I want to disable all auto play, auto monitor detection, auto audio detection, ect. i want to tell windows that i have X amount of monitors and to always display on them, that i have 7.2 surround and to ALWAYS send audio out via HDMI. if i unplug the hdmi or a monitor i dont want windows to do jack i just want it to sit there and play/display to a component that is not plugged in. all this auto detection crap does is waste my time and cause issues with my day to day computing.
I have a SONY vaio vpcea16fg , and a windows 7 professional installed on it. I want to disable windows from auto detecting my built in usb 2.0 camera. I have disabled UPNP and SSDP services, but it doesn't work. I mean when I restart my machine in detects usb camera and install it again!
I want to disable my webcam auto detection, because there is a hardware problem with my built-in webcam and causes a blue screen error. When I move my laptop's lid, windows detect the camera and try to install it automatically, but after two or three times of detection a blue screen is occurred.
When I plug in or unplug my external display to my laptop, my display options no longer automatically reconfigure as they used to do. Now if I unplug the monitor, Windows acts as if it's still there, and windows that were on the monitor stay offscreen (as does the cursor, if that's where it was). I can manually move the cursor back, right-click load graphics properties and make changes OR do an F-key combo to move everything back on the laptop screen OR program a hotkey but these are all pretty annoying for one reason or another. Unfortunately this must have started happening sometime in the last two weeks--at the same time as I made a load of major computer changes.
However this did NOT include a graphics driver change (my graphics driver is current). At this point I feel it could be anything, but I'm wondering if it could be a recent BIOS update I did that HP recommended. By way of troubleshooting I did run Windows in safe mode with ONLY the "ATI Catalyst" and "AMD External Events utility" running on top of the basic services, in case a newly installed service was stealing hotplugging messages, but that didn't do anything. I've also gone exhaustively through my graphics driver settings to make sure everything there looks correct.
How do I successfully disable autorun in Windows 7 home edition 64 bit? I have read different instructions on how to do this and was needing the right one to do this
Not sure if "focus" is the right term here, but anyway. I use "list" view almost exclusively so this may not be an issue with other views. But one of my beefs with Windows 7 is: if you're viewing a folder that has multiple rows of files or sub folders; then you click on of the the folders that's more to the right of the window and the entire contents of the window reorients itself so what you clicked on is now more towards the left area of the window. Know what I'm saying?
Here's a before and after of what I'm talking about.. Open Window...
Now I click on a file that's slightly out of view and it does this without me touching the slider at all.....
AAM Updater plants itself in your Task Scheduler and your Startup to maintain this routine.Yet Adobe probably releases an update only every couple of months. If you try to delete those entries, the next time you start an Adobe Application, AAM Updater puts itself back into your Startup and Task scheduler.This stops it.[CODE]
If a window is moved above the screen so that parts are out of view, it is automatically resized to fit in view. Is there a way to disable this?
In Ease of Access Center, I checked "Prevent windows from being automatically arranged when moved to the edge of screen," but that only stops it from maximizing.
Is there any way to disable the taskbar popup when you hover your mouse over the edge of the screen with auto-hide on? I still want to have it appear when I press the Windows key, but have that hotspot area somehow disabled. I've tried the app by Prisoner, but that disables the whole taskbar, leaving only the orb.I need this for a Tablet PC i'm customising - I find that when I want to press controls near the edged of the screen, I hit that bloody hotspot area and get the taskbar instead of what I've been aming for. Also, disabling the taskbar completely would not work, since I need the notification icons (battery meter etc.). The tablet has a dedicated Windows button... and nothing else in the way of physical controls.
I've looked absolutely everywhere I can think of and I can't find a way to disable auto-joining unknown networks. There has to be a way to do it, otherwise that would be a huge security flaw. When in range of my own router or any other access point I have saved, it's fine. However, When I take my laptop elsewhere, it automatically joins unprotected networks, which I don't want to happen
I just bought a New Asus x54c notebook, There are some problems i m encountering 1st: my synaptics pointing device driver is automatically disabled at startup .I have to manually start it from Devices and Printers<Mouse Settings. After that it completely works fine. When i bought the laptop it was working fine ,maybe CCleaner did something , i double checked the startup items, its enabled. I checked at MSCONFIG too ..enabled. Cant find anyhting wat to do.
I found this solution for this annoying problem, which is, disabling autorun. Disable Scan and Fix for Removable Drives in Windows - How-To GeekI am looking for a way to disable this prompt, without disabling autorun. Is it possible, or is it an integral part of the autorun?
