So basically it takes 4 hours to install it completely. It used to take 45 minutes to install. I've install it maybe 10 times as I have been switching to Windows and Linux back and forth on the same computer. Is there a way to get another one or fix it? I don't know if anyone can help me with this but I thought I could try.
View 7 Replieswhen I install x64 XP, i have no troubles, but when I try to install Vista od Seven, both x64, installation takes ages... it does install at the end, but it just takes too long (read: 2 hours). After instalation, it continues to be slow, both of the cores are at 100%. I've search for a while for a solution, but I've found different answers for the same problem, none of them works. Is there anyone with the same/simmilar configuration and has no troubles with vista?
View 8 Replies View RelatedWith a formated hard drive on a Dell Dimension 2350, the Vista Home Premium Install Disk took eight minutes to get to the first screen. I subsequently cleaned out all cards from PCI slots and disabled everything I could in the BIOS and got the same results.
View 4 Replies View RelatedI was trying to do a system restore – I went through the normal steps, (may be that was a mistake to start with) clicked on “restore to an earlier date" and selected 24 Aug. 30 hours later the restore is still running –the green line is still going across the bottom of the screen. Not sure what to do now – If I pull the plug on the PC what will or might happen? I have a HP Pavillion Elite M9351 with Vista Ultimate 64
View 5 Replies View RelatedWhenever I download a huge setup file (such as a game or game demo 500MB or more) UAC takes a long time and the system becomes unresponsive. How can I fix this?
View 4 Replies View RelatedI use a hp pavilion laptop with 2 gb ram and centrino1.73ghz c2d vista ultimate 64bit.
most of the times when i press power button(when my laptop is switch off or say shut down)the very "first screen" which shows hp logo,intel logo and phoenix logo along with press del and press f options remains for too long and i mean too long i.e. nearly 160 seconds.but this problem occurs 8 outta 10 times.and whenever this problem occurs , cd rom icon from "my computer" window disappears and thus i cant use my cd/dvd rom.bt when on switching on the "first screen" shows for a fraction of a second then everything works fine and cd/dvd rom appears in "my computer" window.i thought that there might be some problem in my hdd so i did a factory reset(i.e. recovery) bt to my disappointment nothing went right.the problem exists as it happened to be.
To keep the battery for a longer life what is the best:
1. using the mainpower : removing the battery and performing regularly a decharging and recharging?
2. using the mainpower : keeping the battery into the PC and performing regularly a decharging and recharging?
3. only working with the battery and of course performing the charging when needed?
A short time ago I solved following error: "Error 49: Volmgr. Conf page file for crash dump failed". Thanks to a guru here in this forum, he told me to enter into System/Advanced/Performance Settings/.../Virtual Memory Change, and check the “Automatically manage paging file size”. The error reporting stopped, everything OK so far. However, after that moment my Vista uses extremely long time to shut down, up to 2 minutes. No error reports, nothing wrong as far as I can see, my Vista works perfectly well, and has a very quick start up.
View 3 Replies View RelatedHave HP DV5Z-1100 Notebook running Vista home premium 32 bit.
Machine is running on the power supply Put to sleep using Function F5.
Machine sleeps, all indicators off except power light and light on power button which blink at 2 second intervals.
Machine will sleep as long as 12 hours or more, but will also power off possibly in less time.
Hitting the power button wakes machine with message, "Resuming Windows"
Loaded latest version of BIOS as per HP support
Reinstalled Power Manegement as per HP support.
I have a Vista Business and a Vista Ultimate laptop. I'm trying to join a Windows 2008 domain. It takes forever for both machines to join the domain. If I let it sit it eventually does maybe 40 minutes later. Then when I log off it takes about the same amount of time to log off? It seems like it eventually joins the domain but takes a VERY long time. I don't have this same issue with Windows XP machines..
View 6 Replies View RelatedWhen you click shut down, Vista doesn't shut down, or do anything for that matter. If it cannot terminate all processes, in about 3 to 5 minutes it will pop up this screen that say like "this process is hanging, click here to terminate and shut down" or something like that.
View 9 Replies View RelatedI bought the Vista Home Premium Upgrade and when I went to install it, I chose to do a fresh install. When my PC restarted the screen was blank for a really long time, then the mouse arrow popped up and the screen was still blank. I checked the Hard Drive light and it wasn't blinking. I put my ear to my PC to see if I could hear it working and it was just running normally. I turned my PC off and I can't install Vista now. It says to start the installation from XP with the key that I'm using.
