Doing some partition work a few days ago, and somehow lost the boot for my main system. D was my main system, as you can see it holds a lot of applications and information, "C" is a fresh install. Question is can I get "D" to reboot, it doesn't show in msconfig/boot. I know I can transfer bit by bit, but its a long winded job, I feel there must be a way to repair reboot. Tried the system disc Repair mode, only shows system on "C". 2 hard discs, "C" and "F" on one drive "D"on the other.
Yesterday morning Vista, wouldn't boot I was promped to use safe mode, last known good configuration etc. Would not start in safe mode or last known good configuration. I finally got the repair from CD to corme up ran repair after 30 minutes or so got message found 0 problems 0 fixed scrool down for details reasion repair failed couldn't find C drive. I later got into safe mode and opened Excel trying to save a work book. couldn't save anthing from safe mode Hard drive light is on. how to boot from C on hard drive?
I'm running a workstation w/ 6 hard drives. My 1st O/S on a separate HD is Win 2K. 3 yrs. later I added XP Pro on another HD. Last yr. I added Vista Ult. on a 3rd separate HD. All worked well & after the SCSI initialization I got to choose which of the 3 to use. Foolish me: I decided to load one of the 3 remaining HDs w/ XP Pro so I could use it exclusively for gaming. Now when I power up I still get THREE choices but instead of Win 2K, XP Pro, and Vista, I get XP Pro (new), XP Pro, Win 2K, but Vista is no longer displayed as a boot choice. Any idea what happened and how I can get it re-displayed?
i am new to this forum but i have problem with my system bootup. my system takes too long to boot and it started 3days ago. it takes about 120secs at bootscreen alone. i believe it is not my start up programs as it takes about 3 secs to start up from login page. i donot use any third party bootscreen. normally, my system boots in 30 secs but now i am facing a lot of problem which i do not understand. i have tried all the tutorials in this forum relating to bootup problems but found no luck.
When I first bought my computer with Vista I have some really bad issues with the Norton and Mcaffe antivirus. I then downloaded Trend Micro. Between these three programs I ended up having some drivers removed etc.(that's been corrected). It was a huge mess and between customer support and tech. help from Trend Micro and e-machine I ended up removing programs that I was told were incompatable and needed to. They also had me doing so many system restores I lost track of where I had originally started. I do know for sure that I removed about 5 programs that were incompatible with Vista and AVG free edition was one of them. I am now using Windows Live OneCare anti virus and it has been doing well but recently I received an update and now I am getting an error that Widows Live OneCare is incapatiable with the AVG Free Edition that was once on my computer but was removed before one of system restores.
The AVG shows up in my list of programs in the 'add and remove programs' in the control panel and can be seen listed in my program files but if I try to remove it ( and I have tried many times) an error occurs because it was removed a long time ago. I have several programs that are like this but don't know how to keep them from showing up in my add/remove or in my program files. I tried contacting the support and help people that I bought the computer from ( e-machine) and also contacted support from Trend Micro as it was mostly their program that messed me up to start with, but both help and support personnel only made things worse.
I finally had to stop asking them for help as the advise they were giving me was totally insane. I don't even think there was a human being answering my emails from the type of answers I was getting back.Is it possible to get these programs from showing up and totally removed from my computer? I know the AVG can't be conflicting with my Windows Live OneCare because it was removed by going to the Add/remove and removing it but I don't like looking down and seeing that my anti-virus keeps showing it is at risk. I am not that experienced with computers but I think I could follow directions if someone had some " not to awfully technical advice" :o)
I turned off System Restore ,then thought seeing as I have the HDD space I may as well use it.I switched System Restore back on and thought no more about it. Now I notice there are no restore points.It should set a restore point at boot up and before installing software? It does neither and I can't find an option to turn it on.
Sometimes, after installing MS updates or other apps, I lose my sound. The only way I get it back is to use System Restore to a point where the sound worked. However, then I don't have the updates or apps. This tells me that it's a software problem with Vista - not a hardware problem. Now, I am about 11 MS updates behind - and no sound. Also, the System Restore doesn't work anymore (I no longer have a Restore point where the sound worked). I've Googled and have found that many people have similar problems with their HP laptops. I am using Vista, SP-2. I am now going to ionstall the updates since I can't go back to get the sound. I've checked in Device Manager (no problem) and made sure I'm using the most recent signed driver. I can't find any text indication that I have a problem but when I go to Playback Options and try the sound Test, I get a message which says the sound didn't play. Hope I included all the relevant information. If not, please tell me. I've tried everything I know of. I have a full backup of my hard drive
my stepdaughter's laptop's hd crashed (unusable), she of course lost the system disc. I have my laptop and system disc, both laptops are gateway but different models 6752 and 6836. I have a new hd on order, and I will install vista with my disc and her windows product key (her laptop) I shouldn't have any problem with that right?
