Suddenly Cannot See Other Computers In My Workgroup And They Can't See Me
Apr 20, 2009
I have a home network that consists off an XP Desktop, a Vista Desktop, a XP Notebook and a Vista Tabletpc. They could all see and access each other with no problem. The Tabletpc and Notebook both are connected by wireless while the desktops are connected by Cat5.This morning I went to use the Tabletpc and it cannot see either of the other computers and they cannot see the Tabletpc., regarless whether I am connected by wireless or Cat5. However, they can see and access each other fine. The other three computers can see and access each other fine.I have tried everything I can think of to get the tabletpc to recongnize the other computers an vise-versa to no avail.The last time I used the tabletpc on my home network was about 8 days ago and it was working fine. That night I was admitted to the hospital for a week. While there I connected to the hospital's wifi. Not sure if this changed something or not but other than that I have not downloaded any software, updates, etc.
I have a Vista PC and an XP PC and on the Vista PC, I can not change the Workgroup to the name of my home workgroup. I get an network error message when I click on the Apply button. There are no special characters or spaces in my home workgroup name. What's interesting is that when I do a Query of the Network computers on the Vista PC, I can navigate to the folders that are shared on the XP PC. The problem I'm having is that I am trying to share a printer that is physically connected to the XP machine with the Vista PC. Even though both PC's are on the same physical network but on different Workgroups, I can see my XP machine, which I thought was not possible, if you're on two different workgroups. I have temporarily turned off the Firewall on both computers, but I get the same network error message.
I am new to this forum and also to vista. I work in an educational organization. We have a local workgroup setup and five or six departments have been give net connectivity. All our computers have xp installed, and when a new computer is loaded with xp, it used to detect the internet connection straight away, and would connect to the net. Now I have been asked to use vista so that slowly our organization can migrate to vista. I loaded vista on another partition on my computer. Everything was okay. But vista has not recognized my net connection. It has been asking for isp username and password, which were never asked by xp. So now
1. How to make vista understand that I have already a LAN card on my motherboard and my computer is connected to the net through the central server? Our net administrator would not divulge the username and password. He asked me to find out other means:"When xp can, why can't vista recognize?" was his question.
2. Once the connection is established, how do I connect to my workgroup? Just as in xp, my giving the workgroup name?
SO we bought a new dell with vista 32 biz on it. We have a workgroup comprised of 4 xp machines. One of them is the "server" basically a share that we use to run a program on all the clients. They are all networked with a cisco 8 port switch. There is no domain in this setup either just the switch and the other pc's. I can not get the vista pc onto the workgroup. The switch shows no link light from the new pc and the pc acts like there is no cable plugged in. I'm sure all the hardware is working too.
What determines whether a machine will appear in Network Places? I'm not asking for boilerplate information about Windows Networking or the uninformative Help content for Vista Networking which is reposted at the Microsoft web site with no additional information.
I want to know where I can get substantive information that can help me determine why one of my XP machines is accessible from my Vista machine -- as in I can add its shared folders to "My Computer" -- but does not appear in the Network Places folder or in the tree in the common file dialogs. On the XP side, the Vista Public tree is visible and acessible from the invisible XP machine but I can't browse the workgroup. When I click the "View workgroup computers" link in the XP Network Tasks pane, I get an error message:
what Vista (and XP for that matter) uses for name resolution when on a small p2p workgroup? With no domain or server running DNS and no longer able to run Netbios on the pc. With IP installed I can ping by IP address but what exactly is allowing me to ping by machine name?
I started my MCITP training. Our trainer told us, that there is a limit of maximum 25 Vista clients in a Vista workgroup. Is this correct? From my point of knowledge, there is only a limitation of 10 concurrent incomming connections. There is no limitation on the number of members in a workgroup.I know, a workgroup with above 20 clients for file- and printsharing makes no sence, but is there a limitation?