The problem is that XP came with my PC in a partition of the hard drive. I can't access the partition anymore. I hate the fact that I didn't recieve a disk with the operating system that my PC came with, and I will never buy another PC with the restoration and installation files in a partition. I can't even format my hard drive in BIOS because of the way it's set up. s there anything I can do other than calling the company to get an XP start up disk which I was told will cost me $40-$80?
my vista mail takes a very long time when I have something attached to the outgoing mail. Even a very small attachment of 9 kbytes takes about 30 seconds. I have vista ultimative 64 bit danish version sp1. I have tried to disable antivirus/firewall but it is still the same. Prolonging the servers responstime in account options to 1 minut..doesn? A mail with no attachment sends right away.
View 4 Replies View RelatedParagon Drive Backup 8.51 Personal Edition. I have a old backup made in XP on a stationary computer. Now im restoring it on my laptop with Vista on the D: drive. It started after the reeboot and have now been running for more than 20 hours - and still running. The backupfile was about 50GB. How long time will it take to restore? I have seen severel pictures, movies, documents and temp. internetfiles running, but that was hours ago. My labtop have 3GB RAM, 2,000 HZ and there was about 73GB avalible on the D: drive.
View 5 Replies View RelatedI have a folder with about 142 gigs of files in it and when I open it up, it takes sometimes 15 sec. before anything shows in the folder, while the little strip across the top of the folder does its "Progress" thing. Yes, I have Indexing on for that partition (this is a partition of my main hard drive; it is a 566g partition used only for archiving and it has 126gigs left).
What strikes me as particularly stupid about this is that it does the "progress" thing EVERY time, even if I close it and open it again 10 seconds later, it does not "remember" the indexing or whatever it just did! Is there any way to fix this? Seems absolutely ridiculous to have a super fast computer that can't find files in a folder without waiting 15 seconds!
I have a Toshiba laptop with 2Gb Ram, running Vista. I have no major problems, but my pc does seem to take a long time to start up and to load / run large files, and sometimes seems to go into a coma. I use CCleaner and Defraggler, and I uninstall/delete anything that I dont need. But my pc does seem to be struggling sometimes. I could add another 2Gb Ram, or I could upgrade to Windows 7 (which I read has much lower overheads??). Or perhaps I should buy a new PC? My question is, how do I decide what the best route is??
View 9 Replies View RelatedI am running Windows Vista Home premium 64bit with 8gb ram and an hp c309a printer. My problem is that vista take a long time to print even just a 1 word paper using notepad. Also when i right click the printer in the printer folder it also take time to open the properties, aprox 3 minutes. So if i try to print it takes 3 minutes just to open the tab to click print and to select the printer i wish to use. The c309a is connected by usb cable, and i have tried re-installing the latest drivers and firmware for the printer as well as different usb cables and each of my usb ports. Yet for some reason there is a long 3+ minute pause when trying to print. I have also tried using the network feature and I still have same trouble. Also i have checked to make sure print spooling is on in services. HP has a utility to check for issues for both network and for usb, and the printer passes each test fine. I have done so many full uninstalls and installing of the software as well as the cable changes it is driving me nuts. I have been google'ing for days and days and have had no luck in fixing this issue. One last comment every time i try to print the applications I am using freeze for the 3+ minutes and the window application shows "application not responding", but after 3+ minutes i can finally select the printer and hit print, then at that point it freezes again for about 2 minutes and then prints. I have run multiple virus scans and multiple spyware detection programs and have also run online virus scans using bitdefend and trendmicro as well and i have no virus or spyware. I have also ran "hijackThis" and been told my system appears clean.
View 9 Replies View RelatedI recently went into Change Date & Time Internet time tab and chose a time standard to connect with. After doing that I went onto the internet and connected with time.nist.gov and checked the time. After that I was no longer able to go into the internet time tab. It tells me that time.nist.gov is the time connection and I can't change it. It tells me I need to have permission to do this as administrator. I am the administrator! What goes here?
View 6 Replies View RelatedI'm running (factory installed) Vista Ultimate 64-bit on a new (3 month old) HP w1907 desktop computer. HP Update recommends downloading and installing "NVIDIA Unified Graphic Update", 74.4 MB, taking an estimated 4.3 hours on my dial-up connection. Reason given has something to do with recovery from sleep mode - which I never use. Nevertheless, I decided to download and install the update.
View 4 Replies View RelatedI may have to run a Vista "repair/install" and I wonder how long this takes? Soon seems best before SP1 is released.
