I have a PNY 16g thumb drive with both my msoffice and vista cd's copied to it and a few other things. When I boot, the drive isn't recognizedand doesn't turn on. If I pull it out and put it back in while vista is running it lights up and everything is fine.
View 9 RepliesI've had Vista x64 installed for about 2 full months now and I've recently begun having a lot of problems. One being: 187 seconds. What the hell? Before you ask, here are my specs. Lots of fast memory, a fast processor, 7200RPM boot drive (not listed), and ****ing awful performance. What gets me is that the delayed boot time is before I even see the "Welcome" screen.
My current boot time distribution:
1. BIOS does all its fancy stuff very quickly (about 6-7 seconds or so)
2. I get to my boot loader and it defaults to Vista after 5 seconds (dual-booting Vista/Ubuntu).
3. I then see the Vista loading screen (black screen with green loading bar) for about 4-5 seconds................
Before I remove a USB thumb drive, I click the green check from notification area; I click the message that appears next to the green check, Safely remove USB Mass Storage Device - drives (F:, G; then a dialog box appears that states, This device can now be safely removed from computer.
The light on the thumb drive, however, stays lighted. I previously followed a procedure where the light would go off on the thumb drive when I did a Safely Remove.
Should the light on the thumb drive go off before it can be safely removed? If so, how do I get the thumdrive light to go off?
Can you use a thumb drive as a bootable floppy? For such things as updating the BIOS? I don't have a physical floppy drive and it appears that without it you can't update the bios. Never had a thumb drive before and their really cheap now. Just wanted to know how do you go about making it bootable and such if this is doable!
View 5 Replies View RelatedI have this 2.0 gb thumb drive that was given to me. How can I tell if it's bootable or not. It does not have a brand name on it.
View 6 Replies View RelatedI have a San Disk 4GB Cruzer Micro thumb drive with U3 on it. I had orginally gotten the drive when I had a HP that was running Windows XP. It worked fine on that computer. Well the XP machine took a crap and was replaced with a Compaq that is running Vista Home. The drive was NOT inserted with the HP crashed. Now when I insert the Thumb drive into a usb port it lights up and shows in "my computer" as an Audio CD with a drive letter of "H". The Launchpad does not start and the password screen does not come up either. The directory of the drive only shows 1 file (which does not open) and there was aprox 1000 files on it before. San Disk has been no help and I have not been able to find anything on the internet that has helped. Oh did I mention that I have very little computer knowledge, .
I normally would not be to ticked about this but all the files on the drive are family photos, photo's of hunting trips etc. I know my fault for not saving them to a CD and relying on a thumb drive but I thought they were more reliable than this. Here is a little twist, I have another Sandisk thumb drive that was used with the XP machine but this one works on the vista machine! I havent been able to try the drive that I am having trouble with on another XP machine as I dont have access to one (work switched all computers to vista). I dont know if it is a formatting issue or what but I can not figure it out.
If I copy files to a thumb drive using Vista Home Premium what file storage system is used.
View 9 Replies View RelatedI have noticed that even after being told it is "safe to remove hardware" the light on the thumb drive doesn't go off and the next time I put it into the USB drive of my Vista machine, it always says that the drive needs to be scanned and fixed. If it was just one thumb drive, I would think it was the drive, but I get this with all of them, I have three Dane Elec drives, two Sony, a Memorex and a SanDisk Cruzer. Is this a bug that hasn't been worked out yet, or is there something I am missing?
View 6 Replies View RelatedWhy isn't thumb drive type memory, which does not need a battery, used to hold the BIOs?
View 9 Replies View RelatedI've got an Sony VGN-BX197XP laptop that I've upgraded to Windows Vista Ultimate. Since then I've encountered some strange display-related issues:
1) I could only boot into Aero about 50% of the time. The rest of the time I forced onto the Standard theme with no Aero option. Since installing Vista SP1 I can't get Aero at all.
2) When not running in Aero mode I can't get the Windows Media Player to play video files, nor get a Perfomance Index.
3) If I plug in an external monitor I can't get a picture on the laptop monitor but I *do* get a picture on the external monitor and it runs Aero 100% of the time. It will also play video files and give me a performance index.
I recently went into Change Date & Time Internet time tab and chose a time standard to connect with. After doing that I went onto the internet and connected with time.nist.gov and checked the time. After that I was no longer able to go into the internet time tab. It tells me that time.nist.gov is the time connection and I can't change it. It tells me I need to have permission to do this as administrator. I am the administrator! What goes here?
View 6 Replies View RelatedI used to be able to boot up in no time. The microsoft vista "lightbar" used to scroll left to right about 5 times. Now, it scrolls 43 times.
