Power Options->Turn Off The Display Windows Crashed

Oct 7, 2008

Just to get better explaination about this.Whenever i set the Power Options->Turn Off The Display->Any Value->then when monitor went to off(standby) = Windows Crashed/Blue Screen. But, when i set to never, no problem. Already tried all the values, result = same.

View 9 Replies


ADVERTISEMENT

Power Options (especially Shutting Off The Display After 15 Minutes Of Idle Time)

Mar 4, 2010

I have an HP laptop using Vista SP-2. Until recently, the power settings worked the way I set them (especially shutting off the display after 15 minutes of idle time). Now, this particular setting doesn't work (the display stays on all the time). I haven't checked the other settings yet. Tried Google but couldn't find anything that applied.

View 9 Replies View Related

Ultimate X64: Turn Off Display, Will Not Turn Back On

Nov 2, 2007

Running Windows Vista Ultimate. Display turns off after about fifteen minutes regardless of whether I am actively using the computer or not. The only way to turn the display back on is to close and then open the lid. This disconnets me from AOL, so I have to sign back on again, and if I was emailing, I might lose my current email. Under Power Options, I have 'Turn off the display' set to Never for both On Battery and Plugged in. Under 'Put the computer to sleep' I have both On battery and Plugged in set to never. Nonetheless, the display still shuts off while I am working. What do I need to do to prevent the display from turning off at odd intervals?

View 6 Replies View Related

Power Options

May 8, 2009

I have set up a power plan in Vista Home Premuim 64Bit on my laptop. Is there anyway to have the laptop change to that plan when its plugged into the mains and stay on another one when its on battery? Or do I have to keep changing it?

View 7 Replies View Related

Power Options Resetting

Apr 24, 2008

My sisters PCz keeps going to sleep. I changed power options to never but each time she restarts the PC the settings go back to previous settings. i have looked around here for answers but nothing applies to her pc. all was fine before SP1 but i dont think that is the problem.

View 6 Replies View Related

Power Options Corrupt

Sep 15, 2008

I recently had graphics card problems and had to get my 8800GTS replaced. This took several weeks and now I'm running a 8800GT perfectly fine. However, I've noticed my Power Options seem to be corrupt. Upon going into Power Options in the Control Panel, it says "Your power plan information isn't available." I cannot understand why this has happened. I haven't touched any settings or anything to do with that. I have tried System Restore to an earlier point (before I got my new graphics card) and it didn't seem to help. The help on the page says that registry keys may have become corrupt or been deleted. I'm not sure if this is the problem, but if it is how can I fix it? System Restore didn't help.

I would like to avoid doing a Repair with the Windows disc. I'm hoping there's an easier way to fix this problem. There has to be! I've been looking on Google and there is hardly anything on this problem. The very few people who do have it cannot seem to fix it, or used previous registry backups (which hasn't worked for me). There doesn't seem to be any resolutions from Microsoft at all. I also tried using the "powercfg" commands in the command prompt, but didn't seem to have any luck there either. I cannot Hibernate or Sleep at the moment and it's a real inconvenience. I'd really like my Power Options back!

View 9 Replies View Related

How To Select Show Window Previews (thumbnails)' And 'Power' Options

Mar 23, 2008

I use a Vista Business OS installed but am unable to see thumbnail preview in my taskbar. When I check the Taskbar and Start Menu Properties it shows as greyed but deselected and I have not found a way to enable this option. Similarly under Notification Area Tab the Power option inder System Icons also is greyed and deselected. Can anyone tell me how to select this 'Show Window previews (thumbnails)' and 'Power' options.

View 6 Replies View Related

Turn Off The Power, Computer Goes To Sleep

May 4, 2008

The 1st problem is everytime I close my lid/turn off the power/click the sleep button to put my computer to sleep before I go to sleep myself at night, I always wake up and my computer is at the log in screen, but it has restarted without any settings I'm aware of making it restart. I then log into my computer and it says that "windows has recovered from an error causing it to shutdown" etc etc.

Then 2nd problem is whenever my computer does come back from sleep, which it does if it hasn't been asleep long, or whenever it is restarted in general...my monitor settings from my dual monitors changes. I have to go back into the properties tab and change it so I can drag my mouse from the left screen across to the right, and change which monitor is my main monitor. Sometimes my recycle bin icon even goes back to a different spot on the monitor.

