64 SP1 Crashed After 24 Hours Of Operation Due To Auto Updates
Dec 10, 2008
Installed Vista 64 Home Premium SP1 OEM on Gigabyte GA-EX58-UD5, and the computer immediately began to download and install 40 updates via "auto update". These updates did not affect the operability of Vista, HOWEVER the 2nd group of "updates" (there were like 4-5) completely disabled my onboard NIC drivers and I could no longer connect to the internet. There were no updated NIC drivers on the Gigabyte website for the motherboard. I used "System Restore" but the system would not allow the NIC drivers to be reinstalled.
This is TOTALLY unacceptable when you are obligated to download "Auto-Updates" and then they require a complete reinstall of the OS to repair the damage caused by the "Update". I was forced to completely reinstall Vista 64 SP1. I allowed the first 40 updates to install, then I disabled "auto updates". Anyone else have this problem? Unfortunately, I was unable to determine exactly which module created the problem - but I tried "uninstalling" the top five "updates" on the "installed updates" list but could not get the system to allow the NIC drivers to initialize/install.
View 7 Replies
ADVERTISEMENT
Jun 11, 2008
I bought this computer last Dec, 2008 with Vista Home Premium installed. It's had a full time DSL connection the entire time. It automatically receives the Windows Updates when the are available. In fact, it received a bunch of updates last night (6/11/08).I just checked "Welcome Center" again and it does not show SP1. I thought SP1 was supposed to be installed through these auto updates over the last month or so. Am I wrong? I'm sorry to say that Vista has been disapointing and very flakey. I was hoping that the SP would correct some of the bizarre behavior. Should I wait for the Sp1 auto update? Should I download it from MS? Should I skip SP1?
View 6 Replies
View Related
Apr 15, 2008
I have Vista ultimate on a desktop and got the Vista service pack 1.on, i have a sony laptop with vista business, but do not get the vista service pack 1 on auto updates, but have all the latest updates on, how can i find out if it is drivers that is stopping it being sent, i checked the alps touch pad driver for any driver updates but they said it is the latest one on.
View 4 Replies
View Related
Sep 3, 2009
I let Vista do two updates on my Tosh A300-1BZ Laptop - I think 1 was an IE8
compatibility update, the second a windows defender patch and the third (enabled in error) was a "windows live essentials" update which I cancelled half way through (by hitting Cancel and then Yes etc).
The updater reported two updated done one cancelled and requested a reboot.
After re-boot all I get after the initial Microsoft "bar graph" loading icon is a blue screen and "STOP: c0000139 (Entry Point Not Found) The procedure entry point ntoskrnl.Ex1AcquireFastMutex could not be located in the dynamic link library HAL.dll."
I've tried using repair windows using F8 and from a Vista Ultimate DVD (which reports no errors) and using system restore to a previous point which reports success but on re-boot the laptop still blue screens with the same report.
View 9 Replies
View Related
Sep 30, 2008
the latest Vista updates were downloaded to my computer. I didn't restart my computer after the updates were downloaded. When I turned on my laptop this morning, the Startup Repair window comes up because windows failed to start. I've run the repair several times, and it's unable to repair. It lists the following
problem details:
Problem Event Name: StartupRepariV2
Problem Signature 01: AutoFailover
Problem Signature 02: 6.0.6000.163686.6.0.6001.1800
Problem Signature 03: 5
Problem Signature 04: 262148
Problem Signature 05: BadDriver
Problem Signature 06: BadDriver
Problem Signature 07: 0
Problem Signature 08: 3
Problem Signature 09: WrpRepair
Problem Signature 10: 10
OS Version: 6.0.6000.2.0.0.256.1
Local ID: 1033
So, I see that part (if not all) of the problem is bad drivers. Why is this so and how can I fix it? I have a Gateway M-Series laptop (about 10 months old).
View 5 Replies
View Related
Jun 16, 2009
It hasn't automatically updated its JVS signatures since I installed the new service pack on May 27. I can still manually update, but miss the convenience of auto. I checked my Windows Firewall settings and created an exception for Avast. I have performed a repair installation of Avast and have even renewed my license key early. Is there some kind of incompatibility between Vista SP2 and Avast that I don't know about?
