Windows Activation Couldn't Boot
Apr 24, 2008
I had to replace my motherboard because of a power surge (I've now bought protection - better late than never!) and when I tried to boot up my computer I got a message saying that Vista couldn't boot but it would try and repair the installation. In the event it couldn't and it asked for the installation disc. Vista installed OK but it would no longer accept the Product Key saying that my disc was for an upgrade (correct) and not for a clean installation. ObviouI now appear to have two expensive choices:
1 To buy a new key
or
2 To ask for Windows technical support which I have to pay for
View 9 Replies
ADVERTISEMENT
Mar 23, 2008
When Vista had a problem and I couldn't boot, I had to backup my mail by copying the entire folder from the hidden AppDataLocalMicrosoft folder. Then I had to reinstall Vista, and I copied the Windows Mail folder to the same location on the new install. Windows Mail works fine except when I click Send/Receive or press Ctrl+M. The Task/Errors screen pops up, and it says "Some errors occurred while processing the requested tasks. Plese review the list of errors below for more details" ONly there are no errors listed in the errors window, it's blank. I can Receive All, or Send All, and the program sends and receives on startup as usual.
View 6 Replies
View Related
May 5, 2009
I had windows XP pro and i bought windows vista home premium upgrade, when i went to install it it said that i couldn't upgrade it. So i followed directions on how to do a custom clean install, where you install vista without typing in the product key and without getting updates then you pick what OS you have and do the custom installation, then you install again (2nd time) and choose upgrade instead of custom and go through the process again.
The problem is after installing it the first time, I couldn't connect to the internet, so I couldn't install it a second time. I have an ASUS PQ5 PRo motherboard and when i start up there is this thing called express gate, in express gate I can use the internet but not when i enter Vista. When I put in the PQ5 Pro DVD vista says it can't open it. Also my XP PRO may have been 64bit, and now I am on Vista32 bit and the disck wont work.
I think the internet is a driver problem, if i go to the asus website on a diff computer and get the ASUS drivers put them on a USB and then open them on vista should this work? WHat drivers do I need? Just the LAN one? Also if the Asus DVD wouldnt start up will that mean that I wont be able to open the drivers on the flash drive too?
View 9 Replies
View Related
Mar 26, 2008
My laptop came with Vista Home Premium installed. I downloaded a Flash-BIOS update as per advice of my HP Care Centre. After it was done installing my laptop shut off (as I was told it would do). When I turned it back on, I was prompted to enter a Product Activation Key. I entered the Windows Product Key as shown on the sticker on the base of the laptop. The message I received was "The Windows Vista Home Premium product key you typed is invalid for activation" For the record, YES, I am entering the code in properly.
View 8 Replies
View Related
Jun 7, 2008
I still couldnt receive any windows update on SP1. After reading thru the thread why there is no SP1 available, I suspect it is the Sigma Tel Audio in my lappy that is not compliment. So I am thinking where can I install the latest driver for this hardware, tried doing it thru device manager but it stated that I have the latest software...
View 4 Replies
View Related
May 7, 2008
Just took delivery of my whizzy new PC running Vista Home Premuim (x64).
I'd stuck with my Pentium4 on XP Pro. Well, actually did not have much choice as the old beast died a death. Mobo trashed! I got the message from M$ that HotMail would no longer be supported on Outlook, and have been trying to install Live Mail. I keep getting the error "Sorry, we couldn't install these programs". How helpful is THAT! I finally tracked down a standalone install kit for WLM and now have messenger installed and (eventually) working.
View 9 Replies
View Related
Aug 15, 2009
I couldn't find a newsgroup that was English Windows updates, so since most updates involve security issues I guess I will vent here. This is the second time in about two months that my Vista Home Premium 32 bit desktop computer has been stuck in Update hell. It was perfectly fine all day yesterday and then when I started it this morning, it went to the green and blue screen "Configuring Updates State 3 of 3 0% complete Do not turn off your computer" and then it restarts, only to return to that exact same screen.
After watching it do that at least six times I finally turned it off. It took me about 14 more tries to get to start in a "safe" or "repair" mode which it is in now, still being "repaired." That was two hours ago. When this happened last time it was at the exact same point with the 3 of 3 screen. It seems that the only solution to this would be to turn off automatice updates and check for them and install them when my computer is not coming out of a cold start. Has anyone else had this problem and does anyone have a better solution to avoid this than turning off automatice updates?
View 8 Replies
View Related
Mar 23, 2008
i have just bought a machine from a friend and with it was given windows vista 64 bit. Being paranoid I did a full format and installed everything from scratch using the vista disk and product key supplied.I have the original hologram disk and case and the sticker which i have placed onto my computer case as directed however when i try to activate via
the net i am told that the product is already registered and i need to purchase another licence the software is only installed on one machine what do i need to do.
View 9 Replies
View Related
May 6, 2008
I am not sure if I have been scammed by the seller of my computer or if I have some other issues that are causing my validation to be required. In one place it says that I may be a victim of software counterfeiting. When I chose to go online and resolve it will not validate. In the other place it says to activate windows now. I purchased the computer in November 2007 and haven't had any problems until this month. Is it a coincedence that it has been 6 months? Today is my last day to activate and would like to know the best steps to take to resolve this issue.
