My sisters PCz keeps going to sleep. I changed power options to never but each time she restarts the PC the settings go back to previous settings. i have looked around here for answers but nothing applies to her pc. all was fine before SP1 but i dont think that is the problem.
View 6 RepliesI have a folder (on my desktop) and when I open that folder, I want to view the files inside that folder as small icons. So I open the folder, select View – small icons, then deselect “auto arrange”. Then I put the icons in just the order that I want them and everything is fine. I close the folder and re-open the folder, and the files are still displayed by icons and positioned just the way I want them. Great so far. But then the next day, when I open the folder, the folder is back to displaying the icons by “Details” and the files are back in the original order. Very annoying to say the least.
The files are MP3 for some daily listening, and after I listen to one, I want to move it down to the bottom. Then the next day I listen to the MP3 on top and then move that one down to the bottom. Worked fine with XP, but now with Vista, everyday the folder gets changed back to view by Details, and the files are back in original order. How can I keep Vista from automatically changing folder views back to Details and leave it on “Small icons (no auto arrange)”. I tried searching for the answer on the forum, but got an error that I don’t have permission to use the search function.
I have set up a power plan in Vista Home Premuim 64Bit on my laptop. Is there anyway to have the laptop change to that plan when its plugged into the mains and stay on another one when its on battery? Or do I have to keep changing it?
View 7 Replies View RelatedI recently had graphics card problems and had to get my 8800GTS replaced. This took several weeks and now I'm running a 8800GT perfectly fine. However, I've noticed my Power Options seem to be corrupt. Upon going into Power Options in the Control Panel, it says "Your power plan information isn't available." I cannot understand why this has happened. I haven't touched any settings or anything to do with that. I have tried System Restore to an earlier point (before I got my new graphics card) and it didn't seem to help. The help on the page says that registry keys may have become corrupt or been deleted. I'm not sure if this is the problem, but if it is how can I fix it? System Restore didn't help.
I would like to avoid doing a Repair with the Windows disc. I'm hoping there's an easier way to fix this problem. There has to be! I've been looking on Google and there is hardly anything on this problem. The very few people who do have it cannot seem to fix it, or used previous registry backups (which hasn't worked for me). There doesn't seem to be any resolutions from Microsoft at all. I also tried using the "powercfg" commands in the command prompt, but didn't seem to have any luck there either. I cannot Hibernate or Sleep at the moment and it's a real inconvenience. I'd really like my Power Options back!
Just to get better explaination about this.Whenever i set the Power Options->Turn Off The Display->Any Value->then when monitor went to off(standby) = Windows Crashed/Blue Screen. But, when i set to never, no problem. Already tried all the values, result = same.
View 9 Replies View RelatedI have an HP laptop using Vista SP-2. Until recently, the power settings worked the way I set them (especially shutting off the display after 15 minutes of idle time). Now, this particular setting doesn't work (the display stays on all the time). I haven't checked the other settings yet. Tried Google but couldn't find anything that applied.
View 9 Replies View RelatedI use a Vista Business OS installed but am unable to see thumbnail preview in my taskbar. When I check the Taskbar and Start Menu Properties it shows as greyed but deselected and I have not found a way to enable this option. Similarly under Notification Area Tab the Power option inder System Icons also is greyed and deselected. Can anyone tell me how to select this 'Show Window previews (thumbnails)' and 'Power' options.
View 6 Replies View RelatedI've Vista Home Premium on a Toshiba P200 Laptop and here's the tummy-turning experience I'm having. I've set the power options for the computer to "go to sleep" in 20 minutes. I've gone to the Power Options then "change power options" and there have set the "sleep" for twenty minutes. The weird and wonderful thing is, if I reboot the computer, this will work for say, three or four times, then it doesn't after that. I've set the "when sharing media" in the Multimedia Settings to "prevent idling to sleep" - but again, it refuses to work until I reboot the machine. Then again, it will work several times and then it doesn't. how to set this unit to sleep when left unattended after so many minutes.