I am running Windows 7 Ultimate on HP Pavilion DV2000 laptop.I found that some DVD's won't play on the machine. In My Computer folder, the F: drive does not change even if I insert a DVD. There is no issue about playing CDs and some DVDs. I found that the DVDs which refuse to get detected are mostly commercial DVDs.Is it an issue about DVD region?The drive is 'hl-dt-st dvdram gsa-t20l ata' and it was by default coded to Region 2 (though I live in Region 5 - India). I tried to change the region but I was not successful. I then installed region killer and now the default region is region 5. However, even this has failed to detect the DVD.
so I have a new computer with Windows 7. I want to know the best way to delete junk files etc. automatically each time I boot up. I used Ccleaner on XP and I'd like to know if there is an alternative.
I don't know the best place to post this so please advise me if its in the wrong place. I ran an analysis on my laptop for defrag using auslogics as I haven't done one in a year and it also told me that I had junk files and registry errors etc that I needed to get rid of before defragging. I've run Ccleaner, Glary utilities and advanced systemcare free and it still tells me there are files/errors to get rid of. I don't really want to buy a program atm just to get rid of these if theres a perfectly good free program I can use - does anyone know of anything else other than the ones mentioned that will clear this up? Is it essential that I do
but i have my own domain and i find (mainly with hotmail) that all my emails keep going into junk folders, now ikno how to stop it from the other end, but any tips, or anything i can do to stop them going there in the first place??i have a signatures that has a small image in there, and i would imagine it would be keyword triggered, but i need to find a way to minimise or somehow stop my emails going into junk
All my mail has been going to the Delete and Junk box Instead of Inbox (For some reason my Seven activation did`nt it went to Inbox.)running Win. 7 and had a Android tablet connected to my mail address and a Gmail account. All sorts of problems occurred so removed both of these but the direction straight to Deleted box continues. I can move mail from Deleted to Inbox but this is only with.current mail in Del. box.
I original bought 4x2g of these:[URL]- G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model F2-8500CL6D-4GBNQ They are rated 6-6-6-18 with a Cas Latency of 6, also have a speed of DDR2 1066 (PC2 8500)Now since I only need to replace 1 stick, I figured try to get the same exact stick, but it seems they dont sell the exact ones any more.So I was going to get this single 2g stick of G.Skill's: [URL]- G.SKILL 2GB 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Desktop Memory Model F2-6400CL5S-2GBPQBut it seems to be rated a bit slower?5-5-5-15, lower voltage, a Cas Latency of 5 & its speed is DDR2 800 (PC2 6400)Will this limit the computers ability to really perform at it's highest possible rate of 8g if the 4th stick is slower like that?
the hi/fi works fine. looks like I need to put it back to the original self. When you open the email, it goes right to junk, then freezes. when you open internet explorer, it will also freeze. Not sure where to go on start for original setup
i want to say that i do not want any detection indication in my pc.i m using window 7 and it causes a problem in detection of usb pendrives and ipod.so i want to remove the detection of usb from my system.can further it will help me in using pendrive and ipod?
I recently took my internal hard drive and bought a casing for it and made it external. But when i connected it to my computer the disk management showed it as invalid dynamic. So i went online, read a bit about basic and dynamic and ways to convert the latter into former. I adopted the method of converting through changing "hex" using "HxD". Now when i changed the '47's to '07' , i got back my three partitions without any data loss one of which was system reserve. I do not know how to get the rest back. cannot loose the data. I have to get the other three back. Total no of partition =6 (including system reserve) No. of partitions recovered = 3 (including system reserve) No
I have a user who tells me she deleted her Junk Mail folder from Outlook 2007. She has two e-mail profiles and claims it is missing from both. I won't have access to the computer for a day or so, but I wanted to find a solution beforehand.
I assumed it would be as simple as going to Deleted Items and restoring the folder...but from what I've been reading, that isn't the case, and she shouldn't have been able to delete the folder in the first place.
So the question is in the title. Outlook 2013 gives me notifications about newly received junk mail which I don't want to see. Can I somehow disable that feature and let it notify me just when regular email is received?
I use sometimes outlook to retrieve my emails but all spam email are also fetched, even after I mark them as Junk email in outlook. So I am wondering why the filter antispam in outlook (junk mail blocker) is not efficient?
I use my home network to stream music and movies from my computers to my Xbox and TV. Now all of a sudden, nothing. Both computers are running Windows 7 Ultimate x64, connected online through wifi, and connected to the network homegroup (that works without any issues), but neither or them detect any of my media devices. I have a Sony Viera ST30 TV and an Xbox 360, both having wired connections to the same network that the computers are on. Features that require the internet on both work perfectly fine. And I have a viera app on my phone that I used to use to control my tv (the app may not be compatible with my phone). Even having sharing enabled on the computers, they just wont detect my TV or my Xbox. If I connect my laptop to the network via wired connection, my devices are found. If I connect to a friend's wireless network, their devices are found as well. There has been no change on either computer from the last time it was working, till now.
