I just installed a clean version of Windows 7 64bit, installed the latest driver from MOTU, and now I'm getting an instant BSOD any time I try to connect my 828 MKII audio interface. Did not have issues with this setup prior to reinstall. I've come here from this thread on motunation: MOTUNATION - View topic - "blue screen" error with my motu 828mkii FW
View 1 RepliesOkay here's a problem I haven't experienced in any other Windows OS The problem simply is that whenever I receive an instant message via Yahoo, AIM, etc., the alert plays but, my Media Player pauses just for that second it takes for that alert to play & continues to play afterward This happens with both my system speakers & headphones. Is there a way to make it so that my audio doesn't pause?
View 7 Replies View RelatedI have a problem. FireFox on both my laptop and my stationary comp triggers a BSOD instantly when started.
The stationary runs Windows 7 Ultimate RTM 64-bit and the laptop Windows 7 Pro Retail 32-bit, both from MSDNAA.
BSOD: BAD_POOL_HEADER
Firefox version is 3.5.2 I think.
Atleast on the laptop FireFox runs fine on XP.
I have Reinstalled FireFox (not saving anything, clean version) to no avail.
Since it's the same exact Blue screen on both machines I'm ruling out any hardware-problem.
Yesterday everything worked flawlessly on both computers.
6 hours ago FireFox stopped working on my laptop.
It still worked on my stationary until 30 mins ago when I rebooted it and it started there too.
I've searched all harddrives on the laptop with Macbytes MalwareBytes, SpyBot Search & Destroy and Avast! anti-virus with no results.
My guess is that some update to FireFox/Windows 7 all of a sudden made
this happen, which only came into effect when I rebooted.
Anyone else have this? How could I solve it?
Has anybody heard anything new on Instant Boot for Windows 7?A mate of mine was telling me about it tonight as he has it on his ASRock Motherboard and it takes his PC about 4- 5 seconds to boot to the Desktop.Is the ability to boot in such a short time a part of the BIOS or is it a small program that you install?
View 2 Replies View RelatedI noticed some slowdown immediately after startup on my laptop. I tried installing 3 OSes, all with the same results. After a couple of days, the computer will work for a couple of minutes, then DRASTIC SLOWDOWN that makes the computer unusuable. When I went to install each OS, even that was slow (I.E.) the install windows were slow to come up.. I suspect hard drive failure.
View 1 Replies View RelatedI have recently upgraded my laptop from XP to 7, only to find that my Linksys Instant wireless card is incompatible with this version of windows.I have tried to trouble shoot the problem using the instructions windows gave me, which included running the setup under windows xp compatibility, but the setup doesn't even run. An ethernet suffices for now but soon i'll be traveling and I'll need the wireless.
View 5 Replies View RelatedHow do I turn off Instant On using an Asus laptop
View 2 Replies View RelatedI am working in an office and would like to know if there is some sort of instant messaging capability in Windows 7. We would like to be able to message other computers in our small (5 or 6 computer) network without having to get up and walk around or use a phone page (some people have headphones in). I seem to remember a feature in Windows 2000 that had some sort of messenger. Is this possible in Windows 7 or any good non-invasive program that would work? We don't really want to go the route of AIM.
View 2 Replies View RelatedOutlook 2010: Instant Search not working when Cached Exchange Mode is turned on.My Outlook able to perform Instant Search when Cached Exchange Mode is turned off.I had tried:
1. Created new Outlook profile.
2. Enabled Windows Indexing Service.
3. Rebuild Windows Index.
how do i send and reply to an instant message on imesh
View 1 Replies View RelatedI am on Windows 7 Professional, 64 bit.i7 processor with 12 gb ram 10k rpm Sata 3 boot drive Graphic Designer using Photoshop and Illustrator, and a variety of other programs.I have used Memeo Backup Pro in the past for backing up my files INSTANTLY upon saving the file.... I liked that it did that. Not into waiting till the end of the day for a scheduled backup to run; I've lost too many files in the past due to corruption after working on them for an hour or less....I would lose a LOT of productivity if I got hosed after working on a complex Adobe Illustrator or Photoshop file if it crashed after working on it for even a half hour.I save often, and Memeo saves a backup to my predetermined destination drive instantly. HOWEVER.... Memeo is buggy as heck and it has screwed with programs and caused Windows 7 functionality problems....So... I am wanting to try another, similar backup program that might have better user reviews. Can you help? I tried a demo of Live Backups and it sucked... couldn't even get it to work after setting up the parameters ....
