0x80070057 New System Any OS Won't Install - 32 & 64 With Any Ahci Driver
Apr 7, 2011
I've bought à MSI P67-C45 mobo with Intel i5 2400 CPU, and GSKILL 6Gb of RAM, with SATA WD 1To with 64Mb cache.Nothing works, system can't format frm Vista to Seven, 0x8007005x errors... tried every AHCI/IDE/RAID driver and mode After ~10 days of searching all night on forums, I bought an ASUS P8P67 LE Mobo I tried 2 different DVD Drive, internal & USB, at least 6 SATA cables, one SATA6G certified... Tried XP from SP3 to VISTA, SEVEN in 32 & 64... on CD/DVD,USB KEY Nothing works, tried each .inf driver found on cd or on ASUS or MSI website, nothing works...Tomorrow will go to buy a new HDD, but HDD tested under several boot cd, no problems, 0 dead sectors...the only positive was on ASUS when put on MARVEL SATA6 and not on Intel SATA, but same result, once I'v copied 1% before it stopped and error 0x800700...
View 5 Replies
ADVERTISEMENT
Jan 3, 2010
I am unable to create a system repair / recovery disc by either running recDisc.exe or using the option to create a recovery disk in Backup and Retore. It says System Repair Disc could not be created. "The parameter is incorrect (0x80070057)". I have tried using both a blank CDr and a DVDr. I am running Windows 7 Ultimate 64bit. I am wondering if this is caused by how I setup my dual boot system.
I installed Win 7 to a clean HD first. I noted that it set up a 100 Mb recovery partition. I then realized there was no good way to convert this to a dual boot, so wiped the partitions and set up four news ones: one for XP, one for Windows 7, one for data, and a 133 Mb one in hopes that the installation process would find and use it for the recovery partition. I installed XP first, and then Windows 7 and directed that installation to the partition I had previously setup for it.
View 9 Replies
View Related
May 20, 2011
I am trying to install windows 7 ultimate x64 on a new build, I am getting the error in thread title when it begins to install. I've scoured this forum to see what others had similar issues and tried the fixes. I tried with one stick of ram, tried re-burning the iso, i've used 3 different discs one 32 bit the other 2 x64. The funny thing is, I have installed ubuntu 10.10 succesfully from a usb flash drive, but could not install ubuntu from a disc. The ubuntu cd was not a burnt copy but a legit disc i ordered from canonical. the windows install wizard lets me create partitions and delete them, it even looks like it tried to format the hard drive because when i go to attempt to install again evidence of the previous failure is there as a system and primary partition. since the 10.10 installation from flash drive went without a problem i do not believe there is a problem with the hard drive. the dvd drive is sata and is connected properly.
my system info is as follows
amd athlon II x4 630 cpu at 2.8
4gb ram
asus m4a78lt-m motherboard
wd caviar black 640gb HD sata
lite-on dvd multi recorder sata
ati xfx 512 mb video card
my boot settings go to the hdd first and i tried using the popup menu to boot from disc, for some reason it looks like it has a problem writing from the dvd drive to the hard disk.
View 2 Replies
View Related
Dec 20, 2009
I'm trying to install Windows 7 and keep getting the error message "0x80070057, Windows Setup could not configure boot manager." I'm using an OEM disk. Can anyone point me in the right direction?
View 5 Replies
View Related
Jun 30, 2010
In doing a clean install of Windows 7 Ultimate (32 bit), an error appears when it gets to "Expanding Windows Files". Error 0x80070057. Had a look to see if any others had the same problem and many did. I've tried what others have suggested including wiping the hard drive etc etc. Now the strange thing is I have installed Windows 7 Ultimate (32 bit) (same as the one above) already, on the same laptop, with the same hard drive and everything and it installed without a problem!!
View 9 Replies
View Related
Aug 7, 2012
i tried to do a clean install acording to your suggestion , but this error kept coming up windows error 0x80070057... I'm using asus P6T mobo (no on board gfx option) nvidia gtx285 gfx, 2mb ram, and that's all... The hdd is newly formated..