My home network has several XP Pro SP3 computers that are networked with a common workgroup. My Vista computer is a member of WORKGROUP but isn't networking with WORKGROUP properly, although it connects properly over WiFi to the internet.First, in Explorer, there is a entry named Network (not My Network Places, etc.) that shows only this computer and no entry for WORKGROUP or for the other computers. Also, WORKGROUP is present but is empty (except for this computer) in View Computers and Devices. However, Full Map View shows the other computers and they can be opened with \computername and seen on Net View IP. So, how do I make those computers show up in explorer or View Computers or in some other accessible place? Also, the Vista computer is not visible from the other computers. If searched for with \computername, a error message says "computername is not accessible. You might not have permission ..." Net View IP reports "System Error 5. Access is denied."
All computers are using the WORKGROUP name. Same results with all firewalls disabled. Files are being shared. Private Network, Network discovery On, File sharing On Public Folder sharing On, Password protected sharing off, Media Sharing On, WINS NetBios setting Default. The XP computers are running Link-Layer and NW Link NetBios.
I can not see my iMac DV from my Vista PC. I have them both on the same workgroup. I can see the Vista PC from the iMac, but when I select it and try to login, I get the following error, "the alias could not be opened, because the original item cannot be found". My Mac is running OS 10.3. why Vista can not see this iMac?
Using HP Photosmart 7960 as shared printer off of XP Pro SP2 machine. Works great for the other XP machines that share it. Tried to connect (via network share) my (new) 64Bit Vista Home Premium box to this printer. Of course, it asked for the Vista printer drivers, which do exist. So, the challenge - the drivers won't install on the XP machine, as they are Vista drivers and error out (simple message saying wrong OS). Installed the drivers on the Vista machine, which should solve the problem...it didn't. Went thru both HP directories (under x86 programs) looking for the *.inf files and according to Vista, none of them are correct.
I have 64 bit Vista Home Premium, can I connect to a domain. I see I can connect to a Workgroup, but I don't see a way to connect to my internal domain
The Network and Sharing Center displays a Network Name preceding the Network Type (Public or Private) both of which can be modified. Under the Control Panels | System |Advanced system settings under the Computer Name tab you can view the Workgroup Name and of course modify. I understand the importance of having the Workgroup Name consistent between my XP and Vista computers. Should the Network Name be the same as the Workgroup Name? Does the Network Name have any function in network connections?
Friends are visiting from out of state and connected to my secure home network with their laptop for internet access. We were surprised that they could also see my shared folders even though our workgroup names are different. Is there a way to restrict shared folder access to only members of my workgroup - specifically, allow only the 3 computers (2-XP, 1-Vista) on my home network to see each other's shared folders?
4 computers using broadband connection to internet (easy) 4 computers using workgroup on router and switch to share network shares. The second part let me explain further. I prefer to have Essentially the entire "user files" folder shared to my other computers given they supply a network password....
I cannot access the other computers i type \mainpc i get a typical error "is not available share. Contact the admin for access" My attempts: *all have workgroup the same *all run vista business or ultimate *all can access the internet *reset network connections *reset router even tried using a simple switch only without internet *insured networks were set for PRIVATE network *utilized user name and passwords for all accounts on all computers but the guest account *shared folders using advanced share and pick specific user admin accounts to have full access *i can under network see the computer i want to gain access but it won't ask me for a user name and password if i type \mainpc *I've tried under user accounts in control panel "Manage your network passwords" and inputed the user name nad password on the desired network i want to gain access which semi worked but now it doens't ask for a user name and password. *I've disabled all firewalls and virus scanners *pc 1 and 2 can talk freely to pc 3 but pc 1 and 2 cannot talk to each other.*network discovery on *file sharing on*public folder sharing off *password protected sharing on
My computer was running perfectly fine about a week ago,but now its become 100% slower! I got Norton Internet Security 2009 and Spyware Doctor and used them both to scan my computer, solved a few viruses and that was it. I have no new programs installed,in fact, I'd removed some programs. (except for NIS 2009/Spyware Doctor(It was also slow before I got those)) It was still slow...it takes literally about a minute to open programs and about 5 minutes just to start up. Normally it would take 1-2 seconds to open programs and 2 minutes to start up. I really have no clue what to do right now and this is really pissing me off right now!
