Intel Logo On The Bottom Right Corner
Jun 27, 2009
i have a dell xps 630i thats running windows vista. on friday, around 230 eastern time, my computer crashed. when i went to turn it back on tho, i saw something different with the dell writing, and the intel logo on the bottom right corner. they both were covered with dots eveywhere. After that screen passes by, i got a different new screen that i never got before. it was a phoenix awardbios screen. and below that it said, floppy disk(s) fail (40).
never seen that before. when i try to start my computer up, i can either go to start up repair or start normally. when i do the start up repair( ive done it 9 times already) it says my computer cant fix the problem, and then i can either send or not the error report. and when i start it up normally, it goes to a blank screen. and then my computer goes into power save mode. anyone know whats up with it and how i can fix it.
View 6 Replies
ADVERTISEMENT
Mar 23, 2008
I am unsure what has caused my problem, so I was hoping someone may be able
to shed some light on it for me. I am running, Vista Business 32bit. Everything had been working fine, but without any changes to hardware, software or drivers I now have resolution problems. Firstly, when I boot my pc up it all goes well until just after the ???Windows Vista??? logo at the bottom of the screen comes up (during boot) the monitor goes into standby mode. Now the only way I have found to get my monitor out of this is to unplug the DVI cable from the back of my tower and plug in back in. The monitor then runs as normal ??? SO THATS ONE PROBLEM. Secondly, when the above problem first happened (and this is still happening) my resolution is stuffed. My monitor can go up to 1680x1050 and my Video Card can easily handle this. (Which it had been doing). But now I can only achieve 1024 x 768.
View 6 Replies
View Related
Mar 23, 2008
Running Vista Ultimate 64-bit. Time displays in lower right corner, as desired. Is there a way to have the date displayed there too, along side the time?
View 5 Replies
View Related
Jan 6, 2010
there's a really old thread about this already. But it didn't solve my problem. When I boot vista, a little white square appears in the upper left corner. It's not my wallpaper. On the old thread they have resolved the problem as being an ATI GPU Driver problem, and the update fixed it. But here's my problem, I don't have an ATI GPU. When I right click the little white sqaure I can open up its properties, and in the properties it has a name of some website. Shortly after I even read it a "close program" window comes up. I click on close and the sqaure dissapears until the next time I boot. Leaving the white square on just messes with whatever programs Im running. For example: If im watching a movie in full-screen, it will randomly just exit out of full screen. It doesnt do that once the white sqaure is off.
View 7 Replies
View Related
Mar 23, 2008
I have a friend who attempts to send email containing pictures in the body of the message. But when I open the mail from here all I get is a blank outline with a red X in the upper left hand corner. Is this something setting in her system that causes this and if so how can it be changed?
View 9 Replies
View Related
Aug 16, 2008
I'm running an Acer, don't know what kind because sadly my mother made me throw away the computer box. Anyways I logged off for a minute and when I had logged off I saw a little blue box in the corner. So I clicked it and it gave me all of these options to (I suppose) enhance my computer. So I clicked a few to just try it out and look. So one of them was "enhance contrast" or something like that and when I had clicked on it my computer went all black, purple, blue, and green. It looked like this (actual screenshots from my computer) So I tried to fix this and I can't seem to do so.
View 4 Replies
View Related
Jun 9, 2008
i have a windows vista home premium cd. it came with a product key but i already used that. i wanna know if i can use that same cd to install windows vista but using a different product key that displays under my laptop.
View 8 Replies
View Related
Apr 13, 2009
My max display resolution is 1280x800 (fujitsu generic monitor), and it seems I can't see the bottom of the popup where you change/edit signatures. Isn't there supposed to be somewhere in these options where you can click an OK or apply button?
View 7 Replies
View Related
Apr 10, 2009
I just re installed Vista Home Premium. It is an upgrade copy. I did a clean install which I have done many times before. I just noticed this morning in the lower right corner Windows Vista (tm) Evaluation Copy. Build 6002 this caught my eye because I am also using Windows 7 on another maching and see the build number of that sysem. I bought the copy of Vista and thought everything was
View 9 Replies
View Related
Aug 7, 2009
I can't figure out how to put all of my icons in a bar at the bottom of my screen?