View 9 Replies View RelatedHaving found out I need to remove SP1 before I can do a repair install, is it possible to slipstream SP1 with the recovery CD to create a new one in case I need or to do a repair install in the future
View 7 Replies View RelatedAm running Vista 64 Business on XFX 680i Sli LT with 2Gb ram, Quad core 6600, 600GT video. System runs fine, but I want more memory to help performance. When I try to install additional 2Gb, I get a blue-screen every time I boot (some blue screens have an IRQL_NOT_LESS_THAN_OR_EQUAL, most have no error msg). Is there a way to determine if my installation of Vista already has this installed? I've already checked the Control Panel/Windows Update/Review Update History, it's not in there, I thought it may be in the core install on the DVD?
View 9 Replies View RelatedI am really frustrated. I installed SP2 on my 32 bit Vista Ultimate and it failed on stage 3 of 3 at 100% and rewound itself and rebooted. I then tried my 64 bit system and it installed fine. Tried my 32bit system again and it failed so bad I had to restore C from a backup. Even a recovery would not work. Then did searches as to why this may be happening and tried all the bits advised. Ran the SFC and it reported errors and said it fixed them, ran it again and it found no errors, did the rearm thing even though I did not use any betas and my version is activated, ran the SP2 readyness and it reports no errors, have no disk management software installed so that is not the issue but everytime after it gets to stage 3 of 3, 100% it sits there for ages spinning the disk and then fails and reverts the changes.
Have used the online update and also the standalone update and that reports an E_FAIL (0x80004005). The log file that is produced is huge and gives so much information you can't make head nor tail out of it. I am certainly not taking MS's option and doing a complete reinstall as then I would have to reinstall all of my software and bother heaps of companies for activations again.
I have a Toshiba A205 that came with Vista installed. I’ve obtained a set of XP Toshiba recovery disks for this computer which I want to install in a dual-boot arrangement. I know how to set up the dual-boot but I am afraid to run the XP recovery disk for fear it will over-write my Vista partition (C instead of installing to the D: partition I’ve set up. how to use a Toshiba recovery disc to install to an alternate partition?
View 5 Replies View RelatedThe tech at HP told me that I need to use the exact same hard drive (Fujitsu 120G) that came with the notebook originally to use the recovery disks to reinstall Vista. Is that true? I wanted to use a Western Digital 160G HD instead.
View 9 Replies View Relatedwell i have a laptop with win vista 32 bit already installed on one partition.i have totally three partitions.one with the OS,one with the recovery partition and one just for my files.all three are on the same hard drive.now i recently got win 7 64 bit and want to do a clean install.can i do it without losing all the data in the recovery and other partition???
View 5 Replies View RelatedI was given a HP Compaq 6820s by a good friend with a bad hard drive. He had not made recovery discs, and HP can't supply them. I can replace the hard drive no problem, but don't want to fork over the $$$ for a new Vista OS. I have XP pro, but there seems to be too many issues with downgrading. I have the COA on the bottom of the computer. Since the OS was definitely paid for with the original purchase, can I get an OS from MS for this computer?
View 5 Replies View RelatedI want to install backup and hard disc recovery software on my laptop and two PCs.I am impressed with Acronis True Image Home 2009 but this requires a seperate license for each machine.However, Active@Disk Image allows installation on 3 machines and is cheaper.The OP on the laptop is Vista Home Premium, and on the PCs XP Home SP3.What do people think of either choice?
View 6 Replies View RelatedI have hp laptop with Vista Home Premium (OEM) installed. I've made Recovery Disks using the Recover Manager. I wish to have a clean install of Vista instead of using the Recovery Disks. I've read previous threads but I have to say I am only getting more confused.
- Can I perform clean install of my Vista OEM?
- Can I use any copy of Vista OEM cd and use the Product Key sticked behind my laptop?.........
i recevd a sli macine and software. it was locked up so i formated and
reinstaled vista ultimate.
if i have windows cd in it will but but if i try to boot from HDD it says
"NTLDR is mising". what dose that mean?
--
HP Pavilion M9080N(GQ500AA)
Intel Core 2 Quad Q6600(2.4GHz)
64 bit Quad-Core Processor
3GB DDR2 667 (2 x 1GB & 2 x 512MB)
1000GB 7200RPM SATA (2 x 500GB)
SuperMulti DVD Burner with LightScribe Technology
DVD-ROM drive 16x max. speed
ATI Radeon HD 4850
Integrated High Definition audio
Integrated 10/100/1000Mbps network interface
Wireless LAN 802.11a/b/g/n
Windows Vista Ultimate 32-Bit SP2
Gateway HD2200: HD 22" Wide Screen LCD
I've video ASUS EN7950GX2 on ASUS P5WDG2-WS and have problem with VISTA... I haven't sim problem in Win XP Pr, Win XP Pr x64, Win 2003... In manual can see that video device comf with VISTA. But NOT!!Who did that sh..t VISTA? Why appear that probl and how to kill it?
View 4 Replies View Related