Bootable Thumb Drive
Aug 21, 2008I have this 2.0 gb thumb drive that was given to me. How can I tell if it's bootable or not. It does not have a brand name on it.
View 6 Replies
ADVERTISEMENT
Safely Remove USB Thumb Drive :: Light Stays On Drive
Sep 28, 2009Before I remove a USB thumb drive, I click the green check from notification area; I click the message that appears next to the green check, Safely remove USB Mass Storage Device - drives (F:, G; then a dialog box appears that states, This device can now be safely removed from computer.
The light on the thumb drive, however, stays lighted. I previously followed a procedure where the light would go off on the thumb drive when I did a Safely Remove.
Should the light on the thumb drive go off before it can be safely removed? If so, how do I get the thumdrive light to go off?
Using A Thumb Drive As A Floppy
Dec 27, 2007Can you use a thumb drive as a bootable floppy? For such things as updating the BIOS? I don't have a physical floppy drive and it appears that without it you can't update the bios. Never had a thumb drive before and their really cheap now. Just wanted to know how do you go about making it bootable and such if this is doable!
View 5 Replies View RelatedSan Disk Thumb Drive With U3
May 1, 2009I have a San Disk 4GB Cruzer Micro thumb drive with U3 on it. I had orginally gotten the drive when I had a HP that was running Windows XP. It worked fine on that computer. Well the XP machine took a crap and was replaced with a Compaq that is running Vista Home. The drive was NOT inserted with the HP crashed. Now when I insert the Thumb drive into a usb port it lights up and shows in "my computer" as an Audio CD with a drive letter of "H". The Launchpad does not start and the password screen does not come up either. The directory of the drive only shows 1 file (which does not open) and there was aprox 1000 files on it before. San Disk has been no help and I have not been able to find anything on the internet that has helped. Oh did I mention that I have very little computer knowledge, .
I normally would not be to ticked about this but all the files on the drive are family photos, photo's of hunting trips etc. I know my fault for not saving them to a CD and relying on a thumb drive but I thought they were more reliable than this. Here is a little twist, I have another Sandisk thumb drive that was used with the XP machine but this one works on the vista machine! I havent been able to try the drive that I am having trouble with on another XP machine as I dont have access to one (work switched all computers to vista). I dont know if it is a formatting issue or what but I can not figure it out.
Thumb Drive Storage System
Feb 25, 2009If I copy files to a thumb drive using Vista Home Premium what file storage system is used.
View 9 Replies View RelatedUSB Thumb Drives & Required Drive
Jun 8, 2008I have noticed that even after being told it is "safe to remove hardware" the light on the thumb drive doesn't go off and the next time I put it into the USB drive of my Vista machine, it always says that the drive needs to be scanned and fixed. If it was just one thumb drive, I would think it was the drive, but I get this with all of them, I have three Dane Elec drives, two Sony, a Memorex and a SanDisk Cruzer. Is this a bug that hasn't been worked out yet, or is there something I am missing?
View 6 Replies View RelatedThumb Drive Won't Trun On At Boot Time
Apr 18, 2009I have a PNY 16g thumb drive with both my msoffice and vista cd's copied to it and a few other things. When I boot, the drive isn't recognizedand doesn't turn on. If I pull it out and put it back in while vista is running it lights up and everything is fine.
View 9 Replies View RelatedWhy Isn't Thumb Drive Type Memory, Which Does Not Need A Battery, Used To Hold The BIOs
Apr 2, 2008Why isn't thumb drive type memory, which does not need a battery, used to hold the BIOs?
View 9 Replies View RelatedInstall Via Bootable USB Drive
May 7, 2008I had a fire a few months back which burnt my Acer T180 case. I've managed to change the case and get all the parts working again except the DVD rom which was melted and beyond repair. As my whole house is wireless I'm not really bothered about getting a new DVD rom - my other PC controls the network and has a DVD writer inside. Once vista is installed the network will take care of everything.
My problem now is how do I reinstall Vista on a PC that has no DVD rom to read my Vista DVD. OK I could swap my DVD around for a few hours by its covered in warranty void stickers and as its new I don't want to risk anything. Is there anyway to convert a Bootable DVD into a Bootable USB drive? I've got a 4 Gig stick which should be fine. My motherboard also boots from USB. I've managed to make a copy of the vista DVD into ISO image but can't find a program that will put the ISO onto a USB drive.
Make Drive Bootable?
Mar 26, 2008I have a dual boot setup where I boot from the first HD and start XP/Vista. Vista is installed on a separate disk. I don't use XP at all and want to remove that disk, but then I need to make the Vista disk bootable. The Vista install is on a raid volume. I googled a little bit and found some information about bootrec and tried to boot from the DVD and tried /fixboot, but nothing happens. When I load the recovery console it doesn't display any Vista installations, so I wasn't very surprised that bootrec failed. I then proceeded to load the driver for the raid controller, but still no installations are displayed. Is there a simple way to make a disk bootable for Vista - on a raid volume?
