I have a "storage" drive (seagate sata 3.0gb, 320gb) with lots of files which was previously used (as a storage drive) with my xp pro 32 install, and after that, with my linux system via fuse+ntfs-3g. This drive is mountable in linux still, and all files appear to be intact. I would like to share this storage drive between my dual boot Vista
Ultimate/Debian Etch (both 64) system, but if it is connected while trying to boot vista, vista will stop after the "loading" screen, and rest eternally on a black screen, before any welcome logo or logon screen.Without this drive connected, vista boots fine. Without my linux drive connected, and with the storage drive connected, vista still will not boot. Vista even sees my linux drive and all its partitions, but will not boot
with the storage drive attached. I've tried booting and *then* connecting the drive, but it doesn't show up anywhere at all (my computer, device manager, disk management).I've searched EVERYWHERE for the last several months (ever since i bought vista near the end of september '07) and have found absolutely Zero clues as to why this is happening or how to fix it.
If you are like me and have a NAS device on your network that is not compatible with Windows Vista, now you can tweak Windows Vista to make it work again. You do not even have to wait for your device manufacturer to release a new firmware any more! Just follow these steps below:
Click on the Start Button and key in secpol.msc in the search box and hit Enter.
When the Local Security Policy editor has loaded, expand Local Policies and select Security Options.
Scroll through the list and locate "Network Security: LAN Manager authentication level." Right click on this setting and select Properties....
I have a Ultimate 64 PC with a USB hard drive attached, a new problem has come up, hopefully someone can help me fix it.
When I start my PC; Windows is asking me what I want to do with the Drive, open the pictures, play the music, open it to view the content etc, it's as if I have just attached the drive.
This is really mysterious. I have an external 2.5" USB drive and for god's sake I cannot safely remove it from my Vista ultimate 64bit system! I copied something on it and I am quite sure, that safely remove is good to do, because I use such drives for some time already and I already lost some files when it was not done (my computer froze something)! Process explorer shows nothing when I search for my drive letter. I tried some unlocker utility, but it does not make it's context menu.maybe after restart it will :- I disabled indexing for fast search on this drive, but nothing changed.Maybe system restore?.
When I pop a USB storag drive (250mb) into any USB slot (either an original one on the PC or off a hub) it pops up on my computer as Removable Drive (J), but when I click on Drive J I get ' Please insert a disk into Removable Disk (J) - it won't allow me to format it wither. Anything I can do to get it going or is it a gonner?
I've had Vista x64 installed for about 2 full months now and I've recently begun having a lot of problems. One being: 187 seconds. What the hell? Before you ask, here are my specs. Lots of fast memory, a fast processor, 7200RPM boot drive (not listed), and ****ing awful performance. What gets me is that the delayed boot time is before I even see the "Welcome" screen.
My current boot time distribution: 1. BIOS does all its fancy stuff very quickly (about 6-7 seconds or so) 2. I get to my boot loader and it defaults to Vista after 5 seconds (dual-booting Vista/Ubuntu). 3. I then see the Vista loading screen (black screen with green loading bar) for about 4-5 seconds................
I've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
I am trying a new install on a new machine. I have 2 WD 250 GB drives (not in RAID config). When VISTA installs it tells me the first drive is not recognized as boot drive and won't load. I tried to install on second drive and get a error message about a volume does not meet VISTA criteria (or something like that)and won't install. These are both brand new drives. Both drives are correctly identified in the BIOS.
Right now i am booting off of an 80gb IDE hard drive but i want to clone the drive onto a 150gb sata drive and make the sata drive my boot drive. I have used Acronis True Image to clone the hard drive. I restarted and everything copied over in DOS successfully but then i tried to boot off of the sata drive and everything seemed to work out fine.. Vista load bar showed up, i was able to enter my password to log in and then it said preparing desktop like it was the first time i installed vista. It was stuck on that screen for a few mins and then a blank blue screen just came up. it seemed like it was the default background for Windows 2000 or something like that and it just stayed there. So now i'm back to booting off of the IDE drive...
