I've been searching everywhere and trying what I have so far with no progress...
1.System Restore to earlier date when my HDMI port was working.
2.Toggle Computer/Duplicate/Extended/Projector Only and nothing worked(Also made sure tv was on the right HDMI input)
3.Tried 3 different HDMI cables and HDMI inputs
4.Uninstalled all sound drivers and Display Adapter(Intel(R) HD Graphics Family
5.Contacted Dell and had them try to reinstall drivers
6. Checked BIOS but I couldn't find any enable/disable feature for video.
7. Took battery out of laptop waited for 30 seconds pressed power button to reset.
My Panasonic TV doesn't even show up under my playback devices and when I try and do a dual screen through screen resolution it says another display not connected. I've tried going Intel HD Graphics Control Panel as well...no such Luck! Beginning to think that my HDMI port on my laptop is broken.
My all in one Gateway computer only recognizes one monitor. Attempting to connect via hdmi port.
View 3 Replies View RelatedMy problem is that I my HTPC drops the HDMI connection when I exit media center.
When I am in 7MC I can play all my ripped DVDs, Blu-rays, and music. But when Media Center closes (or in window mode) the HDMI connection drops off. I can see the "No Signal" messeage in the Onkyo display as soon as 7MC closes, and it reconnects again when 7MC opens. I need the connection to say active so I can have sound with NetFlix (apparently it runs outside of media Center even though I launch it in 7MC).
why my HDMI connection is dependant on 7MC running?
Windows 7 x64
ASROCK H67M-ITX/i3-2100T connected via HDMI to Onkyo TX-SR705 receiver
I have a Acer aspire 5536 laptop with ATI Radeon HD 3200 graphics card which i connect to my Pansonic TX-L37G20B LCD Tv via the HDMI output on a regular basis to watch films etc. I have had no problems with the connection since the day i bought the TV and have been happlily using it for the last 2 years.
A couple of days ago i connected the laptop to TV as usual and changed to the correct HDMI channel and got nothing. I disconnecetd the lead and reconnected but still no picture or sound on the TV. I tested the HDMI cable and Tv input by connecting the lead to my XBOX and it worked perfectly.
When i connect the lead to the laptop the screen goes blank for a second and i hear the connection sound as normal however no picture on the TV.
I have checked the display settings and the TV is listed under monitors. I have tried all settings eg extend display, duplicate etc.. and it appears to work correctly but i cannot get a picture or sound on the TV. I did think maybe this problem was due to a recent windows update so i have run a system restore to a previous time when this worked, but no joy. I have also unistalled the old graphics card drivers and installed the new ones from the AMD web site and again nothing.
I just reinstalled Windows7 from recovery discs on my Dell desktop. Sorry, I don't know much about what hardware I am running, but windows7 is a fresh install and everything else works OK. When I plug the HDMI cable from the pc to the tv all I can see is the desktop background with no icons or desktop folders. I can't see any programs either. I do have sound though.
View 5 Replies View RelatedWhen I connect my laptop to my LG using HDMI, I get the error message "invalid format".
View 2 Replies View RelatedWhen I was running windows vista, I could display my laptop on my TV with no issues. After installing windows 7, the TV does not detect any input. I tried pressing Fn F8, and windows P and the laptop says its switching dispays but the TV does not react. I just updated my NVidia drivers. Any ideas?
View 9 Replies View RelatedSome time ago I bought a battery for my laptop (Asus G51JX) and, it didn't work, I've sent it back and bought a new one with the same specifications (11,1V, 7200 mAh, 9 Cells).Now, when I start the computer on AC only, it works fine, but when I put the battery, the little icon on the taskbar goes up and down and then stops, If I remove the power cord, the laptop continues on but for my surprise it says "Plugged in, Charging" WITHOUT the power cord!, how is that possible? it is not from the OS because I tried another HDD with a completely different installation and it did the same, now my question is... Is it BIOS or the Motherboard?
