RAID-1 With Different Sized Disks Under , Intel Matrix ICH9R
Jun 10, 2009
I have an ICH9R board and intel matrix storage. I previously had a 1TB drive with 250GB free (not partitioned). I added a second 250GB hard drive. Is it possible to create a raid1 volume (end of 1TB drive+full 250GB drive) without loosing all my data on the other 750GB of the drive? I don't see how to do it in the matrix storage console. I know it's possible to do this with software raid but vista doesn't support software raid-1. If it's not possible, can I backup my data, create a 250GB raid1 array in the BIOS, and create an other 750GB partition during vista setup for less critical files?
View 9 Replies
ADVERTISEMENT
Jun 23, 2008
I've just installed Vista x64 and some applications to work. The the system and the applications are "fresh", proper installed and I would like to create an image of all system (all matrix RAID 0+1) on external harddrive. What software do you suggest for this purpose? Can I do it via ghost.exe from DOS level?
View 9 Replies
View Related
Dec 18, 2008
I need to know what would be the best optition for top performance.
Raid Settings
RAID 0
128KB Strip
It said in raid settings this is for top performance. 64KB for the other not sure what it was. Also should i remove the RAID and then do a full format then low level or just leave the RAID as it is. And what should i make it RAID 0 RAID 1 or RAID 5 for performance. I'm a gamer.
View 9 Replies
View Related
Jun 1, 2008
How to make all the folders into medium sized icons. i mean i don't want windows to remember folder settings separately. and i have tried removing this (remember each folder view setting) like in XP but it didnt help. and also if i reset everything in >views reset folder. all icons turns into detailed view but i want them to be medium sized.. is there any possibility to turn all into medium sized icons??
View 5 Replies
View Related
Apr 21, 2009
I'm trying to convert a custom-sized InDesign file to .XPS. When I choose the XPS Document Writer, it gives me the option of choosing a paper size. I choose A3 and the document preview showed it fit. But when I actually print the document, it creates a letter-sized .XPS. I've changed the specifications for the XPS Document writer to print to A3, but it still won't print a copy of the entire original document. I got it to work once before weeks ago, but now I can't remember how.
View 5 Replies
View Related
Mar 5, 2009
I _FOR_SURE_ ordered this printer and from what I am understanding the driver is built in my windows Vista system. Does this mean when it gets here I should just be able to plug it in and it will be picked up or? I also run a HP Photosmart C6280 on my main desktop computer....can both printers be hooked up or could I hook up the dot matrix to my lap top (which also has vista)
View 7 Replies
View Related
Mar 26, 2008
I thought I had been able to make a backup of a Vista Ultimate System on a Raid0 array (C: partition using the standalone Acronis True Image 10 boot disk) and copy it back to a non-Raid disk. For some reason Vista will not boot correctly and the Vista boot disk Repair Option thinks about it for 5 minutes or so and then says it can't fix the problem. I know I have done this trick with WinXP and I thought I had done it with Vista. I know I can do the save/restore routine (Raid0 to Raid0) with the Acronis standalone software. what I have to do to get a Raid0 version of Vista Ultimate transferred to a non-Raid disk using all the same hardware.
I have the Vista Ultimate System on a network so I can backup to a different controller and hard drive, delete the array, reformat using Partition Magic 8.0 and restore. The only reason I am trying to do this trick is because the SATA controller on the motherboard does not support Raid Arrays and SATA DVD Drives together...and...I want to install multiple SATA DVD Drives on this system.
View 7 Replies
View Related
Feb 1, 2009
I m looking to buy a new desktop as i m now fed up with my compaq laptop. I was wondering which combination would be better? 1: Intel Motherboard and Processor with Nvidia Graphics Card? 2: AMD Motherboard and Processor with ATI Graphics Card?
