I use a hp pavilion laptop with 2 gb ram and centrino1.73ghz c2d vista ultimate 64bit.
most of the times when i press power button(when my laptop is switch off or say shut down)the very "first screen" which shows hp logo,intel logo and phoenix logo along with press del and press f options remains for too long and i mean too long i.e. nearly 160 seconds.but this problem occurs 8 outta 10 times.and whenever this problem occurs , cd rom icon from "my computer" window disappears and thus i cant use my cd/dvd rom.bt when on switching on the "first screen" shows for a fraction of a second then everything works fine and cd/dvd rom appears in "my computer" window.i thought that there might be some problem in my hdd so i did a factory reset(i.e. recovery) bt to my disappointment nothing went right.the problem exists as it happened to be.
With a formated hard drive on a Dell Dimension 2350, the Vista Home Premium Install Disk took eight minutes to get to the first screen. I subsequently cleaned out all cards from PCI slots and disabled everything I could in the BIOS and got the same results.
Recently I have bought Vista Home Premium x64 and to be honest I am having quite annoying issue with this OS . I had installed Vista on RAID0 partition. Additionally I have three other sata drives for my data . I noticed that from time to time when I am working on vista , system freeze for 2-3 sec then everything is fine and I can continue work. Particulary when for example I am opening some application or even windows explorer , my computer etc. (when it hangs I can't move my mouse). Moreover when it freeze I "hear" something inside my computer case as if my computer weak up from hibernation.
A short time ago I solved following error: "Error 49: Volmgr. Conf page file for crash dump failed". Thanks to a guru here in this forum, he told me to enter into System/Advanced/Performance Settings/.../Virtual Memory Change, and check the “Automatically manage paging file size”. The error reporting stopped, everything OK so far. However, after that moment my Vista uses extremely long time to shut down, up to 2 minutes. No error reports, nothing wrong as far as I can see, my Vista works perfectly well, and has a very quick start up.
Have HP DV5Z-1100 Notebook running Vista home premium 32 bit. Machine is running on the power supply Put to sleep using Function F5.
Machine sleeps, all indicators off except power light and light on power button which blink at 2 second intervals. Machine will sleep as long as 12 hours or more, but will also power off possibly in less time.
Hitting the power button wakes machine with message, "Resuming Windows"
when I install x64 XP, i have no troubles, but when I try to install Vista od Seven, both x64, installation takes ages... it does install at the end, but it just takes too long (read: 2 hours). After instalation, it continues to be slow, both of the cores are at 100%. I've search for a while for a solution, but I've found different answers for the same problem, none of them works. Is there anyone with the same/simmilar configuration and has no troubles with vista?
I have a Vista Business and a Vista Ultimate laptop. I'm trying to join a Windows 2008 domain. It takes forever for both machines to join the domain. If I let it sit it eventually does maybe 40 minutes later. Then when I log off it takes about the same amount of time to log off? It seems like it eventually joins the domain but takes a VERY long time. I don't have this same issue with Windows XP machines..
When you click shut down, Vista doesn't shut down, or do anything for that matter. If it cannot terminate all processes, in about 3 to 5 minutes it will pop up this screen that say like "this process is hanging, click here to terminate and shut down" or something like that.
I bought the Vista Home Premium Upgrade and when I went to install it, I chose to do a fresh install. When my PC restarted the screen was blank for a really long time, then the mouse arrow popped up and the screen was still blank. I checked the Hard Drive light and it wasn't blinking. I put my ear to my PC to see if I could hear it working and it was just running normally. I turned my PC off and I can't install Vista now. It says to start the installation from XP with the key that I'm using.
The problem is that XP came with my PC in a partition of the hard drive. I can't access the partition anymore. I hate the fact that I didn't recieve a disk with the operating system that my PC came with, and I will never buy another PC with the restoration and installation files in a partition. I can't even format my hard drive in BIOS because of the way it's set up. s there anything I can do other than calling the company to get an XP start up disk which I was told will cost me $40-$80?
my vista mail takes a very long time when I have something attached to the outgoing mail. Even a very small attachment of 9 kbytes takes about 30 seconds. I have vista ultimative 64 bit danish version sp1. I have tried to disable antivirus/firewall but it is still the same. Prolonging the servers responstime in account options to 1 minut..doesn? A mail with no attachment sends right away.
So basically it takes 4 hours to install it completely. It used to take 45 minutes to install. I've install it maybe 10 times as I have been switching to Windows and Linux back and forth on the same computer. Is there a way to get another one or fix it? I don't know if anyone can help me with this but I thought I could try.
