I have this double sided 3.5mm jack. One end went in to the line in circlular slot on the monitor, the other went into the headphone slot on my desktop.
It was working yesterday, thenm it stopped so I redownloaded the driver. It worked again. However, today it isn't working and I've tried reinstalling the driver.
as stated in the subject, I am unable to hear any sound from my speakers since upgrading to the windows 7 64 bit. I followed the other post that I found on this but I still cannot hear any sound.I have a dell inspiron 531. The hardware ids from the device manager areHDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020E&REV_1000
HDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020EI have installed the realtek drivers and they as working but I still get nothing but a slight hiss from my speakers. I have tried them on my laptop and they work fine.Does anybody know what might be causing this? I am half tempted to get a new sound card but I am reluctant as it says my existing one is working (it just seems to have forgotten to tell the speakers!)
If anybody knows a fix for this I really would be eternally grateful
as stated in the subject, I am unable to hear any sound from my speakers since upgrading to the windows 7 64 bit. I followed the other post that I found on this but I still cannot hear any sound.
I have a dell inspiron 531. The hardware ids from the device manager are
HDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020E&REV_1000
HDAUDIOFUNC_01&VEN_10EC&DEV_0888&SUBSYS_1028020E
I have installed the realtek drivers and they as working but I still get nothing but a slight hiss from my speakers. I have tried them on my laptop and they work fine.
I am half tempted to get a new sound card but I am reluctant as it says my existing one is working (it just seems to have forgotten to tell the speakers!)
I have 2 displays, 1 is a TV 3 meters away hooked up to my graphics card via HDMI and the other other is obviously my PC monitor. I was hoping there would be a way to have sound exclusively on the TV while I have seperate audio on my monitor?Sorry it's a bit hard to explain. Basically I want to play a game on my PC with my headphones on while a film is playing on the TV, but if I try it atm the game shows on my monitor while the film is playing, but the sound of both is coming out of the TV.Graphics card is a HD6870, using Windows 7 x64.
View 3 Replies View RelatedI was getting all sounds from my monitor (no speakers plugged into tower) now when I check the sounds in control panel it says no audio device installed.
View 2 Replies View RelatedI have sound out of h/phones but very little if any from monitors integrated speakers.
View 2 Replies View RelatedI connected my computer to my monitor via hdmi but there is no sound coming from my monitor. i updated all drivers and even tryed to connect the monitor to a reciever from the head phone jacks. i get sound from my computer to the reciever that way byt not thru the monitor. monitor is e2370 lg and my graphics card is ATI Radeon HD 5450.
View 9 Replies View RelatedI run the sound booth with my church and we need 3 monitors to run at the same with each other, we have the sound booth monitor and the front projector to run correctly but we need the stage display to run to. The problem is that windows 7 is detecting the monitor as well as MediaShout 4.5 except we can not get anything to display on it, let alone having the 3rd projector even detect that it is connected to the computer.We have a gateway FX6840 with 8 gigs of ram, 1.5 TB HD Space, the problem projector is a BenQ PB8260
View 6 Replies View RelatedJust picked up a new PC running Win 7 on 64 bit. For some reason, I can't get sounds, the speakers are in the monitor and they work just fine with my XP system.
View 2 Replies View RelatedI wanted a break from the HDMI sound through the monitor to use headphones, and after several other methods, I tried disabling the HDMI sound. That worked great, but now that option for playback device is completely gone! How do I get it back so I can use the (admittedly weak, but still functional) monitor sound?
View 3 Replies View RelatedI hooked up a second monitor to my computer yesterday and I'm really disapointed in the sound quality coming thru. The video is coming thru perfect. This is my set up...1) windows 7 home, MSI p67a-c43 motherboard with integrated audio- realtek ALC892, nvidea gtx 550 TI. I have my regular computer speakers attached to the 1/2" speaker connection port (green) on the computer.2) The TV (second monitor) is a vizio E320vl . I have tried changing all of the audio settings on the TV ( like sound filters and pcm/dolby digital settings that are on the tv to try and correct the problem to no avail. There are a number of hdmi ports on the TV, and one of the hdmi ports (the one it is plugged into) does have rca audio ports next to the hdmi connection, but the audio is being sent via the hdmi and these are not being used.