View 6 Replies
View Related
Apr 17, 2009
friend did auto updates now nothign works, cant roll back uninstaller wont work, installer fails, heres the logs sorry theres loads!!
Code: Level Date and Time Source Event ID Task Category Information 17/04/2009 00:40:00 Windows Error Reporting 1001 None "Fault bucket 41478427, type 5........
View 9 Replies
View Related
Apr 12, 2008
I am trying to install an electronic edition of Britannica. Previously, it took about 10 minutes, using 2 CDs on XP Pro.
I did a major upgrade for but did not replace my DVD, CD, Power Supply, or Floppy.
My board is an Intel DG33FB
My chip is an Intel Core 2 Dual (e4500)
I have 2 GB DDR 667 and one mal-partitioned SATA drive. The Vista portion has 167 GB.
Today, it took aver three hours to copy merely 329 MB of data onto the other partition using my HP 940i DVD writer. the program was not even half done, BTW I got several gray-out screens in the process. I could not do any other work because the darn machine hung.
View 9 Replies
View Related
Mar 23, 2008
How do i get my games to auto play and auto run in win Vista? Any other installation disk will auto run, but not games? I even installed 4 virtual drives from Farstone Pro. It has an auto play and auto run feature in it. But it doesn't work either?
View 5 Replies
View Related
Apr 6, 2008
everytime i try to publish a movie in wmm it says it will take over 12 hours to complete.
View 5 Replies
View Related
Mar 23, 2008
for messages that I am sending to reach their destination. I sent myself a test message to see how long it would take to receive it and I got it 12 hours later. This is happening to other people that I am sending messages to. What can I do to correct this as this is very frustrating. I have no problem receiving mail from anyone else.
View 4 Replies
View Related
May 29, 2009
1st when i open my computer i have the IP of.. 132.0.122.964(example) then when i shut it down after 4 to 5 hours or even 30 mins or lower it will change how can i make my IP stable even if i shut it down.
View 9 Replies
View Related
Apr 4, 2009
The information you've sent me, it looks like your network stack is being reset approximately every two hours. As the stack is rebuilt, various pieces of information about network become available over time. As each piece becomes available, NIS it treats the new result as a new network, that's why you get a few network discovery events over a relatively short period of time. It also explains why you see occasionally slow network traffic; the network stack is being rebuilt.What I don't understand is why the network stack is being reset. This doesn't seem like anything malicious but may be due to faulty hardware on your machine or, more likely, some scheduled program or task running on your machine. It could also be due to plugging certain devices into a USB port.I have NOTHING plugged into usb, no self installed software running and this is a 3 month old machine. The only thing plugged in (through ethernet) Is my vonage V-Portal wich I use for voip
View 9 Replies
View Related
Nov 17, 2008
Check Point to Celebrate 15th Anniversary by Giving Away ZoneAlarm Pro SoftwareWritten by Paul Lilly 11/17/08 at 08:18:19 AM
Given the widespread availability of free solutions, we know how power users hate to pay for security software. If you fall into this category, your options will become slightly more robust this Tuesday, November 18.
According to a spattering of reports, a company spokeswoman for Check Point said the company plans to celebrate its 15th anniversary by giving away a 1-year subscription to its ZoneAlarm Pro software security suite. For those not familiar with the program, ZoneAlarm Pro expands on the company's popular firewall solution by throwing in a spyware remover, protection against rootkits, ID theft protection, and other security odds and ends. The full program typically sells for $40/year.
If the reports hold true, you can download your copy from this link beginning at 6:00 AM US PDT time (8 AM Central) Tuesday morning. Procrastinators be warned, the link will only stay active for 24 hours.
See Source: Check Point to Celebrate 15th Anniversary by Giving Away ZoneAlarm Pro Software | Maximum PC
View 9 Replies
View Related
Apr 14, 2008
After a few hours, I killed it. No errors, but no movement. Seems like a waste. I was only testing the conversion of an 8mg .AVI file.
