Disable Alps Touchpad In Vista X64
Mar 25, 2009
i don't find this on the i'net after a month on google so i'll post here. it seems the alps drivers do not fully support v.x64. doesn't have the disable button anywhere. today vaio help (tier 3, supposedly) finally told me the above which i told there tier 2 a week ago, i guess he didn't read the notes. said i would have to live with it. they wouldn't help w/ registry hack. probably means they didn't know it. bad, bad, bad sony. anyway, to the chase. i saw where linux people could use synaptics drivers. tried the same trick w/ v.x64. there was the button under start>control panel>mousec>device settings>disable. those penguins aren't so bad. i have a severe neurological disease and that touchpad rendered a $1200.00 computer unuseable. sony's response was "live with it." to quote my favorite tech authorities, the three stooges, "chowderheads." let me reiterate "bad sony, bad sony." Drivers | Synaptics v.10.1.8 worked for me on win vista home premium x4, sp1/vaio vgn-fw170j.
View 0 Replies
ADVERTISEMENT
Jun 1, 2008
I have an new Acer Laptop with Vista Home premium. It has an ALPS touchpad. I want to disable the touchpad (and enable it w/ USB mouse on rare occasions where I might use the touchpad). I went to the control panel and mouse properties and there is no way to disable it there. I also went to the device driver area and the disable device was greyed out. How do I disable this touchpad?
View 5 Replies
View Related
Jul 29, 2009
It looks like this Every time I click something I get this dumb animated effect. How do I disable. Vista Ultimate x64
View 4 Replies
View Related
Dec 10, 2008
how to disable Perfmon in Vista? I do not need this and it takes to many resources.
View 5 Replies
View Related
Feb 7, 2010
ok to disable the superfetch in vista?,and will it make any difference to the system?,just that I keep getting error messages saying that it has stopped working,when browsing within firefox, so I might disable it??,any ideas?, I checked the error reports,
View 6 Replies
View Related
Aug 24, 2009
When I connect an iPod or a Western Digital external hard drive to my laptop,using a USB cable, I have to wait for a window to open asking whether I want to scan it or proceed without scanning. This can often take up to one minute to come up on the screen. As I am well aware of what I am doing, I would like to disable this Vista feature. I have already disabled UAC, but not this one. There is no doubt a simple answer, how to accomplish this. If you do respond, please tell me the full path to reach the target, as I do not consider myself to be an expert.
View 4 Replies
View Related
May 14, 2008
I want to disable ALL security on my Vista System. I don't want any passwords. I want every file visible/readable/writable/executable by ANYBODY who happens onto my network.
I don't want any firewalls. I don't want any antivirus. I don't want any automatic updates of any kind to anything. I don't want any popups asking for permission to do anything. I'd rather not have all the bloat and duplication in folders for different users. I want a single-user system and to be administrator of all things. Yes, I'll put some tiny subset of this back with third-party tools THAT I CONTROL. I've been poking around fixing up one issue after another...but it's a task. Is this info all in one place? Or better yet, a magic incantation to remove ALL of it in one fell swoop?
View 9 Replies
View Related
Mar 2, 2009
I am running Windows Vista Home premium 64 bit version... After I use windows update and then try to restart my computer..It will not start properly and goes blue screen and then into startup repair and then I have to use system restore to be able to start...when I disable my Mcafee Virus I can update my files with no problem..has anyone else run into this..
View 7 Replies
View Related
Mar 2, 2009
Just wondering why the reported Physical Memory in the Task Manager drops to 14%, after an hour or so, from 28% when initially starting the system. Processes drop from 49 to 46. Mainly Trustedinstaller and winupdate processes. I know some applications check for updates upon boot, but I kind of disabled most (if not all) of them except Vista updates. Also one of the many svchost.exe starts off with a reported Commit Size of 177K and later is down to 155K. This of course is not a problem. Just Vista64 curious!
View 3 Replies
View Related
Mar 31, 2009
I have a dell inspiron 1525 and I have no idea how to turn the touchpad on it off
View 9 Replies
View Related
Jan 24, 2009
Does anybody have a tip where I can find free Synaptics Touchpad Drive downloads. I have 7.0 and overnight it froze on me. I have only recently bought my laptop and it came with Vista which I have been hating and now this latest problem occured.
View 9 Replies
View Related
Sep 22, 2009
Can anyone help me turn it off? Or, at least the function that simply reads me tapping it accidentally as a request to move the mouse? When I type - it's annoying.