3) The video card has 2 dvi ports and 1 mini hdmi. My regular computer monitor is being hooked up to the dvi port. and BOTH the audio and video to the second monitor is sent to the 2 nd monitor using the mini hdmi. I am using an hdmi extension because of the distance from the computer (about 16 feet from the computer)Here is what is happening with the audio- while I am getting audio to the 2nd tv ( by changing the playback devices default switch to the second monitor that displays in the computer sound settings, the audio sounds very different from what it should. The best way to describe it is almost like very tinny sounding... almost like listening to it thru a can Music sounds really bad. There is no static or noticable distortion, just sounds bad in comparison to what comes out of my very cheap computer speakers
I have a Dell laptop & have been trying to use it on a external monitor but its not working. It has worked in the past but now its saying cable not connected on the external screen. FN f8 isnt working for it anymore. Any ideas how to get it working again ?
View 3 Replies View Relatedim running build 7100 and after hearing that windows 7 supported heterogeneous graphics cards i was excited to try it out.
ive tried but i can't seem to get it working.
i am using a 8800GT PCIe and a FX5200 PCI.
my first question is, is it not working cos the fx5200 is too old?
I have two computers. The monitor (Acer) on #1 quit working. I switched monitors. #2 monitor (samsung) didn't work on #1 either. I thought it might be my computer. My brother got his monitor working with it. We thought it might have been my cables. I bought new ones. I tried it (with new cables) with monitor from #2. Didn't work. I put the orignial monitor back on, and it works. Now the monitor from #2 doesn't work on #2. I think it might be a driver issue, but not sure.
View 1 Replies View RelatedI just bought a new 23inch Samsung Monitor (S23B370). It have full HD support and also have an HDMI port. I bought a HDMI cable which have HDMI on both ends. I have a VGA (Nvidia 210) which also have an HDMI port. I connected the monitor's HDMI out to the VGA's HDMI port with the new cable and booted. Nothing came. I even set the Monitor's settings to HDMI. But nothing happened. It says check display cable. Why is this? How to fix it? Have I done something wrong?
View 1 Replies View RelatedSo I got a new monitor for xmas, the LG Flatron W1953T and I wanted to get it running with my Dell monitor. I have an onboard NVIDIA GeForce 8300 and at first just tried to plug the new monitor into the DVI port but I think it's broken or something.
Anyways, I bought this Triton Technologies External VGA video card that I just plug into a USB port, and now I have both monitors running through VGA, and my second monitor is up, but the resolution just looks terrible on the second one, and when I go to adjust resolution or whatever it says I have only one monitor and if I hit detect it doesn't come up.
In my devices menu it says I have the dell menu, and then two other "Generic non PnP monitors" even though I only have one other monitor connected.
I also go to my NVIDIA control panel and it doesnt say the second monitor is detected.
Both monitors are working, like I see my desktop background on the other monitor and I can drag stuff over to it but its just not detected or something idk. I want to download Ultramon too, (Or should I get something else w/ windows 7? I heard you cant have two taskbars w seven.
I bought a Samsung HDMI monitor yesterday (model: S22B370H) for my Z68P-DS3 motherboard which has only an HDMI output. The monitor was working fine when connected to my laptop, although with some flickering. When I connect to the PC, rarely it shows a display till the Windows Startup booting screen, after which it is totally blank. The monitor is recognizing and HDMi input but is not displaying it.
View 1 Replies View RelatedBasically i've just got my new laptop this week, had desktop pc's for nearly 10 yrs with internal sound card to power a 5.1 surround system now ive ordered some krk rokik rp5 g2 monitor speakers but i want to be able to play music from laptop with media player etc, through the monitor speakers at good sound quality.i no your can get cheap converters, but i imagine a usb sound card with rca outputs would be a lot better yes?budget around �70 or so. heard creative aint that good for music, more gaming, films, and been told m-audio or tascam are good for audio.
View 2 Replies View RelatedA friend just bought a new HP laptop running Windows 7 Home. They want to connect their old Gateway monitor to the laptop to use as a dual-screen setup. They shut down the system connected the monitor then turned on the monitor and booted the system. When the desktop displays on the laptop it also comes up on the external monitor for just a second and then the monitor goes black. They have also tried connecting the monitor while the laptop was already up and running with the same results. The monitor had been working fine with their old Windows XP desktop system.
View 6 Replies View RelatedI have build 7068. From the start my screensaver and power options are not working. The problem is sometimes they DO work. I am having trouble diagnosing it because of that fact. What would cause this? I just want the monitor to turn off 30 minutes after stop using the computer. That's the main issue. I go to "power options" and set it at 30 minutes and never put to sleep. What am I missing here?
