BIOS Setup Resetting To Factory Installation
Apr 9, 2009
I recently had a problem with my Dell Inspiron 1525 (System Event Notification Service error) and I had to use the function to return the system to its factory settings. I believe this involves using an OS image that's installed on a separate partition on the laptops hard drive. I followed the steps in the manual which involves using the F8 setup screen and selecting "repair your computer" and "system recovery options" and selecting restore factory settings or something to that effect. I selected this and after about 10 minutes a message appeared stating that the return to factory settings was successful. Per the instructions, I hit enter but after I did the computer went into a continuous loop of showing the bios screen and what sounded like trying to boot up and then back to the bios screen. It would continue doing this unless I hit the power button or pressed the F2 key or the F12 key. I hit F2 and noticed that the boot sequence had been changed to diskette drive as first and hard drive as second....
I guess I have the other option of reinstalling the operating system from the OS disk Dell provided but I'm wondering if that is the same as the restore to factory settings option? For example, are all the necessary drivers and other applications that were on the machine when it left the factory copied during installation? The manual says the OS image file on the hard drive has all the drivers and applications so I'd really like to go that route if I can but I do need some advice on how to fix this problem with the Bios looping.
View 5 Replies
ADVERTISEMENT
Apr 5, 2010
Since I upgrading my BIOS (Phoenix technologies) V1.7 to V1.8, I can no = longer access the BIOS SETUP UTILITY MENU. NOTE: the notebook is working fine, I can access the F2 boot and F8 = advance boot menu. When I press F10 I get the following;
Edit windows boot options for: Microsoft Windows Vista
Path:windowssystem32win load.exe
Partition:2
Hard Disk: 5c9d3909
ENOEXECUTE=3DOPTOUT
MODEL: ACER ASPIRE 5735-4774. Vista. HP. 32. SP2
I don=E2=80=99t have a backup, how to I get the SETUP UTILITY,=20. I want to upgrade to ultimate this is holding my back.
View 7 Replies
View Related
Sep 6, 2009
I've had this problem for 3 days now and googled all I can! I have come across people who have also had the same problem but found no conclusion to it! I have a Asrock MOBO, amd quadcore processor, 6gig ram....Basically when installing vista x64 it does everything perfect untill it gets too expanding files and it just stays there at 0%, first time I tryed it, it got to 22% and just stayed there... My HDD is IDE not SATA/SATAll does that make any difference? Or am I on the wrong tracks? I thought maybe my HDD wasnt set up right in the BIOs and tryed every setting and have the same effect.. I've build the PC myself
View 4 Replies
View Related
Oct 7, 2009
Ive come to a bit of a problem on my sister's Acer M1640. it had Vista home premium on it 32bit. she had a key logger hack one of her game accounts not sure which but anyhow, the pc didn't come with and CD's so im wanting to put Ultimate 32bit on with a new Product key. As she wants to start fresh.
basically the original CD DVD/RW drive was 1st coming up with "your CD doesn't have the correct drivers" i was thinking well hows that work when its in device manager and u can boot this CD to get to this stage o_O...............
View 6 Replies
View Related
Apr 21, 2009
I increased the RAM on my Compaq Presario SR2002X from 512M to 2G (both old and new are the same speed, PC2-4200). Both the BIOS Setup and the System dialog in the Control Panel show that they are using the new memory. As expected, a variety of things run faster now. In particular, all those security dialogs that come up and dim the desktop whenever you start some system maintenance process. They used to be slow to appear, but now they pop up almost immediately. Some programs start faster now -- the MSDN library displays almost immediately now, and it used to take about 30 seconds to initialize.
The surprise is that some things run slower. One thing that is particularly noticeable often occurs when entering text into a web page input area. With each keystroke, I can see the caret moving across the white background, but no characters appear. Sometimes I'll type in five or six keystrokes before it gets around to painting the characters behind the cursor. Another occurs with crossword puzzles displayed in Flash objects, such as the one in the daily L.A. Times. For these crossword puzzles, first you have to poke a puzzle-selection button; then it pops up a dialog with a choice of "regular" or "master" skill level. The pop-up used to display instantly; now there's a delay of about three seconds. Why would some things run slower after an increase in RAM??
View 4 Replies
View Related
Apr 2, 2010
Can anyone provide me with screen shots of how i should set up my bios for 64 bit as i have had issues and had to remove the cmos battery.