View 2 Replies View RelatedI am trying to update the BIOS of my 'ASrock Z68 Extreme4 Gen3' from v1.00 to v1.20. I am running Windows 7 64bit Ultimate. I got the BIOS file from: [URL]. It did not register the BIOS file I had put on my USB drive when going to my BIOS settings. There is an "Instant Flash" function in there. I have tried to make a bootable USB-drive to do it directly from DOS, but my drive can't be formatted as an MS-DOS boot drive. I have tried using HP DriveKey which seemed to work as intended, but it didn't work, the drive was still not recognized in bios. Do you think it's my drive? I don't have another drive with me right now to try it out. I know this is a not really a Windows 7 issue, but I couldn't find a proper category.
View 6 Replies View Related2 nights in a row my machine has shut down instantly whilst i have been downloading many torrents via utorre### and playing skyrim or within seconds of closing down skyrim. to start up the machine i have to switch of the psu and unplug it. then plug it back in and witch it on. i have experienced these types of crashes before on a diferent machine. a have a sturdy 1000w psu. and even though i have multi tasked these two programs before. this is the beginning of a bad day
View 9 Replies View RelatedI am running Windows 7 Ultimate on HP Pavilion DV2000 laptop.I found that some DVD's won't play on the machine. In My Computer folder, the F: drive does not change even if I insert a DVD. There is no issue about playing CDs and some DVDs. I found that the DVDs which refuse to get detected are mostly commercial DVDs.Is it an issue about DVD region?The drive is 'hl-dt-st dvdram gsa-t20l ata' and it was by default coded to Region 2 (though I live in Region 5 - India). I tried to change the region but I was not successful. I then installed region killer and now the default region is region 5. However, even this has failed to detect the DVD.
View 4 Replies View RelatedI installed 7 with two monitors hooked up and turned on and it detected both of them just fine. But after the install when I boot to windows if both monitors aren't "on" when I boot it won't detect the second monitor when I turn it on. I have to boot with both monitors on for it to detect both of them.
I just want to see if anyone else has experienced this same problem?
i have connected my monitors via displayport to my computer. displayport is very nice, but it has one feature that is - in combination with windows vista/7 - very bad. displayport specification says that if a device (Monitor) will be turned off (standby) it will not be visible to the computer anymore. that is very annoying because windows has a routine which permanently checks if all monitors are still connected. if one monitor will be physicly disconnected, then windows will reorganize the desktop (all content that was on the disconnected screen will be moved to the others). if the monitor will be turned on again windows will move the windows back to the place where it has been before, but often it does not work correctly.
View 2 Replies View RelatedThing is, that applications know your hardware somehow from somewhere.You get something like this in some games.Your CPU: C2Q6600 ~ 2.4GhzRAM: 2GBGPU: NV 6600Is there a way to block or alter this for applications? Either for worse or better? want to change this detection mechanism that reports your current hardware configuration to aplication.
View 20 Replies View Relatedi am using external western digital hard disk, i am unable see it on my desktop. but it's showing in disk management. please assist on the below issue a lot of important data in that harddisk.
View 2 Replies View Relatednow I get this message: interactive services detection for ntvdm.exeI searched through Microsoft answers and it recommended that I can stop it from services window,so I did that and now the message doesn't pop up(should I stop it?is gonna make problems because I stopped it?)but I know there is a problem because it began to happen after my update and I didn't get the message before the update.(I have my driver back ups before the update should I restore them?)
View 1 Replies View RelatedAll of a sudden, my sis's laptop got into a loop of continously detecting a Power Saving USB. The "sound" of detecting something being plugged into the laptop keeps ringing.
I checked under Devices and Printers and there's a Power Saving USB icon which keeps flashing on and off.
I am using HCL ME 74 series laptop with win 7 OS 32 bit. recently my OS crashed and I reinstalled the OS. surprisingly there are no netwrok controllers in my device anager. the network adpters give by HCL have been used. But the system is detecting the wifi networks all around but not connecting. The HCL ME series gives some funny buttons to press: set wifi enable -> Fn+F11, and bluetooth -> fn+F12 . both are enables.
View 4 Replies View RelatedI've been testing AVAST 4.2 fairly rigorously on both VISTA X-64 and Windows 7 7100 X-64.
Straight from the MS site I downloaded the .VHD Virtual disks (XP compatability mode)
AVAST reports that the .VHD file contains a "COMPRESSION BOMB". Now this doesn't actually tell me what this is -- but the fact that it reports something with the word BOMB in it means it can't be good.
Now as this VHD file was downloaded from the official Microsoft site I assume it HAS to be OK (or does it - I would imagine MS regularly checks its own websites - there's plenty of people out there who'd jump at a chance of attacking a MS site if they could).
