Recovering Files From Computer Prior To Install
Mar 26, 2008
I recently go a new PC and had geek squad install some virus/etc software on it a remove gateway branded 'programs'...when I turned on the computer for the first time it seemed as though GSquad had installed everything as I had access to the internet, download photos from my camera, access Microsoft programs etc. When I tried to open the backup hard drive that I had from my laptop it said I needed to install Vista to proceed.
So I started to, following the prompts where it said that it would back up my previous files that I had, and it took several hours. Now that I have Vista, I realize that i don't have any of the picture files that I previously saved. I know I'm foolish not to have backed up the computer myself before the install but I didn't think it would erase everything. Normally I wouldn't be concerned but I just got engaged and we captured the moment in those photos. I know there may be no hope but I just thought someone out there might have a solution....
View 7 Replies
ADVERTISEMENT
Mar 23, 2008
I recently go a new PC and had geek squad install some virus/etc software on it a remove gateway branded 'programs'...when I turned on the computer for the first time it seemed as though GSquad had installed everything as I had access to the internet, download photos from my camera, access Microsoft programs etc. When I tried to open the backup hard drive that I had from my laptop it said I needed to install Vista to proceed...so I started to, following the prompts where it said that it would back up my previous files that I had, and it took several hours.
Now that I have Vista, I realize that i don't have any of the picture files that I previously saved. I know I'm foolish not to have backed up the computer myself before the install but I didn't think it would erase everything. Normally I wouldn't be concerned but I just got engaged and we captured the moment in those photos. I know there may be no hope but I just thought someone out there might have a solution....
View 7 Replies
View Related
Jul 17, 2008
I am about to install Vista64 home premium on a new build with 8 megs of RAM. The disk is Vista64 SP1. I was wondering if it is still recommended to install Vista64 with only 1 stick of RAM first prior to installing all 8 megs? Or because the disk has SP1, is this no longer an issue?
View 9 Replies
View Related
Jun 8, 2009
I have deleted a few things from my recycle bin in the last few days and need to recover them, Need the best program possibly free ware that will get them back, the are message logs from MSN which were deleted from the chat logs folder so they are not in there. if it helps I only deleted them 2 days ago so I don't need to recover
View 4 Replies
View Related
Nov 23, 2009
I had three MS Word 2007 docx files on my hard drive. I deleted them and emptied the trash. I immediately used some File Recovery programs to try to recover them. The programs were unable to find them. That seems very strange to me. Is it possibly because they are docx files? This is a relatively new file type by Microsoft, right? I am using MS Word with Vista Home Premium.
I should probably add that the programs cannot find files with the names of the files I deleted. Are the names changed when they are deleted and the Recycle Bin emptied? I have heard that files are not wiped clean from your drive. Only the directories are changes, but the data is still there until it is written over..................
View 8 Replies
View Related
May 24, 2008
I own a product key for vista premium and I later upgraded to ultimate online. I do not own an ultimate product key and I want to reinstall vista on a clean hdd. What can I do to install ultimate? (I have a confimration number of my "ultimate upgrade" order but it's not shown even on digiital locker")How can I install ultimate on a clean hdd if I own a premium product key but I bought an upgrade to ultimate?
View 6 Replies
View Related
Apr 12, 2008
when I just turned on the computer the message "Configuring updates" and "Please wait" appeared. Afterwards, when it was completed, all the programs previously open (I kept my session in memory) were closed! When I opened IE, all the tabs were there, but other files I were working on were gone.
View 5 Replies
View Related
Dec 25, 2008
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
View 9 Replies
View Related
Feb 10, 2009
At one stage I did disable this prompt for a specific file extension, so that nowadays those attachments will open up at once. But now I'd like to reactivate such prompt.
View 5 Replies
View Related
Aug 28, 2008
I wondered if there is more - or + value to doing a restore prior to my sp1 download, I would like to make a recovery disc using brinks great tutorial. I only have my retail purchase computer created one time recovery discs.
View 6 Replies
View Related
May 8, 2009
how to run a batch file prior to windows logon vista home premium. I have a few problems with my motherboard and my cmos battery is unsoldered and my battery is knackered. At present I have a batch file to set date and time in my startup folder but would like to do it before this as programs are loading and trying to initialise before the correct date and time set, this causes errors.
View 8 Replies
View Related
Apr 14, 2008
I'm running Vista Ultimate on my present computer, have full installation dvd. I'm buying a new Dell computer that comes with Vista Basic installed. Can I move Vista Basic from the Dell computer to my old computer and install my Ultimate on the Dell?