View 8 Replies
View Related
Sep 10, 2008
if someone could give me some guidance on the following problem. A few days back, it looked like I might have to reload Vista. When I put the supplied Vista DVD in the either of the 2 optical drives, the operating system appeared to boot up as normal from the hard disc. When I go into Setup, the boot order is as follows:-
1.CD-ROM
2.SONY DVD ROM
3.HARD DISK
This is a bit strange as the 2 optical drives that are fitted are
SONY DVD-ROM DDU1615.
SAMSUNG SH-S183 DVD/CD WRITER.
The SAMSUNG was fitted by the company I bought the pc from about 3 months after the purchase because the original SONY DVD Writer would only burn CD'S & not DVD's. The Sony was EIDE but the SAMSUNG is SATA. The Bios does'nt appear to give any details about the SAMSUNG drive so it seems its not been included in the list of boot devices & I do not know how to fix that.....
View 8 Replies
View Related
Aug 11, 2009
several programs wont run after installation they just give me a stopped running error
game programs wont uninstall
when games are installing wont show the background, it will ask for the cd key but after that the program exits but still installs but after it installs it wont run. programs like mozilla run with no problems the error that seems to occur a lot is
Setup.exe has stopped responding
i have unblocked all these programs from my firewall and everything all of these work on my other vista cpu
View 4 Replies
View Related
Oct 27, 2008
after installing vista the setup completes and a reboot is necessary so when windows is "starting for the first time" i sit there for about 5min then it loads winbeta again with an error message "setup is unable to start the installation" after it auto reboots winbeta now loads each time with an error that the computer was rebooted or that setup encountered an error and you must start over.
im running a dell 531 amd 64x processor 2gig stick of ram (removed 6gigs for the install) and a gt9800 graphics card no other sound cards or devices connected to the computer. i have tried to install 8 times now its getting very old!
View 8 Replies
View Related
Mar 12, 2009
I have been building computers for a while now and have not had any problems so far that I could not solve. Now I don't know where to start. I have purchased the following items:......Now when I try to install the vista 64 bit I get the famous BSOD! Mostly with the error message I stated in the title. I dont know what to do. Does anyone have any information for me?? ....65N Rast to disable the TBL patch in the BIOS in order for this to work. I do not know where to diable this patch on my mainboard. Do I need to update my BIOS? With what version??
View 5 Replies
View Related
Feb 25, 2009
Sometimes when I install drivers I get the message that my BIOS is out of date (including updates from AMD) if I go to the Phoenix site it says go to the motherboard manufacturer or run Biosagent if you use this you pay for the update but you do get this info so is it worth e-mail gateway support, using the boisagent or just leave well alone.
Info from biosagent
BIOS Type: Phoenix-Award
BIOS Date: August 18th 2006
BIOS ID: 08/18/2006-C51PVGM-GB-6A61HE1BC-00-None
BIOS OEM: C51PVGM-GB V1.0 081806 - 6.00 PG.............
View 5 Replies
View Related
Apr 28, 2008
I just recently finished upgrading my system from an nfroce 4 based Athlon 64x2 to a quad phenom 9850 with an amd 790fx based motherboard. So far it's all gone very well except one nagging issue. My media center can no longer record TV and my Zune player keeps throwing out error messages regarding media rights needing to be reset. After checking the event log I confirmed that Media Center is also unhappy with the current DRM situation, I guess
because the motherboard changed.
I've followed the steps outlined in this KB artical {url} but I've run into a snag. It points you to a website to update media rights but the site is broken, and I mean ompletely broken. All I get is a JS error saying invalid parameter, a generic MS gui and a continue button that is disabled and stays that way.
View 9 Replies
View Related
Jun 1, 2008
My brother has just built a computer and can't get it working. The problem is that when he starts it he gets to the screen where he can choose to enter BIOS. 9/10 times he can't do anything from there but 1/10 times he can press delete and then it says "loading bios" but it freezes there (he waited 30 mins nothing happened). Does anyone know what the problem mihht be?
View 9 Replies
View Related
Nov 1, 2009
Resetting settings to default?
View 3 Replies
View Related
May 15, 2010
how to get Windows to remember my modem settings. Every time I wake up or restart my computer I have to get Windows to reset my modem. This has only just started happening after I had help from Microsoft. They had me run a reset .bat to reset my services (in an effort to restart Security Center). It failed and I have since run Black Vipers "safe" settings and also turned off Media Center services. Microsoft help has left my computer in a worse state than it was before I went to them
View 9 Replies
View Related
Apr 24, 2008
My sisters PCz keeps going to sleep. I changed power options to never but each time she restarts the PC the settings go back to previous settings. i have looked around here for answers but nothing applies to her pc. all was fine before SP1 but i dont think that is the problem.