I have a dual boot system: XP PRO on drive C and Vista Home Premium on drive B. I want to replace my hardrive, and move (or clone) Vista to new drive and be it C drive. Vista is still virgin and not other programs are installed, so changing it location from D to C drive will not influance any applications. I know how to create hard drive image. My question is how to make that new c drive with Vista on it bootable again. Is there any utility I can use?
I installed an update today (USB composite device dc3d) and it changed my DVD RW drive from "hard disk drive" to "devices with removable storage" I think DVD RW drives are supposed to be classified as "devices with removable storage" I was wondering if this #1 Matters #2 is correct #3 will cause any problems. Any thoughts? What does your "my computer" view show your DVD RW drive type as.
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
I bought a new pc for my work which has all the bells and whistles. Of course the kids want access to the pc so that they can play the latest games. I prefer not to install any games on the pc. I have a couple of licenses for both Vista Ultimate and XP Pro. Is there any way to install either Vista or XP on a USB drive and install their games on that. When they want to play, they can just boot their drive off USB, making use of the hardware on my pc?
it only happens when sending pictures from my work email addy to my home computer. RE: Emailng jpg pix 100kb or less from work that has Windows 2000 with Outlook 2003 to my personal email addresses on my home computer (Vista) with Comcast & Yahoo.If I email pictures from my work email addy (either attached or inserted into the email body) to my personal email addy and hope to see them on my home computer using Windows Mail with Comcast, the email comes in without the attached or inserted picture and there is no message that there was a problem. I made sure I'm on the safe list and not on the blocked list. When I am at work and open Comcast email on the internet, the attachments are with the emails and open fine. When I am at home and open Comcast email on the internet instead of via Windows Mail, there are no attached or inserted pictures. When at home, the same emails with attached photos sent to my Yahoo email are delivered and open fine.
Windows Vista Premium. I'm able to select a Photo in Windows Photo Gallery and click Email which attaches the photo to a blank email. I can then fill in the Address and words...and send it. But.....I can't seem to Create the email, then click the "attach paper clip icon" and open Windows Photo Gallery to select the photo for the attachment. I'm sure it's obvious I'm not very sharp with this stuff but I'm hoping someone can give me a simple method to do this. All else seems to work OK with Vista and Windows Vista Mail.
I got a new system (AMD Athlon Dual Core, 3GHz, Vista Home Premium, 500GB SATA HDD), installed a new SATA drive (250GB), and installed WinXP on the new drive (I undid all the cable to the Vista drive first). Now, I can boot off Vista or XP, but the default system is XP. I have to go to the Boot menu to bring Vista up. Is there a way to set the Vista drive as the default drive? Can I simply switch the drive cables? The jumpers no longer do Master/Slave, so I'm not sure on this. (BTW, when I boot up in Vista, and use a boot up controller program like Easy BCD, it does not show XP as a boot option).
Yesterday morning Vista, wouldn't boot I was promped to use safe mode, last known good configuration etc. Would not start in safe mode or last known good configuration. I finally got the repair from CD to corme up ran repair after 30 minutes or so got message found 0 problems 0 fixed scrool down for details reasion repair failed couldn't find C drive. I later got into safe mode and opened Excel trying to save a work book. couldn't save anthing from safe mode Hard drive light is on. how to boot from C on hard drive?
I have 3 HDDs in my PC (don't ask why!). The boot/system drive is connected to SATA port 0 and is set in the BIOS as the first boot device. When I run the Windows Vista install DVD, I get a different HDD as 'Drive 0', the device I want as the Boot/system drive is set as 'Drive 2'. The only way I can install to Drive 0 is to disconnect the other two drives prior to installing.
This wasn't a problem with Vista RTM disc, but since SP1 I've had this problem. And the same now with Windows 7! Strange problem, any ideas? It's not the end of the world but a weird problem all the same.
I have Vista installed on my computer but, I want to update my bios for my motherboard and would like a create a bootable USB drive to do this instead of using a floppy drive. Does anyone know if this would work and if so how would I create the startup drive?
