I bought a new laptop with Vista already installed on it. I want to install XP in a multi boot configuration but get stuck in Disk Management and am unable to proceed from there. I'd like to keep Vista on my laptop, but if it comes down to it I'll need to take it off and put on XP because our work computers run with XP and we do a lot of work on reports and presentations from home and network from home. I can't find the New Partition Wizard to make a space for XP.
I bought a new laptop with Vista already installed on it. I want to install XP in a multi boot configuration but get stuck in Disk Management and am unable to proceed from there. I'd like to keep Vista on my laptop, but if it comes down to it I'll need to take it off and put on XP because our work computers run with XP and we do a lot of work on reports and presentations from home and network from home. I can't find the New Partition Wizard to make a space for XP.
I partitioned a new hard drive and formatted it using my Windows XP Home Ed. SP2 Install CD. I then installed Win XP. I then installed Windows Vista Home Premium 64 bit on the other partition. ( I have two partitions on a single drive, C: and D This has been working great for me for the last 5 months. Today I have a reason to perform a repair install on just the Windows XP partition. I have performed a Win XP repair install successfully in the past using the XP SP2 install CD but never when my system was set up as dual boot. If I perform a repair install using my WinXP install disk to repair the Windows XP installation, will this leave my Vista partition untouched? Will it at all interfere with the system's ability to multi boot? I'm not very concerned about not being able to boot up into Windows XP but it's extremely critical that my system's ability to boot up into Vista is not compromised.
MY HDD lists the order of my partitions as D:, C:, and E:. I have Vista 64 set up on C: and 32-bit on E: to experiment with each. D: is a recovery partition. I'm thinking of removing the data from E: and deleting it and then "Stretching" C: back to it's original size. Best way to do this?
Has anybody installed Vista twice in separate disk partitions on the same PC? I've been successfully running multi-boot with 2 XPs and a Vista on 1 PC. There's plenty info about on how to do that. Now I'm going to separate all XP installs onto 1 PC, and all Vista installs onto another PC. Will this make life easier? So I'll be running Vista Home Premium twice on 1 PC. One install will be for production use, and the other for testing. I've not seen any info on doing this.
I had successfully installed win xp pro on my pre-installed vista home computer.
When I used to boot up, I had the option of selecting one of those 2 OS. I begun having problems with xp pro so I "repaired" it using my xp pro cd. Now, I can't boot into either OS. Please help. I have tinkered with the MBR, FIXMBR, FIXBOOt commands but can't get anything to work. All I get when I boot up is the selection of Keyboards, language and then I get a menu of options such as Repair startup, Memory diagnostics, Recovery (to factory settings) etc., I don't have vista dvd since it came pre-installed on my computer.
I do have xp but am afraid of re-installing xp pro since I have documents on borh drives (each drive contains its own operating system).
For example, my c drive contains vista, (d is recovery on the same hard drive) and xp pro is on a separate physical drive.
I can see that both drives have windows on them but I am unable to boot. I have managed to get vistaboot pro but can't seem to run it.
I have Vista Home Premium 64-bit and Windows 7 installed and use the standard Microsoft boot manager from Windows 7 to dual boot. Each operating system is in the first primary partition of a hard drive. No problems. However, I think I need reinstall WinXP so that I can view some old AVI files that use the Intel IV50 codec. For some reason Vista does not like the AVI files and best I can tell the codec add-in only works under WinXP Media Player. What is the best way/program that will allow me to boot either Vista, Windows 7 or Windows XP OR is there a magic bullet to view and convert the old AVI files. I have tried Format Factory and come up empty. No matter what I try the audio works but the video is not available.
I recently got a new Vista machine - not because of a desire, but because of it becoming necessary. Anyhow, I have taken the steps to establish a network and have assured that the same network ID is on all computers. The several operating systems include Windows 98, XP Home Edition, and Vista Home Premium. The Vista Machine is set to private network status, set to share files and folders, set to share printers, set with Password Protection turned off, and set with Neetwork Discovery turned on. I have also gone to the folders that I have set to share on the computer (the C drive, among others) and have made sure to set the permissions so that "Everyone" has full access and control.
Lastly, I have set-up the system to disable User Account Control. Per Microsoft, everyone who has a computer associated with the network should be able to freely acces, read, and write to the files, printers, etc. that I have shared on this computer, right? On the network maps on all computers, all computers are visible. Furthermore, once a computer on the network is selected, the shared items are usually visible. But, for some reason, no computer can access the shared materials on the vista machine even though from the vista machine, I can access all shared materials on the other computers. When the shared materials on the Vista Machine are attempted to be accessed, a "Access Denied" Error/Alert is displayed. I have restarted all computer AND the router to no success.
Messenger Group, developed with Windows Live Messenger platform, is a service for a group of Messenger users chatting together in real time. Maybe you think that Windows Live Messenger supports multi-conversation, but this multi-conversation is temporary, will be dismissed with the finish of conversation.
Compared with multi-conversation, Messenger Group is an existing group with each member in, members can talk together at any time without creating a temporary multi-conversation. Messenger Group makes a group of people connecting closer, no matter whether they are on your Messenger contact list. You can create a group for a team, a department or a company to chat online together. Now if you have a Windows Live ID, then go to Messenger Group website
Free to create Messenger Groups Each Messenger Group can have 900 members at most Group manager can change group name and display picture Group manager can set an administrator to help manage group Group member can change their nickname in the group
i am new to this forum but i have problem with my system bootup. my system takes too long to boot and it started 3days ago. it takes about 120secs at bootscreen alone. i believe it is not my start up programs as it takes about 3 secs to start up from login page. i donot use any third party bootscreen. normally, my system boots in 30 secs but now i am facing a lot of problem which i do not understand. i have tried all the tutorials in this forum relating to bootup problems but found no luck.
I have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD Status: 0xc000000f Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
I'm using Vista Home Premium. I have a spare 250GB SATA drive, so I thought I'd install XP on that, then dual boot with my original Vista drive (AMD Athlon dual-core at 3 GHz, 4GB RAM, 64 bit Vista Home Premium...when it boots). The XP install seemed to go fine, in that the drive would boot up alone (with the Vista drive disabled). But when I plugged my main Vista drive in, the system would not boot up at all. I would get a Drive Read error. I don't get it. Both drives boot up fine by themselves, but when both are running, neither will boot. Do I need to set one drive's jumpers or something? I don't know SATA drive jumper settings, or if that's even the issue.
I am having some problems regarding booting up my Advent laptop, it came pre - installed with Vista home premium. it just wont boot up anymore all i can do is access the bios screen, the handbook it came with gives me information to press F8 to enter system recovery but sadly this does nothing, but make a beep each time i press the key. The laptop is just out of its 12 month guarantee so could be costly to repair. I wonder if any one can shed some light on what i can do to solve this problem.
I installed Vista Home Premium and got a nasty hard drive failure error. So I was going to boot from the install CD and get into the Recovery Options in order to run chkdsk on the drive. The system won't boot from CD. It actaully starts booting from the CD but after the loading files step it just boots into the installed Vista environment.
I have recently purchased Vista Business and it has been running OK for about a week with some assistance from Microsoft support. This morning I woke up and the system won't boot. I put the Vista disc into the PC and I get a page that comes up called "Install Windows" with 3 selections:Language to Install Time and currency format Keyboard or input method However my mouse and keyboard do not allow me to make the appropriate selectios or click the "next" button to continue.
Iam trying to install XP-Proff on HP pavillion desk top , i formated the vista and tryed toinstall xp, system is not booting through the XP Boot able CD, i tried several times to do that, can any one helpme to how toinstall XP in HP pevillion desktop ,ifully formated the Vista verson,
I recently install new hdd 500gb seagate, i install windows vista home prem sp1 , when i try to boot the system IT FREEZED on booting on black screen and it shows all the hardware install when put any bootable cd and boot the system, system boots fine, i had same issue with old sansung 80gb hdd, i have to keep the bootable cd in optical drive to boot the system, i also tried reseat the cables from optical drive but did not work, my optical drive works fine after boot in windows
I've searched the web extensively, though I came close, I still can't solve my problem: When I've installed vista, the installation have set the boot manager to be on a different disk than the the boot loader. Now, if I want to remove the hard drive containing the boot manager, the system won't load, which is reasonable given these conditions, nonetheless I DO want to remove this hard drive and still be able to boot, therefore I've searched and queried everywhere and done the following: Physically disconnected the hard drive with the boot manager on it (d and boot with the Vista DVD to run startup repair -> this didn't help, the startup repair found the operation system but didn't recognize any problem, when trying to boot the system would not load, the error I'm getting when booting is disk read error occurred press ctrl+alt+del to restart.
I am unable to boot anything on my system. I have a black screen error File: pciidex.sys. When I try to use my restore disk I get a blue screen error Ox0000C1F5. I can not get into any of the Safe modes I just get the black screen error. And I am not able to boot the recovery system using PF11. It seems the only thing I can access is BIOS. I am not worried about saving files at this point. I really just want to restore back to factory settings and avoid needing to spend the money on a new hard drive. Any advise on how to re install with the errors I am receiving?
I have 3 hard drives with assigned characters c, d, f (e drive is cd rom) each drive has only 1 partition. On c there is Vista 32-bit Ultimate, on d there is Vista 64-bit home premium. If I change location of paging file - e.g. Vista Ultimate paging on f, Home paging on c then that operating system does not boot correctly. The OS boot progress bar is displayed but system does not boot (I waited many minutes before reset).
I've got a problem with my p.c in the fact that it wont boot up. I think i have unintentionally downloaded a virus which more than likey would have caused this. I have Windows vista home basic 32 bit pre-installed on my p.c and it didn't come with any back up/recovery disks. Any solutions on how to get my p.c up and running?
Doing some partition work a few days ago, and somehow lost the boot for my main system. D was my main system, as you can see it holds a lot of applications and information, "C" is a fresh install. Question is can I get "D" to reboot, it doesn't show in msconfig/boot. I know I can transfer bit by bit, but its a long winded job, I feel there must be a way to repair reboot. Tried the system disc Repair mode, only shows system on "C". 2 hard discs, "C" and "F" on one drive "D"on the other.
I have an hp desktop that came with vista home premium preinstalled. It will not boot up now. So I tried the emrgency recovery disks that I was told to createwhen I first got the computer and they didn't work. I thought I would have to boot from windows vista disks to repair this. No Vista disks came with the computer. My question is can I buy the upgrade SP1 disk to both improve the system and resolve the boot problem or am I forced to get the Full system
Im looking for information regarding the best way to configure a dual boot system using Vista Ultimate and XpPro. What is the best way to set up the two 320gig 7200rpm HHD's? Should both hard drive areas be combined and then partitioned or would you recommend one operating system per drive? OS are Vistax64 and XpPro.
annoying pop up when the system tray is being loaded at boot up. This is the message. SiSTray has stopped working a problem has arisen .windows will close this program down and if the problem can be resolved windows will let you know. The computer works fine after this window is closed down.
I have (or had) Vista Business on my HP Pavilion dv2670br and I also installed opensolaris on it. I had read this article (Vista SP1 won't install on dual-boot systems: Microsoft) before installing the SP with the stand alone file downloaded from MS's website, but since I did not have Enterprise or Ultimate I didn't think I would have problems. Silly me.
Now I do not know if it is the grub loader itself or the fact that opensolaris uses ZFS. I tried going through the steps here: Recovering the Vista Bootloader from the DVD - NeoSmart Technologies Wiki, to no avail. I suspect I will have to go through a very destructive process, but thankfully I won't really lose much since it is a relatively new laptop with very little university work on it.
I downloaded a film ( a backup o one of my DVD's it has got scratched and I really wanted to see it as well. Anyway when I did I opened up the video file into windows media player, it asked me to get some rights/ acquisitions to play the file. As the message was coming from windows media player I guess hmm it must be true. Usually I wouldn't if anything asked me to download anything. As it finished windows media message came up with a message to say it was downloaded correctly. So I checked task manager making sure it was actually windows media player and it was. When I tried playing the file it wouldn't play.
Whatever it downloaded hadn't taken effect yet. Then I blue screened. My laptop wouldn't boot up normally. So I tried booting up with " last good configuration" it booted up but I found out what had happened. All my programmes were "corrupted" something to do with the registry according to the 60 pop up messages saying each and every programme had been corrupted.........
I have a laptop with a 320 gig hard drive divided into 4 partitions. I am dual booting Xp Professional and Vista Business 32 bit Edition. I plan on upgrading to Ultimate as soon as Microsoft ships it to me. I have 2 partitons for XP, 1 for vista, and 1 as a shared partition that has mydocuments and email settings so that both systems can access them. If I use Complete PC Backup and select all partitions will this backup everything ot a 500 gig external, including the boot records so that if I do oa complete pc restore it will restore it so that my boot menu is restoreed in the event of a hd failure? Also, when I get vista ultimate, I plan on using Bit Locker to encrypt my Vista partition. Will that affect the complete pc backup of that partition or any of the others?
I was reading the speed up boot time performance tutorial (by a now banned member, no less) and saw that it had an option to improve disk speed by enabling advanced performance for the disk. Is it wise to do this on an installed hard drive? I noticed the optimize disk option was already enabled on my C drive and was wondering if it would be a good idea to enable the advance performance option as well.I just don't want to lose information if I am forced to, say, hard boot the system when if it freezes up.
I have a dual boot system: XP PRO on drive C and Vista Home Premium on drive B. I want to replace my hardrive, and move (or clone) Vista to new drive and be it C drive. Vista is still virgin and not other programs are installed, so changing it location from D to C drive will not influance any applications. I know how to create hard drive image. My question is how to make that new c drive with Vista on it bootable again.