When I double-click on a Contact file, I get the popup -
Windows cannot open this file:
File: filename.contact
Asks me to use Wed Service or select program from list of installed programs.
Neither works. MS Web Services (amazingly) does not recognize .contact. And there's is no Contact program in the list of programs (or anywhere I can find on my machine).
I am trying to play gears of war and it stops working right in the middle of me starting it up. It would play for a while load up and the game will stop working and the program closes. I tried installing it and running it as admin. Installed reinstalled the game and directX still nothing.
When i on my computer ( Dell Dimension E520 ) for three hours, suddenly shut down my computer, But a start button keep on flasher. I tries to on it back after shut down, but in vain, i believe sometime do with power supply. because after next day computer can start again.
first off let me give you the spec of my pc, im running Windows 64bit, MSI Dual Quadcore processor, 8 gigs of ram, 2 500gb harddrives, 2 gforce 9800vid cards and creative soundblaster soundcard. Anyways this problem has happened last time after doing ALL these windows updates, service pack 2, the whole works. MY harddrive light stays SOLID now, even when idle, I jsut got home from work after an 8hour day, and its still on? What is going on? I ran virus checks with AVG free editon that came with my pc, I keep everything up todate on a regular basis. Is this normal? It even sounds like I can hear my harddrive running, this is really starting to freak me out.
I have Vista Home Premium/2GB RAM/Core 2 duo I got this security alert today when I booted. When I open Windows Security Center it shows the problem that Windows Defender and Spyware Doctor are both turned off. That's as it should be and as it has always been. I have BitDefender Internet Security 2009 and it shows "No issue affects your computer."
I used an elevated command to check that WMI and it shows as consistent. So why did this alert suddenly start showing up?
I know I can turn the alerts off, but I'd much rather find out what caused this problem and fix it.
my Sims 2 Double Deluxe used to work... For about 2 months. But, about 10 minutes ago, I tried to play again. An error came up."Unable to retrieve a DirectX 9 adaptable graphics card!!" or whatnot. Somewhere along those lines. On my computer at my house (I am at my dads) it does the same thing, but I understand because the card is OLDDDD. But, here, I have Windows Vista Home Premium and a newww graphics adapter!!! Quote: Name: Mobile Intel(R) 965 Express Chipset Family And the chip has the proper amount of memory. I am so confused. x.x
Ive had my computer for about a month a before now its had sound perfectly. but yesterday the sound suddenly stopped working i cant work out how to fix it as im not very good at computers.
im trying to regain write-access to an external hard drive which, after a reboot, Vista decided it would no longer let me write anything to...(worth repeating, i didnt change any setting in order for this to happen, i just rebooted!) In an earlier question on this issue someone suggested the followin The problem is that i cannot finally get the permissions back to normal following these steps. At the last "click on the OK button" i get an alert telling me various files are read only (Vista alerts to one file at a time, obviously) and therefore is unable to make the required changes.
when I login to the one I use most of the time, I notice that Firefox wont work, there is no error, actually, it starts but nothing happens, its just blank, it says "Done" in the bottom left corner, but it is nothing in the Firefox window. And when I close FF I get a error;
"Firefox has stopped working 1.Check online for a solution and close the program 2.Close the program"
If I chose the 1st option I get this message "The exception enknown software exception (0xc0000005) occurred in the application at location 0x02ff8cf0. Click on OK to terminate the program." Then I tried IE (32x), same thing there, so I try IE 64x, it worked. Also I tried to restart my switch, ping some webpages, release / renew IP. There was no difference. I also tried System Restore, but I could only restore to about 15 minutes back in time, wich was when I turned on my comuter today.