View 8 Replies
View Related
Jan 5, 2008
I have tried several different settings and cannot get my monitor to wake up after sleeping for several hours. I have tried hybrid on and off. I have changed various settings in BIOS. I have made sure USB never turns off. I have changed the settings related to PCIe in sleep mode... Nothing works. I have a ABIT IP35Pro Board with an Sapphire 3850 Video card.
View 6 Replies
View Related
Mar 30, 2010
My PC has developed an annoying habit of changing the time to 11 hours ahead.
I change it back to correct time, try setting the internet update to on/off and still I cant stop this from happening.
running Vista Home Premium x64
View 9 Replies
View Related
May 13, 2010
there's always a pop up msg saying that"the pre release of windows vista home premuim will expire in 0 hours.Back up your files and install any release edition of windows vista home premuim"
...2 hours after I receive that msg. my pc restrarts....my windows detected a problem and needs to restart...
How to do the process is my problem..I have read notes how to uninstall my pre-release version. After I uninstall it what shall i do then?
View 2 Replies
View Related
Mar 23, 2008
I'm presently experiencing a situation in which my Internet connection (cable Internet) will suddenly and inexplicably come to a complete halt. This has absolutely nothing to do with my actual cable Internet connection; everything with the cable modem is functioning perfectly. Instead, just about every 24 hours I will reach a point in which my desktop system (Windows Vista Ultimate) will simply shut itself off from the Internet. I have absolutely no idea what is causing this. In the past, I have been able to go to the Network control panel and simply perform a repair of my Internet connection. This no longer works. However, restarting the system works 100% of the time. So basically I'm left with a system that functions for approximately 24 hours, then it must be restarted in order for me to continue using the Internet. Then of course the cycle repeats itself. I'm not using any third party firewall software by the way, only Vista's firewall.
View 9 Replies
View Related
May 8, 2008
I guess I kind of receive email - about every two days or so. It went from a quick easy operation to agonizingly slow...I can only receive email occasionally and it waits in the outbox for hours. I uninstalled McAfee, checked the servers (working fine for everyone but Vista me) checked the ports (correct). What's next? By the way this started suddenly. It worked perfect one day - not at all the next. Was there an update that caused this? Here's the message I get after one hour of trying to use email: Socket Error: 10060, Error Number: 0x800CCC0E zimmer.csufresno.edu
View 7 Replies
View Related
May 30, 2009
Using Vista home Premium, SP1, I am using Outlook 2003 for emails, and Windows Live Hotmail. Suddenly, when I get emails in Outlook containing hyperlinks, clicking on any links, an error message appears saying "This operation has been canceled due to restrictions in effect on this computer.
I have User Account Control switched off. Using Hotmail via Internet Explorer does not have the same problem. Hyperlinks can be opened. Nor is there any other similar problem on my other computer. The only workaround, which is a little daft, is to forward the message with the hyperlink to an email account on another computer, or to my Hotmail account on the same computer.
I have tried all the Options offered in Outlook, and tried to find anything available via Control Panel, but I can't find any reason for this.
View 9 Replies
View Related
Feb 17, 2009
When I attempt to delete the program I go to (programs and features) after I open it is does not response and the cpu seem to be used High and all cores 100% busy even If I close (programs and features) the cpu still busy and never stops even If leave it for more than 3 hours - like what I did - and same proplem the cpu still busy! and this happed only if I open (programs and features) !
View 9 Replies
View Related
Mar 26, 2008
Does anyone know of a list of unnecessary services that can be turned off without harm--and speed up startup/opeation? I already have done a TrueImage restore one time and do not want to go through it again.
View 5 Replies
View Related
Jun 30, 2009
every operation requires UAC and a password (why?) under a domain. when trying to disable the uac i get: the requested operation requires elevation tried to elevate CMD but still get this message: the requested operation requires elevation. i can't login locally because i don't have the user password. any change to get this message out the way?
