I bought a new pc for my work which has all the bells and whistles. Of course the kids want access to the pc so that they can play the latest games. I prefer not to install any games on the pc. I have a couple of
licenses for both Vista Ultimate and XP Pro. Is there any way to install either Vista or XP on a USB drive and install their games on that. When they want to play, they can just boot their drive off USB, making use of the hardware on my pc?
I've had Vista x64 installed for about 2 full months now and I've recently begun having a lot of problems. One being: 187 seconds. What the hell? Before you ask, here are my specs. Lots of fast memory, a fast processor, 7200RPM boot drive (not listed), and ****ing awful performance. What gets me is that the delayed boot time is before I even see the "Welcome" screen.
My current boot time distribution:
1. BIOS does all its fancy stuff very quickly (about 6-7 seconds or so)
2. I get to my boot loader and it defaults to Vista after 5 seconds (dual-booting Vista/Ubuntu).
3. I then see the Vista loading screen (black screen with green loading bar) for about 4-5 seconds................
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
View 9 Replies View RelatedI am trying a new install on a new machine. I have 2 WD 250 GB drives (not in RAID config). When VISTA installs it tells me the first drive is not recognized as boot drive and won't load. I tried to install on second drive and get a error message about a volume does not meet VISTA criteria (or something like that)and won't install. These are both brand new drives. Both drives are correctly identified in the BIOS.
View 7 Replies View RelatedRight now i am booting off of an 80gb IDE hard drive but i want to clone the drive onto a 150gb sata drive and make the sata drive my boot drive. I have used Acronis True Image to clone the hard drive. I restarted and everything copied over in DOS successfully but then i tried to boot off of the sata drive and everything seemed to work out fine.. Vista load bar showed up, i was able to enter my password to log in and then it said preparing desktop like it was the first time i installed vista. It was stuck on that screen for a few mins and then a blank blue screen just came up. it seemed like it was the default background for Windows 2000 or something like that and it just stayed there. So now i'm back to booting off of the IDE drive...
View 5 Replies View RelatedI have a dual boot system: XP PRO on drive C and Vista Home Premium on drive B. I want to replace my hardrive, and move (or clone) Vista to new drive and be it C drive. Vista is still virgin and not other programs are installed, so changing it location from D to C drive will not influance any applications. I know how to create hard drive image. My question is how to make that new c drive with Vista on it bootable again. Is there any utility I can use?
View 4 Replies View Relatedi can no longer boot up my computer as the boot/bcd file is miising or corrupt i found a windows artical on how to fix it and it didnt work ive also tryedd googleing the problem and got many results but none that seem to fit the problem or are helpful what can i do to solve this
View 9 Replies View RelatedI have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies View RelatedI got a new system (AMD Athlon Dual Core, 3GHz, Vista Home Premium, 500GB SATA HDD), installed a new SATA drive (250GB), and installed WinXP on the new drive (I undid all the cable to the Vista drive first). Now, I can boot off Vista or XP, but the default system is XP. I have to go to the Boot menu to bring Vista up. Is there a way to set the Vista drive as the default drive? Can I simply switch the drive cables? The jumpers no longer do Master/Slave, so I'm not sure on this. (BTW, when I boot up in Vista, and use a boot up controller program like Easy BCD, it does not show XP as a boot option).
View 5 Replies View RelatedYesterday morning Vista, wouldn't boot I was promped to use safe mode, last known good configuration etc. Would not start in safe mode or last known good configuration. I finally got the repair from CD to corme up ran repair after 30 minutes or so got message found 0 problems 0 fixed scrool down for details reasion repair failed couldn't find C drive. I later got into safe mode and opened Excel trying to save a work book. couldn't save anthing from safe mode Hard drive light is on. how to boot from C on hard drive?
View 6 Replies View RelatedI have 3 HDDs in my PC (don't ask why!). The boot/system drive is connected to SATA port 0 and is set in the BIOS as the first boot device. When I run the Windows Vista install DVD, I get a different HDD as 'Drive 0', the device I want as the Boot/system drive is set as 'Drive 2'. The only way I can install to Drive 0 is to disconnect the other two drives prior to installing.
