We are wondering if he should go with the 64bit software so he is open to more memory upgrades? If so should we do xp pro or vista business. Also is the T9400 suitable. I do not really trust the opinion of a customer service rep.
View 9 RepliesI just started using Windows Mail today and haven't used much memory but when I click on the "create mail" tab to write a new email it gives an error message saying it cannot open the window because there is not enough memory.
View 4 Replies View RelatedQuite a few of my XP clients have requested upgrades to Vista in the last few days. They have been reading that their XP support and updates will cease in the near future and are suddenly waking up to the fact that Vista is now 'cheaper'.It is as if Vista is brand new again. Nevermind that Windows 7 is lurking on the horizon. Anybody else found this or thinking this way?
View 9 Replies View RelatedVista Home Edition and no upgrades like SP1 or 2 This is on a laptop, ACER, with 512 of RAM He removed the files from his "D" which was his recovery area. He did not make recovery disks. He put pictures from the internet on "D". I don't know.
His computer is VERY slow. When I start IE6 it is about 6 minutes before it will open on the screen. I am thinking more RAM so I ordered 1GB more. If that doesn't help can I make a complete install of Windows XP from a disk I received with another computer?
I have been saying I was going to do it, so now I have! I ordered these components from Newegg 12 June (yesterday). Today I received conformation that the order was packed and tracking numbers were issued, shipping from two different origins. EVGA 1GB 9600GT - OCZ 700W PSU - HANNS-G 22" LCD Monitor to go with my 47" 1920x1080P Monitor/TV The monitor will be here Tuesday the GFX Card & PSU will be here Wednesday! I would really like to install the PSU myself;
View 9 Replies View RelatedWhen I surf with IE7 og have more than 7 tabs open at the same time, its like windows runs out of memory, all of a sudden I cant open any new tabs and right click on the touchpad does not react. If I then minimize IE7 and right click on the desktop nothing happens either. If I then close a couple of programs (its only Yahoo messenger og coreTemp that are running(coreTemp shows how warm your cpu is, and min is constantly between 56 og 64 degrees celsius)), then right click works again.
Usually when this happens I cant even get the taskmanager up, but if I close Yahoo Messenger then I can, and now I can see that there is used about 47% memory, under proceses i can see that:
Yahoo uses up to 50MB,
Iexplorer 27 - 150MB
og Dwm.exe takes up to 120MB.
The problem also happens if Yahoo is not started, so thats not the cause. I have disabled aero and use minimal of all the things Vista comes with, so the I get max. performance following most of the instructions but the probleme persist every time I use IE and use more than 7 tabs (This should not happen, and using more than 7 tabs is perfectly normal)............
I've upgraded to 6 gb of ram from an original of 3gb. Regardless if Vista (32) bit will display this on the OS properties page or not does this improve my systems performance ? Is my system using this additional RAM or is it just idle? I did that systems check for optimal performance and the score was 5.0. No I am not computer savy that I'm sure that is obvious. Is there a fix to work around where the OS will display the actual memory available?
View 9 Replies View RelatedI want to upgrade my Dell Dimension E520.
my current specs are:
Intel Pentium D 925
4Gb RAM
Nvidia 7300LE 256mb
750Gb HD
Windows Vista Home Premium 32bit
Components that I am going to buy:
Nvidia 9500GT 1gb
Intel Core 2 Duo 7600
Creative X-Fi Xtreme Audio PCI Express
Windows Vista Ultimate 64bit
Memory DiagnosticsIf Vista detects a memory problem in your system such as a faulty RAM module, it will display a notification asking if you want Vista to try to diagnose the problem.Then again you may also recieve the sudden BSOD with the error MEMORY MANAGMENT at the top. You can manually run this tool anytime just typememory in the search box inside the start menu.This tool offers you two options: restarting immediately and checking for problems, or running next time you reboot your machine (the memory diagnostic tool must run at boot time).
Network DiagnosticsWindows Vista also allows you to check the connectivity of your network connection using the Network Diagnostics Framework: An infrastructure and a set of built-in and extensible components that attempts to automatically diagnose and correct network connectivity problems. The usual way to run this check is to open Network Center and click the Diagnose Internet Connection link on the left Vista will either identify ............
I had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit, but the available memory shown in the system is still 3.3 GB. Why is this and is there a way to make the full 4GB available? It's possible that my video card is using RAM instead of its own RAM. If I install a video card with its own RAM, will the full 4GB be available?
View 9 Replies View RelatedI have a problem with Vista Ultimate x64 SP1, I always seem to lose all my free RAM within an hour regardless of system activity, even while idling. I have noticed an svchost.eve process runs each time I reboot which seems to bloat constantly although when I close it down it only frees up about 800MB, what's happening to the rest of my 8GB??? When I launch Task Manager it says I'm only using 10% Memory but free RAM sits at 0?!?!
View 9 Replies View RelatedI had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked on usenet and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit (I did clean install of course), but the available memory shown in the system is still 3.3 GB. This is show in both task manager under performance->Physical memory->total, and 'property of My Computer'->Installed memory (4GB/3.3 GB usable)........