View 9 Replies
View Related
Oct 2, 2009
Quote: The giant chip manufacturer Intel today announced that 97% of its test community would recommend Windows 7 to their colleagues. These claims were made after a 3 month evaluation with Intel’s employees. Intel have also said they plan to begin Enterprise Deployment of Windows 7 at the beginning of 2010. This would replace Windows XP (Intel like many others didn’t adopt Windows Vista) which is currently on their companies laptops and computers. More - Intel Give's Windows 7 The OK | Windows 7 News
View 9 Replies
View Related
Apr 10, 2009
My Intel E8400 is looking very hot now a days. The cooler is stock. See the pic, is this normal or I need a better cooler?
View 9 Replies
View Related
Dec 31, 2009
i have a gma(graphics media accelerater)950,i got the core clock from 166 mhz to 400,helps by around 10 frame rates per second,i use GMA booster as a tool for overclocking,is there any other freeware out there
View 4 Replies
View Related
Jun 29, 2008
Any instructions for overclocking an Intel Q6600 Quad CPU. Want increase to at least 2.9mhz from 2.4mhz. Or suggestions for a different CPU, Quad preferred
View 4 Replies
View Related
Aug 28, 2008
What is overclocking? Firstly, it is currently the mostly widely used word that does not appear in the English dictionary...... Secondly, it is operating hardware (particularly CPU, RAM, motherboard, and video card) above and beyond rated specs. Rated specs are the level to which a particular piece of hardware is expected to, has been tested to, and is warranted to perform. What this equates to in the real world is a certain price tag for a certain level of expected performance.... Overclockers strive to determine not what hardware should do, but what can do.
Overclocking is more of an art than a science. There is no combination of settings that will yield the best results for every system...... Greater experience does make the overclocking process less cumbersome, but it is and always will be a trial and error process..... Don't be afraid to experiment, but always take things slow and be aware of temperature and voltage limits. Overclocking Basics (particular to Intel systems, though many of the concepts apply to AMD systems as well)
1) Limitations - Each hardware component has physical limitations that, at a minimum, meet the rated (stock) specifications..... In the process of thoroughly overclocking a system, the actual limitations of various components will be found. In general, the CPU, RAM, and motherboard will control the overclock, but other components such as the PSU and cooling will have a major impact on overclocking abilities..... Depending on which of the three primary components (CPU, RAM, and mobo) is the first to reach its limits, different steps can be taken to squeeze more out of the other components. Video card overclocking is generally independent of overclocking the components previously listed.
2) Overclocking in the BIOS vs. overclocking software - Whenever the option exists, manipulating BIOS settings is the best way to accomplish overclocking..... BIOSes on value/low end motherboards and on proprietary systems such as Dells and HPs generally have few to no options available for overclocking....... On such systems, there is the potential to overclock through software, though there is not a single piece of software to overclock every board............
View 9 Replies
View Related
May 28, 2008
I am running Windows Vista Business on a Vaio VGN-TZ21WN and I loathe the entire experience. The notable changes in SP1 list gives me some hope, however SP2 won't come up in Windows Update. Before I use the standalone install, I have read all the possible reasons why this might happen and it appears the only driver issue left is the Intel video chip: I am stuck with 7.14.10.1387
The update from Intel won't install - asking me to get an update from Vaio. Vaio are not offering anything new yet. Longshot time: Has anyone else here forced an install SP1 in a similar situation? I am keen to at least try and fix this nasty, nasty OS before I am just forced into buying a Macbook instead.
View 6 Replies
View Related
Sep 18, 2008
I built a computer for a friend of mine running Vista Ultimate 32bit OS, with SP1 installed. Everything's been working great, except one annoying issue that I can't get to the bottom of!! When the machine is shutdown from the operating system, it powers all the way down and then it turns right back on...I've checked all of the wake-on settings in the BIOS and Device Manager, checked the powerconfg -devicequery wake_armed from the command line and disabled all of the devices that showed up, clearing all of the entries...I've updated the BIOS and Chipset drivers too. I have the Intel DG33FB Motherboard with Intel Core 2 Duo E6750 Conroe 2.66GHz LGA 775 65W Dual-Core Processor installed.