View 7 Replies
View Related
Oct 16, 2011
I have leptop first I want to recovery but I press format hard drive partition to result in full unlocation not left a single partition 465gb partition unlocation there are leptopku 500GB hard drive and I try to enter recovery dvd lg dvd but do not want the road containing the message dvd / cd rom # 1 not complete, and I also had to replace the windows wishful dream but apparently there is an error code: 0x80070057
View 3 Replies
View Related
Dec 19, 2011
I decided to replace my hard drive because it seemed to have viruses that were making it run incredibly slow. I put in a brand new hard drive and proceded to run the Windows 7 Ultimate disk. I got as far as the beginning of the actual installation (after telling it what partition to put it on) and it ran for a few minutes and then I got the errror message 0x80070057.
View 2 Replies
View Related
Dec 17, 2011
What do I do now? I decided to replace my existing hard drive as I thought it was damaged due to viruses. I installed a new hard and then used my Windows 7 Ultimate DVD to install. I got as far as the above. If this question has been answered somewhere else on this site
View 3 Replies
View Related
Jul 16, 2009
I have the GA-EX58-Extreme Board and have just installed the pre release of Windows 7 7600 64 bit. Normally i have experience to get the BSOD when in staling with AHCI active in bios so i change to IDE mode. Installation went flawless and also the change to AHCI mode on Intel ICH10R controler went normal.
As always i got problem to change the J micron controller to AHCI and of cause i got the BSOD again. I installed the latest R1.17.48.16 driver and tryed again but no luck. Can some tell me what i am doing wrong. ? I have a hardisk and a dvd drive attached to the J micron Sata connection.
View 3 Replies
View Related
Aug 15, 2011
my computer crashed last night and when I have tried to switch it on since it gives me the above message.I have tried entering setup by pressing F2 and changing the hard disk to be the primary boot device, but the same thing occurs.I have created a Windows 7 32-Bit recovery disk by downloading the iso file on my dad's pc and burning that to a dvd. I am able to load this, but when it first starts up it has a table supposed to list operating systems but it is blank and I cannor select anything. It says if my operating system isn't listed, "click load drivers and install drivers for your hard disks" but I don't know where on earth these are located and neither does google seem to.then working through the option on the menu:
-if I click start-up repair it tells me "startup repair cannot repair this computer automatically"
-if I click system restore I get an error message saying I must specify which windows installation to restore
-if I click system image recover it gives me an error message saying "windows cannot find a system image on this computer" and if I try to select one none appear.
View 10 Replies
View Related
May 17, 2012
i have an m17 r2 alienwAre laptop.in the bios menu the sata option HCAI is selected but when the comp boots it says no operating system is found when booting for bios sata option RAID it runs fine. But the comp should be on HCAI in order to run features that a specific to that computer . I have tryed reformatting but in HCAI it on finds the second of 2 500g hard drives but the partition with the boot is on hdd1 not hdd2 . Boot up again with RAID it finds both and and I can reformat have tryed to reset the registry and have tryed using drivermax to find out if I'm missing sata drivers I've also tryed reinstalling my bios from the dell
View 6 Replies
View Related
Oct 21, 2009
I have found on 4 different boards if I install in AHCI mode, Windows 7 seems to "find" the drivers for running in AHCI/RAID mode at install. If I install in IDE mode, it does not and I have no option to switch to AHCI/RAID if needed. In the past you had to press F6 (or whatever) and install them from a floppy. I think this is no longer the case with Windows 7. Can anyone confirm this. I don't even have a floppy and never will. I will install in AHCI so I have the choice in the future. Is there any down side to doing this and am I right?
Also - I know there is a registry "hack" you can use to boot into AHCI after installing in IDE but why does everyone not install in AHCI so they have the choice? Am I way off here? Are you planning to install in AHCI to have this benefit?
View 5 Replies
View Related
Jun 29, 2011
I created a system image on an AHCI system, then I replaced the hard drives & re-imaged the system. Now Windows won't boot in AHCI mode, it has to be it IDE mode. Why is it not booting in AHCI mode?
View 5 Replies
View Related
Mar 27, 2010
Im tryin to get my 64GB Mtron SSD runnin with Windows 7 but I can't get it to show up in the installation process. It shows just fine in the BIOS, in device manager, in My Computer and in Windows Disk Management, in fact I can even use it as storage but for some reason It will not show up as a disk to install Windows. I have tried as IDE in BIOS and AHCI and in AHCI mode it will not show up in the BIOS at all or anywhere, I can only get it to show in IDE mode. It has been fully formatted and has had Windows 7 on it here recently (had to reformat due to some speed issues). Does anyone know a way I can get Windows put back on, preferably in AHCI mode cause Im stuck with a Thousand dollar drive thats good for storage only
My board is the Gigabyte GA-EP43-UD3L with BIOS F8 which according to their site is the latest one. Processor Q8600 and 4GB of OCZ Flex RAM...