I just restored my computer to a previous date only to find that during the course of it, the action lost or deleted my belongings. All of my music, photos, and documents are all gone.
My daughter has forgotten her password for her laptop. She has Windows Vista.When you turn on her laptop it comes up asking for a password straight away, this is the one that she's forgotten.
I thought that I could make a reset password disc from a friends computer who has Vista, but this doesn't work.
It allows me to put in a new password and question hint, but when I click next it comes up with 'an error occured while wizard was attempting to set the password for this user account'. Is this because I've copied it from another computer?
I can change her password as I don't really want to do a system restore as she has all her homework and pictures on there and don't want her to loose it.
Using Vista 64 I want to completley reformat my harddrive and reinstall vista but it doesnt seem to want to let me delete everything it wants to backup some files and put them in a windows.old folder. I obtained a virus that cant be removed by any program (I've literaly tried everything spent days trying) I just want to reformat with no backups. I remember reformating reinstalling windows XP by using a dos command after bios like /reformat C: or something? How do I completely reformat my main drive in Vista?
The main hard drive on my pc that has the operating system on and everything is begining to fail and i need to sort it out before i cant use the disk anymore. The disk is in warrenty so i will be able to get it replaced but not all the things on it.
How can i backup my operating system and all of the programs and files on it, i have another hard drive that i can use as a backup but im not sure how to do it.
Vista Home Laptop... I have been trying to delete an account which was also admin but every time I do the internet will not connect on the main account that was created with the computer.
so here is my problem. I partitioned my c drive to make room for a test windows 7 install. well apparently my DVD burner hates me, so i never got the chance to try it out. The partition is 30GB. Now it says free space. but i cant extend my main partition back to it was. It says it's an extended partition. Do i have to make it primary to extend the c drive? And if so, how would i go about that? It also asked me, when not a drive, if i wanted to delete the partition... Would that make it primary? It says the partition will become inaccesible if you delete it...
I'm having a problem with Vista business that's driving me crazy. At work I have Vista business on a main machine (called MAIN). It's a Dell Vostro and it came pre-installed with Vista Business, 4 GB RAM, 200 GB hard drive. I have patient management and imaging software on it and I have up to 7 computers that connect to MAIN to access this software. I have all the sharing and security settings for "Everyone" and I can connect with all seven computers most of the time. But everyday, one or two of the workstation computers (running Vista basic), will be kicked off and I get an error message when I try to reconnect to MAIN "No more connections can be made at this remote computer at this time because there are already as many connections as this computer can accept."
So I can't access the software on MAIN, I can't print to the printer on MAIN, I can't do anything until I reboot MAIN. Then everything can connect again. This happens randomly and I know the maximum connections is 10 computers, so why am I having this problem with 7? Connection to the router is fine and I have internet connections on all seven. 2 of the seven are wired to the router and the other 5 are wireless connections.
I have an inspiron 1545 with a hd 4330 with 256 mb gddr3 VRAM. I tried to extract the bios but GPU-Z said bios reading not supported i heard somewhere that pc manufacturers cuts of the read/write pins of the GPU Some gu ys told me that in some laptops the Video BIOS is a part of the main bios. If it is true what if I extract the video bios from my main bios setup file & after changing the clock speed reflash the main bios. By the way my bios version is A14
I'm using Vista Home Premium. I have a spare 250GB SATA drive, so I thought I'd install XP on that, then dual boot with my original Vista drive (AMD Athlon dual-core at 3 GHz, 4GB RAM, 64 bit Vista Home Premium...when it boots). The XP install seemed to go fine, in that the drive would boot up alone (with the Vista drive disabled). But when I plugged my main Vista drive in, the system would not boot up at all. I would get a Drive Read error. I don't get it. Both drives boot up fine by themselves, but when both are running, neither will boot. Do I need to set one drive's jumpers or something? I don't know SATA drive jumper settings, or if that's even the issue.
