Runs Out Of Memory, Cant Open New Tabs And Touchpad Does Not React
Mar 23, 2008
When I surf with IE7 og have more than 7 tabs open at the same time, its like windows runs out of memory, all of a sudden I cant open any new tabs and right click on the touchpad does not react. If I then minimize IE7 and right click on the desktop nothing happens either. If I then close a couple of programs (its only Yahoo messenger og coreTemp that are running(coreTemp shows how warm your cpu is, and min is constantly between 56 og 64 degrees celsius)), then right click works again.
Usually when this happens I cant even get the taskmanager up, but if I close Yahoo Messenger then I can, and now I can see that there is used about 47% memory, under proceses i can see that:
Yahoo uses up to 50MB,
Iexplorer 27 - 150MB
og Dwm.exe takes up to 120MB.
The problem also happens if Yahoo is not started, so thats not the cause. I have disabled aero and use minimal of all the things Vista comes with, so the I get max. performance following most of the instructions but the probleme persist every time I use IE and use more than 7 tabs (This should not happen, and using more than 7 tabs is perfectly normal)............
View 7 Replies
ADVERTISEMENT
Feb 12, 2009
Minor issue, but annoying Vista Home Premium, IE7. When I open a new tab I get the Blank Tab page. I have checked the Internet Tools item for Open Home Page instead of a Blank page, but no joy. How can I get a new tab to open to my home page.
View 9 Replies
View Related
Oct 6, 2009
I had my IE7 configured to open several pages (tabs) when it starts up and everything was working fine until this morning, when IE8 keeps crashing repeatedly. This is the detail of the error reported by IE:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 8.0.6001.18813
Application Timestamp: 4a6621ae
Fault Module Name: BhoCitUS.dll
Fault Module Version: 3.7.2.0
Fault Module Timestamp: 47596c0a
Exception Code: c0000005
Exception Offset: 000046e7
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
I am posting it to the Vista newsgroup since I suspect this is a Vista problem rather than an IE problem; let me know if that is not the case.
View 5 Replies
View Related
Nov 3, 2009
i have a NVIDIA GeForce 6150 LE and running Vista Pro 32 Its been 3 weeks i lost the color red. Mind you it came and went a few times. Also in the NVIDIA control panel i can adjust the other colors but red doesnt react. I have tried many drivers and still no fix.
View 8 Replies
View Related
Apr 3, 2009
We are wondering if he should go with the 64bit software so he is open to more memory upgrades? If so should we do xp pro or vista business. Also is the T9400 suitable. I do not really trust the opinion of a customer service rep.
View 9 Replies
View Related
Apr 11, 2008
I just started using Windows Mail today and haven't used much memory but when I click on the "create mail" tab to write a new email it gives an error message saying it cannot open the window because there is not enough memory.
View 4 Replies
View Related
Dec 15, 2008
Is it possible to get IE8 (b2) to remember the tabs you had open in your last session?
View 4 Replies
View Related
Feb 26, 2009
after spending almost 30 min (yeah yeah I'm a newb or whatever you call people like me these days) trying to figure out how I can preview the tabs as thumbnails when I scroll my mouse over the task bar, I see that IF you have Vista Home Premium or better, you can change your Color and Appearance to Aero and then supposedly the option (under the Taskbar and Menu section in the Control Panel) for previewing tabs as thumbnails is supposed to be click-able... I have Windows Vista Home Premium, AMD Turion(tm) 64 X2 Mobile Technology TL-56, etc. ... I tried to change the color to Aero and it won't let me, so of course it won't let me preview the tabs as thumbnails either.
View 4 Replies
View Related
Jun 10, 2008
The tabs open at the bottom of the screen, how do I change the location to the top of the screen?
View 9 Replies
View Related
May 31, 2008
A few days ago I set my home page tabs with no problem. Today I decided to add two tabs. Nothing works. I've even tried adding them via IP's. I've clicked on each tab, added the desired webpage, selected Add or Change Home Page and then checked "use the current tab set as your home page." I've also tried all other options. Only the original page is retained. What am I doing wrong? (Date/Time are correct and open new tabs next to current is checked in IE Properties.)
View 5 Replies
View Related
May 31, 2008
I set my home page tabs with no problem. Today I decided to add two tabs. Nothing works. I've even tried adding them via IP's. I've clicked on each tab, added the desired webpage, selected Add or Change Home Page and then checked "use the current tab set as your home page." I've also tried all other options. Only the original page is retained. What am I doing wrong?