View 5 Replies
View Related
Mar 9, 2010
im trying to set up my CMOS on my motherboard but i cant figure out how to get into it all i can get is bios i wana overclock my CPU
View 6 Replies
View Related
Mar 27, 2009
Im looking to upgrade my cpu to a intel core 2 quad or possible an i7. Are there any good AMD equivalents that i should consider? And where are some good places to buy the processors when ive decided which one to get, as i dont want a whole machine, just the cpu.
View 5 Replies
View Related
Jun 27, 2009
i have a dell xps 630i thats running windows vista. on friday, around 230 eastern time, my computer crashed. when i went to turn it back on tho, i saw something different with the dell writing, and the intel logo on the bottom right corner. they both were covered with dots eveywhere. After that screen passes by, i got a different new screen that i never got before. it was a phoenix awardbios screen. and below that it said, floppy disk(s) fail (40).
never seen that before. when i try to start my computer up, i can either go to start up repair or start normally. when i do the start up repair( ive done it 9 times already) it says my computer cant fix the problem, and then i can either send or not the error report. and when i start it up normally, it goes to a blank screen. and then my computer goes into power save mode. anyone know whats up with it and how i can fix it.
View 6 Replies
View Related
Feb 24, 2009
hope u all doing good. Guys i've intel e8400 3.0ghz but it is running only 2ghz. is that normal???
View 4 Replies
View Related
May 8, 2008
Vista advisor reports no compatibility for Intel SMBus Controller - 2930. This is a viable controller with the latest driver. Will this give me a problem when installing Vista? Was curious why it woud report as no "no compatibility?"
View 4 Replies
View Related
Aug 25, 2008
It looks like since i updated Vista with SP1, i'm experiencing paquet loss. The motherboard is a Tyan 5400xt. (bios Updated to 1.01 - Latest stable) My cable modem box (ISP one) is on 192.168.1.1. When i ping -t 192.168.1.1 i have about 30% paquet loss !I changed the cable, the port on which the cable is plugged. Disabled IPv6 etc ..
It still happens.
When i do the same test with another computer @home (running vista 32, 3Com chip Lan) No probelm ! Prior installing this 5400xt, i was running a K8we, vista Ultimate x64 SP1 same cable, same switch port : No problems at all. So i suspect some bug / incompatibily with this Lan chipset and Vista. I'm running MS drivers because i cannot install the latest Intel Lan drivers. When I want to install them, it stops with a "software not compatible with this version of windows".
Here are my plans:
Boot a linux live Ubuntu : ping -t and see if it'shardware related or soft. Then (i suspect soft) Reinstall Vista from Scratch. Update just before SP1. Install Latest Intel drivers ( i was able to install them prior applying SP1, but after SP1 it starts to behave strangely and when i wanted to uninstall these drivers to test with MS drivers i was not able to uninstall - software incompatible with this version of windows).
View 4 Replies
View Related
Jul 1, 2008
Following a report Monday on the Inquirer, the New York Times reported Wednesday that Intel's IT department "found no compelling case" for upgrading.
And that's despite the fact that it's been nearly seven years since XP debuted. It's not a good thing, if your customers are electing to stick with 7-year-old technology. (In fairness, XP did get a fairly big update with Windows XP Service Pack 2, but even that is four years old at this point.)
Microsoft, which once predicted businesses would adopt Vista at twice the rate they moved to XP, has scaled back its ambitions and these days talks a lot about how long the adoption curve is for businesses when it comes to new operating systems.
View 9 Replies
View Related
Mar 23, 2008
My computer performed an automatic update Saturday night. This was deemed "important" by the Windows Update program. It completely blew up the graphics on my computer, a 4 month old Dell Insperion 530S running Vista Home Premium. It turned my 19 inch monitor into a 12 inch monitor. Some web pages were squeezed into the middle of the screen, with blank spaces on each side. Some were spread way out. Some were all the way to the left, some all the way to the right. Neither Word nor Excel displayed properly. Only Quicken seemed okay, but not QuickBooks. I restored the system to the previous settings, and fixed the problem, but automatic update did the same thing last night and I had to restore it again.
