Can Not Change The Workgroup To The Name Of My Home Workgroup
Apr 27, 2009
I have a Vista PC and an XP PC and on the Vista PC, I can not change the Workgroup to the name of my home workgroup. I get an network error message when I click on the Apply button. There are no special characters or spaces in my home workgroup name. What's interesting is that when I do a Query of the Network computers on the Vista PC, I can navigate to the folders that are shared on the XP PC. The problem I'm having is that I am trying to share a printer that is physically connected to the XP machine with the Vista PC. Even though both PC's are on the same physical network but on different Workgroups, I can see my XP machine, which I thought was not possible, if you're on two different workgroups. I have temporarily turned off the Firewall on both computers, but I get the same network error message.
I am new to this forum and also to vista. I work in an educational organization. We have a local workgroup setup and five or six departments have been give net connectivity. All our computers have xp installed, and when a new computer is loaded with xp, it used to detect the internet connection straight away, and would connect to the net. Now I have been asked to use vista so that slowly our organization can migrate to vista. I loaded vista on another partition on my computer. Everything was okay. But vista has not recognized my net connection. It has been asking for isp username and password, which were never asked by xp. So now
1. How to make vista understand that I have already a LAN card on my motherboard and my computer is connected to the net through the central server? Our net administrator would not divulge the username and password. He asked me to find out other means:"When xp can, why can't vista recognize?" was his question.
2. Once the connection is established, how do I connect to my workgroup? Just as in xp, my giving the workgroup name?
SO we bought a new dell with vista 32 biz on it. We have a workgroup comprised of 4 xp machines. One of them is the "server" basically a share that we use to run a program on all the clients. They are all networked with a cisco 8 port switch. There is no domain in this setup either just the switch and the other pc's. I can not get the vista pc onto the workgroup. The switch shows no link light from the new pc and the pc acts like there is no cable plugged in. I'm sure all the hardware is working too.
What determines whether a machine will appear in Network Places? I'm not asking for boilerplate information about Windows Networking or the uninformative Help content for Vista Networking which is reposted at the Microsoft web site with no additional information.
I want to know where I can get substantive information that can help me determine why one of my XP machines is accessible from my Vista machine -- as in I can add its shared folders to "My Computer" -- but does not appear in the Network Places folder or in the tree in the common file dialogs. On the XP side, the Vista Public tree is visible and acessible from the invisible XP machine but I can't browse the workgroup. When I click the "View workgroup computers" link in the XP Network Tasks pane, I get an error message:
I have a home network that consists off an XP Desktop, a Vista Desktop, a XP Notebook and a Vista Tabletpc. They could all see and access each other with no problem. The Tabletpc and Notebook both are connected by wireless while the desktops are connected by Cat5.This morning I went to use the Tabletpc and it cannot see either of the other computers and they cannot see the Tabletpc., regarless whether I am connected by wireless or Cat5. However, they can see and access each other fine. The other three computers can see and access each other fine.I have tried everything I can think of to get the tabletpc to recongnize the other computers an vise-versa to no avail.The last time I used the tabletpc on my home network was about 8 days ago and it was working fine. That night I was admitted to the hospital for a week. While there I connected to the hospital's wifi. Not sure if this changed something or not but other than that I have not downloaded any software, updates, etc.
what Vista (and XP for that matter) uses for name resolution when on a small p2p workgroup? With no domain or server running DNS and no longer able to run Netbios on the pc. With IP installed I can ping by IP address but what exactly is allowing me to ping by machine name?
I started my MCITP training. Our trainer told us, that there is a limit of maximum 25 Vista clients in a Vista workgroup. Is this correct? From my point of knowledge, there is only a limitation of 10 concurrent incomming connections. There is no limitation on the number of members in a workgroup.I know, a workgroup with above 20 clients for file- and printsharing makes no sence, but is there a limitation?
My home network has several XP Pro SP3 computers that are networked with a common workgroup. My Vista computer is a member of WORKGROUP but isn't networking with WORKGROUP properly, although it connects properly over WiFi to the internet.First, in Explorer, there is a entry named Network (not My Network Places, etc.) that shows only this computer and no entry for WORKGROUP or for the other computers. Also, WORKGROUP is present but is empty (except for this computer) in View Computers and Devices. However, Full Map View shows the other computers and they can be opened with \computername and seen on Net View IP. So, how do I make those computers show up in explorer or View Computers or in some other accessible place? Also, the Vista computer is not visible from the other computers. If searched for with \computername, a error message says "computername is not accessible. You might not have permission ..." Net View IP reports "System Error 5. Access is denied."
All computers are using the WORKGROUP name. Same results with all firewalls disabled. Files are being shared. Private Network, Network discovery On, File sharing On Public Folder sharing On, Password protected sharing off, Media Sharing On, WINS NetBios setting Default. The XP computers are running Link-Layer and NW Link NetBios.
I can not see my iMac DV from my Vista PC. I have them both on the same workgroup. I can see the Vista PC from the iMac, but when I select it and try to login, I get the following error, "the alias could not be opened, because the original item cannot be found". My Mac is running OS 10.3. why Vista can not see this iMac?
Using HP Photosmart 7960 as shared printer off of XP Pro SP2 machine. Works great for the other XP machines that share it. Tried to connect (via network share) my (new) 64Bit Vista Home Premium box to this printer. Of course, it asked for the Vista printer drivers, which do exist. So, the challenge - the drivers won't install on the XP machine, as they are Vista drivers and error out (simple message saying wrong OS). Installed the drivers on the Vista machine, which should solve the problem...it didn't. Went thru both HP directories (under x86 programs) looking for the *.inf files and according to Vista, none of them are correct.