View 6 Replies
View Related
Mar 3, 2008
The strangest thing has happened in my excel 2007, running in vista 64. As of yesterday, it no longer displays the individual tabs for worksheets in a workbook of existing files. Any new blank file it will show the standard three tabs. Its not a problem with the file which when viewed in vista 32 or xp still shows the tabs. I've searched the ms knowledgebase and the web, but this appears to be a one of a kind. The "unhide" worksheet feature is greyed out in excel.
View 6 Replies
View Related
Mar 31, 2009
I have a dell inspiron 1525 and I have no idea how to turn the touchpad on it off
View 9 Replies
View Related
Nov 5, 2009
over the last couple of weeks Internet Explorer has decided to stop responding. Is this a general problem or am I the only one? I don't seem to be doing anything unusual when it happens. Sometimes simply switching tabs causes the freeze.
View 6 Replies
View Related
Jun 22, 2008
I turn on my computer today, and all of a sudden the minimized tabs for the programs I'm using are on the wrong side of the taskbar. They're on the right side, near the clock, rather than the left side by the start menu. They are also so small that I cannot read them, and if I have more than two they don't show up. I know it's a minor problem, but it's really annoying to me, and I can't figure out how to make them go to the way they were before.
View 4 Replies
View Related
Mar 29, 2008
Tools/Internet Options/General tab, click on Tab settings and re-enable this feature. If it is enabled already, uncheck the box, click apply/ok and then close all open browsers. Repeat to re-enable this feature.
View 4 Replies
View Related
Jan 24, 2009
Does anybody have a tip where I can find free Synaptics Touchpad Drive downloads. I have 7.0 and overnight it froze on me. I have only recently bought my laptop and it came with Vista which I have been hating and now this latest problem occured.
View 9 Replies
View Related
Sep 22, 2009
Can anyone help me turn it off? Or, at least the function that simply reads me tapping it accidentally as a request to move the mouse? When I type - it's annoying.
View 9 Replies
View Related
May 4, 2008
I have a Toshiba Satellite A100-033 running Vista Home Basic. I mostly use the laptop as a desk top replacement and, as I dislike using the touchpad, I disabled it, and instead I use an external mouse via one of the USB ports. On my laptop the standard way to disable the touchpad is by simultaneously pressing the Fn key and the F9 key. However, to be honest, I am not sure whether I did in fact disable the touchpad by this means, or whether I used some other means (if it was by some other means then I have forgotten what this was). Recently I wished to re-enable the touchpad so that I could use the laptop outside the house without having to take my external mouse with me as well. However, I found that pressing Fn + F9 did not re-enable the touchpad and I now can't use the touchpad at all.
If I go into mouse properties (in control panel), this tells me that my synaptics pointing device is enabled. If I go into device manager and look at "mice", I am told that my touchpad is working properly. All this makes me suspect that the problem is not a hardware fault but that I have altered some setting, with the result that my touchpad is permanently disabled until I change the setting back to its original state.
View 9 Replies
View Related
Feb 4, 2010
I deleted both the upper and lower filters, the restarted my computer. The drive worked like new, except my keyboard and touchpad and volume keys wouldn't. My external mouse works, and i can "type" using an on-screen keyboard, which is unacceptable. And, for whatever reason, my internet doesn't work. I double click on the icons and nothing happens, though at the status bar below it says i have a signal.
I called up Geek Squad which I should have done first, and the guy there said that I'd deleted the keyboard's 'keys' which I'm assuming is some sort of programming from the register. He said that I could either re-install windows or look online for the correct keys and reinstall them, which sounds WAY easier than reinstalling windows. I have no idea how to do that, and don't want to screw up my computer any more than it already is.
View 5 Replies
View Related
Jan 24, 2009
I can't use my touchpad. My arrow/cursor is frozen in the middle of the screen.
1) I can still use external mouse
2) I saw in similar post somebody suggested using memory tool scan from microsoft. I did find that but when I clicked on it the owner was not microsoft but some other name. I am tired of downloding stuff on my computer and find out later that they are spyware etc..
3) I purchased Norton 360 which does not help
4) I ran system restore, did not help. First when I ran system restore it gave me error message "unspecified error during system restore" I ran it in safemode and now I could restore. Then I had to do the updates again. Rebooted toshiba laptop agai and the cursor still frozen
View 8 Replies
View Related
Jul 8, 2009
i have an HP Notebook with a Vista Home Premium 32bit OS. I can't do a mouse click, directly on the touchpad. The Synaptics Touchpad V6.5 is installed. II tried to download a newer version of the synaptics, but the system told me that the installed version is newer.