View 9 Replies
View Related
Mar 17, 2009
I have a PC that is all SATA, including the DVD drive. I prefer to set the SATA controller for AHCI for the bit of extra performance. However, build 7000 will not install from the DVD drive set like that. So I changed the SATA controller to IDE and was able to install build 7000. I then manually changed the SATA driver to AHCI, rebooted and changed the SATA controller to match. That works, of course. With build 7057, however, I was able to perform the install with the SATA controller set to AHCI. A nice improvement.
I also noticed two other things. The magical 200MB hidden partition is now 100MB, and I think I saw a speed improvement copying HDD to HDD. At one point I saw 130MB/sec copying back files to the C: drive (new 500GB Hitachi) from the V: drive (year-old 750GB Seagate). This PC has an ancient 3.2 GHz P-4 on a new motherboard.
View 4 Replies
View Related
Mar 1, 2011
Im installing a new SSD and i wanted to use it as an oppertunity to change everything over to AHCI and wanted to clarify one thing before i went ahead. Im going to change the setting to AHCI in the bios and then install windows 7 on the SSD. Once i get into windows i was going to plug in the old Hard drives. With the old hard drives being used when my computer was on IDE will they be able to be read or will all the data be lost.
View 1 Replies
View Related
Sep 21, 2011
I recently swapped out my motherboard for a Gigabyte GA-970A-UD3. I was trying to overclock my CPU and after a crash and CMOS reset I was no longer able to complete WEI. This was fixed by reinstalling the BIOS firmware but when I ran WEI again, I was now getting a 5.9 score for my SSD (OCZ Agility) when it was previously 7.2.
Now I can no longer get Windows to use the AHCI driver (neither MS nor AMD) for the drive. I am running in AHCI mode but the driver being used for the SSD is a generic "disk drive" (disk.sys and partmgr.sys). When I try to update this driver, it tells me I am using the latest one; it also does not let me manually select the AHCI driver.
After multiple attempts at switching back and forth between IDE and AHCI in the BIOS, uninstalling and reinstalling AMD AHCI drivers, nothing changes. Still the same 5.9 WEI score and generic driver.
View 2 Replies
View Related
Jan 6, 2009
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
View 0 Replies
View Related
Oct 22, 2009
I'm trying to install the Windows 7 32-Bit upgrade on my Dell Inspiron 1721 laptop and I get an error that says that I need to update my ATI AHCI Compatible RAID Driver. I went into the Update Device Drivers as suggested in the instructions and tried to upgrade that driver, but it says I have the latest driver for it. So I tried restarting my laptop and ran the upgrade setup again, and got the same error message.
Any ideas on what I need to do to get it to upgrade? I tried searching all over and can not find a newer version than what I have (2.5.1540.48).
View 9 Replies
View Related
Sep 19, 2011
Can someone hit me with a link for manually installing the AHCI driver and switching the OS mode for the storage controller.
If I remember right, this is just putting the driver in /sys/drivers, running a script, and making a registry change. Then you reboot, change the motherboard setting, and then install IMSM after the OS comes back up. I don't remember the script, or if it was just a reg edit, etc.
View 5 Replies
View Related
Jun 16, 2009
I have been reading for days and don't understand this. When I get a system built using all SATA drives...is the best setting in the bios AHCI?
I know the RAID setting requires drivers and IDE does not but how about AHCI?
Should I even use this setting? Does it require drivers or does Windows 7 have "generic" ones?
View 8 Replies
View Related
Jun 19, 2012
I have a W7 64 bit machine and I am trying to update the RAID controller driver without success.I am blocked by W7 from updating the driver and get the "Windows has determined that the best driver is already installed" message.I have tried to work around that and have been unsuccessful.Ultimately I am trying to enable a program "Hard Disk Sentinel" to view and display hard disk SMART info. Unfortunately the RAID driver controlling the HDD's on my PC have a date signature of 2009 and need to be updated to take advantage of SMART information technology
View 3 Replies
View Related
Nov 27, 2012
I have recently installed a Crucial M4 256 GB SSD in an Acer Aspire 5742 laptop as a replacement for it's aging HDD. This was followed by a clean install of Windows 7 Home Premium 64 bit on the new drive.
