File Back Up Operation Widows Error
Dec 24, 2008
I have three problems which result in the 0x80071a91 error message and seem to be related to transaction support/resource manager. I found several KB articles and comments in this and other forums and tried the various fixes - none work - each is a pre-SP1 fix. My Vista system is: Factory Installed Vista Home Premium 64 bit SP1 with all updates on Gateway 4 core processor and less than three months in use.
PROBLEMS:
1) Attempting to run Backup at the point where the settings are to be saved. KB 939615 - Cannot change the settings for a file backup operation or use the Windows Task Scheduler to change the defrag schedule in WIndows VIsta. Transaction Manager Fix - 0x80071a91 error. Recommended fix is: fsutil resource setautoreset true c:
2) Attempting to delete a task Transaction support within the specified file system resource manager is not started or was shutdown due to an error. (0x80071A91)
3) Attempting to link to on-line error message from the event viewer. Clicking on "on-line event" closes the event manager snap-in
Msesage: Unhandled Exception in Managed Code Snap-n - HRESULT 0x80071A19. "This snap-in performed a non-valid operation and has been unloaded- Exception type: Syustem.Runtime.Interop.Services.comexception - HRESULT 0x80071a91."
A fourth problem may or may not be related - when I try to start Wsearch (Windosw Indexing Services) it stops within 3-5 seconds with the error msgs - 0x80040d23, 0x8007007e (VSS) finally 0x80071a91.and Events ID 1008, 1015, 1004 and 1008.
View 6 Replies
ADVERTISEMENT
Feb 19, 2008
I have just reinstalled Vista Ultimate64 and for some very strange reason the D drive is listed as the system drive and the C drive is where Windows is isntalled (obviously). If I unplug the D drive while Windows is running it has no problems but if I restart it gives the boot error, please insert system disc. Plug D back in and it boots fine. My question is, is there anyway to fix this without having to reinstall Windows again?
View 4 Replies
View Related
Oct 11, 2008
I had just installed Warhammer Online and everything was going well. The following day after i had finished gaming i logged off. From there i was about to click the little red shut down button but it was unclickable. After some time i just released the battery from the back. To see if everything was ok i tried turning it on again and it said Windows Error Recovery. It gave me 2 options, Startup Repair Which was recommended and normal startup. I clicked startup repair but when i did the screen went black and brought me straight back to Windows Error Recovery. No matter how many times i click repair it doesnt work. If i click normal start it just Brings me to the screen where it says Microsoft and there a little green bar flashing over and back as if loading. After some time it goes black and i have to remove battery to turn it off.
View 9 Replies
View Related
Sep 21, 2009
Can (2) separate Contact Folders be set up in Widows Mail...
I would like to be able to have (2) separate folders with the ability to import addresses to each and be able to switch back and forth.
View 9 Replies
View Related
May 9, 2009
I've been using Windows live mail for some time now and I like it, it works great!! I've ad it set-up to read all in one place all my different e-mail accounts, I've got 3 hotmails, one g-mail and another different one. I just changed my Laptop, still got my old one as a back-up, and WLM was already installed on it and it's a newer version then what I ad, the latest version I think. I would like to know how can I import all my contacts, all my different e-mail accounts set-up, my save e-mails, etc without having to start all over again and enter everything manually, because I've got a lot of stuff in there.
View 4 Replies
View Related
Mar 23, 2008
When I attempt to utilize the back up function in Vista, I receive an error message: 0x80041321. It will not let me continue. How can I rectify?
View 5 Replies
View Related
Mar 23, 2008
I'm having difficulty putting photos and files on this computer. The discs were burned on my old PC which was running XP. When i try to access the files on the CD to put them back on my New PC it keeps crashing. Why is this happening? They work just fine on my old PC and my friends PCs. Im very frustrated. Is this something to do with Vista not being backwards compatible?