View 4 Replies View RelatedAfter I installed Windows 7, I had by tv connection still showing as a second monitor. Just the other day the display no longer shows anything but the sound is still coming from the tv. In properties the display only shows 1. I also tried detecting and nothing happened. I have a Radeon 9000 video card.
In device manager, other devices is showing video controller with a yellow !.
Monitor is showing - Generic Pnp Monitor
Display is showing Radeon 9250 9200 series
Dual monitor is not working for me on my Windows 7 laptop. I assume this is related to some video drivers
View 1 Replies View RelatedComputer indicates sound card and states working ok. but fails to pick up speakers or a line in from monitor or headphones.
View 4 Replies View RelatedI HAVE RECENTLY INSTALLED WIN 7 ARC GAMER EDITION. I THINK ITS JUST REBUILT OF ULTIMATE.WHEN I CLICK RESOURCE MONITOR ICON IN TASK MANAGER OR IN START MENU NOTHING POPS UP.
View 3 Replies View RelatedI have a IBM Thinkpad T30 with a graphics card ATI Mobility Radeon 7500. I have an external monitor plugged up. On xp I can dual split easily! I just installed windows 7, and it doesn't detect the external monitor. I right click desktop, and select screen resolution. I click detect and the only screen detected is my laptop screen (not the vga external screen). I checked the IBM website, and the video drivers are only for windows xp. I tried to install the driver for xp on windows 7, and an error pops up and says "Setup was unable to complete the installation. Try to setup your display adapter with a standard VGA driver before running setup"
View 2 Replies View Relatedi just received my i7 920 computer today and i got the radeon 5770 1 gb graphic card
after installing windows 7 ultimate i tried to set up the dual monitor and under display it only recongizes 1 monitor while the 2nd monitor does what im doing on the first monitor how can i correct this??
Yesterday, I got a balloon notification saying that there were some Windows Updates available. I like to keep my PC up-to-date, and since I wasn't in the middle of anything urgent I had my Windows 7 32-bit PC download and install them. WU asked to reboot my computer, so I got to a stopping point and clicked reboot.When I rebooted my PC, my 2nd monitor stopped working and wouldn't detect.So I downloaded installed the latest drivers and restarted, nothing. Tried rolling back to a restore point before the updates, nothing. Uninstalled the video card and rebooted, nothing.
I have an ATI Raedon 3600 Series video card, installed into a Dell Optiplex 360, running 2 Dell 19" LCD monitors. Nothing super fancy or extravagant going on hereI am a bit at a loss. I was going to maybe take out the video card and try reinstalling it physically and "softwarically". But I do not think that will aIt was working fine for months, and so I am guessing it has something to do with the Windows Updates that were installed.
I'm on a Sony Vaio laptop with a second monitor connected with a VGA cable. I just switched from Vista to Windows 7 and my second 22" monitor is not being recognized under the resolution screen. It worked perfectly fine on vista just hours prior. I tried hitting the detect button, reconnecting the monitor, and restarting. What am i doing wrong?
It might be my graphics card, im pretty sure i have a nvidia geforce 7200m gt. cant seem to find drivers for it anywhere. My computer keeps telling me all my drivers are up to date, yet my second monitor is still not recognized. this doesn't make sense. Should i just go back to vista?
2 weeks ago my Ink Status Monitor for my Epson Stylus Photo R360 was working fine (Windows 7 Ultimate 64 bit),then suddenly it just stopped working (I'm not aware of any recent changes I had done that may have affected this). It still works on the printer display,but not on the PC. If I select "printer preferences" it is greyed out,but the box to disable it is unchecked. I have uninstalled and re-installed the drivers countless times now (Windows keeps wanting to install Epson ESC/P2 which does not monitor),but I have downloaded the up to date driver from Epson and still no joy.
View 9 Replies View RelatedI've recently purchased a Samsung T23A750 monitor and to my disappointment when I try to watch a movie the built in speakers are not functioning. I have a Sony Vaio Z216GX connected via HDMI to the monitor (HDMI-DVI) port. I can definitely see the video, but no audio is playing from the speakers. The built in speakers are not at fault- I did a self-diagnosis of the monitor and the speakers seem to work fine. I also set the monitor as the default for the audio and even when Win 7 says its functioning properly, the speakers still don't work. Conversely, setting the default to my PC speakers work fine. I'm sure its not the HDMI cable- I used the same one to hook my pc to my tv with everything working fine.
View 4 Replies View RelatedFor the past week or so my sound is not working at all. I've tried restoring to an earlier point and that didn't work. I went into realtek audio manager and my speakers are set on default. I don't know what else to do.
View 2 Replies View Related