My Vista Ultimate x64 version had been running great for about a month an half. Then one day the audio began to get choppy. The audio works fine for about 30 seconds and then it seems like it get distroted like people are talking slower. Im thinking this might not just be an audio problem with the driver but maybe a video problem. So I installed the newest WHQL supported video drivers. Still didn't fix the problem. Then I installed the newest realtek AC 97' audio drivers. Still didn't work. I even formated Windows Vista Ultimate x64 and did a clean install and I still have the problem.
I am getting the following error message when i am trying to watch a streaming video on the Netflix website:
Microsoft DRM software error Your Microsoft Digital Rights Management software is not working properly and needs to be reset.
To resolve this issue, please call Netflix technical support at 1-866-402-2616, or contact technical support here and report the following error code:..............
I am running Windows Vista Ultimate and when I stream videos from websites like Gametrailers.com as either a Windows Media or a Quicktime file the video is choppy and has sound issues. If I download the same video there is no choppyness and once the stream is no longer on HTTP and is on CACHE it is fine. I know i have enough bandwidth for the video and under statistics I does not show any errors .I have all the latest drivers and service packs. I have reinstalled Vista as both 32 bit and 64 bit to see if there was some difference. I also have this same issue on my Laptop running Vista.
for awhile i could play videos with no problems, but now when i try to play them (from Internet for example) they stop and start and stop and start with that circle thingy whirling when it pauses and take forever. i tried uninstalling the adobe flash player and reinstalling it, but that has not done anything to fix the problem.
I have a problem with the the capture of my video into Windows Movie Maker. I have now recaptured the video again after ensuring that all othe programmes on the computer are disabled, however the problem still persists. During the actual capture process the video runs at normal speed and there are no fluctuations in the speed during that process. I do notice that the capture display on the computer tends to stop and start from time to time, but I believe this is normal and does not indicate a problem.
Once the capture is complete and I play back scenes from my capture, then the speed of the playback varies all the time, sometimes running faster than original capture and again slower at other times. I am sure that I have read somewhere that this is not abnormal during the video editing phase. However the problem arises in that once you publish the video these speed variations are written into the published video and subsequently transfered to the DVD.
There seems to be a problems with how Vista and WMP11 is looking at Video. I can go to google video and play everything in XP WMP11 but in Vista I only get sound. I have looked at many message boards and there are a lot of people having this problem. I have the most up to date version of WMP loaded, I had WMP check just now and I am current.
I am trying to import video via firewire connection. I'm getting video but no sound. The control panel settings show "wave out mix" and microphone. How do I get the sound to import?
have you guys experienced this? Even when turned all the way up, the video playback is great, but the audio is simply too low. Virtually every time. I installed some x64 codecs, but to no avail. The same happens on my 2nd T60p which runs Vista Ultimate 32-bit. I use the VideoLAN player, which plays back almost anything, and I also am the proud owner of a license for PowerDVD Ultra, Deluxe version. No audio problems there. I have installed Service Pack 1 on both Ultimate x64, as well as x86, and the issue is the exactly the same. Am I overlooking a small thing, such as not putting a checkmark in the right place? Is there some other kind of workaround?
My first post here but been hanging out here alot and learned alot.
Well, i previously had Combined Community Codec Pack but after viewing the thread on vista64bit codecs, i uninstalled this and used vista64bit codecs. But then i could play only media center not my windows media player. So after getting so annoying i installed Combined Community Codec Pack again.
But now i play any video, i feel the sound not in sync with the movie, as its slower then the video.
P.S : I use DIGITAL CABLE for my z680 and my supreme fx 2 sound card is just idle and not in use of my asus rampage. Also i use 9800 gfx from which a friend of mine has done audio output,
I have a laptop with Vista Ultimate SP2 x86 installed and when I try to = run a movie or music DVD from the DVD ROM there is no sound in either = Vista Media Center or Media Player. Sound works for everything else, and = the same DVD's will play fine when loged on to XP Pro SP3 X86 on the = same machine. I have tried updating the driver, everything suggested by HP support, and = nothing has worked. The only way I have been able to get sound with the = DVDs in Vista or Win7 Ultimate x64 on that same machine is by installing = the VCL, which plays the same DVDs from the same ROM fine. =20
i imported my videos from my digital camara and the are on there fine. i go to play them and there is no sound. what can i do? i tried making a movie but the sound was not there.
i have bought a gateway M-1628 with a built in webcam and when i open camera assistant software program. it shows nothing the light for the webcam comes on like its on. but it shows no image at all. with the program i can record sound but no video. i uninstalled the driver and reinstalled it and still nothing. just wondering if there have been other problems. i have a Toshiba a while ago with the same program for the webcam just a little different and that one worked at first but just didn't work with messengers and later updated to work. but i can't find new updates of anything for the one i have now.
I'm don't even know if this is a Vista issue but I'm beginning to run out of areas to investigate. While playing WoW, my computer screen will freeze for approximately 3-5 seconds. Generally speaking, this happens after I've been playing for "a while". I've had it happen as soon as 30 minutes into my gaming, or as late as 3-4 hours; however, once it starts it then repeats itself with increasing frequency, reboots seems to help a little. There is no "trigger" that sets it off, I've had it happen in indoor environments, outdoor environments, 25 man raids, or by myself.