View 7 Replies View RelatedI am fairly new to the forums, and VERY new to Vista x64. The machine is new, and I was trying out some apps and games, I was in Secondlife when I got an error messege saying I was out of memory and needed to free up memory. I shut down the app and restarted it. Runs but I watched Task manager and saw my free memory down to almost nothing after an hour or so. The cached seems very high.
I did alittle research and decided to set a second page file on my 1TB hard drive, (OS is on the other HHD's )( regulated by system for size ) I'm not really sure whats going on. Example of just task manager and this page openis attached. Again, any help would be great in getting the memory set up on here optimal.
I have 6gigs of DDR3 memory at 1600hz. Running on Vista 64bit and every now and again my memory performance just maxes out. The problem can occur around the time when I am installing something but I dont think its always this way. I have read forums where it could be the hardrives performing self diagnostics. I have all the latest patches for vista.
View 7 Replies View RelatedI'm running Vista 64 Home (SP1) Premium on a homebuilt machine w/8GB (4 X 2GB modules). Windows is reporting 8 GB of Installed Physical Memory but is reporting only 4 GB of Total Physical Memory. I first noticed this when, after installing a game, the game system specs said 3092 MB of RAM.
I have checked the BIOS and it recognizes 8 GB. Memory Remapping is Enabled. Under Memory Remapping is "PCI MMIO Allocation: 4GB to 3328 MB" (?). MSConfig Boot Options shows Max Memory is not checked and no value in the box below. I tried enabling it and using 8192 as the value, but it made no difference. DxDiag shows 8 GB installed RAM. how I can get windows to make available all 8 GB of RAM? (Motherboard is ASUS Maximus II Extreme w/Intel Q9550 processor running at Q9650 clock speed, memory running at 1127 MHz
Using Vista Home Premium with SP1. I cannot open a .dat file and cannot set an association to open it because .dat is not listed in the Set Association menu. How do I get .dat listed so that I can set an association to it?
View 9 Replies View RelatedOutlook 2007 installed,and working fine. I needed to open winmail and found that it did not open. Found it running in taskman, but there is no winmail program window available.
I have tried:
1)delete winmail reg entries
2)delete winmail storage folders
3)rename winmail.exe file....
None of the above worked. Specifically, the results of points above:
1)started winmail after deleting reg entries,just remade them,is all.
2)ditto for point 2
3)nothing happens when double click renamed winmail.exe...
I dont want to use another program. I needed to visually advise someone about adding signatures,but winmail did not start. Yes I could do an internet search, but that is not the point-winmail is broken somehow and I wish to fix it.
When I boot up in the morning, I have to wait 20 to 30 mins before Outlook 07 will connect to my Exchange 2003 server. Until then, when I try to open Outlook it says, cannot open the default e-mail folders. And it suggests there is a network issue or that the Exchange server is down. These are not the case. The Exchange server is up and there are no network issues. I have many other computers attached to the network and none of them have this issue. Some our XP Pro/Office 07, some are XP Pro/Office 2003. The big difference with my machine is that it is Vista.
After about 20 to 30 minutes, wow! it connects! And then it's good for the rest of the day. I usually only minimize Outlook after I actually get it open so the connection is maintained throughout the day. I'm not sure what would happen if I closed it completely. But one thing is for sure, every morning, it takes 20 to 30 minutes before it will connect. Eventually, it always connects.
I have Vista Ultimate x64 Extreme, with 8 GB of memory, Q9300, and 2 velociraptors. I do NOT overclock, but would like Vista to use more of the memory. Typical load usage of memory is 2GB - about 25% of my total memory Maximum use of memory was 3GB - I would rather have Vista use memory than to use swap file. How can I get this done?
View 9 Replies View RelatedI have Vista Enterprise with 2gb of memory.
everytime i try to access a folder on my external hard drive (Toshiba 2.0 USB), it freezes explorer and and error message comes up saying out of memory, but i can't read it all because most of the window is just black.
also, before all of this started my NVidia graphics had a message pop up saying the NVIDIA Display Panel Extension cannot be created.
Possible reasons include:
Version mismatch. Reinstalling display drivers may solve this problem.
i've tried to download drivers but the only place to find them are on lenovo support and they didnt help
I am putting together a new build and since PC-6400 DDR2 is sooo cheap I thought I might consider 8GB on an X38 board. I already have 2x2GB dimms, and was guessing if I went to 8GB it might be nice to have 4 identical DIMMS, which are still available (ie, another 2x2gb of the pair I have now). Anyone have wisdom about this? My main uses NOW are MS Flight Simulator, Gigastudio, and both of those benefit from at least 3GB, beyond that I don't know. I don't forsee video editing.
View 9 Replies View RelatedDoes Vista SP1 recognise my 8gb physically or only as being installed?
View 9 Replies View RelatedWhy vista use alot of memory?