View 9 Replies
View Related
May 4, 2008
I have a Toshiba Satellite A100-033 running Vista Home Basic. I mostly use the laptop as a desk top replacement and, as I dislike using the touchpad, I disabled it, and instead I use an external mouse via one of the USB ports. On my laptop the standard way to disable the touchpad is by simultaneously pressing the Fn key and the F9 key. However, to be honest, I am not sure whether I did in fact disable the touchpad by this means, or whether I used some other means (if it was by some other means then I have forgotten what this was). Recently I wished to re-enable the touchpad so that I could use the laptop outside the house without having to take my external mouse with me as well. However, I found that pressing Fn + F9 did not re-enable the touchpad and I now can't use the touchpad at all.
If I go into mouse properties (in control panel), this tells me that my synaptics pointing device is enabled. If I go into device manager and look at "mice", I am told that my touchpad is working properly. All this makes me suspect that the problem is not a hardware fault but that I have altered some setting, with the result that my touchpad is permanently disabled until I change the setting back to its original state.
View 9 Replies
View Related
Feb 4, 2010
I deleted both the upper and lower filters, the restarted my computer. The drive worked like new, except my keyboard and touchpad and volume keys wouldn't. My external mouse works, and i can "type" using an on-screen keyboard, which is unacceptable. And, for whatever reason, my internet doesn't work. I double click on the icons and nothing happens, though at the status bar below it says i have a signal.
I called up Geek Squad which I should have done first, and the guy there said that I'd deleted the keyboard's 'keys' which I'm assuming is some sort of programming from the register. He said that I could either re-install windows or look online for the correct keys and reinstall them, which sounds WAY easier than reinstalling windows. I have no idea how to do that, and don't want to screw up my computer any more than it already is.
View 5 Replies
View Related
Jan 24, 2009
I can't use my touchpad. My arrow/cursor is frozen in the middle of the screen.
1) I can still use external mouse
2) I saw in similar post somebody suggested using memory tool scan from microsoft. I did find that but when I clicked on it the owner was not microsoft but some other name. I am tired of downloding stuff on my computer and find out later that they are spyware etc..
3) I purchased Norton 360 which does not help
4) I ran system restore, did not help. First when I ran system restore it gave me error message "unspecified error during system restore" I ran it in safemode and now I could restore. Then I had to do the updates again. Rebooted toshiba laptop agai and the cursor still frozen
View 8 Replies
View Related
Jul 8, 2009
i have an HP Notebook with a Vista Home Premium 32bit OS. I can't do a mouse click, directly on the touchpad. The Synaptics Touchpad V6.5 is installed. II tried to download a newer version of the synaptics, but the system told me that the installed version is newer.
View 5 Replies
View Related
Dec 29, 2008
Not really sure what genre this problem should be on. However i have recently purchased a Fujitsu Siemens Amilo Li2727 notebook. Working fine when i got it but i decided to use a usb mouse instead of touchpad now the touchpad has stopped working entirely even when usb mouse id plugged out. i really want to resolve the problem. i have already gone onto control panal, mouse but the touchpad does not come up as a device.
View 5 Replies
View Related
May 11, 2008
I am using vista home premium on a laptop with a touchpad. I am trying to find a way to use the touchpad to enter chinese characters. how to set this up. I have essentially zero knowledge in all this - how to use the keyboard to enter chinese
View 8 Replies
View Related
Apr 23, 2008
I have an Acer Aspire 5100. Mostly it works good with Vista Home Premium w/updates except the new SP1. Sometime ago the touchpad quit working and I just lived with it until today when I had a little time to investigate. In Device Manager it says the device is working properly. It also say its a touchpad on PS/2 port using IRQ12. I downloaded the latest driver suite from syaptics.com (5.2MB for the Vista 32 bit version) and ran it after disabling the device, enabling the device, uninstalling the current driver, restarting and having Vista reinstall the old drivers with no luck.
However, after running the new driver suite (an .exe file) and restarting Vista, the device showed disabled. When I enabled it - the touchpad worked momentarily (about 5 or 6 seconds). Every time I disable or enable it, it responds and works for about 5 or six seconds and then quits. No option to change the port or IRQ setting as they are 'grayed out'.
View 4 Replies
View Related
Feb 18, 2009
a while ago a program was installed with window update. The application presented a window for handwriting. maybe Vista thought my Desktop computer was a handheld device? well i disabled that application and ever since it was installed, my touchpad (which is integrated with my keyboard and has its own PS2 plug) does not work. It does show up in a list of devices though saying 'functionin properly'
View 5 Replies
View Related
Apr 13, 2008
I have an HP laptop with Windows Vista, and I have no real complaints about it except this %
ing 'double tap' thing being double click. I can't stand it. I've accidentally clicked on countless things over the past two days (I just got this laptop). Yet I can find no way to edit it. I'm about ready to chuck this thing out a window because it's so frustrating. I downloaded Synaptics, but it doesn't seem to help because I can't find the tapping options. Maybe I downloaded the wrong version of it. If Sypantics works, can some give me instructions to getting rid of double tap?
