Why Keep Bootable Cd Or Dvd To Boot For System
Apr 23, 2009
I recently install new hdd 500gb seagate, i install windows vista home prem sp1 , when i try to boot the system IT FREEZED on booting on black screen and it shows all the hardware install when put any bootable cd and boot the system, system boots fine, i had same issue with old sansung 80gb hdd, i have to keep the bootable cd in optical drive to boot the system, i also tried reseat the cables from optical drive but did not work, my optical drive works fine after boot in windows
View 5 Replies
ADVERTISEMENT
Apr 12, 2008
I got vista given to me *_Leagly_* by a friend and have bought a serial. I want to make a copy of the disc incase the other one gets damaged. I just copied the files of the disc from the oringal disc from my dvd drive to another DVD-RW disc in another DVD-RW Drive. All the files are on there and when i run setup from an OS (like XP since i have vista and xp dual booting on my pc) it works fine. But when i try to boot from it it wont boot. I have set my DVD Drive to my 1st boot device and it will boot from the oringal alright but not the copied one. What am i doing wrong?
I currently dont have access to the oringal at this time but i have the files on the copied one. What do i have to do too the disc to make it bootable. i no this is vista 64 forums but mine is 32 bit. I dont want crapy posts from people saying anything about piracy and i tryied googleing it but without avale.
View 6 Replies
View Related
Jul 29, 2009
i am new to this forum but i have problem with my system bootup. my system takes too long to boot and it started 3days ago. it takes about 120secs at bootscreen alone. i believe it is not my start up programs as it takes about 3 secs to start up from login page. i donot use any third party bootscreen. normally, my system boots in 30 secs but now i am facing a lot of problem which i do not understand. i have tried all the tutorials in this forum relating to bootup problems but found no luck.
View 6 Replies
View Related
Mar 10, 2009
I'm using Vista Home Premium. I have a spare 250GB SATA drive, so I thought I'd install XP on that, then dual boot with my original Vista drive (AMD Athlon dual-core at 3 GHz, 4GB RAM, 64 bit Vista Home Premium...when it boots). The XP install seemed to go fine, in that the drive would boot up alone (with the Vista drive disabled). But when I plugged my main Vista drive in, the system would not boot up at all. I would get a Drive Read error. I don't get it. Both drives boot up fine by themselves, but when both are running, neither will boot. Do I need to set one drive's jumpers or something? I don't know SATA drive jumper settings, or if that's even the issue.
View 6 Replies
View Related
Jul 2, 2008
I am having some problems regarding booting up my Advent laptop, it came pre - installed with Vista home premium. it just wont boot up anymore all i can do is access the bios screen, the handbook it came with gives me information to press F8 to enter system recovery but sadly this does nothing, but make a beep each time i press the key. The laptop is just out of its 12 month guarantee so could be costly to repair. I wonder if any one can shed some light on what i can do to solve this problem.
View 4 Replies
View Related
Aug 15, 2009
I installed Vista Home Premium and got a nasty hard drive failure error. So I was going to boot from the install CD and get into the Recovery Options in order to run chkdsk on the drive. The system won't boot from CD. It actaully starts booting from the CD but after the loading files step it just boots into the installed Vista environment.
View 4 Replies
View Related
Feb 6, 2009
I have recently purchased Vista Business and it has been running OK for about a week with some assistance from Microsoft support. This morning I woke up and the system won't boot. I put the Vista disc into the PC and I get a page that comes up called "Install Windows" with 3 selections:Language to Install Time and currency format Keyboard or input method However my mouse and keyboard do not allow me to make the appropriate selectios or click the "next" button to continue.
View 3 Replies
View Related
May 22, 2008
I had a bootable DVD from a friend of Vista Ultimate upgrade or fresh install. I had Home Premium pre-installed. I upgraded to the Ultimate through "Upgrade" and it was successful. But I lent the DVD to a friend, and I have now realised I want to reinstall. I have a non-bootable exact copy of the bootable disc. I can start fresh install from inside Windows, but I am wondering if it will work.
View 5 Replies
View Related
Oct 8, 2008
i ask if someone may know of a way to create a bootable USB flash drive with a OEM Vista recovery CD. coz as you know now adays laptops have a recovery cd which is liable to be lost or scratched and the worse senario is when you had deleted the recovery partition. in that case your only hope is to order a new set of recovery cd from manufacturer which in my case didnt restore the recovery partition thats why i need to recover the system from an usb flash drive.