Paragon Drive Backup 8.51 Personal Edition. I have a old backup made in XP on a stationary computer. Now im restoring it on my laptop with Vista on the D: drive. It started after the reeboot and have now been running for more than 20 hours - and still running. The backupfile was about 50GB. How long time will it take to restore? I have seen severel pictures, movies, documents and temp. internetfiles running, but that was hours ago. My labtop have 3GB RAM, 2,000 HZ and there was about 73GB avalible on the D: drive.
I have a folder with about 142 gigs of files in it and when I open it up, it takes sometimes 15 sec. before anything shows in the folder, while the little strip across the top of the folder does its "Progress" thing. Yes, I have Indexing on for that partition (this is a partition of my main hard drive; it is a 566g partition used only for archiving and it has 126gigs left).
What strikes me as particularly stupid about this is that it does the "progress" thing EVERY time, even if I close it and open it again 10 seconds later, it does not "remember" the indexing or whatever it just did! Is there any way to fix this? Seems absolutely ridiculous to have a super fast computer that can't find files in a folder without waiting 15 seconds!
I have a Toshiba laptop with 2Gb Ram, running Vista. I have no major problems, but my pc does seem to take a long time to start up and to load / run large files, and sometimes seems to go into a coma. I use CCleaner and Defraggler, and I uninstall/delete anything that I dont need. But my pc does seem to be struggling sometimes. I could add another 2Gb Ram, or I could upgrade to Windows 7 (which I read has much lower overheads??). Or perhaps I should buy a new PC? My question is, how do I decide what the best route is??
I am running Windows Vista Home premium 64bit with 8gb ram and an hp c309a printer. My problem is that vista take a long time to print even just a 1 word paper using notepad. Also when i right click the printer in the printer folder it also take time to open the properties, aprox 3 minutes. So if i try to print it takes 3 minutes just to open the tab to click print and to select the printer i wish to use. The c309a is connected by usb cable, and i have tried re-installing the latest drivers and firmware for the printer as well as different usb cables and each of my usb ports. Yet for some reason there is a long 3+ minute pause when trying to print. I have also tried using the network feature and I still have same trouble. Also i have checked to make sure print spooling is on in services. HP has a utility to check for issues for both network and for usb, and the printer passes each test fine. I have done so many full uninstalls and installing of the software as well as the cable changes it is driving me nuts. I have been google'ing for days and days and have had no luck in fixing this issue. One last comment every time i try to print the applications I am using freeze for the 3+ minutes and the window application shows "application not responding", but after 3+ minutes i can finally select the printer and hit print, then at that point it freezes again for about 2 minutes and then prints. I have run multiple virus scans and multiple spyware detection programs and have also run online virus scans using bitdefend and trendmicro as well and i have no virus or spyware. I have also ran "hijackThis" and been told my system appears clean.
i am new to this forum but i have problem with my system bootup. my system takes too long to boot and it started 3days ago. it takes about 120secs at bootscreen alone. i believe it is not my start up programs as it takes about 3 secs to start up from login page. i donot use any third party bootscreen. normally, my system boots in 30 secs but now i am facing a lot of problem which i do not understand. i have tried all the tutorials in this forum relating to bootup problems but found no luck.
Im having a problem with my mouse, it started a couple of days ago, it keeps sticking for about 5 seconds at a time and a "bink" sound starts as if its trying to find it, i cant do anything with the mouse at all. Occationally in the bottom right corner a symbol comes up with. "One of the USB devices attached to this computer has malfuctioned and Windows does not recognise it. The location of the device is shown in bold type". The problem is there is nothing in bold type, its getting really annoying now. Ive cranked up Norton and theres no viruses ect on my comp
Boot from a cold start now takes about 95 seconds. Standby takes 9 seconds. Recover from standby takes about 5 seconds. Shutdown takes 24 seconds. I've already reduced WaitToKillServiceTimeout to 5 seconds, with no apparent penalty. There are no unnecessary startups, though I have not begun snipping away Services. What else can I do to accelerate both ends of the cycle?
I've got an Sony VGN-BX197XP laptop that I've upgraded to Windows Vista Ultimate. Since then I've encountered some strange display-related issues:
1) I could only boot into Aero about 50% of the time. The rest of the time I forced onto the Standard theme with no Aero option. Since installing Vista SP1 I can't get Aero at all.
2) When not running in Aero mode I can't get the Windows Media Player to play video files, nor get a Perfomance Index.