View 4 Replies
View Related
May 28, 2008
Vista 64 ultimate updated or something and I lost quick launch, my back ground picture and most importantI go to open outlook 2007 and it says I don't have permission for my .pst file so I FINALLY rolled back to the 23 last night and it fixed it. Then when I got up this morning it auto updated and it went back to the way it was except I lost the 23rd as a rollback option to auto update so tryed next oldest the 25th but that did not work. ALSO MY FILES ARE LOCKED OUT i TRY AND GO TO PROPERTIES AND GIVE MYSELF, A ADMINISTRAOR, PERMISSION AND IT STILL WON'T LET ME ACCESS them. Oh I am running service pack 1 with a gig of ram a raptor for OS and a 320GB for Data Music Etc. on a new p35 giga-byte board I got 6 months ago. I was just going to reload but afraid I would do it for nothing.
View 4 Replies
View Related
Mar 23, 2008
My elderly Mother's Vista PC isn't working, and as she relies on this for shopping etc I need to get it working (I am several hundred miles from her). The PC tried to install the latest Vista updates (20/2/2008) but upon restart she gets the message "Windows failed to restart - a recent hardware/software change may be the cause - File windowssystem32winload.exe "The selected file could not be loaded". She doesn't have a start in "normal mode" option. I have walked her through trying system repair/restore using the Vista installation Cd, but after trying to restore she gets the message; "system restore failed due to an unspecified error; "cannot create a file when that file already exists" (0x800700b7) We have tried 3 different restore points with the same result.
View 9 Replies
View Related
Apr 24, 2008
As I have been writing on here before. I am trying to clean it up and get some more space. How in the world do you see what is on there???? I have been all over my computer and deleted a lot of junk files, but not gaining much space back. What is on this thing----where is the list of what is there???
View 4 Replies
View Related
Apr 11, 2008
I hope I'm posting this in the right section. I have an old version of mavis beacon that I installed on vista and I it worked just fine. But today when I tried to use it, it kept closing. The error is related to the ntdll.dll file. Anyone know why this file would make this keep happen?
Problem signature
Problem Event Name: APPCRASH
Application Name: Mavis.exe
Application Version: 1.0.0.1
Application Timestamp: 3592b413
Fault Module Name: ntdll.dll.....
View 4 Replies
View Related
May 11, 2008
I realize this may be off topic but I don't find any place to post it. I am trying to do a DOS coy command that combines a number of files into single one. This syntax works if I am in the directory where the files are located: Copy *.csv Prices.txt But if I am in another folder and try to put a path to it like copy C:FinanceMutual FundsGet Prices*.csv Prices.txt It always says it cannot find the file. I KNOW the location IS correct. Is there some error in the syntax that can cause this?
View 4 Replies
View Related
Mar 8, 2009
I have a network setup between my PC and a laptop. both running vista. The network folders can be accessed from the laptop but not from the PC.the PC cannot even connect to its own shared files with the following error; ...is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The specified network provider name is invalid.
PC IP 192.168.1.3
LAPTOP IP 192.168.1.4
LAPTOP DEFAULT GATEWAY 192.168.1.3
networks are both set to private with discovery and file sharing on. both have password protected sharing.
View 4 Replies
View Related
Apr 15, 2008
I have a file that I tried to delete. When attempting to delete, I receive a message saying the file name is to large. I moved the file to the recycle bin and ran the free up disk space and received the same message. I also tried to rename the file...no can do.
View 9 Replies
View Related
Mar 23, 2008
I have been trying to upgrade from Windows XP Tablet Edition to Vista Ultimate on my Travelmate C300 laptop. I have found the following error file after the install fails in the location: C:$WINDOWS.~BTSourcesPanther The file is called: setuperr.log The content is quite long but i will post it here -decipher it and advise how i can upgrade to Vista?
setuperr.log *** Content 2008-01-10 20:29:48, Error [0x0808f5] MIG AddDriverFiles: SetupDiBuildDriverInfoList failed[gle=0x00000002] 2008-01-10 20:38:21, Error [0x08081e] MIG Failed to load manifest at :$WINDOWS.~BTSourcesdlmanifestserrorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0x0, Line = 2, Position = 134; . . void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)....................