View 9 Replies
View Related
Mar 2, 2008
I'd very much like to recover both mail and address books from an image. I can mount my old c: drive and search though it just like any other drive, but I have no idea what files, in the Outlook 2007, hold this information.
View 9 Replies
View Related
Apr 26, 2009
im trying to recover from a hd that was reformatted and had vista reinstalled on it... nothing else has been done to it. do i need to scan it from another computer? if so how do i connect them so that the second computer will see the laptop as an hd?
View 9 Replies
View Related
Nov 10, 2009
i had company installed vista basic.. and a recovery partition of it.. now once i formatted vista and installed windows 7. for few problems i reverted back to vista. but now tht recovery image is not identified anymore.. is it like now its of no use?? can i do system image restore from recovery partition? i tried browsing and locating.. but no hope.. i will be glad if anyone knows or can tell me a way...
View 9 Replies
View Related
Jul 29, 2009
I tried running my HP Recovery Manager a couple of days ago and it kept freezing around 77% so I talked to someone at HP and they said I needed the recovery disks, so I ordered them. I tried using them today and HP Recovery manager freezes at 33% during the re-install process. Why is it doing this? It's driving me crazy.
View 4 Replies
View Related
Mar 29, 2009
I seem to have lost all emails received from one person after attempting to do some tidying up by putting my received emails into named folders, I have checked all of my in box but cannot find any email from a particular person. Perhaps I have accidently deleted them when attempting to move all of them at once to a new folder? If so is there any way I can recover them as they are not in my deleted items folder? I am using vista and windows mail.
View 4 Replies
View Related
Jan 2, 2010
I have tried getting my WPA2 password from my router but can't get into the page using "admin" "password" etc or any other combination. This laptop has it stored somewhere in vista because when I turn it on it automatically connects to my network. My other computers have lost the stored code and I want to get it from wherever it is stored here in Vista so I can input it back into my other machines.
View 4 Replies
View Related
Nov 3, 2008
I want to say that all my drivers are updates and windows is updated as well. This is also valid for any other computers on the network. My computer runs vista home premium 64 bit, the other computers on the network run home premium 32 bit. We have a gbit network through a d-link router (dir655) which has never given us any problems. We have the d-link because I couldn't find any other router at the time which supported a glass fibre connection at the speed we have (50 mbit synchronous) and which also offered a 1 gbit home networking solution (wired) while also offering the possibility of using it with the occasional wifi device (such as my archos 605 media player).
my first annoyance has to do with the network. SP1 made it better, but I'm still annoyed. When I copy files from one computer to the other, the file transfer goes at varrying speeds. The transfer speed seems to depend on one thing and one thing only, and that is on whether the other computer is being used at all. If the other computer is idle (so not even the mouse is moved, there is no user input at all), transfer speeds are between 55 and 70 mb per second. Which is good, I like this. When there is any kind of activity on the other computer, whether this is typing, using the mouse or any such thing (user initiated I mean.... a virus scan doesn't seem to affect the transfer speed) the transfer speeds drop down to a max of about 18 mb per second. When any type of media player is on, even when paused, it drops down further to between 13 and 15 mb per second. When that media player is windows media player, the transfer speed is usually a bit lower still.
I simply do not understand why this is. The transfer speeds with no activity at all show that there is a possibility of achieving these speeds... the network is not used when someone moves their mouse, so why can't I use the full extent of the network when someone is using their mouse, or typing something in word? Also, I know that a media player automatically reserves bandwidth for streaming, but going from a max of 70 mb/s to 15 mb/s seems a bit much to me for streaming purposes. I would also have thought that MS could make their media player a bit smarter... I mean, how hard can it be for them to disable the bandwidth reserving when someone is playing a local file?......
View 9 Replies
View Related
Oct 18, 2009
I just recently got a new computer installed with the Vista Home Premium x64 OS. After many failed attempts at transferring my old files i eventually ended up putting my old hard drive into my new computer, and attempted to drag and drop into a folder i created specifically for those files. Upon trying to do this, it transferred all of my program files, but when it gets to my actual documents, where i keep my most important files, it says i need administrative permission to do this.
Then, when i tried to access the files directly in my old hard drive, it said that i couldn't do that, and showed this: "You don't currently have permission to access this folder. Click continue to get access to this folder." "You have been denied permision to access this folder. To gain access to this folder you will need to use the security tab." and then when i use the security tab to transfer file permission to me, it still doesn't do anything.