View 5 Replies
View Related
Dec 29, 2008
Not really sure what genre this problem should be on. However i have recently purchased a Fujitsu Siemens Amilo Li2727 notebook. Working fine when i got it but i decided to use a usb mouse instead of touchpad now the touchpad has stopped working entirely even when usb mouse id plugged out. i really want to resolve the problem. i have already gone onto control panal, mouse but the touchpad does not come up as a device.
View 5 Replies
View Related
Mar 25, 2009
i don't find this on the i'net after a month on google so i'll post here. it seems the alps drivers do not fully support v.x64. doesn't have the disable button anywhere. today vaio help (tier 3, supposedly) finally told me the above which i told there tier 2 a week ago, i guess he didn't read the notes. said i would have to live with it. they wouldn't help w/ registry hack. probably means they didn't know it. bad, bad, bad sony. anyway, to the chase. i saw where linux people could use synaptics drivers. tried the same trick w/ v.x64. there was the button under start>control panel>mousec>device settings>disable. those penguins aren't so bad. i have a severe neurological disease and that touchpad rendered a $1200.00 computer unuseable. sony's response was "live with it." to quote my favorite tech authorities, the three stooges, "chowderheads." let me reiterate "bad sony, bad sony." Drivers | Synaptics v.10.1.8 worked for me on win vista home premium x4, sp1/vaio vgn-fw170j.
View 0 Replies
View Related
May 11, 2008
I am using vista home premium on a laptop with a touchpad. I am trying to find a way to use the touchpad to enter chinese characters. how to set this up. I have essentially zero knowledge in all this - how to use the keyboard to enter chinese
View 8 Replies
View Related
Jun 1, 2008
I have an new Acer Laptop with Vista Home premium. It has an ALPS touchpad. I want to disable the touchpad (and enable it w/ USB mouse on rare occasions where I might use the touchpad). I went to the control panel and mouse properties and there is no way to disable it there. I also went to the device driver area and the disable device was greyed out. How do I disable this touchpad?
View 5 Replies
View Related
Apr 23, 2008
I have an Acer Aspire 5100. Mostly it works good with Vista Home Premium w/updates except the new SP1. Sometime ago the touchpad quit working and I just lived with it until today when I had a little time to investigate. In Device Manager it says the device is working properly. It also say its a touchpad on PS/2 port using IRQ12. I downloaded the latest driver suite from syaptics.com (5.2MB for the Vista 32 bit version) and ran it after disabling the device, enabling the device, uninstalling the current driver, restarting and having Vista reinstall the old drivers with no luck.
However, after running the new driver suite (an .exe file) and restarting Vista, the device showed disabled. When I enabled it - the touchpad worked momentarily (about 5 or 6 seconds). Every time I disable or enable it, it responds and works for about 5 or six seconds and then quits. No option to change the port or IRQ setting as they are 'grayed out'.
View 4 Replies
View Related
Apr 17, 2009
Why is is so that ever since I have been running Vista Ultimate my HDD led runs almost non stop. I have disabled Superfetch, Indexing and Defrag just to name a few in a vain attempt to track down why this happens. It appears to be normal with some but not all Vista installations. Before Vista came along this sort of activity would ring alarm bells. The System and Performance monitor shows it is updating system files but why does it need to do it 100% of the time. Hard drives are NOT built with a 100% duty cycle in mind. I need some knowledgable person who knows the complete answer to this problem.
View 5 Replies
View Related
Apr 13, 2008
I've just started using the sleep mode and everything appears to shutdown but the fan runs continually. From what I understand this probably means something is accessing the CPU, but what?
View 5 Replies
View Related
Feb 18, 2009
a while ago a program was installed with window update. The application presented a window for handwriting. maybe Vista thought my Desktop computer was a handheld device? well i disabled that application and ever since it was installed, my touchpad (which is integrated with my keyboard and has its own PS2 plug) does not work. It does show up in a list of devices though saying 'functionin properly'
View 5 Replies
View Related
Sep 14, 2009
I am having issues with Direct x 10, everytime i try to run a game.exe it runs in Direct x 9.0c, now ive downloaded the latest forceware drivers for my card, tried to run it in administrator mode and everytime i right click a game.exe vista does not show run in direct x 9 or 10.exe's. I have also tried to clean my graphics card drivers in safe mode, downloading EVGA drivers afterwards, this still does not work. In dxdiag it also says im running in Direct x 10.
I have a question, i installed a 32 bit ver of windows on the system by mistake then formatted the HDD and installed vista 64x would this have anything to do with the issue im having? (most of my files are moved to program files x86). Oh and one more crucial thing, ive tried to update Direct X 10 on their website, the update just installs 9.0c because im on sp1, i have also tried to update to sp2, the same problems occurred, did a fresh format back onto SP1.
View 9 Replies
View Related