I did the Visual basic test that I found here and my boot up time is 155 seconds. I do know part of my problem is my antivirus but looking around I found more problems.I have major bootup errors in the event log.
Installed the SP1 sent to me in the Windows updates a few days ago and machine has been slow to boot and generally slow ever since. It was very much faster before SP1. I have a Vista Ultimate 64 bit machine, 2 gigs ram, more than enough disk space left (320gig drive half full) etc. The only change was putting in SP1. Thinking that this could have been some sort of stuffup between Mcafee AV and this new SP1 I uninstalled it and it did make things slightly better as expected but of course I put it back and things were as bad as ever. I note, on web sites, that this is a commonly reported problem with SP1 from pre-release days. So, anyone know any way to fix it and if not, when MS will fix that?
View 9 Replies View RelatedI have a Lenovo T400 - T9400 (2.53 GHz C2D) - 4GB DDR3-1066 - Vista Business x64
How can I speed up my Vista boot time? Currently it takes between 75-85 seconds to boot into a usable state.
Once in Vista, my laptop is very fast, and I have no complaints.
I did a clean install of Vista.
I've already disabled many services and startup programs.
I did a bunch of little tweaks I found on different sites as well like disabling indexing, tmm, system restore.
The main thing that seems to be slowing the boot process is between the BIOS and login prompt.
There is a period of at least 15-20 seconds where the screen is black or barely doing anything before it jumps to login.
I tried going into the BIOS and making sure things are in order. I put the HD as the first boot device instead of CD (probably didn't save much time).
Is there something I can do to speed that time up?
I have all the latest windows updates installed, including Service Pack 2. I also have latest BIOS installed. I have already configured msconfig for start up applications and services. But, still my computer boots very slowly. Right now it takes about 1 minute and 20 seconds to boot up.
View 9 Replies View RelatedI use a hp pavilion laptop with 2 gb ram and centrino1.73ghz c2d vista ultimate 64bit.
most of the times when i press power button(when my laptop is switch off or say shut down)the very "first screen" which shows hp logo,intel logo and phoenix logo along with press del and press f options remains for too long and i mean too long i.e. nearly 160 seconds.but this problem occurs 8 outta 10 times.and whenever this problem occurs , cd rom icon from "my computer" window disappears and thus i cant use my cd/dvd rom.bt when on switching on the "first screen" shows for a fraction of a second then everything works fine and cd/dvd rom appears in "my computer" window.i thought that there might be some problem in my hdd so i did a factory reset(i.e. recovery) bt to my disappointment nothing went right.the problem exists as it happened to be.
Why is it that when Linux boots up and the desktop is on the screen the hard drive stops it's activity, But when Vista boots up and the GUI is up on the screen the hard drive light keeps up high activity for another 5 minutes?
View 7 Replies View RelatedI'm currently experiencing an issue with a Visa Business laptop where it had suddenly been taking approximately 20 minutes to boot, after running various virus scans and checking through the boot logs I was unable to find a solution and as such decided to reinstall Windows to resolve my problem. However, I have found that even after completely reformatting the drive and reinstalling Windows Visa I am still experiencing this extremely long boot time. I have observed that the long boot time does not occur if I select to boot in to safe mode, and for a large majority of the time when the computer is booting the hard disk activity light isn't even flashing with Windows freezing on some attempts while booting.
To attempt to see if this was a hardware issue I downloaded a copy of Linux Mint onto a DVD and booted from it, as expected it booted extremely fast (for a disk) compared to Windows. Being unable to fix the problem myself I have decided to finally request help from people whom would be more knowledgable in this area than me :P To assist in finding the resolution of my problem I have included a copy of the bootlog (I have disabled the drivers that do not load and have noticed no difference in the overall boot time).
With a formated hard drive on a Dell Dimension 2350, the Vista Home Premium Install Disk took eight minutes to get to the first screen. I subsequently cleaned out all cards from PCI slots and disabled everything I could in the BIOS and got the same results.
View 4 Replies View RelatedI did all the speed up vista opptions that are on this web page....i cant understand this..it never use to be like this befor it would take like 87 secs
View 9 Replies View RelatedI've recently put together a new computer using these parts: I've updated to Vista Ultimate SP1, run multiple disk clean ups, defrags, use CCleaner, clean the registry, defrag the registry, disabled services and have made tweaks according to the guide provided on this website and have minimal startup programs running but my boot times average around 2 minutes. For a new computer with new hardware, this seems unreasonable as many users report boot times between 30-60 seconds. What could be wrong with my computer? On the vista loading screen with the green bar, it goes through about 22 cycles.
View 5 Replies View RelatedIs 144 seconds a normal,good or problematic boot time?