During this freeze my toon online will just stand there like an idiot. On my end, the video completely freezes but whatever sound was playing at the moment of freeze will play itself over and over at about 1/2 second intervals, kind of a machine gun effect of sound. I also get a sound from the computer case that might be the sound of a hard drive getting accessed..................
source of video is a Sony DSC-H50 camera set to 'Std' record mode. Ifran reports: width 640 height 471 bitsperpixel 32 frames 378 (25.0 fps) length 15.12 seconds actual playback is too fast at about 9 seconds (Windows Media Player) with 'chipmunk' sound. playback on the camera is 15 seconds camera manual says that in 'Std' mode it should be about 17 frames/sec. Vista Home Premium, SP1, all patches from Automatic updates. Must be something in my setup as I don't see this as common in my Google search.
I've got a problem with WMP 11 playing .wmv files. It suddenly started to play these with distorted sound and slowed video. When I put any graphic file into the forlder with wmv file, open picture and slide to .wmv file it plays ok. I have already tried to reset WMP 11 settings with registry patch and tried /sfc scannow to no avail.
(it's been a while since I've needed this kind of support so let me know if more info is needed) Anyways, from the moment Vista plays the logon sound there is static crackling and chirping noises whenever there is audio playing at the same time as any kind of visual change on the screen (not every screen update). For example videos on websites that play them as plugins are especially static-y. However, playing a fullscreen game (i.e. World of Warcraft) does not produce the static.
Interestingly, I have now tried two different video cards. The Nvidia and now a ATI Radeon, both have the same identical problem. I first thought that it might just be a Nvidia Issue but this is not the case. I have checked for IRQ conflicts and none exist that I can find. I have updated Windows as much as I think I can. I've tried changing Creative drivers as well.
recently I have connected my laptop (Toshiba A135-S4467) to my CRT TV via S-video. this laptop came with a Vista home premium 32bit OS. I have converted it to XP Pro. when I watched movie files (at any player, any file type) on the TV (I used extended desktop option) there was no problem. 2 weeks ago I have re-converted the laptop to Vista OS (using Toshiba's restore disks). and now the problem: when I try to watch movie file (DVD, AVI, MPEG....) on the TV (with any player) the picture has for distortions that can be seen only on the TV screen and not on the computer LCD. I'm using the same hardware as with the XP and I'm using the same TV and the same settings. changing the resolution hasn'the distortion can be seem like offset lines in the middle of the screen.
i cant hear music when im watching videos on Internet and imeem...but there is sound when listening to the windows media player...juz no sound when surfing the internet.
When im watching my shows on my notebook, i always get a annoying error. It keeps freezing all the time! When the movie inside gets faster ( someone is running or fighting ) it tends to freeze a bit and then move on. Its not the movie problem , cause if i replay the video, in the same second that it freezed, it wouldnt freeze in there. I Use VLC Media Player, and already tried it on Windows Media Player, so i think it is not a Player issue. And also, my Framerate is always low in lineage II. I don't understand ! I have a Nvidia 8600m GT and it freezes like hell.Everything should be running smoothly ...
is there a error with my Graphics Card? Cause it is starting to annoy me! I open a folder, and i have to wait like 10 seconds for the Icons to show up.Is it vista? That uses more of my CPU and (kill it)? Even Firefox sometimes lasts 30 seconds or one minute to open up.
Yesterday i got a PCI slot cooler for my video card and i over clocked it some. About 100-125 more on each stat. This is my grapics card i had it running at like 40C MSI USA – Computer, Laptop, Notebook, Desktop, Mainboard, Graphics and more. Also i added a new heat sink but every time i try to boot my Windows XP professional the green thing gets to the middle of the bar and restarts my computer. Here is my board Intel® Desktop Board DG33FB - Overview
Last i took out my video card and went to the on board video and tried that and yet it did not work ether. I tried reformatting thinking it was drivers or something didn't work ether. every time i try installing the OS i get General causes of "STOP 0x0000007F" errors Divide by zero error A divide by zero is caused when a DIV instruction is executed and the divisor is 0. Memory corruption (or other hardware problems) or software failures can cause this. anyone on here who knows XP well let me know im running a diagnostic test right now to find the problem.
I know this is a repetitive topic, but I can not seem to figure this one out. It is a HP Laptop DV9815nr. I do not know much about it as it is not mine, but the problem is the audio was cutting out and now there is nothing. The computer is not recognizing any type of audio device installed. Even in Device Manager, there is no option for Sound, game and controllers. I have tried downloading the driver and installing, but no luck there.
I keep getting a yellow exclamation point on windows start navigation sound I can go in and select it and it works for the time it is selected. but as soon as I reboot the yellow exclamation point comes back how do I fix this can someone help me please it annoying and aggravating to have to turn that on all the time. I even did a system restore back to yesterday thinking I did something to it no go still dose it. nothing else broken all works good sound everything just not this one.
This worked for me before but I messed it up. I used to be able to record the sound coming from my computer and play it to my microphone right away as it goes. Meaning when I record something, it would record whatever is playing on the computer. But I forgot how to make that setting.
DVD Ripper rocks your life What other advantages of *'DVD Ripper'Select DVD subtitle and audio track Select any available subtitle and audio track provided your DVD movie offers. Advanced Video Encoding Settings Video encoding settings: video resolution, frame rate, encoder, and bit rate. Audio output settings: sample rate, channel, encoder and bit rate. Merge into One file Support join several chapters/titles into a signal file with "Merge into one file" option. Trim any DVD title chapter Convert any clips of DVD chapter/title which you like most. Customize cropped video Cut out the unwanted video area, like black sides. Customize the video frame size according to the scale of cropped video.
Adjust DVD Video Effect Apply video brightness, contrast, saturation, gray/emboss/old film effect, horizontal/vertical turning. Video Snapshot Support takes snapshots of the playing video, and save them as jpeg, bmp, or png. Auto Shutdown Computer Tick "Shutdown your PC when conversion finished", you won?t wait around your computer. Lifetime free upgrade and technical support We provide free software upgrade service periodically; this is privilege only for registered members. No adware and spamware No ad and spam disturbance. All the products listed support free download, it?s free to try until you think they are you wanted of then buy later. Each product has a user guide page of it own with detailed step by step describtion and you will find how simple and fun it is. have a nice day.
I just upgraded to Vista U x64 and am having sound problems. I have a prelude x-fi sound card but the sound coming out of it is extremely low. I have maxed out every thing I can max (control panel sound, creative panel) and the sound level is whisper quiet. I have also upgraded all my drivers except the prelude's, I would but their website isn't offering those drivers at the moment. But the drivers supplied with the card are vista certified so I should get something. But my mobo, etc is all updated. I have been searching for a solution for two days to no avail.
I have a quad-boot Intel CoreDuo machine with 4 GB of memory and an ATI AIW X1900 Radeon (multi-booting courtesy of EasyBCD). To put the matter as quickly as possible, all four systems (Vista 32, Vista 64, XP, and Ubuntu) have been happily coexisting for a long time. I haven't used Vista 64 for about 10 days and went in to do some work on it this morning. To my surprise, the video disappeared immediately after the green startup wait indicator. Eventually, after about the usual amount of time and hard disk activity, the startup sound came on but absolutely no video. I restored my full backup of the Vista 64 partition from last Sunday=97 same problem!
I went in on safe mode but it is impossible to change video settings or install new drivers in safe mode so that was a dead end. I tried the repair utility that comes with Vista but it could find no problem with startup. My working hypothesis is that something has gone wrong with the video drivers although that may not be the case. Even if it were, I can think of no way of fixing it short of completely rebuilding the Vista 64 system checked desperately do not want to do
who has purchased a JVC Everio HDD video camera has probably learned that they chose to use some god forsaken proprietary video format - the .MOD extension. Apparently this is some sort of MPEG2 encoding, however, most major video editing suites prefer not to accept this format? what we need is something more common? such as .AVI or .MPG. I would be happy with the .MOD file format if the software that came with the JVC Everio actually worked.
I have tried many video converters software with no luck so far, it?ll get halfway through the process, and then something will fail. Now a type of converter called *'Mod Converter' appears. Here I want to share the one regarded as the best on the market by most people. I also want to share the instructions about how to use it. Step 0: Free download *'4easysoft Mod Converter 'and install it. ...........
how to convert both DVD and video to PSP video/PSP movie Part1. How to rip DVD and convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM to PSP MP4 video. Part2. How to upload/transfer PSP files to your PlayStation Portable (PSP). How to rip DVD and convert AVI/WMV/MPEG to PSP 1.You can download this software from ' Share : how to convert dvd and video to psp ' (http://tinyurl.com/2ytw9d) for free. Run Cucusoft PSP Video Converter Suite. If you want to rip DVD movie to PSP MP4 Video, press the first button to open "DVD to PSP Converter". Then click the "Open DVD" button to load your DVD files and click start to rip your DVD to MP4 video.
Click "Open file" to import your video files which you want to convert to PSP video. Modify your output file settings.On "Audio/Video Output Settings" panel you can chose output format for you files such as H.264 Movie Note: If you cannot find "Audio/Video Output Settings" press "Profile" button. And you can change some Audio/Video Options and save to a new output format. Click "Output" button to chose where you want to put your converted PSP files.
I have windows vista home basic, installed on my laptop and I am having a problem with the sound recorder. Everytime I open it up, a window pops up saying, "Windows Sound Recorder is not installed properly. Run REGSVR32 WavDest.Dll." How do i go about fixing this problem?
i am having troubles with windows updates and a microsoft tech told me to uninstall anything to do wit sigmatel. i take it that sigmatel has something to do with the sound because now i do not have any. i sent them back an email but they have not got back to me yet. what to do to get the sound back?