View 6 Replies View Related

Power Scheme-Sleep Mode Turn Off

Jul 1, 2008

Power Scheme-Sleep Mode I use Vista on my Dell PC and have my power settings set to turn off my monitor in 15 minutes and my PC in 20 minutes (sleep mode). When my PC enters the Sleep mode, it only stays in that mode a short time, usually three or so minutes at the maximum, then it activates and my monitor turns on. Is this normal for this power option? I would expect my PC to stay in the Sleep
mode for a longer period of time, at least some of the time.

View 4 Replies View Related

Caps Lock Display - How To Turn Off?

Oct 8, 2009

I have Vista where an indicator pops up whenever you turn Caps Lock on and off. Earlier today, whenever I turned Caps Lock on or off, I couldn't type for a few seconds, which was annoying. When I tried it again later, there was no delay. The page below says how to turn off this annoying feature, but I don't have a folder called WidcommBT. Do you know what I could look for? Have you found that this popup delays your keyboard?

View 9 Replies View Related

Display Slow And Hang When Turn It On

May 28, 2009

my problem is my computer will hang when i turn it on, so i need to reset it for 1 or 2 times to get it on. Second problem is the display is very slow, sometime i can see the pop-up come out in 3 steps. i connect my monitor to the slot at the graphic card, it that right? i have used it for 2 months, really need to rectify it.

View 5 Replies View Related

Monitor Display Doesn't Turn Off

Feb 9, 2008

the display doesn't turn off after the configured time set in the active power plan. The screensaver works fine, so it's not that (for example) a mouse is giving random input. Also, when I shut down the computer, the display jumps to powersaving, so the display works fine. I've already tried a lot of things to solve it........

View 7 Replies View Related

Power Management No Longer Allowing Me To Change Display Brightnes

Apr 17, 2008

I'm on a Toshiba Satellite that's worked fairly well except for a few self-repaired hiccups. However, about a week ago my power management plans suddenly stopped working. I can switch from different plans that change how quickly my display turns off, but my screen has been stuck at the lowest brightness possible for a while now. It has nothing to do with the plans themselves, I've restored all to their default settings and still no change in brightness when I switch between all of them. The little slider to adjust
brightness simply does not appear anymore. I can't find what exactly it is that's malfunctioning to reinstall, as no power management driver appeared on my disk from Toshiba. Can anyone provide an explanation or perhaps a link to repair this?

View 9 Replies View Related

Booting/memory: Turn On But Not Boot (did Not See Any Display)

Apr 5, 2009

i installed vista 64 ultimate with 3 gig of ram but i was told that vista 64 could run with 4 so when i installed the 4th gig or ram my pc would turn on but not boot (did not see any display) so a friend told me that it is a known issue and to fix it i needed to reinstall service pack 1 with just 2 gig then that would allow me to install the full 4....i did this and now my comp will not boot unless i have just 2 gig, it wont even boot with 3 gig like before,

View 9 Replies View Related

Set The Power Options For The Computer To "go To Sleep" In 20 Minutes

Dec 5, 2009

I've Vista Home Premium on a Toshiba P200 Laptop and here's the tummy-turning experience I'm having. I've set the power options for the computer to "go to sleep" in 20 minutes. I've gone to the Power Options then "change power options" and there have set the "sleep" for twenty minutes. The weird and wonderful thing is, if I reboot the computer, this will work for say, three or four times, then it doesn't after that. I've set the "when sharing media" in the Multimedia Settings to "prevent idling to sleep" - but again, it refuses to work until I reboot the machine. Then again, it will work several times and then it doesn't. how to set this unit to sleep when left unattended after so many minutes.

View 9 Replies View Related

Folder Views: Set Up The Folder Options To Display The Number Of Subfolders Or Items When Its Selected

Jun 2, 2008

how to set up the folder options to display the number of subfolders or items when its selected. It used to display in the bottom of the folder window but got disabled. Any folder clicked on would display in a small footer the number of items stored in in and size.

View 9 Replies View Related

No Video, "never Turn Off Display"

Feb 20, 2010

I recently had to reinstall Vista after a HD failure. Almost everything is working as expected. I do have tasks that I want to have run for long periods of time (usually overnight). I have set my power options to "never turn off display" and "never sleep". Screensaver is set to "none"

This works for shorter periods of time, but when I leave the PC overnight, I come back and my monitor indicates that it is getting no signal. The PC power lights are still on, but nothing I do turns the monitor feed back on (keyboard and mouse input have no visible effect). This is not a monitor sleep issue, I have confirmed that it is not recieving signal from the PC.