Then I tried to start some games to see if it worked, first Peggle Deluxe, that worked fine. Then WoW, that did not work fine at all. The first thing that is wrong is that when I start WoW the launcher says "Cannot connect to the News Server. Please check the network and try again later." I pressed play anyways, just to see what happens, and what happens is that the screen turns dark, Winamp is still playing music, but no sound from WoW, and alt + tab doesnt work, same with the windows button or alt+ f4. but ctrl+alt+del works. so I was able to close the program, it wasnt responding either ofc..................
I'm presently experiencing a situation in which my Internet connection (cable Internet) will suddenly and inexplicably come to a complete halt. This has absolutely nothing to do with my actual cable Internet connection; everything with the cable modem is functioning perfectly. Instead, just about every 24 hours I will reach a point in which my desktop system (Windows Vista Ultimate) will simply shut itself off from the Internet. I have absolutely no idea what is causing this. In the past, I have been able to go to the Network control panel and simply perform a repair of my Internet connection. This no longer works. However, restarting the system works 100% of the time. So basically I'm left with a system that functions for approximately 24 hours, then it must be restarted in order for me to continue using the Internet. Then of course the cycle repeats itself. I'm not using any third party firewall software by the way, only Vista's firewall.
Have had the printer for several years and it works flawlessly 3 days ago it suddenly refused to print When I look at the printer folder, it is default but it says it's offline I can't find out how to make it go online
From 'justanswer' I was told to do a restor, so I've tried going back a couple of restores, but they both failed, then had to undo the restores to get back to where I was
In safe mode I removed the printer then added it back by re-installing its software sometimes vista asks me to say which port, but as it's usb plugnplay I dont know how to handle it I've tried resetting the printer from this website http://tricks-collections.com/resetter-printers-canon-pixma-ip1000-ip1200-ip1300-ip1500-ip1600-1700-ip1880-ip2200-ip3000-ip4200-ip5200/.
Have a wireless router and cable modem on computer 2 in one bedroom. Suddenly computer 1 in another bedroom cannot connect to to internet. Worked fine until one morning. No settings were changed. Laptop has no problems connecting. Internal network device shows as working properly. Network is there - available to choose and connect to with all green bars but attempts to connect and diagnose suggest "low wireless signal quality." All recommendations have been followed to connect but nothing has worked. Computer is less than 1 year old. Is it possible that an updated driver for the wireless adapter would help? I am going to humiliate myself and ask the stupidest question ever - the same day it quit working, some very large construction equipment was parked in an empty lot next door to us. Could this interfere with any signals?
I see a lot of issues for Windows Media Player but not any solutions that have worked for me. I have Windows Media Player 11 on Vista 64 Home Premium and everything was working just fine until all of a sudden I click on WMP and it does not respond which then caused problems with even shutting down the computer. I have rebooted I have tried scandisk and I have tried re-register of files such as regsvr32 wmp.dll and so forth and still no luck. I have also done a system restore to various times when I thought things were working just fine and still no luck.
I have installed outllok 2007 (on W. Vista). Suddenly it does not work. Every time I get this message:
Outlook didnt close correctly last time. Problem signature: Problem Event Name: APPCRASH Application Name: OUTLOOK.EXE Application Version: 12.0.6316.5000..................
It is supposed that it wasnt colsed correctly, but I have uninsatalled / installed 4 times all the office (with all updates included), but still does not work. In one of those I even deleted the folder "microsoft office" in the folder "program files". Since I have been trying to solve this issue since one week ago, I am desesperate.
I have been using windows mail with my current ISP for a few years with no issues. Suddenly when I try and replicate I get the following message: Account: 'pop3.slingshot.co.nz', Server: 'pop3.slingshot.co.nz', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800CCC19
I have tried turning off my anti virus (avast) I have created new accounts I have turned off my firewall I have deleted all new emails on my web mail account I have spoken to my ISP
I am now alomost ready to go postal. Just found that a test email I sent from Hotmail came through OK, but one from my work email again caused the above error.