This wasn't a problem with Vista RTM disc, but since SP1 I've had this problem. And the same now with Windows 7! Strange problem, any ideas? It's not the end of the world but a weird problem all the same.
I have Vista installed on my computer but, I want to update my bios for my motherboard and would like a create a bootable USB drive to do this instead of using a floppy drive. Does anyone know if this would work and if so how would I create the startup drive?
View 5 Replies View RelatedI have two hard drive on the same pc. XP on the c drive. I attempted to install Vista on the second drive (300G partitioned to 200 and 100 G with vista on the former). upon rebooting I got a message from windows boot manager saying the File:windowssystem32winload.exe is missing with a status: 0xc000000e.
So, another reboot I get the choice of Earlier version of window or Microsoft windows vista. clicking on the former brings me to the screen with win xp logo and stays there without any futher move. Clicking on the vista it circles back to the same page. Now I can't even get to my XP.
I have 3 Different Windows operating systems on one computer that are across 2 separate hard drives. My PROBLEM:
I need guidance as to how to find which drive contains the boot info as well as how to change AND move the Master Boot Record.
Tools currently at my disposal:
1) 2 blank 640gig HD's that I can install if anything needs to be shuffled around.
2) Acronis True Image 2009 that can add or clone disk as well as pretty flexible backup options.
3) System Mechanic 8 which I believe can boot from CD and be used to configure HD's
4) Nero 8 if I need to burn any .ISO boot disks.
5) I only have the Vista 64 bit disk available - the other disks were puppy food.
i am running Windows Vista Ultimate 32 bit on a custom built PC (Info at bottom). The problem is that there was an issues with the PC and some OS files were corrupted causing problems with Vista. I have tried to load the vista install boot DVD to do a system restore or a clean install of vista but for some reason it cannot boot from the dvd drive. Now i have tried everything i can think of. I have changed the priorities of the boot devices so it boots the DVD drive first however it seems to just ignore it. the drive powers up and reads and whatnot but it doesnt boot the cd it just loads from the HD.
When i remove all the boot list items and leave just the DVD drive as the boot option i get a screen saying insert boot media/disk and press any key to continue. Upon doing that the message just appears again. I have checked the hardware. everythings connected properly and tightly. I even stripped the system down to only the Mobo, CPU, Video Card, HD and dvd drive are in and still nothing. I have installed Vista from this cd on another machine and on 2 different hard drives in this machine in the past. 1 install was about a week ago. i have even tried using a windows XP boot disk and still it doesnt boot from the dvd drive. The DVD drive works perfectly with no problems when the OS is running. I can read and burn cd/dvd and play music and games on it. Recognizes it as a vista install disk as well when the os is running.....
i wish everything was as easy as they say. Insert your windows vista CD and go from there. My problem is that my PC will neither boot from CD or Floppy Drive. i can to rebuild the bootmgr?
View 4 Replies View RelatedI have vista Pro on a software raid and and mow installing a larger hardware raid card. What is the best software to clone my old drives onto the new ones, without errors or errors on system files? If it's freeware, that's great. Please bear in mind that if the solution involves rebooting to a DVD, then it will have to load the RAID driver in order to see the source drives.
View 4 Replies View RelatedVista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
View 9 Replies View RelatedI built a new machine.Running Vista Home premium,8GB of Ram,Phenom11 3.2MHz.
I have 2 hard drives.First one portioned to C: and D:
Second HD portioned into D: and E: I have Vista on C drive.I would like to Dual Boot Vista with Windows7.
My question is do I need a Boot loader application or does vista have the ability to dual boot?
I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while.
I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there. I am running an ASUS P5E MB with Intel Quad 6600, 4Gig RAM, GeForce 8800GT and 2x250Gig HDs.
This is the best install I have ever done (or was)…I did a fresh install and followed a tweak which was to very enlightening, to say the least. From there I have been to a few other sites and moved on to fully customizing my desktop/login and……well…this is where I stuffed up…My BOOT screen no longer works properly, even with the original “winload.exe.mui” file replaced.