View 6 Replies
View Related
Mar 8, 2009
I purchased Vista Premium with SP1 which came with both the 32 bit and 64 bit dvd's. I'm currently running the V64 version but I have a few needed apps that just won't run on the 64 bit system. I was wondering if I could install the x32 bit and set up my computer as a multiboot setup using the same key or would I have to buy another key to have both versions of the OS on the same computer?
View 9 Replies
View Related
Oct 9, 2009
I have fonts loaded on my Windows XP machine that I would like to install on my new Vista machine also.
View 9 Replies
View Related
Nov 30, 2007
Purchased a copy of windows vista ultimate and installed the 32 bit bit version and everything runs perfect, however when i try to install the 64 bit version my computer freezes either during the installation or right after the install is complete.
Ive tried everything. Installed on different hard drive, used different memory, different power supply, different CD rom drive, absolutely nothing will get the installation to not freeze. The windows event viewer is useless. I even tried 3 different install cd's. It's not overheating as far as i can tell either. Like i said vista 32 runs perfect so i cant understand whats going on? Should I RMA my motherboard? Ever heard of a cpu being defective in this way
View 8 Replies
View Related
Jan 23, 2008
Only just discovered this forum - looks really interesting. I currently have an OEM copy of Vista 32bit which I run quite happily, but would like to install x64 on another hard disc to test it out etc. I can borrow an x64 installation disc from a friend, can I install and activate x64 using my 32 bit key? Like I said, its the same system but will be installed on another hard disc. Will it allow me to activate? Or do I have to buy another copy of x64 OEM?
View 6 Replies
View Related
May 5, 2008
I have an old computer on which I have installed my purchased copy of Windows Vista Ultimate edition. It has reached its end-of-life and I am about to decommission it. I want to purchase a customized desktop and install the same copy of Windows Vista Ultimate on it after removing it from the old machine (formatting old machine's hard drive). Can I install Windows Vista on another computer after decommissioning the one on which it was installed previously? Is this legal? Do I need to notify Microsoft about it? How can this be achieved? Do I need to re-activate the copy of Windows Vista?
View 6 Replies
View Related
Jan 11, 2009
i have a problem with my photoshop Cs4 installer. everytime i go to install, a window comes up and says "checking system profile" it gets to about 90% then Freezes. Is this common
View 7 Replies
View Related
Mar 23, 2008
I had to reinstall Vista due to malware that I could not get off my computer. I could not do a repair, and now Vista is new on my system. The problem is that I now cannot activate it, and I get a notice that says that I need to enter a new number. I do not think that I need to, but I don't know how to reactivate. I called Microsoft, but the person (honestly) hung up on me.
View 5 Replies
View Related
Mar 22, 2009
I have just done a fresh install from the recovery partition in my Tohsiba X205 laptop. I have 4 GB of RAM installed, but I now see only 3 GB--and when I try to activate ReadyBoost, there is an error message telling me there is already a cache on another device in the system. Because of the sudden disappearance of 1 GB of memory, I suspect it has somehow been allocated to disk cach. How do I go about recovering that 1 GB and activating ReadyBoost.
View 7 Replies
View Related
Mar 23, 2008
I just upgraded my system's motherboard, chip, and ram and ran into a big problem. When I booted up for the first time, Vista started to boot up then reset. When I ran recovery, it told me some drivers were corrupted (probably the old hardware) . I ran the motherboard disk and installed the new drivers and to make a long story short, it didn't work. Add that to the fact that I can't find my serial number sticker and I'm screwed. Is there a way to find my serial using the Dos prompt or can windows pull my serial off my hard drive if I reinstall? Please help, the copy of Vista is only 4 months old and I was waiting to put the sticker on when I got the new case + Motherboard setup
View 4 Replies
View Related
Dec 8, 2008
I'm certain that I screwed up and somehow denied myself access to everything under the C: root. C: and all its files fails to show up when I go to computer. Actually, I'm fairly certain that I did this to myself when, due to my great lack of understanding on how to manipulate permissions, I messed things up while trying to give myself permission to do something with my shortcut to computer. I naively fooled around with properties>security.
View 9 Replies
View Related
Apr 8, 2009
I can't modify any files or folders anywhere on my computer. For example, if I create a new folder on my desktop, when I try to rename it the name still stays at 'New Folder' which I can't get rid of. Also I can't encrypt any files or folders. I am the administrator of the computer and there is no other users. I have tried taking full control of the files/folders on the security tab on properties and also using software like 'Unlocker' but nothing seems to work.
View 9 Replies
View Related