View 4 Replies View Related2 Computers 2 Locations: 1 USB Bootable Drive?
May 10, 2008I want to have 2 desktop computers, one in the city, one in the country, and carry one bootable USB drive between them. (And I would backup to a cloned, serial SATA drive, internal). I heard that from a HP support person that microsoft is planning to create this possibility in the future. What do you know about this. (And what searchable phrases might reveal their plans).
View 6 Replies View RelatedPreview Thumb Nail Size
Sep 11, 2008is it possible to have a larger thumb nail size on the task bar preview whan the mouse is placed on a task bar item
View 5 Replies View RelatedInstalling From Non-bootable DVD
May 22, 2008I had a bootable DVD from a friend of Vista Ultimate upgrade or fresh install. I had Home Premium pre-installed. I upgraded to the Ultimate through "Upgrade" and it was successful. But I lent the DVD to a friend, and I have now realised I want to reinstall. I have a non-bootable exact copy of the bootable disc. I can start fresh install from inside Windows, but I am wondering if it will work.
View 5 Replies View RelatedBootable OEM Recovery Cd
Oct 8, 2008i ask if someone may know of a way to create a bootable USB flash drive with a OEM Vista recovery CD. coz as you know now adays laptops have a recovery cd which is liable to be lost or scratched and the worse senario is when you had deleted the recovery partition. in that case your only hope is to order a new set of recovery cd from manufacturer which in my case didnt restore the recovery partition thats why i need to recover the system from an usb flash drive.
View 7 Replies View RelatedBootable Memory Stick?
May 13, 2009Looking for any information on prefered method for installing XP and/or Vista *to* a USB (8 gig) memory stick. The stick is to be used for troubleshooting purposes (ie booting up and scanning inoperative systems).
View 9 Replies View RelatedLooking For Bootable Command Prompt
Feb 13, 2010the thread title says it all: I'm looking for a lightweight bootable command prompt which supports ntfs drives and supports x64 command line tools. Something like Freedos x64 or command.com x64 (if they existed which unfortunately they don't).
So far, all I can do is to boot into Windows' own command shell, but this is far from being lightweight. Every Linux supports booting into a pure command line mode, so there must be something similar for Windows with x64 support. Basically, the recovery console would suffice if it allowed using external command line tools, but afaik this is not the case.
Bootable DVD Wont Boot
Apr 12, 2008I got vista given to me *_Leagly_* by a friend and have bought a serial. I want to make a copy of the disc incase the other one gets damaged. I just copied the files of the disc from the oringal disc from my dvd drive to another DVD-RW disc in another DVD-RW Drive. All the files are on there and when i run setup from an OS (like XP since i have vista and xp dual booting on my pc) it works fine. But when i try to boot from it it wont boot. I have set my DVD Drive to my 1st boot device and it will boot from the oringal alright but not the copied one. What am i doing wrong?
I currently dont have access to the oringal at this time but i have the files on the copied one. What do i have to do too the disc to make it bootable. i no this is vista 64 forums but mine is 32 bit. I dont want crapy posts from people saying anything about piracy and i tryied googleing it but without avale.
Setting Partition As Bootable
Jun 2, 2009I had a working Vista, but I had an issue with it and had to reinstall (because that is the solution to everything with windows). So I installed another Vista to another partition, but the problem is that the new Vista doesn't have the files required to boot because the older partition has. So how can I make my C: (new Vista) as bootable and delete D: (old Vista)?
View 8 Replies View RelatedWhy Keep Bootable Cd Or Dvd To Boot For System
Apr 23, 2009I recently install new hdd 500gb seagate, i install windows vista home prem sp1 , when i try to boot the system IT FREEZED on booting on black screen and it shows all the hardware install when put any bootable cd and boot the system, system boots fine, i had same issue with old sansung 80gb hdd, i have to keep the bootable cd in optical drive to boot the system, i also tried reseat the cables from optical drive but did not work, my optical drive works fine after boot in windows
View 5 Replies View RelatedIs Bootable Backup Program For (32-bit)?
Jan 1, 2008I'm looking for a backup program for Vista Home Premium that allows booting from DVD or CD-ROM in order to restore backups stored on DVD or CD-ROM.
View 5 Replies View RelatedMake A Bootable CD With Vista Sp1?
May 25, 2008My friend just bought an Acer computer with Vista SP1 on it. It came with no literature or CDs. Is there a way he can make a bootable CD with Vista Sp1 on it for emergencies?
View 6 Replies View RelatedMake Disk Bootable?
Mar 26, 2008I have dual boot and Vista is installed on drive D. I want to disconnect (remove) C drive and make D the only disk. How can I make it bootable? I do not have any programs installed yet.
View 4 Replies View RelatedHow To Make Disk Bootable?