View 7 Replies
View Related
Apr 2, 2009
Iam trying to install XP-Proff on HP pavillion desk top , i formated the vista and tryed toinstall xp, system is not booting through the XP Boot able CD, i tried several times to do that, can any one helpme to how toinstall XP in HP pevillion desktop ,ifully formated the Vista verson,
View 5 Replies
View Related
Mar 26, 2008
I've searched the web extensively, though I came close, I still can't solve my problem: When I've installed vista, the installation have set the boot manager to be on a different disk than the the boot loader. Now, if I want to remove the hard drive containing the boot manager, the system won't load, which is reasonable given these conditions, nonetheless I DO want to remove this hard drive and still be able to boot, therefore I've searched and queried everywhere and done the following: Physically disconnected the hard drive with the boot manager on it (d and boot with the Vista DVD to run startup repair -> this didn't help, the startup repair found the operation system but didn't recognize any problem, when trying to boot the system would not load, the error I'm getting when booting is disk read error occurred press ctrl+alt+del to restart.
View 4 Replies
View Related
Nov 15, 2009
I am unable to boot anything on my system. I have a black screen error File: pciidex.sys. When I try to use my restore disk I get a blue screen error Ox0000C1F5. I can not get into any of the Safe modes I just get the black screen error. And I am not able to boot the recovery system using PF11. It seems the only thing I can access is BIOS. I am not worried about saving files at this point. I really just want to restore back to factory settings and avoid needing to spend the money on a new hard drive. Any advise on how to re install with the errors I am receiving?
View 4 Replies
View Related
Oct 6, 2009
I have 3 hard drives with assigned characters c, d, f (e drive is cd rom) each drive has only 1 partition. On c there is Vista 32-bit Ultimate, on d there is Vista 64-bit home premium. If I change location of paging file - e.g. Vista Ultimate paging on f, Home paging on c then that operating system does not boot correctly. The OS boot progress bar is displayed but system does not boot (I waited many minutes before reset).
View 4 Replies
View Related
May 13, 2009
Looking for any information on prefered method for installing XP and/or Vista *to* a USB (8 gig) memory stick. The stick is to be used for troubleshooting purposes (ie booting up and scanning inoperative systems).
View 9 Replies
View Related
Feb 13, 2010
the thread title says it all: I'm looking for a lightweight bootable command prompt which supports ntfs drives and supports x64 command line tools. Something like Freedos x64 or command.com x64 (if they existed which unfortunately they don't).
So far, all I can do is to boot into Windows' own command shell, but this is far from being lightweight. Every Linux supports booting into a pure command line mode, so there must be something similar for Windows with x64 support. Basically, the recovery console would suffice if it allowed using external command line tools, but afaik this is not the case.
View 9 Replies
View Related
May 7, 2008
I had a fire a few months back which burnt my Acer T180 case. I've managed to change the case and get all the parts working again except the DVD rom which was melted and beyond repair. As my whole house is wireless I'm not really bothered about getting a new DVD rom - my other PC controls the network and has a DVD writer inside. Once vista is installed the network will take care of everything.
My problem now is how do I reinstall Vista on a PC that has no DVD rom to read my Vista DVD. OK I could swap my DVD around for a few hours by its covered in warranty void stickers and as its new I don't want to risk anything. Is there anyway to convert a Bootable DVD into a Bootable USB drive? I've got a 4 Gig stick which should be fine. My motherboard also boots from USB. I've managed to make a copy of the vista DVD into ISO image but can't find a program that will put the ISO onto a USB drive.
View 9 Replies
View Related
Jun 2, 2009
I had a working Vista, but I had an issue with it and had to reinstall (because that is the solution to everything with windows). So I installed another Vista to another partition, but the problem is that the new Vista doesn't have the files required to boot because the older partition has. So how can I make my C: (new Vista) as bootable and delete D: (old Vista)?
View 8 Replies
View Related
Aug 21, 2008
I have this 2.0 gb thumb drive that was given to me. How can I tell if it's bootable or not. It does not have a brand name on it.
View 6 Replies
View Related
Jan 1, 2008
I'm looking for a backup program for Vista Home Premium that allows booting from DVD or CD-ROM in order to restore backups stored on DVD or CD-ROM.
View 5 Replies
View Related
May 25, 2008
My friend just bought an Acer computer with Vista SP1 on it. It came with no literature or CDs. Is there a way he can make a bootable CD with Vista Sp1 on it for emergencies?