I downloaded and used “Vista Boot Logo Generator” I loved the results on my last install…It worked well. Upon deciding to do a fresh install with Tweaking in mind, I simply coppied over a Boot logo I made previously after allowing permissions and all that as well as changing the NO GUI in msconfig…ect….BUT......
i am new to this forum but i have problem with my system bootup. my system takes too long to boot and it started 3days ago. it takes about 120secs at bootscreen alone. i believe it is not my start up programs as it takes about 3 secs to start up from login page. i donot use any third party bootscreen. normally, my system boots in 30 secs but now i am facing a lot of problem which i do not understand. i have tried all the tutorials in this forum relating to bootup problems but found no luck.
View 6 Replies View RelatedXP is on 1st primary partition [active] and is old. Vista is on 2nd Primary partition and is new. Dual boot info, I believe, is all on the XP partition. Soon I will want to go to Vista only. Do I just delete the XP partition (after imaging it, of course!) and set
Vista partition to active? (Paragon Partition Manager). Will it then automatically boot into Vista (which has no boot.ini)?
I need to do a CD/DVD Boot and I cannot find the option in the BIOS Boot Menu.
View 4 Replies View Relatedhp tool ask to do this "Then please go to using DOS system files column and add the link to where you stored the unzipped DOS boot up files. "so my question is , where can i get the "dos boot up files" for vista64? with the hp tool i need to locate the dos boot file address . so how do i do that? do i have to download vista64 boot files? every google links explains how to do this with xp. couldnt find any for vista. makes me feel like im the only person on the planet using vista.
View 4 Replies View RelatedI got my laptop with Windows Home Premium x32. When I upgraded it to Ultimate, now whenever I start up my laptop, it always starts out by showing the HP logo, then it says, "Resetting boot drive...." then a bunch of other crap afterwards.
View 9 Replies View RelatedI have a dual boot system - XP on the boot drive and Vista on a slave drive. The boot drive is failing (clicking on boot and often preventing the computer from passing the bios splash screen). The Vista install modified the boot header on the XP boot drive. This means that I cannot just buy a new boot drive and install XP on it because the boot information allowing for dual boot will need to be re-written to it. How do I do this?
Is it possible for me to make a backup of the dual boot information installed by Vista so that when I replace the boot drive I can copy at least some parts of the information to the boot drive? Will I have to reinstall both XP and Vista on the slave drive? It has taken me ages to get a stable Vista install on the legacy mobo and I have finally managed it - I wouldn't want to reinstall Vista from scratch
just because the boot drive which contains XP and the dual boot information is dying.
I've configured my system to dual boot into Vista64 (OEM) and Vista86 (retail) on the same drive - 2 separate partitions in a raid 0 configuration.
Vista64 partition: is used exclusively for music recording with 64 bit software only - yes they do exist, I use Sonar.
Vista 86 partition: is for general computer use: Internet, email and such.
I understand that vista64 runs both 64 and 32 bit applications well enuf, I simply want to keep both uses apart from one another - thus my reason for a dual boot.
... so here's my question :^) Has anyone done this before, on a raid 0 using two instances of Vista? If so, could you tell me how well it's worked for you?
...also, concerning the "pagefile.sys". Since I have both vista's on the same drive in separate partitions and vista doesn't like running two pagefiles on the same drive. Should I move one to a second drive? If so, which should I move the x64 or the x86. Maybe both, eh?
I have a "storage" drive (seagate sata 3.0gb, 320gb) with lots of files which was previously used (as a storage drive) with my xp pro 32 install, and after that, with my linux system via fuse+ntfs-3g. This drive is mountable in linux still, and all files appear to be intact. I would like to share this storage drive between my dual boot Vista
Ultimate/Debian Etch (both 64) system, but if it is connected while trying to boot vista, vista will stop after the "loading" screen, and rest eternally on a black screen, before any welcome logo or logon screen.Without this drive connected, vista boots fine. Without my linux drive connected, and with the storage drive connected, vista still will not boot. Vista even sees my linux drive and all its partitions, but will not boot
with the storage drive attached. I've tried booting and *then* connecting the drive, but it doesn't show up anywhere at all (my computer, device manager, disk management).I've searched EVERYWHERE for the last several months (ever since i bought vista near the end of september '07) and have found absolutely Zero clues as to why this is happening or how to fix it.