Even fresh install new PC with Vista 64bit and not install any
applications, still more that 1GB in used memory
I just got Vista this april for the first time Vista Ultimate 64 bit to be precise. It came with a new computer that has 4GB of Ram...which I thought would be plenty, but apparently not? Right now I have 4 programs running: Sony Vegas, Zune, Firefox and MS Word. Including all the background tasks like firewalls and all that good stuff, it says I'm using 2.65 GB memory. Ok I still have about 1.4 GB left right? Wrong...I have 12 MB?
2000 MB are cached. Whats up with that? Now Sony Vegas keeps crashing because I dont have enough ram and I cant open Windows media Player because I dont have enough ram....What happened to all my memory?
i have 4 gig of memory on my pc. i reinstall my vista. after the installation, my machine said that i only have 3gig. where is my remaining 1 gb (i put 4gb) on it. before i reinstall it my pc read my 4gb:o of RAM. but now 3gb only.
View 5 Replies View RelatedI've spent the last 2 weeks trying to confirm this. With Vista 32bit SP1, is it true that it will not only see the 4 gigs of ram installed, but use all 4 gigs as well? I've had gamers tell me that the OS will show the 4 gigs installed, but that was the only thing Sp1 did. It still can use only around 3.21 gigs.
I've also had system builders say that Vista 32bit SP1 will both show the 4 gigs, and use ALL 4 gigs. Both swear that they are right and the others don't know what they're talking about. I've built a new gaming rig and I have an OEM copy of Vista HP SP1 32 bit, and I want to be sure that I'm not wasting the 4 gigs I have installed, but I can't seem to get a consistent answer from everybody.
only controversy. Even two different MS MVP's gave me two different answers. I'm almost to the point of calling MS tech. support and asking for their best Vista tech. specialist to find out for sure. This is getting ridiculous.
I am currently running both Vista 64 and Vista 32 on two different drives and I notice that when booted, 64 uses almost 1.2 gig of RAM while 32 uses only about 800meg when booted. The only thing I have on 64 that I don't on 32 is iTunes and the Adobe CS3 suite. Is this normal? If so, why does 64 use more memory than 32? I do have superfetch on for both installs - could it be this that is using the extra memory - preloading iTunes/CS3 apps maybe?
View 5 Replies View RelatedI have a dell xps 600 that originally came with xp pro. 2.8 dual core and 1 gig memory. I was doing a lot of audio multi tracking and wanted to up my memory to help out with some latency problems I was having. the xps600 manual said that the mobo could handle 2 gig on 32bit and 8 gig on 64bit so I upgraded to vista ultimate and installed 8 gig. everything runs great and this solved my latency problems but there is one thing I noticed.
I use a G15 logitech keyboard which has a CPU and RAM monitor built into the LED window on the keyboard. This monitor tells me that I am usually using only 20% of my ram. Even when I am multitasking and using huge files, it never goes above 36% of ram usage. My pagefile is system managed and usually around 8.5gig at idle. Why isn't Vista utilizing more of my ram and is there a tweak
Alright with many games that I'm playing with. There are a few things that are going on that I'm not liking. Yes I know I play Gunz The Duel, and it seems like there is screen lag or something, maybe a delay, not sure what to call it. People were telling me about all the Services that Vista uses slows it down or such like that. Is that true? Or is there another way to fix it. I also play Crysis, and problem with that game, is that it isn't using all of my RAM or memory? It only uses so much, and just leaves the rest alone. Anyway way to make it use more? Also the game supports Dual processors. I have Quad, is there a way to make it use all four of them? Also just with any games, is there a way to just make the games run faster at all without killing the graphic, cause I know my PC can handle the graphics, it just seems like my PC isnt using everything that I put into it.
View 4 Replies View RelatedI'm pretty new to vista since I got my hp laptop(vista home premium x64)and I've noticed that it tends to eat up some memory. I opened up task manager before and i was using 31% after startup and after I open up a few applications and run for a bit it seems not to go much lower than 35%. Right now the only application I have running is firefox and I'm using 40%. granted there is processes running in the background such as hp stuff, anti-virus, and anti-spyware stuff along with rocketdock. but that stuff is also on after startup. Is vista always eating this much memory up like this for everyone? also, is there anyway to use less?
View 4 Replies View RelatedI have an HP Desktop Pavilion m8150n, Intel Core 2 Quad Q6600, Windows Vista Ultimate (32), 4GB RAM, 640GB hard drive, NVIDIA GeForce 8400GS. I have upgrade Vista with sp1. I have been having some problems with my pc hesitating when I'm clicking on things in a game. I have just recently upgraded my memory from 3 to 4GB, thinking this would solve my problem. It hasn't. When I go into the Task Manager, it shows Physical Memory (MB) Total 3581, Cached 2730 and only 56 Free. Is this my problem? I have a long list of processes and services running and I'm sure I don't need all of this running at the same time. This could also be causing my problem, but not sure. I have shut down some of these processes, but I'm not sure which ones I actually need to run the computer. This problem is extremely frustrating. I have 211GB free on my hard drive and the box is checked for Index drive for faster searching. I would be happy to provide any other information.
View 9 Replies View Related