I have two hard drive on the same pc. XP on the c drive. I attempted to install Vista on the second drive (300G partitioned to 200 and 100 G with vista on the former). upon rebooting I got a message from windows boot manager saying the File:windowssystem32winload.exe is missing with a status: 0xc000000e.
So, another reboot I get the choice of Earlier version of window or Microsoft windows vista. clicking on the former brings me to the screen with win xp logo and stays there without any futher move. Clicking on the vista it circles back to the same page. Now I can't even get to my XP.
I have 3 Different Windows operating systems on one computer that are across 2 separate hard drives. My PROBLEM:
I need guidance as to how to find which drive contains the boot info as well as how to change AND move the Master Boot Record.
Tools currently at my disposal: 1) 2 blank 640gig HD's that I can install if anything needs to be shuffled around. 2) Acronis True Image 2009 that can add or clone disk as well as pretty flexible backup options. 3) System Mechanic 8 which I believe can boot from CD and be used to configure HD's 4) Nero 8 if I need to burn any .ISO boot disks. 5) I only have the Vista 64 bit disk available - the other disks were puppy food.
i am running Windows Vista Ultimate 32 bit on a custom built PC (Info at bottom). The problem is that there was an issues with the PC and some OS files were corrupted causing problems with Vista. I have tried to load the vista install boot DVD to do a system restore or a clean install of vista but for some reason it cannot boot from the dvd drive. Now i have tried everything i can think of. I have changed the priorities of the boot devices so it boots the DVD drive first however it seems to just ignore it. the drive powers up and reads and whatnot but it doesnt boot the cd it just loads from the HD.
When i remove all the boot list items and leave just the DVD drive as the boot option i get a screen saying insert boot media/disk and press any key to continue. Upon doing that the message just appears again. I have checked the hardware. everythings connected properly and tightly. I even stripped the system down to only the Mobo, CPU, Video Card, HD and dvd drive are in and still nothing. I have installed Vista from this cd on another machine and on 2 different hard drives in this machine in the past. 1 install was about a week ago. i have even tried using a windows XP boot disk and still it doesnt boot from the dvd drive. The DVD drive works perfectly with no problems when the OS is running. I can read and burn cd/dvd and play music and games on it. Recognizes it as a vista install disk as well when the os is running.....
i wish everything was as easy as they say. Insert your windows vista CD and go from there. My problem is that my PC will neither boot from CD or Floppy Drive. i can to rebuild the bootmgr?
I have vista Pro on a software raid and and mow installing a larger hardware raid card. What is the best software to clone my old drives onto the new ones, without errors or errors on system files? If it's freeware, that's great. Please bear in mind that if the solution involves rebooting to a DVD, then it will have to load the RAID driver in order to see the source drives.
When I try to open a file (Word, Excel, pdf) directly from Windows Mail without saving the file, the associated program opens then I get an error message saying that the file C:WindowsSystem32 could not be found.
I uninstalled Microsoft office 2007 and after that I noticed that although the resolution of my laptop display is adjusted to maximum at 1280X800 but the icons appear a little blur at their edges and the messages boxes that open do not show all the matter and commands that are there (screenshot attached).
I have scanned my window’s registry and also I have checked all the files with scannow option but nothing was found wrong anywhere and also all the drivers are working properly. But I cannot change the resolution by any means and my problem remains the same.
I am trying to attach pictures to an outgoing email and they are inserting into the email way too large. Is there a solution to this? I have tried using Microsoft Picture Gallery and creating an email that way, but it won't let me. Outlook had a "wizard" for pictures so it was really easy.
I have Vista and of course the viewer as Windows Photo Gallery. Suddenly and without any apparent reason I can not open pictures attached to newsgroup messages with Windows Photo Gallery. The photo is visible in the body of the message, is saved where I want but when I try to view it the Windows Photo Gallery tells me this: "Could not find file xxx.jpg verify that the file name is correct and try again"