View 9 Replies
View Related
May 29, 2008
When I try to activate my newly installed Windows Vista Enterprise an error message appears saying: DNS-naam bestaat niet. (in English DNS-name doesn't exist). So I'm unable to activate my Windows Vista. This may result in problems within 3 days.
My vista license is a MS-KISS license.
View 9 Replies
View Related
Mar 23, 2008
I have a new Vista home premium (fullversion) but when i install for the first time it say that my vista license is already in use? i have purchase it for many month ago,but not install it before now,somebody have likely stolen the key!? is there anything i can do??can microsoft somehow delete my Windows Vista activation (or my Product key?) can i somehowe prove that i own a fullversion?? some other number maybe on the box?
View 9 Replies
View Related
Mar 26, 2008
I have a new Vista home premium (fullversion) but when i install for the first time it say that my vista license is already in use? i have purchase it for many month ago,but not install it before now,somebody have likely stolen the key!? is there anything i can do??can microsoft somehow delete my Windows Vista activation (or my Product key?) can i somehowe prove that i own a fullversion?
View 9 Replies
View Related
Mar 23, 2008
just been looking at the windows activation page on my new PC, Where it says product ID: it has a list of numbers in this order= 5 numbers - 3 numbers - 7 numbers - 5 numbers Non of these numbers match what is on the sticker on the back of the machine! On that sticker it's a mix of numbers and letters. Do I just click continue with the line of numbers which is already there, or do I insert the number and letter combination which is on my sticker?
I posted this in another forum and one person said the id that is already there and the key on the sticker should be different! The other person said delete the numbers and put the letter and numbers from the sticker in there!
View 9 Replies
View Related
Apr 18, 2008
I'm Khairil Anuar from ITServices Sdn Bhd, Kuala Lumpur, Malaysia, one of the participant of Heroes Launch 2008 in Kuala Lumpur. I have some questions that need clarification regarding the Windows Vista Ultimate DVD.
1. I had received the DVD, registered and received the product key.
2. I had chosen "5000 or more" machines for the DVD when first registered.
3. I had no problem installing WVU on the first 2 machines. However, on the 3rd and 4th machines, I received an error message when trying to activate WVU. I was informed that the product key has already been used by other machines and I was asked to buy another product key?
View 7 Replies
View Related
Oct 8, 2009
I have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
View 9 Replies
View Related
Mar 23, 2008
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies
View Related
Mar 23, 2008
*My laptop came with Vista Home Premium installed.* I downloaded a Flash-BIOS update as per advice of my HP Care Centre. After it was done installing my laptop shut off (as I was told it would do). When I turned it back on, I was prompted to enter a Product Activation Key. I entered the Windows Product Key as shown on the sticker on the base of the laptop. The message I received was "The Windows Vista Home Premium product key you typed is invalid for activation" For the record, YES, I am entering the code in properly.
View 8 Replies
View Related
Feb 6, 2009
I have a HP pavilion laptop which came with 64 bit vista ultimate pre-installed. I shrinked the OS partition (160 GB), created new partition (40 GB) for 64 bit windows 7 ultimate. After installation of Windows 7, I cannot see the vista ultimate boot option when I boot my PC. When I boot into Windows 7, I still can see the vista partition. But instead of C: it is now displayed as E: I used the HP Recovery Disc to repair windows vista but I can only see a blank blue screen with the mouse pointer. How can I recover the vista?
View 9 Replies
View Related
Nov 24, 2008
"Where" into what folder do i load a new game.? my computer loaded a game into a folder that cant be accessed.. this could be the source of many of my game problems how do i set them up to all be in the same place and have them all work .. i couldn't find it in C:/ i only found it by clicking 'Custom Download" during reinstall it showed up in a folder listed there, and i was able to track it down. it is not listed in "Un-Install Programs and Features" .. can i delete it from there, and download it somewhere else.. like the Windows Game list... which would be really handy.. how do i do that.??? sorry to be such an annoyance, i built a computer to play games and ..it seems to need tweek'n to play them......
View 4 Replies
View Related
Nov 11, 2008
I've tried everything I used to do with Windows XP to get my iMac talking with this ThinkPad with Vista Home basic (and the other direction) but nothing is working - except me spending way too much time searching this out all over. my iMac has OS X 10.4.11 and I've been all over the Sharing folder in System preferences.
on the Thinkpad SL400 with Vista Home Basic, solutions I DID find I just couldn't access: some Security Options just not available in the Admin section. I just want to be able to grab files from one to another instead of emailing them to myself.
I have both on my desk w ethernet connections; and we also have a linksys wireless for my laptop when I leave my office. I thought before I call some local computer service I would ask, can anyone here advise a link or a fix
View 6 Replies
View Related
May 15, 2010
Using SimpleOCR I scanned text. I wanted to email it and save it to Documents. The SimpleOCR scan had no provision to send it, so I saved it to Desktop, and it saved in Open Office (I have MS Works and Open Office but I don't know why it saved to Open Office since I usually Works for word processing). The saved scan I rightclicked Copy. When I tried to Paste in Hotmail email, I clicked the dark Paste but it did not paste. When I copied and tried to paste the scan to a Works word processing page, the Paste option was grey and I couldn't paste it there either. How can I copy and paste a Simple OCR scan?
View 4 Replies
View Related
Feb 26, 2010
I am helping somebody fix their PC (Vista Home Premium on a Gateway laptop) via Windows Remote Assistance. The first time that we used it (after some success), after a planned restart, I couldn't reconnect and the remote user's keyboard would result in gibberish (e.g. type one letter, get something totally different on the screen). We needed to rebuild the PC anyway, so this just prompted us to finally get around to doing this. After reinstalling the O/S, we used WMA successfully and without incident to install many applications such as anti-virus, Adobe Reader, etc. Then, we had to reconnect after a planned restart. This time, I had the remote user invite me by saving the invitation as a file and sending it to me. We had been previously doing the invitations directly by email (without the file). Instantly after creating this file, the keyboard gibberish reappeared. I have no idea how to fix this. In both failure events, I tried System Restore points to times prior to the error, but this did nothing. I have looked at the keyboard layout and the language options, but they are fine and do not appear to be part of the problem. I have seen a couple of references to this on the web, but no good solutions offered. I am using Windows 7 Home Premium.
View 4 Replies
View Related
Apr 1, 2009
I was trying to open a .rar file, and found I need a new winzip, but I couldn't install it as something was wrong in it chest. I was told to do a remove in uninstall, but it's not listed, there was something else too, but I forgot, as my short term mem is AFU, please help if you Grok.
View 4 Replies
View Related
Apr 19, 2009
I loaded Vista x64 on my machine as an upgrade. Had everything loaded perfectly, etc... I tried installing Windows 7 Beta. After it was installed I realized that not only are there not enough drivers available, but I stalled it on top of vista instead of it's own partition (colossal screw up). I also realized I couldn't rollback the installation. I didn't feel like re-installing XP and vista wasn't letting me reinstall. So I came up with the brilliant idea of installing it clean without any key code. Now how do I activate this or reinstall vista and keep all my programs, files, etc... (ie. not spend countless hours reinstalling everything I have)?
View 9 Replies
View Related
Mar 14, 2009
I downloaded: "Realtek-Network-Realtek RTL8168B8111B family PCI-E Gigabyte Ethernet NIC (NDIS 6.0)" And my IE7 couldn't open any internet pages. Had to Restore to a previous point to get internet navigation again.
View 9 Replies
View Related
Aug 20, 2008
it all started after i downloaded a file and started to install it. first thing that happened was i got an error message saying g.exe couldn't be opened. so i closed it and thought it was funky for it to happen at the time. i also didn;t think it was a file of importance and we all know how windows is. so i figured a restart n i would be ok. i restarted and i got a rundll error C:/windows/system32/ " the specified module could not be found" ( opnnnoMd.dll ) i did find the file after some searching in the syswow64 folder. and it had been modified around the same time i had the error of g.exe...so i did some searching bout g.exe and found it could be a virus.... i have norton ran an update and scan...found nothing
View 9 Replies
View Related
Mar 23, 2008
I put my son's standard account under Parental Control on Vista Home Premium, he couldn't start a local server or access an Internet one. I think, from searching around, I could make his account an administrator account to get around this, but I'm not toon keen ongiving the kid thast much power. Does anyone know how to tel Parental Controls that Halo and Halo2 are allowed to create/access servers?
View 4 Replies
View Related
Nov 29, 2009
Ok so i have blocked these sites through this:notepad c:WINDOWSsystem32driversetchosts. and then I think I put a block on top of that so it couldn't be changed but I can't remember. If you think you can help me get the sites back unblocked that would be great.
View 9 Replies
View Related
Jun 30, 2008
When I turn my PC on in the morning it takes about 15 minutes to hook up to the internet and then it is just fine all day. My ISP says it is my PC and HP says my PC is fine. I have ran the Identify and Fix Network problems. It says it can't fix and it might be several net work adapters. A couple times it said it couldn't find my ISP provider. Both said to delete history and cookies and it didn't work.
View 9 Replies
View Related
Feb 8, 2009
I posted before but couldn't get a resolution to my situation. I'm setting up a new user for me on my girl friends laptop. She is on as the Administrator, I created a 'new User' for myself but software such as Blackbery desktop, Google Chrome and the dial-up for my Blackberry don't seem to be accesable, at least not readily> I did go to the Google chrome folder and made it "sharable" with my user account but after going to my account, still couldn't access it unless it went through permission by administrator. I'm confused as I assumed that if any new user accounts were set up that all software that was down loaded and install while in the Administrators user account (my girl friend) that they would be easily accessable in any new user accounts that we set up, right? wrong?
View 5 Replies
View Related
Nov 18, 2009
when opening Windows Live Mail on my laptop it started diectly receiving mail. a few days ago, I noticed that i couldn't send and receive anymore. Windows Live mail is trying to connect.... constantly. After 60 seconds a little window appears with: The server SMTP did't react for 60 seconds. Do you want to wait for teh server another 60 seconds?
View 5 Replies
View Related