I have disabled the automatic update feature, at least for now. I don't want to be subjected to this every morning when I wake up! I don't know if this is an Intel problem or a Microsoft problem, but the lack of testing on a update like this is just inexcusable......
View 9 Replies
View Related
Feb 23, 2007
vista is not supporting my drivers...i searched a lot at intels website and google but could not find any solution.. Need the required Graphic drivers or steps to solve this problem..i really cant go for a new PC right now...i heard we can overcome with this problem.
View 9 Replies
View Related
May 26, 2008
HP Compaq Desktop - Vista Home Premium. Installed Intel Grapfic update (recomended by Microsoft for SP1 installation. Sure enough, SP1 appeared for download....and downloaded successsfully. Everything working good. But.......now, after the computer has been asleep overnight, when I wake it up, the screen resolution has dropped from 1280-1024 to 800-600.
View 7 Replies
View Related
Jun 8, 2008
Is Intel's Viiv just something similar to Microsoft Media Center, or is it something that enhances video performance? It's rather confusing, as what I find seems to imply it's a 'hardware and software solution'....
I'm trying to figure out if uninstalling it (it came with the computer) would cause any problems. If there is a no_junk in my address, please REMOVE it before replying! All junk mail senders will be prosecuted to the fullest extent of the law!
View 8 Replies
View Related
Dec 19, 2008
I have an Intel Core 2 Duo E6750. I'm seeing an "Intel Graphics Media Accelerator Driver" update and it shows a list of chipsets, but mine is nothing like the ones listed. Intel® G41 Express Chipset Intel® G43 Express Chipset Intel® G45 Express Chipset Intel® G31 Express Chipset Intel® G33 Express Chipset Intel® G35 Express Chipset Intel® Q33 Express Chipset Intel® Q35 Express Chipset Intel® Q43 Express Chipset Intel® Q45 Express Chipset Intel® 82G965 Graphics and Memory Controller Hub Intel® 82Q965 Graphics and Memory Controller Hub Intel® 82Q963 Graphics and Memory Controller Hub Intel® 82946GZ Graphics Controller Intel® 82945G Express Chipset Are any of these it? I'm unable to find what it would be called. Even doing a google search did nothing.
View 5 Replies
View Related
Mar 2, 2010
i`ve seen a video in Internet where the user overclocks his e2220 (that is my cpu model) from 2.4ghz to 3.16ghz. i got a question: after overclocking will i need a new cooling fan?
View 7 Replies
View Related
Sep 20, 2009
The Intel Graphics Media Accelerator 950 mentions a PCI Express X16 port:
Benefits to Consumers: "PCI Express* x16 port available¹ to upgrade to higher performance graphics card if required for extreme gaming."
Benefits to Business: "PCI Express* x16 port available. Single platform can be deployed for broad range of client user needs, allowing upgrades to higher performance 3D graphics cards if required." My graphics: Mobile Intel® 945GM Express Chipset Family (Integrated into the motherboard)
Does the Accelerator offer anything for my laptop at all regarding the PCI feature (specs also @ the link below)? Because the footnote under Upgradeability says at the bottom of the page:.......................
View 4 Replies
View Related
Aug 22, 2009
I am configuring/personalizing a new HP Pavilion dv7-2173d with Vista home 64bit OS. I'm making recovery disks using blank CDs I had in the house. Using those disks I need 20 of them. I know the recovery disks will include all the software I won't use and don't want. Do I need to do all 20 to get recovery disks jsut for Vista?
View 9 Replies
View Related
Mar 29, 2008
I have a Toshiba laptop and it has come with a single 120Gb hard disk. However it is partitioned into a C drive and an E drive split 50:50. I don't really need to have two seperate areas in this way and would like to combine them together to have a single logical drive on the laptop. Can I do this from within Windows Vista that is installed on the laptop?
View 9 Replies
View Related
