How many updates do you have in your installed list? I'm up to 132 this morning. It's been a week since I installed 32 bit after 64 bit SP2 install wouldn't boot. 32 bit SP2 went in last night and all is good.
View 8 RepliesI tried to install SP1 on Ultimate 32bit and it seemed to work -- got to configuring 3 of 3 100% then it said it failed and it proceeded to "revert changes". After this I re-booted and the Desktop came up, but because I had to disable all startup items and Microsoft services before I tried to install, I wanted to restore all this, so I clicked "Normal startup" in MSCONFIG. I re-booted and now Vista won't boot. The screen is dark for a couple seconds and the system re-boots to the BIOS screen. I have tried to use the Recovery DVD (which is OEM), and issue the "repair option" but it doesn't recognize Vista even after I load the drivers for the hard disk, hopwever, when I go to the command prompt, I can see the windows directory and issuing a "bootrec /scanos" returns c:windows. About the only option that will work on the repair menu is "repair". I have not tried this yet.
View 9 Replies View RelatedMy new laptop arrived this afternoon. I turned it on, it was working fine. I'm using Vista Home Premium. I installed CA Anti-virus software and after the installation my computer restarted. Since then, I haven't been able to get to the desktop. I get the BSOD with an arrow. After about 30 seconds displaying the BSOD, it automatically reboots and repeats the cycle continuously. I've tried F8 upon restart and chose last known configuration but I get the same BSOD. I also tried to get into safe mode but after choosing the option it goes back to the BSOD.....................
View 6 Replies View Relatedi've just installed XP pro 32x on my 70GB partition, and have Vista Ultimate 64x on my 160GB partition. I installed these myself and are custom OS's, im not sure if this has anything to do with the problem, but.. Once i installed XP, there was no options to boot into Vista. So in goes the Vista repair disk, and im back into Vista..and pretty soon id like to get back into XP ( My media centre, editing, creating videos, and playing games, and doing things non-vista compatable) but i dont want to have to recover my damn computer everytime. Btw ive tried other sites and forums before bothering you guys.
View 4 Replies View RelatedI installed service pack 3 and it had an error message. The screen will not allow windows to boot. for three days now it says reverting changes and stays there. It won't even boot into safe mode. What do i do? how do i even get past it to save my info and reformat?
View 4 Replies View RelatedHad vista & windows 7 dual booting & then i installed xp pro & lost my dual boot. How can i get it back?
View 9 Replies View RelatedMy vista keeps locking up after various amounts of time, no matter whether its just idling, or im making the computer work hard. As ive read on other topics, I think its a driver issue, but I just dont know what to do. I will try another fresh vista install tomorrow and get the vista updates quickly to see whether that helps the situation. I have ensured it isnt overheating like it did initially when I bought the system, and it is now a safe and low temperature in a running state. Also, it only detects 3.5Gb of the 4Gb of RAM I have in my system. PC Spec:
Ive re-installed, windows, and it froze after I installed the chipset driver. I contiuned, and found a sound driver wasnt digitally signed. However it still crashes. I have got the latest drivers for it. For it to crash, all i did was open recycle bin, from idle state.
I shouldn't be surprised but here goes....I checked today for SP1 on windows update.. According to my computer no updates available however updates were last installed on 03/13/08 and yet when you look at installed updates it shows a windows defender update installed today. I have been reading several posts on this problem and have noticed that Carey Frisch posted a link to troubleshoot and now here is a problem and that is none of these apply to me... Once again Go figure!! Running Vista Business 32bit here in the good old USA and of course the English versionVista is and has always been updated right on schedule....
View 9 Replies View Relatedlet me start this nightmare story i had just done a fresh restalled and spent hours on getting everything installed on pc all was fine working perfectly untill that is i installed vista service pack 1 from windows updates the update process crashed halfway through so i had the only option to restart my pc then came the blue screen of death and it metioned if you have any new hardware installed make sure all drivers are installed etc etc of course i know it wasnt hardware it was because of me restating my pc half way threw the service pack 1 and the full files not been installed threw the update process crashed was the reason for the blue screen but the blue screen had notes advising me to clear shadow memory in the bois and any other memory so i stupidly assumed this was channel mapping and bank mapping and put them all to zero please see jpeg of what i changed i basically disabled everything that was enabled and put all the mapping channels and bank channels to zero and now when i switch on my laptop i get a blank screen with no post no ...........
View 9 Replies View RelatedI went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
i can no longer boot up my computer as the boot/bcd file is miising or corrupt i found a windows artical on how to fix it and it didnt work ive also tryedd googleing the problem and got many results but none that seem to fit the problem or are helpful what can i do to solve this
View 9 Replies View RelatedI have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies View RelatedVista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
View 9 Replies View RelatedI built a new machine.Running Vista Home premium,8GB of Ram,Phenom11 3.2MHz.
I have 2 hard drives.First one portioned to C: and D:
Second HD portioned into D: and E: I have Vista on C drive.I would like to Dual Boot Vista with Windows7.
My question is do I need a Boot loader application or does vista have the ability to dual boot?
I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while.
I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there. I am running an ASUS P5E MB with Intel Quad 6600, 4Gig RAM, GeForce 8800GT and 2x250Gig HDs.
This is the best install I have ever done (or was)…I did a fresh install and followed a tweak which was to very enlightening, to say the least. From there I have been to a few other sites and moved on to fully customizing my desktop/login and……well…this is where I stuffed up…My BOOT screen no longer works properly, even with the original “winload.exe.mui” file replaced.