View 9 Replies View Relatedis there any way to show the power plan in tray like in winxp so i can change between plans (balanced, power saver...)
View 7 Replies View RelatedI just recently finished upgrading my system from an nfroce 4 based Athlon 64x2 to a quad phenom 9850 with an amd 790fx based motherboard. So far it's all gone very well except one nagging issue. My media center can no longer record TV and my Zune player keeps throwing out error messages regarding media rights needing to be reset. After checking the event log I confirmed that Media Center is also unhappy with the current DRM situation, I guess
because the motherboard changed.
I've followed the steps outlined in this KB artical {url} but I've run into a snag. It points you to a website to update media rights but the site is broken, and I mean ompletely broken. All I get is a JS error saying invalid parameter, a generic MS gui and a continue button that is disabled and stays that way.
Resetting settings to default?
View 3 Replies View Relatedhow to get Windows to remember my modem settings. Every time I wake up or restart my computer I have to get Windows to reset my modem. This has only just started happening after I had help from Microsoft. They had me run a reset .bat to reset my services (in an effort to restart Security Center). It failed and I have since run Black Vipers "safe" settings and also turned off Media Center services. Microsoft help has left my computer in a worse state than it was before I went to them
View 9 Replies View RelatedIt seems many people have problems with Internet connections in Vista. I am one of them and have gone through all the discussions looking for a solution - nothing so far!! What seems to work is a script that automatically resets the adapter on
start up
I have an IMAP email folder. Every now and then (1-2 weeks), when I go into the folder, Windows Mail forgets all Mails in the folder, and immediately re-fetches the list. Then I need to re-download all the messages, either by clicking on them or by synchronizing the folder. As the number of messages is quite high, this takes a lot of time and is an annoyance every time it happens.
View 5 Replies View RelatedI have recently guided a friend on a new PC and set it up for him. I created his email account in Windows Mail but after a couple of days send/receive did not download emails though no error was shown, however they were viewable at the ISP's server. As the emails are still at the ISP's server they are not going into another folder. Deleting his account from Windows Mail and setting it up again allowed emails to download but this pattern has to be repeated on a regular basis. The new PC is a Dell 530S O/S Vista Premium, 2GB RAM. The Antivirus/Firewall is F-Secure. The ISP is BT in the UK. This problem never arose with Outlook Express on his old PC. Is there a known issue with Windows Mail that might be causing
View 6 Replies View RelatedI've tried resetting the local cache files - no change. Can't see any options on WinMail to "ignore your own posts". Windows Mail is version 6.0.6000.16386 (vista_rtm.061101-2205)
View 7 Replies View RelatedI have a general question re network settings under Vista Home Premium. On occasion, during busy times of the day, my cable modem will indicate that the connection is lost. If I manually unplug the power cable to the cable modem and router, wait until 15 or so seconds, and reconnect the cables, I can usually suceed in obtaining a connection. I assume the computer looks and finds a new address from my IP.
Under Vista, using cmd.exe (elevated), I tried ipconfig /renew but
received the following message - An error occured while renewing interface
Local Area Connection : unable to contact your DHCP server. Request has
timed out. [end quote]
I recently downsized from three monitors and two video cards to two monitors and one video card. However, I have one program that keeps coming up on the third monitor even though there is no third monitor.
Does anyone know how to get that program to load on the main monitor?
You would think Microsoft would be smart enough to fix Vista so that it realized a monitor was now missing and open the programs on the default screen.
Blue Screen crash that dumps before resetting - according to the minidump its a WHEA_UNCORRECTABLE_ERROR, but it doesn't state which piece of hardware it is.
The dump file arguments are as follows:
Arg1: 0000000000000000, MCA_ASSERT
Arg2: fffffa8009785c6e, Address of WHEA_ERROR_RECORD structure
Arg3: 00000000b6200013, High 32 bits of MCi_STATUS MSR for the MCA bank that had
the error Arg4: 0000000000080a01, Low 32 bits of MCi_STATUS MSR for the MCA bank that had...........