I've tested this even when my tasks are not running, so I know it isn't related to that. Also, I didn't have this problem before the reinstall. I'm concerned because the only solution is to cold boot, and that would be bad if the PC happens to be in the middle of a task, or a windows update or something. Other than the power settings and screen saver, what else should I be checking in Vista that might create (or prevent) this type of behavior?

View 5 Replies View Related

Windows Crashed; Black Screen With Coursor: Cant Install New Windows

May 15, 2010

My Toshiba Labtop has crashed.I think a shared file was deleted. Labtop was operating under Windows Vista Home Premium 64 bit.It happened right after uninstalling Java; because the dang updates kept popping up and it was getting annoying. Now whenever i start it, it comes to a black screen and a minute later a cursor pops up. Safe mode does not work.I have tried the recovery disk, but to no avail.I know im doing right because i purchased some Boots Disks off ebay and they come right up (PC wizard; Pc doctor).So i bought Windows Vista Ultimate and tried to install and i cant get to install thru boot.I ither need to know how to install windows thru boot, but id much rather just fix current windows.

View 4 Replies View Related

SP2 Crashed Not Running Windows

Aug 1, 2009

I installed vista sp2 yesterday and now my laptop won't start. it offers two options, start in repair mode or start normally. I have an 18 month old Toshiba Equiium running vista home P 32 bit. If I start normally, the microsoft logo comes up and then the screen blips blue momentarily then it goes off. If I run the repair, it scans for faults, then prompts to run a system restore. I take this option and then it takes many minutes to attempt repairs - ultimately ending with 'windows cannot repair..."

there is a log with lots of 0x0 type errors notices (which are meaningles to me) I can't even get to the point where I could elect to restore to last best save or whatever. I have all my docs backed up on a portable HD but I cannot get past this failed repair message.

View 9 Replies View Related

Power Option: Can Show The Power Plan In Tray

Mar 15, 2008

is there any way to show the power plan in tray like in winxp so i can change between plans (balanced, power saver...)

View 7 Replies View Related

Windows Install, Hard Crashed

Apr 4, 2009

Never in my llife have I seen a problem with INstaller, but it's happening. In fact, this OS keeps coming up with new bummers, that I haven't had befor. It hard crashed after a few weeks of operation, and a mini hard stroke this week, forget the old blu screen of death, this one has it's one, just discised a little. I've heard one can convert back to XP, but having skipped that one, I don't know how it is. Please put on thinking caps for me as I'm stumped and every thing puiter related is getting more difficult as time goes on.

View 6 Replies View Related

Crashed, Lost System Disc, Windows Product Key

Apr 6, 2009

my stepdaughter's laptop's hd crashed (unusable), she of course lost the system disc. I have my laptop and system disc, both laptops are gateway but different models 6752 and 6836. I have a new hd on order, and I will install vista with my disc and her windows product key (her laptop) I shouldn't have any problem with that right?

View 9 Replies View Related

Three Options For Upgrading From To Windows 7

Dec 26, 2008

Back in November, I explored the number of editions of Windows 7 that Microsoft was working on. While the company has not officially given a list yet, it was clear that Windows 7 Enterprise Edition and Windows 7 Ultimate Edition were definitely coming. Furthermore, there was an obvious avoidance of naming a Windows 7 Business Edition, though there was a mention of a Windows 7 Small Business Edition. While doing a little more digging, I stumbled on the following upgrade paths for Windows Vista to Windows 7. These are not confirmed, but I am told they are what Microsoft is currently considering: Windows Vista Home Premium Edition => Windows 7 Home Premium Edition Windows Vista Business Edition => Windows 7 Professional Edition Windows Vista Ultimate Edition => Windows 7 Ultimate Edition Full Story: Rumor: three options for upgrading from Vista to Windows 7

View 9 Replies View Related

Options Windows Cannot APPLY Ok

Mar 23, 2008

I have Windows Vista with Windows Mail. When I click on Tools, a windows comes up and shows several tabs. I have gone to the Send tab to uncheck a couple of things I do not want operating. I notice that the window is quite large and I cannot see APPLY and OKAY. Consequently, I cannot have any of the options that I chose unchecked. Once I move out of the Options window, everything goes back the way it was. I thought I could minimize the size of the Options window, but no go on that. how I can get to Apply and Okay on this window?

View 5 Replies View Related

Windows Explorer Options

Mar 30, 2008

In XP I always use theWindows Explorer Details view and I could quickly sort files in ascending or descending order by Date. That was extremely helpful when copying and/or backing up files in one folder. However, in VISTA it seems as if I can only Group Files by Date. Am I missing something? Or can I actually sort files by DATE in ascending or descending order? Also, once I set up Windows Explorer the way I like it [Details View], how do I make that the default for all windows?