I am having some problems regarding booting up my Advent laptop, it came pre - installed with Vista home premium. it just wont boot up anymore all i can do is access the bios screen, the handbook it came with gives me information to press F8 to enter system recovery but sadly this does nothing, but make a beep each time i press the key. The laptop is just out of its 12 month guarantee so could be costly to repair. I wonder if any one can shed some light on what i can do to solve this problem.
I installed Vista Home Premium and got a nasty hard drive failure error. So I was going to boot from the install CD and get into the Recovery Options in order to run chkdsk on the drive. The system won't boot from CD. It actaully starts booting from the CD but after the loading files step it just boots into the installed Vista environment.
I have recently purchased Vista Business and it has been running OK for about a week with some assistance from Microsoft support. This morning I woke up and the system won't boot. I put the Vista disc into the PC and I get a page that comes up called "Install Windows" with 3 selections:Language to Install Time and currency format Keyboard or input method However my mouse and keyboard do not allow me to make the appropriate selectios or click the "next" button to continue.
Iam trying to install XP-Proff on HP pavillion desk top , i formated the vista and tryed toinstall xp, system is not booting through the XP Boot able CD, i tried several times to do that, can any one helpme to how toinstall XP in HP pevillion desktop ,ifully formated the Vista verson,
I recently install new hdd 500gb seagate, i install windows vista home prem sp1 , when i try to boot the system IT FREEZED on booting on black screen and it shows all the hardware install when put any bootable cd and boot the system, system boots fine, i had same issue with old sansung 80gb hdd, i have to keep the bootable cd in optical drive to boot the system, i also tried reseat the cables from optical drive but did not work, my optical drive works fine after boot in windows
I've searched the web extensively, though I came close, I still can't solve my problem: When I've installed vista, the installation have set the boot manager to be on a different disk than the the boot loader. Now, if I want to remove the hard drive containing the boot manager, the system won't load, which is reasonable given these conditions, nonetheless I DO want to remove this hard drive and still be able to boot, therefore I've searched and queried everywhere and done the following: Physically disconnected the hard drive with the boot manager on it (d and boot with the Vista DVD to run startup repair -> this didn't help, the startup repair found the operation system but didn't recognize any problem, when trying to boot the system would not load, the error I'm getting when booting is disk read error occurred press ctrl+alt+del to restart.
I am unable to boot anything on my system. I have a black screen error File: pciidex.sys. When I try to use my restore disk I get a blue screen error Ox0000C1F5. I can not get into any of the Safe modes I just get the black screen error. And I am not able to boot the recovery system using PF11. It seems the only thing I can access is BIOS. I am not worried about saving files at this point. I really just want to restore back to factory settings and avoid needing to spend the money on a new hard drive. Any advise on how to re install with the errors I am receiving?
I have 3 hard drives with assigned characters c, d, f (e drive is cd rom) each drive has only 1 partition. On c there is Vista 32-bit Ultimate, on d there is Vista 64-bit home premium. If I change location of paging file - e.g. Vista Ultimate paging on f, Home paging on c then that operating system does not boot correctly. The OS boot progress bar is displayed but system does not boot (I waited many minutes before reset).
I've got a problem with my p.c in the fact that it wont boot up. I think i have unintentionally downloaded a virus which more than likey would have caused this. I have Windows vista home basic 32 bit pre-installed on my p.c and it didn't come with any back up/recovery disks. Any solutions on how to get my p.c up and running?
I have an hp desktop that came with vista home premium preinstalled. It will not boot up now. So I tried the emrgency recovery disks that I was told to createwhen I first got the computer and they didn't work. I thought I would have to boot from windows vista disks to repair this. No Vista disks came with the computer. My question is can I buy the upgrade SP1 disk to both improve the system and resolve the boot problem or am I forced to get the Full system
Im looking for information regarding the best way to configure a dual boot system using Vista Ultimate and XpPro. What is the best way to set up the two 320gig 7200rpm HHD's? Should both hard drive areas be combined and then partitioned or would you recommend one operating system per drive? OS are Vistax64 and XpPro.
annoying pop up when the system tray is being loaded at boot up. This is the message. SiSTray has stopped working a problem has arisen .windows will close this program down and if the problem can be resolved windows will let you know. The computer works fine after this window is closed down.