Mar 23, 2008I have dual boot and Vista is installed on drive D. I want to disconnect (remove) C drive and make D the only disk. How can I make it bootable? I do not have any programs installed yet.
View 4 Replies View RelatedInstallation And Upgrading Failed Not Bootable
Mar 26, 2008I have downloaded Windows Vista Ultimate,and I burned to a CD but I forgott tu make it bootable,so I installed it like a software ,and it works fine.I installed it several times since I downloaded it and always go OK,but last time my windows was damaged,and I was unable to go in,so the only solution was to format my computer.I was not unable to install my Windows Vista Ultimate that I had downloaded because it was not bootable,so I bought e new Vista but with version Home Basic.I installed this windows,but after two days one update come in my computer and told me that my windows is pirated (fallse).
When I readed this,I wanted to install my Vista Ultimate like every time,but didn't work,I tried 4 times and still not worked,it showed me that Windows was not successfully installed,and it turned me back to Vista Home Basic.Now I tried to upgrade to my Vista Ultimate,all steps go OK,but to the step "Completing Upgrade"one error appeared "Windows could not configure one or more features.Please restart your computer and then restart the installation".
I have go to Microsoft Support,and I readed that I must disable some features, I have do that and when I tried to upgrade again,it stoped to the step "Expanding Files-21%" and showed me this error"Windows cannot install required files.Make sure all files for the installation are available and restart the installation.Error code:0x800706F8".I don't know what to do now when before I have disable some features,didn't shows me this error and all things go fine until step"Completing Upgrade".
Vista Bootable Disc From Download Purchase?
Aug 3, 2008I purchased my Vista through the Windows website and used the download option. I would like to have a hard copy installation disc. Is it possible to create a Vista disc from the download files?
View 2 Replies View RelatedHDD Died: Couldnt Find A Bootable Disk?
Jun 22, 2009I'm on my pc playing games and being bored everything fine and whatever. Got tired so I shut my pc off and then went to bed, ect. Got up in the morning turned my pc on and said it couldnt find a bootable disk or w/e it says when it finds no OS. (what ever happened also killed my Win7x64 on my other HDD)
I have 2 Seagate 500GB HDD each with a 32MB Cache. So what I did was formatted the win7 hdd and instead of x64 went x32 and got win7 back on. Now I was thinking that the HDD was completely dead and couldnt have anything done with it until today a friend of mine told me he had something similar happen and then his dad put some program on his computer and it fixed everything. Now if this is the case for me then I really would love to get this sorted out because this HDD has all my data from work on different things over the last 2 years and none of it is backed up.
Oh and the HDD that died has windows Vista Basicx32 on it. So basically I need to know if there is a possiblity that my HDD isn't dead and I can revive it and still use it. And if I can then how would I go about doing this?
DVD OEM Vista Ultimate X64 OS And No Bootable Media Found
Jul 30, 2009I just built a new computer and am trying to load and DVD OEM Vista ultimate x64 OS. I have 4 SATA hard disks and 1 SATA Sony bdu-x10s blu-ray drive. I have configured the 4 HDDs in Bios for RAID0. I also set BIOS to boot from the Sony drive only.
When I put the Vista disk in and power on the computer I notice that it loads the HDDs very quickly and sits on the Sony for a long time ~30 seconds. then it checks the disk and says no bootable media found. I observed that if I remove the disk and power on the computer the Sony drive loads just as quickly as the HDDs
Unable To Find "E" Bootable
Mar 14, 2010I will start at the beginning as think always the best way. My first disk has partitions C/D My C drive is rapidly running out of space 30GB allocated to C on a 160GB drive rest is drive D I want to resize it so I've got about 60GB on C Windows will not let me shrink the D drive, and then expand the C drive, as it has page files on it. So what I have done using Acronis is clone Disk C/D to another much bigger disk, creating partions E/F. What I would like to do is now make the first partition E, which is a clone of C, bootable so that I can then format partitions C/D then reclone E/F back to C/D after sizing them more prudently. I cannot find how to make E bootable if in fact it is?
View 9 Replies View RelatedCloning A Drive: Tranfer Entire Drive Incuding All Files And The Operating System From Current IDE HDD To A New SATA Drive
May 2, 2008I am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
My Docs On E Drive, Not C Drive: How I Go About Changing That So The Default Is My Documents On The E Drive
Jan 2, 2010I'm running Vista on a PC that has a hd that has been formated into 3 discrete drives.Vista is loaded onto the C drive, programmes are loaded onto the d drive while i have my data stored on my E drive. By default any documents I save are directed towards My Documents on the C drive - how I go about changing that so the default is my Documents on the E drive?
View 9 Replies View RelatedUsb External Hard Drive Plugged In And The Drive Has Been Emptied And Replaced By Windows
Mar 23, 2008when booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
View 9 Replies View Related