Minor issue, but annoying Vista Home Premium, IE7. When I open a new tab I get the Blank Tab page. I have checked the Internet Tools item for Open Home Page instead of a Blank page, but no joy. How can I get a new tab to open to my home page.
I had my IE7 configured to open several pages (tabs) when it starts up and everything was working fine until this morning, when IE8 keeps crashing repeatedly. This is the detail of the error reported by IE:
Problem signature: Problem Event Name: APPCRASH Application Name: iexplore.exe Application Version: 8.0.6001.18813 Application Timestamp: 4a6621ae Fault Module Name: BhoCitUS.dll Fault Module Version: 3.7.2.0 Fault Module Timestamp: 47596c0a Exception Code: c0000005 Exception Offset: 000046e7 OS Version: 6.0.6002.2.2.0.768.3 Locale ID: 1033 Additional Information 1: fd00 Additional Information 2: ea6f5fe8924aaa756324d57f87834160 Additional Information 3: fd00 Additional Information 4: ea6f5fe8924aaa756324d57f87834160
I am posting it to the Vista newsgroup since I suspect this is a Vista problem rather than an IE problem; let me know if that is not the case.
When I surf with IE7 og have more than 7 tabs open at the same time, its like windows runs out of memory, all of a sudden I cant open any new tabs and right click on the touchpad does not react. If I then minimize IE7 and right click on the desktop nothing happens either. If I then close a couple of programs (its only Yahoo messenger og coreTemp that are running(coreTemp shows how warm your cpu is, and min is constantly between 56 og 64 degrees celsius)), then right click works again.
Usually when this happens I cant even get the taskmanager up, but if I close Yahoo Messenger then I can, and now I can see that there is used about 47% memory, under proceses i can see that:
Yahoo uses up to 50MB, Iexplorer 27 - 150MB og Dwm.exe takes up to 120MB.
The problem also happens if Yahoo is not started, so thats not the cause. I have disabled aero and use minimal of all the things Vista comes with, so the I get max. performance following most of the instructions but the probleme persist every time I use IE and use more than 7 tabs (This should not happen, and using more than 7 tabs is perfectly normal)............
This has just started last night and I have no idea on what to do..any folder I open is just blank, computer,network, control panel, etc all open up blank.
I open up window update it opens up with a blank explorer window. it stays open till i force it to close with windows task manager. it forces it to close while restarting my entire explorer at the same time, and it closes out some programs sometimes when it does it too.
When reading an email using Windows Mail,if the text in the body of that email contains an email address,is it possible to double click on that address and have Windows Mail open automatically with a blank reply page?
This operation used to work OK with XP & OE however using Vista & Windows Mail it only pops up a message stating that the program is not associated. Clicking on an email address in a web page using IE8 works fine, it opens up a Windows Mail reply page.
after spending almost 30 min (yeah yeah I'm a newb or whatever you call people like me these days) trying to figure out how I can preview the tabs as thumbnails when I scroll my mouse over the task bar, I see that IF you have Vista Home Premium or better, you can change your Color and Appearance to Aero and then supposedly the option (under the Taskbar and Menu section in the Control Panel) for previewing tabs as thumbnails is supposed to be click-able... I have Windows Vista Home Premium, AMD Turion(tm) 64 X2 Mobile Technology TL-56, etc. ... I tried to change the color to Aero and it won't let me, so of course it won't let me preview the tabs as thumbnails either.
A few days ago I set my home page tabs with no problem. Today I decided to add two tabs. Nothing works. I've even tried adding them via IP's. I've clicked on each tab, added the desired webpage, selected Add or Change Home Page and then checked "use the current tab set as your home page." I've also tried all other options. Only the original page is retained. What am I doing wrong? (Date/Time are correct and open new tabs next to current is checked in IE Properties.)
I set my home page tabs with no problem. Today I decided to add two tabs. Nothing works. I've even tried adding them via IP's. I've clicked on each tab, added the desired webpage, selected Add or Change Home Page and then checked "use the current tab set as your home page." I've also tried all other options. Only the original page is retained. What am I doing wrong?
The strangest thing has happened in my excel 2007, running in vista 64. As of yesterday, it no longer displays the individual tabs for worksheets in a workbook of existing files. Any new blank file it will show the standard three tabs. Its not a problem with the file which when viewed in vista 32 or xp still shows the tabs. I've searched the ms knowledgebase and the web, but this appears to be a one of a kind. The "unhide" worksheet feature is greyed out in excel.
over the last couple of weeks Internet Explorer has decided to stop responding. Is this a general problem or am I the only one? I don't seem to be doing anything unusual when it happens. Sometimes simply switching tabs causes the freeze.
I turn on my computer today, and all of a sudden the minimized tabs for the programs I'm using are on the wrong side of the taskbar. They're on the right side, near the clock, rather than the left side by the start menu. They are also so small that I cannot read them, and if I have more than two they don't show up. I know it's a minor problem, but it's really annoying to me, and I can't figure out how to make them go to the way they were before.