View 5 Replies
View Related
Sep 10, 2008
Im currently using cowon jet audio(latest version 7.1) on my laptop and pc, both computers are running vista home premium with the exception being the laptop on 32 bit and my main pc running 64 bit version. the media players works fine on my laptop in 32 bit no probs at all, but on my main pc its installs fine will play any individual file fine but the problems start when i try to group several files together to play as an an album. it tells me there was an error loading the skin file and i should try either another skin or search the web for new skins. (i have tried this and it doesnt work) ive also tried running in compatible mode with xp and no luck.
View 5 Replies
View Related
Dec 1, 2009
A friend installed the Powerpoint viewer. He's still having problems with the file association throwing an error when doubling clicking in Windows Mail. I seem to recall that there was a specific Vista Bug/Fix in this area. Any pointers?
View 5 Replies
View Related
Apr 9, 2008
I ran windows update and the updates failed, I have sorted that out by stopping one update but now the computer wont boot without the vista disc being there. On start up everything is ok, it gets to verifying DMI datapool and I get a message something like File BootBCD - an error occured while attempting to read the boot config data ox000000f. I have run windows start up repair & this says it cant find a problem. I have used bootrec /scan and it returned 0 windows installs, /rebuild & Fixboot did nothing, I havent tried FixMbr cos I dont understand what that does and I dont want to make the problem worse - so long as I have the cd in I can ignore when it says press any key to boot from cd & it starts but why do I have to have the cd in? I tried one system restore but that made no difference, it seemed to say boot info wasnt part of the restore & I cant see anywhere to say I want that included but thats another question!
View 4 Replies
View Related
Apr 28, 2008
I upgraded my xp os to vista home premium 32bit. By mistake I uninstalled windows defender. When i tried to reinstall, I got a message that I already have it in the os. When I go into the control panel, and click on windows defender I get a no file association 0x80070002 message.
View 4 Replies
View Related
May 30, 2009
Using Vista home Premium, SP1, I am using Outlook 2003 for emails, and Windows Live Hotmail. Suddenly, when I get emails in Outlook containing hyperlinks, clicking on any links, an error message appears saying "This operation has been canceled due to restrictions in effect on this computer.
I have User Account Control switched off. Using Hotmail via Internet Explorer does not have the same problem. Hyperlinks can be opened. Nor is there any other similar problem on my other computer. The only workaround, which is a little daft, is to forward the message with the hyperlink to an email account on another computer, or to my Hotmail account on the same computer.
I have tried all the Options offered in Outlook, and tried to find anything available via Control Panel, but I can't find any reason for this.
View 9 Replies
View Related
Jan 17, 2009
"This file does not have a program associated with it for performing this action. Create and association in the Set Associations control panel" I have been having a problem with my computer for several days now. Opening all programs causes me to recieve this error message. I have to use right click + Run as Administrator to use any of my programs. I have done some forum surfing and tried several recommended techniques for correcting this problem but to no avail. I downloaded the exefix_vista reg file but the very same problem prevents me from merging it (I even tried fixing the reg extension but that failed aswell). I have run the sfc/scannow in command propmt but that came up empty. I would have fresh installed but I am away from home and do not have the means to reinstall vista. I apologize if this post seems in any way redundant but my forum searches have failed me. HELP! PLEASE!
View 9 Replies
View Related
Jun 9, 2008
i'm trying to play a game (which i think is 16bit) i downloaded but it keeps coming up with an error message telling me that i'm missing the C:WINDOWSSYSTEM32CONFIG.NT file. i have looked up ways to fix this, but can only find solutions for Windows XP, & when i found a solution here from a user called Josh, he claimed there is an HKLM pathway in regedit but i don't see this my system is Windows Vista Home Premium 32bit.