I downloaded and used “Vista Boot Logo Generator” I loved the results on my last install…It worked well. Upon deciding to do a fresh install with Tweaking in mind, I simply coppied over a Boot logo I made previously after allowing permissions and all that as well as changing the NO GUI in msconfig…ect….BUT......
i am new to this forum but i have problem with my system bootup. my system takes too long to boot and it started 3days ago. it takes about 120secs at bootscreen alone. i believe it is not my start up programs as it takes about 3 secs to start up from login page. i donot use any third party bootscreen. normally, my system boots in 30 secs but now i am facing a lot of problem which i do not understand. i have tried all the tutorials in this forum relating to bootup problems but found no luck.
View 6 Replies View RelatedXP is on 1st primary partition [active] and is old. Vista is on 2nd Primary partition and is new. Dual boot info, I believe, is all on the XP partition. Soon I will want to go to Vista only. Do I just delete the XP partition (after imaging it, of course!) and set
Vista partition to active? (Paragon Partition Manager). Will it then automatically boot into Vista (which has no boot.ini)?
I've had Vista x64 installed for about 2 full months now and I've recently begun having a lot of problems. One being: 187 seconds. What the hell? Before you ask, here are my specs. Lots of fast memory, a fast processor, 7200RPM boot drive (not listed), and ****ing awful performance. What gets me is that the delayed boot time is before I even see the "Welcome" screen.
My current boot time distribution:
1. BIOS does all its fancy stuff very quickly (about 6-7 seconds or so)
2. I get to my boot loader and it defaults to Vista after 5 seconds (dual-booting Vista/Ubuntu).
3. I then see the Vista loading screen (black screen with green loading bar) for about 4-5 seconds................
I need to do a CD/DVD Boot and I cannot find the option in the BIOS Boot Menu.
View 4 Replies View Relatedhp tool ask to do this "Then please go to using DOS system files column and add the link to where you stored the unzipped DOS boot up files. "so my question is , where can i get the "dos boot up files" for vista64? with the hp tool i need to locate the dos boot file address . so how do i do that? do i have to download vista64 boot files? every google links explains how to do this with xp. couldnt find any for vista. makes me feel like im the only person on the planet using vista.
View 4 Replies View RelatedI have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore.
I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed. I don't have Vista's DVD, and I'm trying to avoid installing XP again. If there's any way around...I would be gratefull! (Is there any way I can edit bcdedit.exe in XP?)
I was running dual boot fine between XP and Vista now im running both Vista it only reads my newly installed drive on boot and i have no boot options as you do in XP/Vista installs, im a newbie to dual drives and was wondering how to set it to have boot options now!
View 5 Replies View RelatedI searched all over the internet for this simple (I think) problem, but I couldn't find any solutions. I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed.
View 5 Replies View RelatedI once read a post about a boot menu reappearing on every boot. Did a seach on google and found as the 10th result the post I needed (i recognised the text in the preview shown). Search on google 'site:www.microsoft.com boot menu'Found:But......that thread no longer exists. Also I cannot find that post again.With this post result? With a boot menu reappearing?
View 4 Replies View RelatedIn November I upgraded my system with Vista Ultimate. When it was returned to me I followed each prompt and did everything during installation it asked of me. Now 5 months later is states that I need to validate. I guess whatever was running on my system was temporary. Does anyone know that if I purchase a new product key this will solve my issue or do I have to purchase a full version? If I do have to purchase a full version can it be installed over my already installed and running vista on my system?
View 9 Replies View RelatedI have a HP pavilion laptop which came with 64 bit vista ultimate pre-installed. I shrinked the OS partition (160 GB), created new partition (40 GB) for 64 bit windows 7 ultimate. After installation of Windows 7, I cannot see the vista ultimate boot option when I boot my PC. When I boot into Windows 7, I still can see the vista partition. But instead of C: it is now displayed as E: I used the HP Recovery Disc to repair windows vista but I can only see a blank blue screen with the mouse pointer. How can I recover the vista?
View 9 Replies View RelatedThe other night I was in a rush and I held down the power button until it shut off. the next day I tryed turning it on and after the MB homepage came up for 3 secs on the top left hand corner of the screen it said "Disk boot failure, please insert boot disk and press enter" so i fooled around with the priority settings a little bit and nothing worked. I then inserted the windows vista CD and it would say "Loading windows files" then the loading bar came up and it would always freeze at the same point and after about a minute a blue screen came up saying a problem occured and is shutting off the computer to prevent further damage. Iv tryed everything. could my hard drive be damaged or something? Please someone help me. I cant work with much because i cant even get into windows! :-( All i can work with is the Setup menu
View 9 Replies View RelatedI bought a new pc for my work which has all the bells and whistles. Of course the kids want access to the pc so that they can play the latest games. I prefer not to install any games on the pc. I have a couple of
licenses for both Vista Ultimate and XP Pro. Is there any way to install either Vista or XP on a USB drive and install their games on that. When they want to play, they can just boot their drive off USB, making use of the hardware on my pc?
We just bought 2 Toshiba Satellites A200, both run Vista Home Premium. Now one does not boot. Some of the screen messages read:
"Windows Error Recovery"
"Windows failed to start."
"Launch repair (recommended)"
When we click Launch repair the screen goes to Windows Boot Manager and it reads:
"Windows has encountered a problem communicating with a device connected to
your computer.
This error can be caused by unplugging a removable storage device such as an external usb drive while the device is in use, or by faulty hardware such as a hard drive or cd-rom drive that is failing. Make sure any removable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer.......