So my next step is to ensure that the system has all of the appropriate and up to date drivers installed. Most of the relevant information I found on the Acer website:
[URL]
I am familiar with most of the device drivers listed here and don't expect to have any trouble tracking down the best versions currently available but I am not sure about the "Intel SATA AHCI" driver in particular. It has been my understanding that to enable TRIM on an SSD dedicated as the system drive you just have to set SATA mode in BIOS to AHCI and windows will take care of the drivers during install of the OS.
So my question is will I see any benefit in installing the latest Intel AHCI driver (ver 11.6.0.1030) over the MS one originally installed with Windows?
Alternatively is it a better idea to leave the configuration as it is (working pretty well) and avoid potential software conflicts?
View 4 Replies
View Related
Apr 3, 2012
im a user of original 64bit win 7 Home Premium . using Toshiba Satellite P755.i use core i7 2670QM 2.2Ghz with Boost. Nvidia GeForce GT 540M 2gb vRam. 4gb 1333hz ddr3 ram have Bluetooth. Wireless.1 partition of 640gb im using perfectly windows 7 with nothing fail. but im about to fail now because my windows system now are so crash.i never backup anything. but installing to many games at once.so the sistem start to crash after i dont have an antivirus for 2weeks. and my hardosk is about 36.0KB free of 600GB now the hardisk drive have back about 70gb after several delete.i buy a leptop with already installed fresh windows. So No Windows 7 DVD.firstly with the error 2203. internal error where i have limited in installing and uninstalling program that use windows Installer. i cant even install angry birds!when im trying to update several driver manually after windows update fail.My bluetooth start to fail, Showing error 43(Device Manager). then i rollback. it shows error 10.device cannot start. even if i restart windows 7 several times.i managed to clean this error 2203 with 1month google and trying several. BUT, it starting to be weird after that.So, after all this mess i've created. im starting to think for no more solution instead of FRESH SYSTEM INSTALL.
1 :i have no win 7 Home Premium DVD. can i download it at microsoft?
2 :i dont care if i loss ALL the data nor installed software. but i do care about the Driver in my Laptop ex:Nvidia Driver.
Intel Driver. i dont want to reinstall every driver back by googling for download because i may have missing something.
can i backup it? all i wanted is just a fresh system with main driver or hardware. is there a way of doing it without fresh install if it more more easier then it. Such as downloading a fresh system restore .iso file? dont give me simple answer the give me headache, im not pro with computer
View 3 Replies
View Related
Feb 2, 2012
We just brough, a HP Officejet Pro 800 wireless,and cannot, install the driver, it said that the operating system cant support It say the system canot support it
View 2 Replies
View Related
Jan 15, 2013
Install system speaker driver windows 7?
View 2 Replies
View Related
Jul 5, 2011
I have DellGX280 machine ...i have install win7 than install all drivers than restart computer ...again detect vga drive.. every time i restart system the detect vga driver.
View 2 Replies
View Related
Nov 26, 2012
I recently bought a dell latitude E6410 laptop running windows 7 ultimate. A few days ago it started playing up, at first I thought I had a virus of some sort as my protection had run out, so I downloaded another protection plan and ran a test which came back clean. Then a message came up up from windows saying that I needed to install a "P2P driver" and do a upgrade. So I downloaded the driver and did the upgrade which seemed to work. The next day I started up and it went straight to the start up repair, which came back saying my system cant be repaired automatically. I can get as far as the system recovery options. I tried a "system restore" and that didn't work, and a "windows memory diagnostic" and still nothing. I haven't done a back up disc or have any other discs so I'm pretty much stuck in a loop now. I've been looking into the "system image recovery" but have no idea what that means or what to do.
View 4 Replies
View Related
May 9, 2011
I am using Plantronics usb headset...it say unable to install and at same time my hp laptop it say no base system driver...
View 3 Replies
View Related
Aug 16, 2011
I recently purchased a wireless adapter for xbox 360. its not a genuine microsoft product. i have tried everything to install the driver but everytime it says "Windows found driver software for your device but encountered an error while trying to install it xbox360 wireless reciever for windows The system cannot find the file specified" does windows simply not allow unsigned drivers at all anymore? i have tried installing in test mode, but still no joy.
View 1 Replies
View Related