View 6 Replies
View Related
Mar 26, 2008
I have a dual boot setup where I boot from the first HD and start XP/Vista. Vista is installed on a separate disk. I don't use XP at all and want to remove that disk, but then I need to make the Vista disk bootable. The Vista install is on a raid volume. I googled a little bit and found some information about bootrec and tried to boot from the DVD and tried /fixboot, but nothing happens. When I load the recovery console it doesn't display any Vista installations, so I wasn't very surprised that bootrec failed. I then proceeded to load the driver for the raid controller, but still no installations are displayed. Is there a simple way to make a disk bootable for Vista - on a raid volume?
View 4 Replies
View Related
Mar 26, 2008
I have dual boot and Vista is installed on drive D. I want to disconnect (remove) C drive and make D the only disk. How can I make it bootable? I do not have any programs installed yet.
View 4 Replies
View Related
Mar 23, 2008
I have dual boot and Vista is installed on drive D. I want to disconnect (remove) C drive and make D the only disk. How can I make it bootable? I do not have any programs installed yet.
View 4 Replies
View Related
Oct 1, 2009
I've got a problem with my p.c in the fact that it wont boot up. I think i have unintentionally downloaded a virus which more than likey would have caused this. I have Windows vista home basic 32 bit pre-installed on my p.c and it didn't come with any back up/recovery disks. Any solutions on how to get my p.c up and running?
View 9 Replies
View Related
Jan 19, 2009
Doing some partition work a few days ago, and somehow lost the boot for my main system. D was my main system, as you can see it holds a lot of applications and information, "C" is a fresh install. Question is can I get "D" to reboot, it doesn't show in msconfig/boot. I know I can transfer bit by bit, but its a long winded job, I feel there must be a way to repair reboot. Tried the system disc Repair mode, only shows system on "C". 2 hard discs, "C" and "F" on one drive "D"on the other.
View 4 Replies
View Related
Jun 30, 2008
I have an hp desktop that came with vista home premium preinstalled. It will not boot up now. So I tried the emrgency recovery disks that I was told to createwhen I first got the computer and they didn't work. I thought I would have to boot from windows vista disks to repair this. No Vista disks came with the computer. My question is can I buy the upgrade SP1 disk to both improve the system and resolve the boot problem or am I forced to get the Full system
View 8 Replies
View Related
Aug 8, 2008
Im looking for information regarding the best way to configure a dual boot system using Vista Ultimate and XpPro. What is the best way to set up the two 320gig 7200rpm HHD's? Should both hard drive areas be combined and then partitioned or would you recommend one operating system per drive? OS are Vistax64 and XpPro.
View 8 Replies
View Related
Apr 26, 2008
annoying pop up when the system tray is being loaded at boot up. This is the message. SiSTray has stopped working a problem has arisen .windows will close this program down and if the problem can be resolved windows will let you know. The computer works fine after this window is closed down.
View 7 Replies
View Related
Jul 8, 2008
I have (or had) Vista Business on my HP Pavilion dv2670br and I also installed opensolaris on it. I had read this article (Vista SP1 won't install on dual-boot systems: Microsoft) before installing the SP with the stand alone file downloaded from MS's website, but since I did not have Enterprise or Ultimate I didn't think I would have problems. Silly me.
Now I do not know if it is the grub loader itself or the fact that opensolaris uses ZFS. I tried going through the steps here: Recovering the Vista Bootloader from the DVD - NeoSmart Technologies Wiki, to no avail. I suspect I will have to go through a very destructive process, but thankfully I won't really lose much since it is a relatively new laptop with very little university work on it.
View 6 Replies
View Related
Jul 29, 2009
I downloaded a film ( a backup o one of my DVD's it has got scratched and I really wanted to see it as well. Anyway when I did I opened up the video file into windows media player, it asked me to get some rights/ acquisitions to play the file. As the message was coming from windows media player I guess hmm it must be true. Usually I wouldn't if anything asked me to download anything. As it finished windows media message came up with a message to say it was downloaded correctly. So I checked task manager making sure it was actually windows media player and it was. When I tried playing the file it wouldn't play.
Whatever it downloaded hadn't taken effect yet. Then I blue screened. My laptop wouldn't boot up normally. So I tried booting up with " last good configuration" it booted up but I found out what had happened. All my programmes were "corrupted" something to do with the registry according to the 60 pop up messages saying each and every programme had been corrupted.........
View 5 Replies
View Related
Mar 23, 2008
I bought a new laptop with Vista already installed on it. I want to install XP in a multi boot configuration but get stuck in Disk Management and am unable to proceed from there. I'd like to keep Vista on my laptop, but if it comes down to it I'll need to take it off and put on XP because our work computers run with XP and we do a lot of work on reports and presentations from home and network from home. I can't find the New Partition Wizard to make a space for XP.
View 6 Replies
View Related