View 6 Replies
View Related
Jun 21, 2008
It seems many people have problems with Internet connections in Vista. I am one of them and have gone through all the discussions looking for a solution - nothing so far!! What seems to work is a script that automatically resets the adapter on
start up
View 5 Replies
View Related
Jul 29, 2009
I have an IMAP email folder. Every now and then (1-2 weeks), when I go into the folder, Windows Mail forgets all Mails in the folder, and immediately re-fetches the list. Then I need to re-download all the messages, either by clicking on them or by synchronizing the folder. As the number of messages is quite high, this takes a lot of time and is an annoyance every time it happens.
View 5 Replies
View Related
Apr 30, 2008
I have recently guided a friend on a new PC and set it up for him. I created his email account in Windows Mail but after a couple of days send/receive did not download emails though no error was shown, however they were viewable at the ISP's server. As the emails are still at the ISP's server they are not going into another folder. Deleting his account from Windows Mail and setting it up again allowed emails to download but this pattern has to be repeated on a regular basis. The new PC is a Dell 530S O/S Vista Premium, 2GB RAM. The Antivirus/Firewall is F-Secure. The ISP is BT in the UK. This problem never arose with Outlook Express on his old PC. Is there a known issue with Windows Mail that might be causing
View 6 Replies
View Related
Mar 26, 2009
I've tried resetting the local cache files - no change. Can't see any options on WinMail to "ignore your own posts". Windows Mail is version 6.0.6000.16386 (vista_rtm.061101-2205)
View 7 Replies
View Related
Jun 4, 2009
I have a general question re network settings under Vista Home Premium. On occasion, during busy times of the day, my cable modem will indicate that the connection is lost. If I manually unplug the power cable to the cable modem and router, wait until 15 or so seconds, and reconnect the cables, I can usually suceed in obtaining a connection. I assume the computer looks and finds a new address from my IP.
Under Vista, using cmd.exe (elevated), I tried ipconfig /renew but
received the following message - An error occured while renewing interface
Local Area Connection : unable to contact your DHCP server. Request has
timed out. [end quote]
View 9 Replies
View Related
Jul 15, 2008
I have a folder (on my desktop) and when I open that folder, I want to view the files inside that folder as small icons. So I open the folder, select View – small icons, then deselect “auto arrange”. Then I put the icons in just the order that I want them and everything is fine. I close the folder and re-open the folder, and the files are still displayed by icons and positioned just the way I want them. Great so far. But then the next day, when I open the folder, the folder is back to displaying the icons by “Details” and the files are back in the original order. Very annoying to say the least.
The files are MP3 for some daily listening, and after I listen to one, I want to move it down to the bottom. Then the next day I listen to the MP3 on top and then move that one down to the bottom. Worked fine with XP, but now with Vista, everyday the folder gets changed back to view by Details, and the files are back in original order. How can I keep Vista from automatically changing folder views back to Details and leave it on “Small icons (no auto arrange)”. I tried searching for the answer on the forum, but got an error that I don’t have permission to use the search function.
View 4 Replies
View Related
May 5, 2008
I recently downsized from three monitors and two video cards to two monitors and one video card. However, I have one program that keeps coming up on the third monitor even though there is no third monitor.
Does anyone know how to get that program to load on the main monitor?
You would think Microsoft would be smart enough to fix Vista so that it realized a monitor was now missing and open the programs on the default screen.
View 9 Replies
View Related
Jun 29, 2008
Blue Screen crash that dumps before resetting - according to the minidump its a WHEA_UNCORRECTABLE_ERROR, but it doesn't state which piece of hardware it is.
The dump file arguments are as follows:
Arg1: 0000000000000000, MCA_ASSERT
Arg2: fffffa8009785c6e, Address of WHEA_ERROR_RECORD structure
Arg3: 00000000b6200013, High 32 bits of MCi_STATUS MSR for the MCA bank that had
the error Arg4: 0000000000080a01, Low 32 bits of MCi_STATUS MSR for the MCA bank that had...........
View 7 Replies
View Related
Nov 16, 2008
I have two labtops, one (gateway) with Vista and one (compaq) with XP. Each one runs on a Netgear router and for the first few months I had the Gateway which I bought last December there were no problems. Around August I could get to the start page on Internet Explorer but when trying to get to another website my page loaded half way slowly on my usually fast connection then stopped, no error message no internet conection problem screen, just kept loading but couldn't load any farther. I've tried everything, updating Vista and McAfee, resetting Internet Explorer, deleting cookies and favorites as well as other internet files, scanning for spyware, othning works. Details: 2006 Gateway M-6816 model with Vista Home Premium 32-bit, wireless connection, Netgear router provided by Comcast, Internet Explorer 7.