View 8 Replies View Related

When I Rebooted Windows Vista ( Home Premium ) Crashed To Continue

Jul 29, 2009

I turned DEP off by reading the vistax64 forum. when i rebooted, a big problem raised. windows vista ( home premium ) crashed to continue. i selected safe mode and other F8 choices...but still problem is there. then I used Vista DVD to repair startup...problem not solved. I used system restore...but not worked.

*_DELL_company_gived_a_choice_to_me...it_sets_all_required_windows_vista_files_and_folders_on_my_another_drive...how_can_i_boot_it_?_*
*__*
*_if_i_do_it,_so_i_can_keep_avoid_my_files_and_downloaded_programs_(_.exe_)_from_failed_windows_(_c:\_)_.___*
**
*_your_forum_website_is_best__*
*_thank_you_*
*_Arsham_Farahani_*
**
**

View 9 Replies View Related

Hard Drive Crashed, Find Inbox In Windows Mail

Mar 31, 2009

My computer crashed and I currently have my hard drive set up externally to copy the information off of it onto another computer. I was using Windows Mail that came with Vista on my old computer when it crashed. I've been able to salvage my data, but would like to find my messages stored in my Inbox in Windows Mail. I cannot open the program (Windows Mail) currently, but will be able to open it when my new computer arrives. For now, I'm copying needed files off my hard drive and storing them temporarily on my children's computer. I do not know what folders from Windows Mail, or Windows perhaps, that I need to save in order to hopefully open my saved inbox messages.

View 5 Replies View Related

How Can I Turn On My Computer: Possibly Software Controlled To Turn It Back On?

Feb 6, 2009

I have my Vista laptop (HP) hooked up to an external monitor, I have been using the sleep mode at night. The laptop is closed and on a shelf that is very hard to get to. I would like to shut it off at night. I can shut it off with the keyboard. Is there any way possibly software controlled to turn it back on? To reach the power button on the laptop you must first raise the lid which there is not room to do

View 9 Replies View Related

Windows Explorer: Folder Options 'Restricted'

Mar 6, 2009

I have a computer where I can't access the Explorer Folder Options (specifically the Folder and Search options under the Organize submenu.)

When I select it, I get an error message labeled 'Restricted.' The text reads "This option has been cancelled due to restrictions See your administrator."

However, I should point out that I DO still have admin priveleges. I can access any other menu or option. I can edit the registry, change the internet explorer options, use the group policy editor, whatever.

Most of the potential solutions I found relate to either a program changing the restrictions for Explorer folder options; but the associated registry entries where those restrictions would normally be 'keyed' are not present.

Editing the group policy (which by default is 'not configured') to 'disable' the 'Remove Folder Options' policy has no effect whatsoever. Editing the registry, adding keys, and then disabling them, also has no effect.

Using NOD32 and scanning in safe mode results in no infection found, and I'm not seeing the telltale signs of an infection (such as limiting my admin priveleges in other areas, like registry editing or using the control panel applets.)

Hijack this does not provide any clues; it all looks clean (with the exception of some leftover services from TuneUp Utilities, which I ended up cleaning out manually.) Cleaning this did not change the problem at hand.

Using a restore point from several days ago did not fix the problem. I could go further back but I don't even know when this problem began. Maybe as long as a month ago.

View 9 Replies View Related

Text Cut Off In Options Windows / Dialog Boxes

Feb 10, 2009

recently I've just been noticing a lot of text being cutt off at the end, or even cutt of vertically when it goes to a second line. I've posted about this on a couple other forums but had no success fixing it and my google searches aint produced much either. I thought this was just winamp messing up at first but then i noticed it in itunes as well and now i keep seeing it everywhere, in some webpages and a few other apps. Heres a few examples. A while back i had some problems with a load of fonts being deleted somehow so that vista started using some other ones instead. in the end i fixed this by copying all the missing fonts from my vista laptop over to my desktop. Dunno if this is what has caused my current prob but might have something to do with it.

View 6 Replies View Related

Windows Will Not Load After Power Blip

Jul 29, 2009

Windows will not Load After A Power company Blip. I had my bios set to load up to the state it was in before the power failed and came home to find I had a power outage and the screen showed one of the windows start up loading green dash scroll bars stuck in the middle. Safe mode no good. Boot to Vista disc and repairs cannot be made. Pulled ram sticks to check for bad ones and no go.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved