Iīve just built a new PC 4gb ram, intel quad 6600 Asus p5b SE mobo. I installed Vista ultimate on it and itīs taking 5 minutes to start up and it took 5 hours to install COD4! everything is very slow. I installed XP Pro 32 Bit on it.. and it performs as fast as i expected. I installed Vista Home Premium from an Acer recover disk i had laying around 32 bit again and once again itīs quick.
View 9 Replies
I've had vista for around 10 months and never really had a problem with the internet but in the last week I've noticed it is running really slowly. No explaination it just runs slow, really slow. I have AVG, stopped running that, I've rolled back recent windows updates, I've done a system restore to last week. My network card has a greyed out rollback button so can't do that.
Also I've ran some speed tests and I get around 250k download and a 690k upload which again is strange, but I've ran the same test on a eeePC running linux and a laptop running XP and get 1mb download with a 690k upload.
I have a pc that has been booting slow and I checked in the performance area and found two issues effecting the system. One is for slow startup, and it gives me three programs that are doing this. I see one I will not be able to do anything with and two I should. They are:
1.) Symantec ( 67.7 seconds) ccSvchst.exe
2.) Acrobat Distiller (51.1 seconds) acrodist.exe
3.) Windows Mail (28.4 seconds) WinMail.exe
I went to find the programs and get them to stop loading "2 and 3) but they still load up. How do I stop them from loading on startup? Also on the other issue for visual settings. I tried to goto basic vista display but still get this Performance issue coming up in the Advanced tools area.
I've tried all the common fixes posted around the net. I get a two minute boot in safe mode and in reg mode with nothing in the startup. I feel that after looking at the bootlog file that it has something to do with drivers that don't load during the boot. According to the log I have dozens and dozens of drivers that apparently don't load. Here is a sample of the log. I don't enclose the whole log because it is very large. I will if necessary:
Code:
Loaded driver SystemRootsystem32DRIVERSsnapman.sys
Loaded driver SystemRootSystem32Driversmup.sys
Loaded driver SystemRootSystem32driversecache.sys
Loaded driver SystemRootSystem32DRIVERSfvevol.sys
Loaded driver SystemRootsystem32driversdisk.sys
Loaded driver SystemRootsystem32driversCLASSPNP.SYS
Loaded driver SystemRootsystem32driverscrcdisk.sys
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%tunmp.displayname%;Microsoft Tun Miniport Adapter
Did not load driver @hal.inf,%acpiapic.devicedesc%;ACPI x86-based PC.......................
i was just installing some extra languages on the ultimate extra update, i just selected all the updates to download as i was in a rush go leave home, it came up to about 5gb, it wasnt a problem because i was going out for about 4 hours. i came back home, download was complete and was installing the language packs, at first i thought it was stuck because computer started to run extra sluggish, but just as i was about to restart computer the bar moved, so i just waited, just doing some browsing etc on this forum, researching and getting tips and tricks etc., despite the fact that it was still running slow..i checked the cpu usage, the cpu was fine, but with suprise, the ram was running about 1.9gb ( i have 2gb ram). first of all, is the language pack suppose to take that long to install? and is it suppose to use that much of the ram?
View 5 Replies View RelatedI've recently put together a new computer using these parts: I've updated to Vista Ultimate SP1, run multiple disk clean ups, defrags, use CCleaner, clean the registry, defrag the registry, disabled services and have made tweaks according to the guide provided on this website and have minimal startup programs running but my boot times average around 2 minutes. For a new computer with new hardware, this seems unreasonable as many users report boot times between 30-60 seconds. What could be wrong with my computer? On the vista loading screen with the green bar, it goes through about 22 cycles.
View 5 Replies View RelatedConsidering there have been some (doubtful..?) images available on various torrents for weeks now, I'm wondering why so slow in posting the full Vista Ultimate with SP2 slipstreamed DVD .iso on Technet Plus
View 4 Replies View RelatedI see Windows Sound Schemes, and DreamScene Content Pack 3 now available. Also the Windows Vista Ultimate Language Packs are back after the SP1 upgrade.
View 9 Replies View RelatedPurchased an HP notebook with premium and set it up but did not activate yet. Then purchased an Ultimate Upgrade with anytime upgrade. Installed the upgrade using the key from the bottom of the PC when it asked for the current product key. No errors. Finishes the upgrade and restarts and still is running Home Premium. Why did ultimate not take? We need ultimate to login to a domain.
View 9 Replies View RelatedI Have Windows Vista OEM 32 bit that came on my computer. I noticed that the full retail version of ultimate includes the 32 and 64 bit install. With the anytime upgrade to ultimate can I choose between the 32 and 64 bit vista ultimate? I do realize that I would have to do a clean install of the 64 bit OS. I would like to try the 64 bit version but would also like to be able revert back to the 32 bit if the 64 bit doesn't work out. If I can't then the 32 bit version it is as I need to join a domain.........
View 9 Replies View RelatedI just migrated to 64 bit Vista and I have Windows Mail. When I was using 32 bit Vista I had all my Hotmail folders, newsgroups, calendar, etc. when I selected the Mail icon. Is there a way to migrate Hotmail to Windows Mail, or a way to replace Windows Mail with what I had when I was using 32 bit Vista? I had IE 8 with 32 bit and I have IE 8 with 64 bit.
View 9 Replies View RelatedVista Ultimate 64 Crashed, Tried Recovery Dvd, Start-up Repair, Ng, Can't Get Into Safe Mode Or Command Prompt, Tried To Reinstall, Won't Allow Upgrade "upgrade Disablied, Must Be From Windows", But I Can't Get Into Windows. I Don't Want To Do A Clean Install To Much On There. It Also Seems My Restore Poits Are Gone. This Is After Diskkeeper Did A Boot Defrag.
View 7 Replies View RelatedI want to reformat my computer and install Vista Ultimate 64-bit as my operating system. I'd rather not spend a couple hundred dollars to do this when I already own Vista Ultimate 32-bit. My computer came with Home Premium and I purchased a Vista Ultimate Upgrade CD (32 bit). Now what I want to know is if I buy the $30 non liscensed Vista Ultimate (64 bit) CD, can I use my Ultimate (32 bit) Activation key to activate it? This would save me around $150. I talked to the Microsoft guys via chat but we just kept going around and around and they never really answered whether or not the Ultimate 64 bit would accept my Ultimate 32 bit upgrade key.
View 8 Replies View RelatedWhat is the best way to upgrade an OEM (Lenovo) Vista Ultimate 32 bit to Ultimate 64? Can it be done? Is the only way through the OEM? Should there be a cost?
View 9 Replies View Relatedis ther any way to upgrade 32bit to 64 bit??? or o i have to wait for a new
windows???
I have a HP pavilion laptop which came with 64 bit vista ultimate pre-installed. I shrinked the OS partition (160 GB), created new partition (40 GB) for 64 bit windows 7 ultimate. After installation of Windows 7, I cannot see the vista ultimate boot option when I boot my PC. When I boot into Windows 7, I still can see the vista partition. But instead of C: it is now displayed as E: I used the HP Recovery Disc to repair windows vista but I can only see a blank blue screen with the mouse pointer. How can I recover the vista?
View 9 Replies View RelatedProblem:
1) Extremely slow shared printer response
2) application nonresponsive while printing
Network Topography:
1 Vista Home Premium 32 PC
1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer:
Connected via parallel to Vista 32 machine
Printer is configured for sharing and is installed on both machines
test pages print successfully from both machines
Additional notes:
During printer setup on the Vista 32 machine, I attempted to install
additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were
identified successfully, and I added the network printer. I was not asked to
install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs
with normal speeds. Printing from the network computer Vista 64 using the
shared printer installed on Vista 32 is extremely slow. Even typing in print
job changes in the print dialog window takes 30 seconds or so for each key
stroke to register a response onscreen.
I just bought a new laptop a Dell XPS 1330, with Vista. And it is slow in launching everything. Once I'm in a program, it's usually okay, but it takes 5-10 seconds just to open the start menu, or switch between programs, or open a program is more like 20-30 seconds. It's even slower if I'm coming out of sleep mode, it never gets faster, I always have to boot even though I see nothing in the task manager. Is this the way it is supposed to be, and if not, how can I tell if this is a Vista problem or the laptop? My cpu runs at about 3% capacity and my ram is around 50 when no applications are open.
View 9 Replies View RelatedMy Vista x64 Ultimate was fast at first, but now after around 6months it has been slower. I have cleaned all Vista components and uninstalled unnecessary softwares/games. My HDD has 70% space remaining and its defragged. I have fast AVG antivirus and when I try to open a new folder, let's say my documents folder, it opens it fast but its all blank white and it keeps loading for like 3-5 seconds and then the contents show up. What's wrong? I expect an immediately folder content showing up especially when I have 3.55 GHz quad core and 8800 GTX T_T
View 9 Replies View RelatedI have found a solution for slow IE problem, it made my browsing extreamly faster.
Tools-> manage add-ons-> enable or disable add-ons
under enabled section look for "SSVHelperClass"(java plugin add-on) and highlight then click disable button.
Restart IE and you could see the difference.
Since my CPU is 1333, if I install DDR-2 800 rams, my ratio will be 5:4 or something like that.
1. Will my rams slow down to the FSB of the CPU?
2. If yes, what is the point in installing faster rams if they are slowing down to the FSB of the CPU?
3. If there is a benefit, what is it?
4. If rams are faster, do they somehow increase the performance of the graphics cards? (For, both ATI and NVIDIA make use of the system ram Hyper Memory and Turbo Cache)
5. Wouldn't it be effected by CPU's FSB? Lets say you have a DDR-4 graphics card, and your rams are DDR-2 800, rams are slower than the card, and CPU is slower than both of them.
I purchased my system (Laptop, dual core HP Paviolion dv6700) and installed vista home premium in December 2008. In the beginning system's performance was good but now (within 6 months) it starts so slow. What may be the problem.
View 5 Replies View RelatedI am on Vista Home Premium 32bit
Recently my Wireless has slowed down.
I have used speedtest.net to check my speed and i was getting at around 3mb
I tried with my XP Laptop and i got at around 11mb
They are both in the same location.
Can anyone help me find out why i get such low speeds on my PC than i do on my Laptop.
Desktop 6 months old and time gone haywire today.Updated it a number of times but keeps going slow>
View 9 Replies View RelatedI searched for "IE8" and it said no results...find that a little hard to believe
Anyways, odd problem to have. After being logged into Winders for a little while, doing some surfing, etc., I'll go to close IE8, click the red x, and it'll just sit there for 5-6 seconds, and then finally close. If I log off and log back on, it'll behave properly, but sooner or later will start to act up again.
Anyone else run into this? I'm running IE7Pro, but I've been running that for a while now and this has only recently popped up.
I have a Sony Vaio VGN-FZ11S, with Vista Home 32. The laptop has a Core 2 Duo T7100 @1.8GHz and 2Gb RAM. I run Office 2007, Dreamweaver, Flash, Fireworks, Corel, etc... Sometimes the machine becomes so slow I almost fall asleep (literally!) while waiting for it do perform a simple task such as opening IE or showing a menu or opening an email message. I should add that my PST has 5.6 Gb. I'd like to reduce its size, although I don't think it is the cause of the slow running, but I need to keep many emails... I have talked with Sony and they simply refuse to let their customers downgrade to Xp. So, besides tweaking (which I don't know how to), what can I do to my laptop to avoid these episodes of EXTREMELY slow running?
View 9 Replies View Relatedmy browsing with vista is very slow & lagging no matter which browser i use IE or firefox.
View 9 Replies View RelatedI have have continuous slow response in loading of web pages since install IE 8.Am running on a 5 meg internet connection and at times loading a simple Amazon page will take 85 seconds. Totally unacceptable when it was instantious with IE 7.How do I return to IE 7 as attempts to do so thru MS site informs me of a 2 hr plus download?
View 9 Replies View RelatedI am experiencing very slow boot up of Vista Home Premium 32 bit. It takes good 10 - 12 minutes to completely boot up. I am using Dell desk top inspiron with 4 Gb RAM. I did some research and learnt how to filter the event log and diagnose where the degradation occurs. In my case, a lot of degradation found in loading drivers like sound and video. Also AVG resident shield slows down.
When I first turn on the system, black screen with a mouse curser appears for two - three minutes. Then Welcome message appears and again it blanks out for another two to three minutes. Then the desk top appears and the icons are slowly appearing. By the time complete boot is in place - system idle mode, it is ten to twelve minutes.
I'm running a dell dual core with 2 gb of memory and a 200 gig hard drive, with Mozilla Firefox. In the past I have been able to peruse perhaps 15-20 web pages, reduced in size and it hasn't slowed down at all. All of a sudden after four or five windows accrue the computer comes to nearly a stop and it takes forever to load that last page. I have to wait a long time before I can even close the windows.
I have cleared all the temp files and cache, removed cookies and cleaned everything up.
Until yesterday my internet worked fantastic. I could click on a favorite or my homepage and instantly be on the site. Now, all the sudden whenever I click on a page it takes 10-15 seconds (sometimes more) before the page 'hits'. It will then load as fast as before. The problem is this new 'waiting period' before the page loads. I have a high speed connection with 27795 kbs down and 958 kbs up. I thought maybe my browser had become corrupt somehow so I upgraded to IE8 but still have the same problem. My system is spyware and virus free (just checked twice).
View 9 Replies View Related