View 7 Replies View Relatedmy handy cam is not detecting,pls help me,shall we install drivers seperately or its in cam,if there is seperate software for sony handycam dcr hc21,if there where i have to downlpad that
View 1 Replies View Relateddell laptop not detecting pen drive?
View 2 Replies View RelatedI'm trying to fix a vaio laptop at the moment and am a bit stuck. The screen doesn't go past the vaio. It just before the windows logo would normally appear. I tried using the windows 7 cd to try a repair or cmd/chkdsk etc, but the OS wasn't found/listed. I also tried to do a clean install and the HD wasn't detected by windows 7 setup. I also tried booting up with ubuntu and the HD still wasn't detected. Can I assume this is a busted HD? Should I still shoot for a bootage diagnostic cd for the hard drive?
View 1 Replies View RelatedI am using a Laptop with a dead screen by running an external monitor from vga port. I am trying to duplicate this monitor on Sony HD tv using an USB adapter to HDMI. On the first go around I got my desktop ...minus any task bars or icons. on the Sony plus sound but could not get the complete desktop to display. (I am thinking now this might have been resolution trouble and my icons were just out sight) Videos play fine on vga monitor but see just windows logo on Sony.
When I go to display settings I see "1/2 multimonitors" and it shows the Sony as 3. That is when I get lost. If I click on identify it shows a giant " 1" and "2" on my vga monitor. at the same time. Then my choices are duplicate, extend, and show desktop. Which should I use.? I am not sure if my vga monitor is 1 or 2.
There is also a "connect to projector". I messed around there and killed the vga monitor (my only one) Had to restore in safe mode to get back to normal vga output.
Look worse than the VGA out on my laptop? The HDMI out has black bars on the left, right, bottom and top. The VGA looks crisp and clear and fills the whole screen on my TV.
View 3 Replies View RelatedI have a HP Compaq 2230s laptop and it has a HDMI port. I use a High-Speed HDMI cable to connect it to my LG 3D Smart TV. I finds the video but it does not get the audio (partially). Once I connected, I tested for sound using the volume mixer and the "ding" is played on my TV. But when I try to play a song from my laptop, it is coming from my laptop speakers!
View 1 Replies View RelatedMy laptop is a HP Pavilion dv7-2078ca Entertainment Notebook PC
Specs here: Product Specifications*
I have my Computer hooked up to the TV through a HDMI Cable and My TV is hooked to a surround sound receiver through
red and white cables.
From Audio Out on the TV
The TV is a Toshiba 37HL57
I tried installing new Realtek and ATI drivers, but I still couldn't get the surround working.
I installed these:-
ftp://webuser:WN4Ic2i@218.210.127.133/pc/audio/HDMI_R229.exe
ftp://WebUser:DAx7h9V@66.104.77.130/pc/audio/Vista_Win7_R229.exe
https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/9-7_beta_win7_64_dd_CC.exe
But working I mean, I go to control panel then sound and for HDMI is only lets me select stereo.
After some research I figured maybe its because the HDMI goes to the TV and the TV itself only has two speakers.
Still there must be a way to do this.
I can't do HDMI to the surround receiver as its a bit old
But, its seems to be surround when playing movies through VLC...
But I tried this surround test.
http://www.halfgaar.net/media/chan-id.zip
and you could defintiely tell there was "audio coming from different corners". But, when the test announced which speaker the sound should be coming out, it wasn't always accurate.
My HDMI connection from my old laptops works but my new x64 does not want to work. I do see the chanel open on the tv when I plug in but dont see video or hear sound.Just a blank screen. Under sound setting, the HDMI option is there but It wont allow me to set it as the default
View 4 Replies View RelatedMy laptop wont connect to my tv via hdmi.