View 4 Replies
View Related
Aug 26, 2009
Are any or all of these games MP only? if not, and the SP Campaigns can also be played... which one do you suggest I pick up? Are there more than 1? Sorry, tried to google this but it is a bit confusing. I saw the trailer of the new OF:RS coming out in Oct and I think is going to be the kind of game I would probably like to buy... very enticing to say the least. Of course, for me the motto is:, No demo, No sale. Ubisoft has made me a Non-Believer, or smarter... whichever one you like
View 4 Replies
View Related
Dec 24, 2008
I have three problems which result in the 0x80071a91 error message and seem to be related to transaction support/resource manager. I found several KB articles and comments in this and other forums and tried the various fixes - none work - each is a pre-SP1 fix. My Vista system is: Factory Installed Vista Home Premium 64 bit SP1 with all updates on Gateway 4 core processor and less than three months in use.
PROBLEMS:
1) Attempting to run Backup at the point where the settings are to be saved. KB 939615 - Cannot change the settings for a file backup operation or use the Windows Task Scheduler to change the defrag schedule in WIndows VIsta. Transaction Manager Fix - 0x80071a91 error. Recommended fix is: fsutil resource setautoreset true c:
2) Attempting to delete a task Transaction support within the specified file system resource manager is not started or was shutdown due to an error. (0x80071A91)
3) Attempting to link to on-line error message from the event viewer. Clicking on "on-line event" closes the event manager snap-in
Msesage: Unhandled Exception in Managed Code Snap-n - HRESULT 0x80071A19. "This snap-in performed a non-valid operation and has been unloaded- Exception type: Syustem.Runtime.Interop.Services.comexception - HRESULT 0x80071a91."
A fourth problem may or may not be related - when I try to start Wsearch (Windosw Indexing Services) it stops within 3-5 seconds with the error msgs - 0x80040d23, 0x8007007e (VSS) finally 0x80071a91.and Events ID 1008, 1015, 1004 and 1008.
View 6 Replies
View Related
Jul 20, 2009
I have seen many comments on the net about a problem when clicking on hyperlinks in Outlook email or tables in Word, a message comes up "The operation has been cancelled due to restrictions in effect on this computer" I have admin rights and have tried all sorts to find out why this is happening without success.
View 7 Replies
View Related
Mar 23, 2008
I was doing a sfc scan and this was what the screen said: " Verification 45% complete. Windows Resource Protection could not perform the requested operation " (end of quote). what are the possible reasons of only 45% completion, and what I should do to correct that.
View 5 Replies
View Related
Mar 23, 2008
Is there any way to copy and paste or drag and drop operation like it was in previous Windows? It drives me nuts when I have to type the full path of executable I want to run in that window!
View 4 Replies
View Related
Feb 9, 2009
I have a network share setup b/w a Vista Ultimate x32 and XP machines. Using the XP machine, I open the Vista hosted share but found some files "missing", ie. even though they physically exist in the Vista machine, I simply cannot see them from XP. Turns out that these files are missing the EVERYONE in the File Permissions (right click file, properties, security).
These are files downloaded using Firefox, and whether they are JPG, AVI, TXT, DOC, XLS they are all missing the EVERYONE permission. If I download the same files using Internet Explorer, the files get created with the EVERYONE permission. My current workarounds ... which none are desirable are this: - Use Internet Explorer- Add EVERYONE permission for each file manually (you have to do this one by one, can't select multiple files and perform bulk operation) - Use CMD line utilities like takeown and icacls. Note this is a secure home network, and while file sharing using EVEYRONE isn't the safest way to do this, I can finetune this later. The key problem at hand is what I've described above. FireFox create files with the full permissions, same way IE does.
View 7 Replies
View Related
Nov 18, 2009
I boot up with cd and do a Starup Repair but it stll gives me black screen with the mouse arrow. The details of the repair is of root causes 1 and all the error codes are 0x0 The last sentence it says Root causes found:- Boot status indicate that the OS booted successfully Reading throiugh this forum I also do a scannow at c:>sfc /scannow but it gives me a message that "Windows Resource Protection could not perform the requested operation" Just wonder what can I do next to get my vista going as it is still giving me the black screen with the mouse arrow.
View 4 Replies
View Related