Tools/Internet Options/General tab, click on Tab settings and re-enable this feature. If it is enabled already, uncheck the box, click apply/ok and then close all open browsers. Repeat to re-enable this feature.
im unable to burn music from my laptop, i have vista basic and until now ive had no problems. I insert a blank cd and it auto loads, then it asks to format before continueing, i click yes, it formats then right at the end it says unable to finish formatting and opens the cd. I then try to burn onto it and the cd stays blank.
I've been trying to burn an audio CD on my computer (i've only had this computer for a few months and this is the first time I've tried burning any kind of disc), and when I put the CD in and hit burn it says that my cd is not blank, I tried a handful of blank cds and it spit them all back out at me saying it's not blank. Just to make sure, I opened my computer and looked at the disc there and it WAS blank, so I don't know what to do.
This is my second monitor,that has done this,i have just had it replaced under warranty,its better but the problem is still there,when i use a HDMI to DVI cable the screen keeps going blank,and when i use VGA cable the screen stays on but is fuzzy.
I have a quad boot system with xp,vista32 and vista 64,all with different drivers for my 2 gtx260's,one of them has no display driver and it is still fuzzy.
I've tried two monitors,3 cables,many graphix drivers,and swapping my gtx260's around but no go.
The only thing i can think of is maybe interferance,but i've owned this system for two years and this is a fairly new problem.
I need help. When I insert any non blank homemade cd Vista can't read it and wants to format it. Happens with Autoplay or when I use Windows explorer. Does not matter what is on the cd: music, pictures, data files, etc. The cds work fine in any other pc. If I insert a store bought or commercial made cd, no problems. Only have a problem with homemade ones. The drive is a Mat****a DVD-RAM UJ-850s.
I've done the following: 1. Uninstalled the driver and reinstalled it. 2. Added "NoCDBurning" to the registry (possible fix found on other forums)
I would like to start doing video, on my computer, and I know nothing about it.Right now, what I am trying is to copy an old (8mm film - no sound) home movie that is on a DVD -- to my hard drive -- then burn it onto a blank DVD so that I can have a 2nd copy. I am asking for step by step help as to how to do this. What I've tried on my own hasn't worked. I have a vista laptop about 6 months old, 2GB ram, Duo core.
Prior to SP1, the RAM usage was always at about 90-95% and the CPU usage seemed to be quite a lot. After SP1, RAM usage seems to be down to about 70% and the CPU usage is a lot less. Before SP1, IE used to take a while to load a new blank tab, and to exit with a number of tabs open. After SP1, new blank tabs load almost instantaneously, and exiting seems to be very much more snappy. Office applications also seem to load much more quickly. The C: drive prior to SP1 had 19.1 GB free out of 37 - after SP1 it now has 22.1 GB free.
i have always got mail fine and just a couple days ago I started getting email with the body of the letter being blank. So i sent myself emails from another email account i setup and sure enough the title of the email shows up, but the body of the letter is always blank.
I can connect my laptop to my computer and get sound and video with absolutely no problem. Where I run into my issue: When it's connected, the TV turn into the monitor and my laptop goes blank. (I believe I selected this option not knowing what the outcome would be when my windows vista laptop was connected to the TV for the very first time). I absolutely dislike that I have to work all my functions through my TV and would like my laptop monitor to display a screen at the same time. Is that possible to undo what I caused?
I read somewhere that if you go to the Power Options, advanced options, processor power management, and change the value of the minimum processor state to 100%."
When I attempt to sign in to Communities I get the following message: Cannot find 'about:blank'. Make sure the path or internet address is correct. Eventually I cancel this message and then find I am connected.
I had 2.5GB of RAM in HP laptop. OS - vista home premium service pack2.
The system works fine.
I upgraded to 4GB RAM(2*2GB). when upgraded to 4GB in bios able to see as ~3.33GB of RAM. I am able to see microsoft progress bar also, but after that the screen is blank and able to hear windows logon sound but no display. The screen is black.
When installed only the new 2GB of RAM the system work fine. So no problem with the new 2GB also. But with 4GB the screen is blank. I have nvidia GeForce 7400 graphics card. Is there any configuration need to be done in vista before installing 4GB of RAM?
Vista Home Premium. I have no third-party CD/DVD recording software on the machine. Every time I go to burn files to a CDR, CDRW, DVD R or DVDRW using the Windows burning function it wants to format the disk. If I cancel the format, then the burn is not proceeded with. XP does not do this. How do I stop this infuriating behaviour?
i was wondering is it possible to change your computer to name to *Blank* because I tried it and it's just not possible. I like it to set it to blank because I like it blank,
When I click on the "email" option in Windows Photo Gallery I'm given the "size" option, I click on "attach" and then I'm sent to a blank page whose tab reads, http://compose...cldefstat=Def1. I am not directed to an email address box.