I recently had a problem with my Dell Inspiron 1525 (System Event Notification Service error) and I had to use the function to return the system to its factory settings. I believe this involves using an OS image that's installed on a separate partition on the laptops hard drive. I followed the steps in the manual which involves using the F8 setup screen and selecting "repair your computer" and "system recovery options" and selecting restore factory settings or something to that effect. I selected this and after about 10 minutes a message appeared stating that the return to factory settings was successful. Per the instructions, I hit enter but after I did the computer went into a continuous loop of showing the bios screen and what sounded like trying to boot up and then back to the bios screen. It would continue doing this unless I hit the power button or pressed the F2 key or the F12 key. I hit F2 and noticed that the boot sequence had been changed to diskette drive as first and hard drive as second....
I guess I have the other option of reinstalling the operating system from the OS disk Dell provided but I'm wondering if that is the same as the restore to factory settings option? For example, are all the necessary drivers and other applications that were on the machine when it left the factory copied during installation? The manual says the OS image file on the hard drive has all the drivers and applications so I'd really like to go that route if I can but I do need some advice on how to fix this problem with the Bios looping.
I have two labtops, one (gateway) with Vista and one (compaq) with XP. Each one runs on a Netgear router and for the first few months I had the Gateway which I bought last December there were no problems. Around August I could get to the start page on Internet Explorer but when trying to get to another website my page loaded half way slowly on my usually fast connection then stopped, no error message no internet conection problem screen, just kept loading but couldn't load any farther. I've tried everything, updating Vista and McAfee, resetting Internet Explorer, deleting cookies and favorites as well as other internet files, scanning for spyware, othning works. Details: 2006 Gateway M-6816 model with Vista Home Premium 32-bit, wireless connection, Netgear router provided by Comcast, Internet Explorer 7.
View 8 Replies View RelatedSomehow my basic active windows text font changed. I think newly installed software may be to blame. Anyway, following the help suggestions of going to "Appearance Settings" and clicking on "Advanced" looks promising. However, for Windows Vista Basic, Standard, & Classic clicking on the Active Text within the Active Windows only get item Windows which does not allow me to set a font. Only a general color and a font color. I can't figure out how to reset the font. The font drop down list is empty and inactive.
View 9 Replies View RelatedTo prepare for a dual boot installation (Vista / Ubuntu) I had to allocate space on my C-drive using Vista's 'Disk Management' and 'Shrink Volume' features. Unfortunately, in the process of making the allocation, I mistakenly allocated 40 MB instead of 40 GB. Went back into 'Shrink Volume' to correct the allocation but it apparently cannot increase space. Also tried 'Extend Volume', no luck there either (or maybe I just don't understand how it works). For what it's worth, here's my current C-drive allocations.
144.81 GB NTFS
40.00 MB Unallocated (reserved for Ubuntu) (this is what should have been 40GB)
75.29 GB Primary Partition
3.24 GB Primary Partition
9.49 GB NTFS
I should also mention that I already have Ubuntu installed, so this is actually a re-installation to solve a connection problem I'm having with Ubuntu.
i used advanced vista optimiser to give my laptop a good clean out as i do every week. but this time when i went to log on the diagnostic comes and says either change proxy settings or try resetting local connection setting. i tried resetting many a time which as done no good. web address bar states where its going but the diag box comes on again.so in the mean time while this is all going on a new tab keeps on opening by its self and saying the same thing,this started to happen before i cleaned my l.p but it was just redirecting to a blank page.