View 1 Replies View RelatedI have a Zotac 570 gtx connected via HDMI cable to my Asus VE258 LED monitor.I've had this video card and monitor setup working before with the exact cable, card and monitor.Something changed in my system where the monitor is no longer recognized for what it is. When i go into my Nvidia control panel under change resolution 1.Digital Display, 2. DVI-PC Display - Resolution 1080p 59 Hz. There is no DVI cable plugged into the computer and the monitor is set on HDMI input. When i go to my Audio playback devices, the HDMI connection does not show up at all, even as disabled or disconnected.When i go to play a game (Diablo 3, Skyrim, Farcry2) The game either doesn't open (skyrim) giving me the error that resolution is not recognized (but then does not give me any resolutions to choose from in the options menu) or will play (Diablo 3) but is stuck on extremely low resolutions with only 2 options.
Here's what i've done. Contacted Zotac and had them send me the most recent drivers for the video card. Uninstalled originals and re-installed the new ones. Contacted Asus (they say its not the monitor as long as its set on HDMI input) I am unable to find a driver that will make my computer (Windows 7) recognize the monitor for what it is. Zotac failed after their attempt with the driver and told me to RMA the card. So i did... i waited a month.
My old laptop connected just fine but my new one doesnt. New laptop has TWO graphics card (intel for 2D and nvidia for more taxing stuff) and am wondering whether thats the issue? I connect my laptop to TV via HDMI but when I hit F1 (to change display output to a projector) the laptop screen changes (As though it has connected to the TV) but the TV isnt showing anything.
View 7 Replies View RelatedI have ASUS UL80V and I am trying to connect it to LCD using HDMI
View 1 Replies View RelatedI want to watch my laptop on the tv. iv pluged in the cable the screen comes on the tv but only small. iv tried to change the resolution and download a tv tunner but they arnt workking.
View 1 Replies View RelatedI am searching for HDMI output player for 1920X1080 resolution for my laptop to my 3D Sony bravia..
View 1 Replies View RelatedMy laptop (Acer Travelmate 5730) identifies my TV's (Sony Bravia and Toshiba) via HDMI cable but does not send any picture or sound. I have tried adjusting the screen setting and resolution but this has not helped at all.
View 1 Replies View RelatedI just bought a Lenovo v570 laptop with vga and hdmi output and I cannot get the hdmi to output to my tv. The tv is a vizio 47" 3d LCD and the laptop is running windows 7 home 64bit. I have tried windows graphics drivers, lenovo drivers and intel drivers. To me there is not much difference between them but who knows. The laptop will output to tv using vga and it will connect to an LG 42 inch LCD at my work using hdmi, just not to the one I have at home. I have tried everything that I can think of as far as settings go and on my tv as well. Nothing changes whatever I do. Does anyone know of any hardware compatibility between some vizio tvs and windows 7? I have seen one on the compatibility website for windows but it was not my tv. Mine is not listed. The model number for my tv is E3D470VX. Not sure what else to try. Next I guess I will call Vizio to see if they can work out the problem. Lenovo support doesn't know.
View 9 Replies View RelatedMy little brother came home from work one night and now is screen doesn't work at all. no flickering, backlight etc. I connected it top the TV via HDMI and even that didn't show up anything.How high are the chances that his graphics card has died?
View 3 Replies View Relatedwhen i connect a rgb cable to my tv and laptop there is no sound
View 1 Replies View Relatedhow can i get my laptop to befull screen on my tv
View 1 Replies View RelatedI have a Toshiba L755 Laptop with Intel Graphics and Media Control Panel. I hooked up the laptop via HDMI cable to a TV monitor. It worked great, but afterwards the screen will not fill up. I can't adjust the overscan and am stuck.
View 1 Replies View RelatedI'm trying to play a movie through my HDMI, but I want to be able to use both my laptop's and the HDMI audio.
In other words I want to be to keep the movie playing on the TV while restricting the audio from playing games to my earbuds, so I don't have to play muted while my relatives watch a movie.
i tried to connect my TV to my laptop through the HDMI port.
but under the screen resolution there is only my main screen.