View 9 Replies View RelatedIs there any software that show what process is currently starting and running on screen in real time? I have Vista Ultimate. Somewhere along the startup of Vista there is a long wait. I think the perpetrator is the AppLauncher in the Vista Sidebar containing too many icons. In fact 56 of them. I guess the wait is while hte software is locating all relevant folders. But then again, I really don't know, as the wait is still there even when the sidebar start up is disabled. All I want is a few words on screen stating that this or that process is now starting... The list of started processes I can see in my Sysinternals Process Explorer. Do you guys know of such a ultility?
View 8 Replies View RelatedAm running Vista 64 Business on XFX 680i Sli LT with 2Gb ram, Quad core 6600, 600GT video. System runs fine, but I want more memory to help performance. When I try to install additional 2Gb, I get a blue-screen every time I boot (some blue screens have an IRQL_NOT_LESS_THAN_OR_EQUAL, most have no error msg). Is there a way to determine if my installation of Vista already has this installed? I've already checked the Control Panel/Windows Update/Review Update History, it's not in there, I thought it may be in the core install on the DVD?
View 9 Replies View RelatedParagon Drive Backup 8.51 Personal Edition. I have a old backup made in XP on a stationary computer. Now im restoring it on my laptop with Vista on the D: drive. It started after the reeboot and have now been running for more than 20 hours - and still running. The backupfile was about 50GB. How long time will it take to restore? I have seen severel pictures, movies, documents and temp. internetfiles running, but that was hours ago. My labtop have 3GB RAM, 2,000 HZ and there was about 73GB avalible on the D: drive.
View 5 Replies View RelatedI've upgraded my machine at some point in the last year, where I added a new 500GB drive and moved my C: partition across to it. The previous 250GB drive was left in for additional storage. Just recently (while upgrading my BIOS) I realised that my system was still booting from the 250GB drive even though Windows was on the other disk. There is a fair possibility in the not too distant future that I'll replace the 250GB disk with a larger disk, in which case I won't be able to boot. Is there a safe and reliable way to change it so that the system boots from the 500GB disk?
View 9 Replies View Relatedthis is my 3rd fresh clean install, using both vista x86 and x64, and all new hardware as well (new mobo, hd's, cpu, ram, etc):
symptom:
after a day of two of creating a user account, the hd access starts to become excruciatingly slow, and gets slower with time. when you use explorer and want to access the hard drives, the system takes 3-7 seconds to open the folder. when browsing pictures, it takes 3-6 seconds to switch to the next, etc.
creating a new user account solves the problem temporarily, until a day or two passes, and then the same thing starts to happen!
what i've tried so far:
- disabled indexing (windows search service)
- disabled hard drive indexing
- tried booting up as ide, as well as ahci
- created new install with raid0, and same issue.
system:
* e8400
* asus p5q-e with latest bios
* 2 x 320 wd 3200aaks sata drives, 1 x 250 wd 2500aaks sata drive
* asus sata dvdrw drive
* 4 gb crucial ballistix pc2-6400 (ddr2-800)
i've noticed this problem accelerates even more when using the "sleep" power mode. but even when disabling this, it still happens.
i've googled for over 2 weeks. i've done 3 fresh installs, i've replaced all the hw, and used 3 different copies of vista ultimate, with same results!
update: here is a video of the problem:
Internet - windows vista hard drive performance issue
I am trying a new install on a new machine. I have 2 WD 250 GB drives (not in RAID config). When VISTA installs it tells me the first drive is not recognized as boot drive and won't load. I tried to install on second drive and get a error message about a volume does not meet VISTA criteria (or something like that)and won't install. These are both brand new drives. Both drives are correctly identified in the BIOS.
View 7 Replies View RelatedRight now i am booting off of an 80gb IDE hard drive but i want to clone the drive onto a 150gb sata drive and make the sata drive my boot drive. I have used Acronis True Image to clone the hard drive. I restarted and everything copied over in DOS successfully but then i tried to boot off of the sata drive and everything seemed to work out fine.. Vista load bar showed up, i was able to enter my password to log in and then it said preparing desktop like it was the first time i installed vista. It was stuck on that screen for a few mins and then a blank blue screen just came up. it seemed like it was the default background for Windows 2000 or something like that and it just stayed there. So now i'm back to booting off of the IDE drive...
View 5 Replies View RelatedI have a dual boot system: XP PRO on drive C and Vista Home Premium on drive B. I want to replace my hardrive, and move (or clone) Vista to new drive and be it C drive. Vista is still virgin and not other programs are installed, so changing it location from D to C drive will not influance any applications. I know how to create hard drive image. My question is how to make that new c drive with Vista on it bootable again. Is there any utility I can use?
View 4 Replies View Relatedis it possible to have a larger thumb nail size on the task bar preview whan the mouse is placed on a task bar item
View 5 Replies View Related