I'm going to download the XP comparability mode again and have another scan.
VISTA again reports the file as CLEAN) so I think there still might be a couple of things AVAST need to fix in Windows 7 when reading compressed or "archive" type files.
i want to say that i do not want any detection indication in my pc.i m using window 7 and it causes a problem in detection of usb pendrives and ipod.so i want to remove the detection of usb from my system.can further it will help me in using pendrive and ipod?
View 2 Replies View RelatedMy laptop crashed earlier while I was printing a document. After getting up and running again, I have been bombarded with one message that keeps appearing almost 10 minutes each time. It reads;
Interactive Services Detection:
"A program running on this computer is trying to display a message" involving
Message title: Windows Internet Explorer
Program path: C:Windowszsystem32IEFRAME.dll
When I view the message it takes me to a blank desktop with an internet explorer window prompting me to fill in a survey on my printer.
Since I have no time or interest in filling this out, what can I do to make Windows shut up on this matter? I have no idea if this is a malware related problem or not since scans are not showing up suspcicuous files.
I have this problem that interrupts when I do something on full screen (interruption on every few minutes)*FOcus lost to:Interactive Service Detection*It does not pop up any dialog, but just for a sec I can see something on my taskbar then disappear.After some research, I found that the service name that interrupts is UI0Detect.exe. I can stop the process in Task Manager, but it will show up after a while.And I checked on services.msc, the "Interactive Services Detection" has a manual startup type.
View 1 Replies View RelatedI have a SONY vaio vpcea16fg , and a windows 7 professional installed on it. I want to disable windows from auto detecting my built in usb 2.0 camera. I have disabled UPNP and SSDP services, but it doesn't work. I mean when I restart my machine in detects usb camera and install it again!
I want to disable my webcam auto detection, because there is a hardware problem with my built-in webcam and causes a blue screen error. When I move my laptop's lid, windows detect the camera and try to install it automatically, but after two or three times of detection a blue screen is occurred.
I use the MS Wireless Keyboard 1000 and MS Wireless Optical Mouse 2000 with my HP HDX 16t (dual core) notebook running Windows 7 x64.
I installed both Intellipoint 7.0 and Intellitype 7.0. About 50% of the time when I boot, the mouse driver fails ("This device cannot start"). I have to manually uninstall the driver and then search for new devices. It re-installs the driver and then the mouse works fine.
Windows update had 3 recent files--update to Intellitype and to Intellipoint I think. Also a MS Mouse and Keyboard Detection Driver (USB), Driver ID = 20305405. It fails to install after many attempts. I've tried turning off all start-up programs without success. Error code 80070103. I think if this could get installed it would end my mouse driver problem. Any help?
I recently took my internal hard drive and bought a casing for it and made it external. But when i connected it to my computer the disk management showed it as invalid dynamic. So i went online, read a bit about basic and dynamic and ways to convert the latter into former. I adopted the method of converting through changing "hex" using "HxD". Now when i changed the '47's to '07' , i got back my three partitions without any data loss one of which was system reserve. I do not know how to get the rest back. cannot loose the data. I have to get the other three back. Total no of partition =6 (including system reserve) No. of partitions recovered = 3 (including system reserve) No
View 1 Replies View RelatedWorking on my friends desktop computer and the BIOS doesn't detect the hard drive all the time. If I cold boot or reset the machine the hard drive is not detected. However if I pull the CMOS battery and power cord then drain the capacitors (by pressing the power button) and replug the power the drive is detected by the BIOS and starts booting windows (then freezes). The Computer can boot from CDs fine (from IDE cd drives). When I power up the machine without draining all of it's power/ removing the power cord the BIOS gets stuck detecting the SATA drive. I tried the Hard drive in my machine it and worked fine so I don't think its a drive/cable problem. I also tried one of my known good WD drives in the machine and it doesn't detect it. I have tried replacing the signal cable. Default settings (no options for IDE/AHCI just enable or disable SATA). I'm not sure if windows freezing is a 2nd problem or part of the first.
Motherboard: Gigabyte GA-k9ns Version F9
Drive: seagate 500gb sata (also tried a WD green 500gb & black 1TB)
I want to disable all auto play, auto monitor detection, auto audio detection, ect. i want to tell windows that i have X amount of monitors and to always display on them, that i have 7.2 surround and to ALWAYS send audio out via HDMI. if i unplug the hdmi or a monitor i dont want windows to do jack i just want it to sit there and play/display to a component that is not plugged in. all this auto detection crap does is waste my time and cause issues with my day to day computing.
View 2 Replies View RelatedCam software detected the windows 7 bit 32, what I do?
View 1 Replies View Related