3) If I plug in an external monitor I can't get a picture on the laptop monitor but I *do* get a picture on the external monitor and it runs Aero 100% of the time. It will also play video files and give me a performance index.
I'm running a clean install of Home Premium. I basically rebuilt my computer to run vista. The problem is that when I boot, it gets past my normal boot screen (where you enter your bios options) and goes to a black screen. Then after several minutes (3-5) I get the green vista progress bar and the computer boots into Vista. Once i'm in, it's a screaming machine. Works great, I've got a WEI of 4.4. Anyone know why the boot up takes SOOOO long?
I have a totally top of the range laptop, I am not running any of the things like Norton that are known to cause performance problems (I use AVG anti-virus). I have heaps of RAM and disk-space, a fast Intel Core2 Duo chip, yet my computer is slower than my previous seven year old one (that was running XP). It takes about 3 seconds to display things like the Windows Explorer window or about 6 or 7 seconds to bring up Firefox or IE. and about 10 or 11 seconds the first time I open Outlook. That is not taking into account the time it takes to download the web page or retieve my mail. I am using the default settings in Vista, are there features in Vista (I know it monitors everything) that could be slowing me down this much?
When I launch Vista 64 Ultimate, my harddrive light shows activity for 7 to 10 minutes. Is this normal or do I have something turned on that I can turn off? I run AVG antivirus, I'm going to check and see if it's doing a boot scan. But the disk activity is something like that....for a very long time.
I recently went into Change Date & Time Internet time tab and chose a time standard to connect with. After doing that I went onto the internet and connected with time.nist.gov and checked the time. After that I was no longer able to go into the internet time tab. It tells me that time.nist.gov is the time connection and I can't change it. It tells me I need to have permission to do this as administrator. I am the administrator! What goes here?
I've had Vista x64 installed for about 2 full months now and I've recently begun having a lot of problems. One being: 187 seconds. What the hell? Before you ask, here are my specs. Lots of fast memory, a fast processor, 7200RPM boot drive (not listed), and ****ing awful performance. What gets me is that the delayed boot time is before I even see the "Welcome" screen.
My current boot time distribution: 1. BIOS does all its fancy stuff very quickly (about 6-7 seconds or so) 2. I get to my boot loader and it defaults to Vista after 5 seconds (dual-booting Vista/Ubuntu). 3. I then see the Vista loading screen (black screen with green loading bar) for about 4-5 seconds................
I used to be able to boot up in no time. The microsoft vista "lightbar" used to scroll left to right about 5 times. Now, it scrolls 43 times.
I did the Visual basic test that I found here and my boot up time is 155 seconds. I do know part of my problem is my antivirus but looking around I found more problems.I have major bootup errors in the event log.
Installed the SP1 sent to me in the Windows updates a few days ago and machine has been slow to boot and generally slow ever since. It was very much faster before SP1. I have a Vista Ultimate 64 bit machine, 2 gigs ram, more than enough disk space left (320gig drive half full) etc. The only change was putting in SP1. Thinking that this could have been some sort of stuffup between Mcafee AV and this new SP1 I uninstalled it and it did make things slightly better as expected but of course I put it back and things were as bad as ever. I note, on web sites, that this is a commonly reported problem with SP1 from pre-release days. So, anyone know any way to fix it and if not, when MS will fix that?
I have a Lenovo T400 - T9400 (2.53 GHz C2D) - 4GB DDR3-1066 - Vista Business x64
How can I speed up my Vista boot time? Currently it takes between 75-85 seconds to boot into a usable state. Once in Vista, my laptop is very fast, and I have no complaints. I did a clean install of Vista. I've already disabled many services and startup programs. I did a bunch of little tweaks I found on different sites as well like disabling indexing, tmm, system restore.
The main thing that seems to be slowing the boot process is between the BIOS and login prompt. There is a period of at least 15-20 seconds where the screen is black or barely doing anything before it jumps to login.
I tried going into the BIOS and making sure things are in order. I put the HD as the first boot device instead of CD (probably didn't save much time).
Is there something I can do to speed that time up?
I have all the latest windows updates installed, including Service Pack 2. I also have latest BIOS installed. I have already configured msconfig for start up applications and services. But, still my computer boots very slowly. Right now it takes about 1 minute and 20 seconds to boot up.
Why is it that when Linux boots up and the desktop is on the screen the hard drive stops it's activity, But when Vista boots up and the GUI is up on the screen the hard drive light keeps up high activity for another 5 minutes?