View 9 Replies
View Related
Mar 23, 2008
When I surf with IE7 og have more than 7 tabs open at the same time, its like windows runs out of memory, all of a sudden I cant open any new tabs and right click on the touchpad does not react. If I then minimize IE7 and right click on the desktop nothing happens either. If I then close a couple of programs (its only Yahoo messenger og coreTemp that are running(coreTemp shows how warm your cpu is, and min is constantly between 56 og 64 degrees celsius)), then right click works again.
Usually when this happens I cant even get the taskmanager up, but if I close Yahoo Messenger then I can, and now I can see that there is used about 47% memory, under proceses i can see that:
Yahoo uses up to 50MB,
Iexplorer 27 - 150MB
og Dwm.exe takes up to 120MB.
The problem also happens if Yahoo is not started, so thats not the cause. I have disabled aero and use minimal of all the things Vista comes with, so the I get max. performance following most of the instructions but the probleme persist every time I use IE and use more than 7 tabs (This should not happen, and using more than 7 tabs is perfectly normal)............
View 7 Replies
View Related
Jan 22, 2010
I have a Toshiba laptop, which I know has nothing to do problem just thought I say what I have. Every time I go deeper into web pages or click on additonal links within a web the DEP shuts down Internet Explorer and will not take me into where I want to go, It does this on any all sites. Ones that I fully trust to ones that maybe could be a issue but I know are not. Can someone help with this issue or tell me how to disable DEP.
View 8 Replies
View Related
Mar 24, 2008
Is there a way to disable the Alt-Tab feature when running full screen games? I use alt and tab to perform functions in game and tab out when i cross them. I know there was a way in XP.
View 6 Replies
View Related
Dec 14, 2009
How can I disable DEP?
View 5 Replies
View Related
May 15, 2010
I'm on Vista x64 Home Premium (SP1), and I have a problem. When my laptop got shipped with Vista, I disabled UAC on the spot because of various software incompatibility. Recently I have been led to enable it again because of some failing software. It didn't solve the problem and thus I decided to disable it again. However, this time, when I go on to User Accounts and I click on the "Turn User Account Control (UAC) on or off", it brings up the popup that asks me whether I want to proceed. I click "Yes", expecting the dialog box to show up so that I can successfully disable the UAC. But the dialog box never came up. The UAC popup just closed and the computer remained motionless. I tried rebooting, and manually deactivating UAC using command-line prompts which yielded "Access Denied".
And now, I cannot use my computer effectively, as most of my software is uncompatible with UAC and fails to run. Is there any way to fix this ? I only have one account that is being marked as Administrator, and it seems quite strange that I can't set UAC back off again. Google search didn't help me a lot either - most links only tell me how to actually disable it, which fails on my system....
View 7 Replies
View Related
Mar 28, 2009
if it is advisable to disable superfetch??, and if so, will it improve overall performance?
View 6 Replies
View Related
Jun 14, 2008
Is it plausible to disable parts of UAC? this because I hate the parts -blocked startupprograms (in dutch geblokkeerde opstartprogramma's) -'are you sure you want to proceed'-messages (weet u zeker dat u hiermee door wilt gaan) , but the other parts are very usefull. so is it plausible to disable these parts? the only thing I know is how to disable the whole UAC.
View 9 Replies
View Related
Sep 6, 2009
I have a problem with a customer experience program that always ask me if i want to participate in customer experience.....i will say no but then after a few days or few weeks it pops up asking the same thing again. I want to know how i can disable this program or remove it so i wont be bothered with it any more.
View 5 Replies
View Related
Nov 8, 2008
Everything was relatively hunky dory until a recent update which prevented my machine from booting. I went to system restore, and it worked. Tried the update again with the same result, and again I did a system restore. Clearly this update is a problem for me. Can anyone tell me how to disable updates?
View 5 Replies
View Related
Oct 12, 2009
I pass the mouse over a word (or my contact list) the definition of that word, along with the word in other languages pops up in a box...most of the time covering the part I am reading. This is extremely annoying. If I want to know the meaning of a word I can look it up. It is not necessary to know the meaning of each and every word the mouse passes over!! Can I disable this feature?
View 5 Replies
View Related