View 8 Replies
View Related
Mar 28, 2009
I'm having a spot of bother with Windbg. I've been messing with a game and found whenever I try to assemble any instruction containing 'xmm0' I would recieve an 'Bad opcode error' warning. I've even tried copying an existing instruction ie, movaps [ecx],xmm0 and still get the same warning. If there are any Windbg users on this board can you please tell me the correct way to write 'xmm0' or any of the 8 xmm registers, to work with Windbg.
View 4 Replies
View Related
Mar 26, 2008
Does anyone know of a list of unnecessary services that can be turned off without harm--and speed up startup/opeation? I already have done a TrueImage restore one time and do not want to go through it again.
View 5 Replies
View Related
Jun 30, 2009
every operation requires UAC and a password (why?) under a domain. when trying to disable the uac i get: the requested operation requires elevation tried to elevate CMD but still get this message: the requested operation requires elevation. i can't login locally because i don't have the user password. any change to get this message out the way?
View 4 Replies
View Related
Aug 26, 2009
Are any or all of these games MP only? if not, and the SP Campaigns can also be played... which one do you suggest I pick up? Are there more than 1? Sorry, tried to google this but it is a bit confusing. I saw the trailer of the new OF:RS coming out in Oct and I think is going to be the kind of game I would probably like to buy... very enticing to say the least. Of course, for me the motto is:, No demo, No sale. Ubisoft has made me a Non-Believer, or smarter... whichever one you like
View 4 Replies
View Related
Jul 20, 2009
I have seen many comments on the net about a problem when clicking on hyperlinks in Outlook email or tables in Word, a message comes up "The operation has been cancelled due to restrictions in effect on this computer" I have admin rights and have tried all sorts to find out why this is happening without success.
View 7 Replies
View Related
Dec 10, 2008
Installed Vista 64 Home Premium SP1 OEM on Gigabyte GA-EX58-UD5, and the computer immediately began to download and install 40 updates via "auto update". These updates did not affect the operability of Vista, HOWEVER the 2nd group of "updates" (there were like 4-5) completely disabled my onboard NIC drivers and I could no longer connect to the internet. There were no updated NIC drivers on the Gigabyte website for the motherboard. I used "System Restore" but the system would not allow the NIC drivers to be reinstalled.
This is TOTALLY unacceptable when you are obligated to download "Auto-Updates" and then they require a complete reinstall of the OS to repair the damage caused by the "Update". I was forced to completely reinstall Vista 64 SP1. I allowed the first 40 updates to install, then I disabled "auto updates". Anyone else have this problem? Unfortunately, I was unable to determine exactly which module created the problem - but I tried "uninstalling" the top five "updates" on the "installed updates" list but could not get the system to allow the NIC drivers to initialize/install.
View 7 Replies
View Related
Mar 23, 2008
I was doing a sfc scan and this was what the screen said: " Verification 45% complete. Windows Resource Protection could not perform the requested operation " (end of quote). what are the possible reasons of only 45% completion, and what I should do to correct that.
View 5 Replies
View Related
Mar 23, 2008
Is there any way to copy and paste or drag and drop operation like it was in previous Windows? It drives me nuts when I have to type the full path of executable I want to run in that window!
View 4 Replies
View Related
Feb 9, 2009
I have a network share setup b/w a Vista Ultimate x32 and XP machines. Using the XP machine, I open the Vista hosted share but found some files "missing", ie. even though they physically exist in the Vista machine, I simply cannot see them from XP. Turns out that these files are missing the EVERYONE in the File Permissions (right click file, properties, security).
These are files downloaded using Firefox, and whether they are JPG, AVI, TXT, DOC, XLS they are all missing the EVERYONE permission. If I download the same files using Internet Explorer, the files get created with the EVERYONE permission. My current workarounds ... which none are desirable are this: - Use Internet Explorer- Add EVERYONE permission for each file manually (you have to do this one by one, can't select multiple files and perform bulk operation) - Use CMD line utilities like takeown and icacls. Note this is a secure home network, and while file sharing using EVEYRONE isn't the safest way to do this, I can finetune this later. The key problem at hand is what I've described above. FireFox create files with the full permissions, same way IE does.
View 7 Replies
View Related