that is why i did the clean.anyhow resetting the lan did not work so i reset the internet expolorer in the tools on the bar. which as worked but the same thing is still happening with the tab ,but now its redirecting to all the freebiee sites and it will not stop. i have spyware-adware-trojan software on my l.p and still no good it did pick up 3 infections which it sorted out, its driving me f*&^%*ng nuts:mad::mad:
I want to install the 64-bit version of vista, but I'm not seeing the option to do so anywhere...I should easily meet the system requirements, I have dual quad core amd opteron barcelona chips, 8 gigs ram. I installed xp, then did the upgrade from the vista disk, but it never asks me if I want the 64 bit option bp
View 4 Replies View RelatedI'm in the process of transferring my Hi8 video tapes to my PC for safe keeping. The one drawback I see with the Hi8 tapes is that if the camcorder dies, so does my playback mechanism. To get the highest quality I'm creating AVI files, and each tape is approximately 13 GB of data. I'm capturing in segments around 3.3 GB each. Needless to say, I've filled most my PC drive space, including my 300 GB external USB drive. I'd like to back these files up to DVD as 'raw files' for future editing (as opposed to actually creating a DVD that can be viewed on a DVD player). I have Vista Home Premium, and XP Pro as OS options. I started just dragging the files to the DVD drive on my Vista and had some success, but for some reason it doesn't always work. how best to back these files up? I've looked at a couple backup packages but haven't seen anything that strikes me as what I'm looking for..
View 4 Replies View RelatedCan anyone provide a table like this one, but for Windows Vista instead of NT? No luck with web searches so far. Guess I haven't found the magic key-words.
View 4 Replies View RelatedFirst off, when I go to Create a Restore Point, it always takes the system about 20-40 seconds before it gives me what I want which is C drive checked in the list to create a restore point on. It shows me all my USB hard drives and other partitions, none of which I ever want to choose to create a restore point on. Is there a way to choose to have only the C drive come up on this list of possible drives for restore points? (I assume this would be quicker, since it would not have to find all those other drives/partitions before showing me the C drive.)
Secondly, since I only have an 83gig partition for C drive with Vista (64-bit Home Premium) and programs using 43 gigs of that; so how much space do I really need for System Restore points? I know there is a page here on this forum somewhere for going into the system via Command and changing the amount of space allotted for System Restore. Should I leave the Default allotted space or should I change it to a smaller amount? (My computer came shipped with a 700+ gig C drive but I shrank it to 83gigs and the rest is for just archiving, with a special partition for ripping and burning and decoding files.) Third: Where are the System Restore point files or whatever they are stored?
Fourth: Aside from manually creating a Restore Point via System Protection, is there a way I can make it create a Restore Point once a day at a particular time? I think it creates one at startup every day (I'm not sure, but I seem to recall that it does this), but is there a way to tell it, say, to create one every day at 5pm, or something like that in addition to creating one at start up? Or would that require too much disk space alloted to it? (I have a big hard drive, but I'd just as soon not junk it up with an excessive amount of System Restore space.)
On occasions I receive email that when I right click on and select Junk
E-Mail
the menu's items are disabled.
Back in November, I explored the number of editions of Windows 7 that Microsoft was working on. While the company has not officially given a list yet, it was clear that Windows 7 Enterprise Edition and Windows 7 Ultimate Edition were definitely coming. Furthermore, there was an obvious avoidance of naming a Windows 7 Business Edition, though there was a mention of a Windows 7 Small Business Edition. While doing a little more digging, I stumbled on the following upgrade paths for Windows Vista to Windows 7. These are not confirmed, but I am told they are what Microsoft is currently considering: Windows Vista Home Premium Edition => Windows 7 Home Premium Edition Windows Vista Business Edition => Windows 7 Professional Edition Windows Vista Ultimate Edition => Windows 7 Ultimate Edition Full Story: Rumor: three options for upgrading from Vista to Windows 7
View 9 Replies View RelatedIs there an easy way to add WinDVD9 to my autoplay choices for Blu-Ray and regular DVD's in Vista x64? For some reason its not listed as an option and I can't figure out how to add it on my own. I know I can always cancel autoplay and launch the App and then open the DVD that way but would be nice to figure out how to set it up so it shows as an option in my Autoplay list.
View 1 Replies View Related