I have 64 bit Vista Home Premium, can I connect to a domain. I see I can connect to a Workgroup, but I don't see a way to connect to my internal domain
The Network and Sharing Center displays a Network Name preceding the Network Type (Public or Private) both of which can be modified. Under the Control Panels | System |Advanced system settings under the Computer Name tab you can view the Workgroup Name and of course modify. I understand the importance of having the Workgroup Name consistent between my XP and Vista computers. Should the Network Name be the same as the Workgroup Name? Does the Network Name have any function in network connections?
Friends are visiting from out of state and connected to my secure home network with their laptop for internet access. We were surprised that they could also see my shared folders even though our workgroup names are different. Is there a way to restrict shared folder access to only members of my workgroup - specifically, allow only the 3 computers (2-XP, 1-Vista) on my home network to see each other's shared folders?
4 computers using broadband connection to internet (easy) 4 computers using workgroup on router and switch to share network shares. The second part let me explain further. I prefer to have Essentially the entire "user files" folder shared to my other computers given they supply a network password....
I cannot access the other computers i type \mainpc i get a typical error "is not available share. Contact the admin for access" My attempts: *all have workgroup the same *all run vista business or ultimate *all can access the internet *reset network connections *reset router even tried using a simple switch only without internet *insured networks were set for PRIVATE network *utilized user name and passwords for all accounts on all computers but the guest account *shared folders using advanced share and pick specific user admin accounts to have full access *i can under network see the computer i want to gain access but it won't ask me for a user name and password if i type \mainpc *I've tried under user accounts in control panel "Manage your network passwords" and inputed the user name nad password on the desired network i want to gain access which semi worked but now it doens't ask for a user name and password. *I've disabled all firewalls and virus scanners *pc 1 and 2 can talk freely to pc 3 but pc 1 and 2 cannot talk to each other.*network discovery on *file sharing on*public folder sharing off *password protected sharing on
Need to change my IP Address. Details; i'm with Virgin media broadband i'm using a cable modem. and i've read how to change it; Via the Network > Manage network connections > Porperties. Doesnt work it tells you. "Obatain and IP address automatically." But mine is already set to that. and with the "Use this IP address." option i don't know what to put in, for the simple fact i wouldnt want to put in an invalid IP.
I understand this can be done online. The information says that I need the Anytime upgrade disk to complete the process. Is this so? Sorry to be stupid but need to know the steps involved. If I dont have an anytime upgrade disk, how do I get one?
I bought retail upgrade vista home premium. Installed on my primary pc and ACTIVATED it. Had odd problems, fixed, then realized I really wanted the ultimate edition. So, bought retail ultimate upgrade. Wiped hard drive, installed XP pro, installed ultimate 64 from there. Now, here is the real question. I now have a perfectly good legal copy of home premium that is not being used. Can I use this copy on a different PC? BTW, it's too late to get a refund from MS, I missed that window of opportunity.
i have this problem where the computer i have a dell dimension 2520 is infested with a virus that i some how cant find with no matter the anti virus spyware or maliscious ware program i find. everytime i try to runthe windows xp boot disk in the beginning i get the whole checking raid controllers an what not runs the disk to the very end then it starts windows. after that i get a blue screen that says *** stop BLAH BLAH BLAH. an tells me to restart the computer. i have been at it for 3 -4 days trying to find a solution an somehow comeup empty handed everytime
my vista came with 64bit os . i want to change to 32 bit os either vista or windows 7 . my computer has a recovery drive factory image d. now my question is it possible to change the os to a 32 bit operating system even though it has a 64 bit now . also if something happens or it doesnt work out will i still be able to access the image drive and would that go back to my original operating system of vista 64bit os . or could i make a bootable disc of my recovery drive and how would i do that.
i am running windows vista home premium and ie7.0.6001.1800i like to watch Internet and with ie6 i was able to go to the cache and save some of the funnier clips.i cannot find the cache in ie7 so i either need help finding the cache or i want to be able to go back to ie6 if possible.
I have just bought a second hand laptop (once again!). I have changed the user name on it to my name (kasim). But the problem is that when i go to Computer and then Users, the user name is still the same as before. The only settings that are on my name is the start menu. Can u please help me change the user name in every setting.
How do I or how can I change the look of my task bar with having to buy a program. I kinda like the look of apples task bar, icons across the bottom. Any ideas. Thanks
I have recently installed software called 'Tune Up Utilites 2010' and immediately found a vast improvement and one its recommendations was to increase resolution to 1680 x 1050. Having then done that in 'Display Properties' it then advises to 'Set dpi to 96'.
However, I cannot find how to make changes to dpi.
I am new here and not sure if I am posting this in the correct area but I could not find a catagory that fits my question. If anyone can tell me a better place to post this, that would be great. I have set my account's name to my desired name but when I go to the Users folder it still lists my user account as the default name. Is there any way to change this?
I reinstalled vista home premium 32bit and just when i was finish i got this text The computer restarted unexpectedly or encountered an unexpected Error. Windows Installation cannot proceed,. To install Window, click “OK” to restart the computer, and then restart the installation. i red somwhere that it would fix to change the voltage to DDR and now i wonder how do i change it? I have BIOS version V1.0B