View 8 Replies
View Related
Sep 19, 2008
I've been messing around in my BIOS. Installing some faster RAM and trying a slight overclock (2.4 t0 2.7Ghz on a Q6600) and seem to have caused myself several problems. Firstly I tried to push it a bit further on the FSB- from 1200 to 1300-the system wouldn't boot and wouldn't let me into the BIOS. I eventually got round this by removing the mobo battery. I was able to get back into the BIOS and revert to my original oc. However when I booted I got a re register Windows this is not a genuine version notice. I had to 'phone microsoft and get a new activation ID. I'm now back in windows (Vista HP 64 bit) but seem to have a few left over issues. My clock was set back to 2006 and that meant I couldn't activate Gmail etc. I went back into the BIOS and reset the date but could not change the day. So it's 3.19PM on Monday the 22nd of September, 2008. I've tried everything I can think of but cannot find a way to make it Friday, which it is.
Also I have Kaspersky Internet Security 2009. This keeps reporting that my computer is at risk and I need to update. I've updated over a dozen times but it doesn't seem to change and is still telling me it needs to update. These are ther first problems I have noticed. I hope I don't find more. Does anyone have any advice as to how to get my day and date correct and how to convince Kaspersky it's up to date?
View 1 Replies
View Related
Jun 25, 2008
Somehow my basic active windows text font changed. I think newly installed software may be to blame. Anyway, following the help suggestions of going to "Appearance Settings" and clicking on "Advanced" looks promising. However, for Windows Vista Basic, Standard, & Classic clicking on the Active Text within the Active Windows only get item Windows which does not allow me to set a font. Only a general color and a font color. I can't figure out how to reset the font. The font drop down list is empty and inactive.
View 9 Replies
View Related
Jan 15, 2010
To prepare for a dual boot installation (Vista / Ubuntu) I had to allocate space on my C-drive using Vista's 'Disk Management' and 'Shrink Volume' features. Unfortunately, in the process of making the allocation, I mistakenly allocated 40 MB instead of 40 GB. Went back into 'Shrink Volume' to correct the allocation but it apparently cannot increase space. Also tried 'Extend Volume', no luck there either (or maybe I just don't understand how it works). For what it's worth, here's my current C-drive allocations.
144.81 GB NTFS
40.00 MB Unallocated (reserved for Ubuntu) (this is what should have been 40GB)
75.29 GB Primary Partition
3.24 GB Primary Partition
9.49 GB NTFS
I should also mention that I already have Ubuntu installed, so this is actually a re-installation to solve a connection problem I'm having with Ubuntu.
View 3 Replies
View Related
Mar 23, 2008
i used advanced vista optimiser to give my laptop a good clean out as i do every week. but this time when i went to log on the diagnostic comes and says either change proxy settings or try resetting local connection setting. i tried resetting many a time which as done no good. web address bar states where its going but the diag box comes on again.so in the mean time while this is all going on a new tab keeps on opening by its self and saying the same thing,this started to happen before i cleaned my l.p but it was just redirecting to a blank page.
that is why i did the clean.anyhow resetting the lan did not work so i reset the internet expolorer in the tools on the bar. which as worked but the same thing is still happening with the tab ,but now its redirecting to all the freebiee sites and it will not stop. i have spyware-adware-trojan software on my l.p and still no good it did pick up 3 infections which it sorted out, its driving me f*&^%*ng nuts:mad::mad:
View 7 Replies
View Related
Jun 8, 2009
ok im tryimg to restore my dell inspiron 1525 laptop to factory settings.(also i run vista home premium 32bit). I have tried the f8 advancted options and people say i should see a command to restore to factory settings but it dosent show up for me. can anyone help me out
View 7 Replies
View Related
May 2, 2009
I have made a mistake and I am struggling to get out of this mess, I hope Shawn or someone who experienced this problem can help me out.
I was doing the Factory state recovery using Alt+F10 while booting in my Acer Aspire laptop, everything was fine until the "Acer Launch" window appeared. The last process Install eRecovery solution is not completing. The AL window just sitting in the middle of the screen and couldn't be moved. I tried to disable it from startup, msconfig window vanishes behind the Acer Launch window.
I think the cause of this problem is I forgot to create the 2nd(D: data) partition prior to starting the Recovery process.
My original set up was like this:
EISA hidden partition
C: system partition
D:data partition
I have deleted the D: partition and extended the C partition
I have created Recovery disc but I don't have Vista installation DVD as my machine is OEM version of Vista on it. I do have an Anytime upgrade DVD which came with the laptop when I bought.
View 9 Replies
View Related