View 9 Replies
View Related
Jul 30, 2009
Changing The Color On Top and Buttom Of My Computer
I couldn't find how to change the color of this.
View 3 Replies
View Related
Feb 6, 2009
is there a way to default windows mail so that instead of starting to type at the top, it starts at the bottom of the message? You only need two tools: WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.
View 8 Replies
View Related
Dec 12, 2007
I know that sp1 is for evaluation and for testing and all, but is there anyway we can remove that watermark at the bottom. I know its something with the .mui file, and i have been able to get rid of it in x86 vista sp1, x64 seems as if there is something different.
View 4 Replies
View Related
Nov 8, 2009
My laptop inspiron 1515 (I know it starts with 15) has below it, a switch you can make "lock" in place and also has a picture of a lock next to it. I pushed it all the way and it locked in place, and I can't get it to go back where it was or unlock. Felt like breaking the thing but I thought maybe someone here would know what it's for.
View 9 Replies
View Related
May 17, 2008
I have had a corrupted system for some reason so had to remove everything and restart. However. The Vista Product Key on the bottom of my Laptop has faded so a few of the letters look unrecognisable. I have tried what I believe it to be and it doesn't work. As I have not exactly lost my Product Key, Is there a way to get this product key from somewhere without paying for a new one ?? I have activated it with microsoft and provided my details so should it be registered to me somewhere ??
View 9 Replies
View Related
Jul 29, 2009
On my desk window my lower toolbar is no longer accesable. The on with the clock, network e.d. in. Also the quick launch icons the minimized windows are no longer clickable. If I click on it I recieve the error sound. Only the windows main icon works on the lower left side. It is very irritating to need to open a window that is minimized via the taskmanager to activate the window. What's wrong with my toolbar and how can I restore it?
View 7 Replies
View Related
Apr 29, 2008
I created a signature in windows mail and it is inserted in every mail and reply at the bottom of the mail. However, I always reply on top of a message so that the person who receives my reply doesn't need to scroll down to read the (latest) reply. Now, I have to move the signature from the bottom to the end of my reply, above the original message I received. Is there any way to insert the signature on top of a reply instead of at the bottom?
View 6 Replies
View Related
Jun 28, 2008
I can't see all the text in certain Vista screens and cannot access the bottom of the screen (i.e. sounds, DPI settings). I couldn't install the Vista SP1 because I cannot access the area to check off "I Accept". These screens cannot be made larger and have no sidebar sliders. In DPI Scaling box (which also does not show all text), the "Default scale 96DPI" choice has a strikeout line through it and it is grayed out. The only choice is "Larger scale 120DPI". My monitor is about 4 years old, 17" LCD Flat, eTronic brand 1710. Monitor settings in Hardware is PNP Generic.
View 4 Replies
View Related
Nov 8, 2008
it only has 'task status' on top and 'end task/switch to/new task' on bottom, if i Right Click on the tool bar icon i get 'close/always on top' no other functions. how do i get the old display back, and how'd this happen to begin with i did a restore to an earlier date. the good box came up, but after i deleted the ASUS crap off it this one returned.
View 5 Replies
View Related
Apr 17, 2008
Need To Fix Boot Logo OS?Vista Home Premium/service pack 1. This is the best install I have ever done (or was)?I did a fresh install and followed a tweak guide at 'NBR Vista Tips and Tweaks Guide - Notebook Forums and Laptop Discussion' which was to very enlightening, to say the least. From there I have been to a few other sites and moved on to fully customizing my desktop/login and??well?this is where I stuffed up?My BOOT screen no longer works properly, even with the original ?winload.exe.mui? file replaced.
I downloaded and used ?Vista Boot Logo Generator? I loved the results on my last install?It worked well. Upon deciding to do a fresh install with Tweaking in mind, I simply coppied over a Boot logo I made previously after allowing permissions and all that as well as changing the NO GUI in msconfig?ect?.BUT
The problem is as follows:??..The original auora background comes up?...and without the Windows is Loading Text???......I mean wtf?I just moved and replaced the original file and I get this on reboot. I have tried making more logos but everytime I restart the same thing. I have disable and re-enabled the boot gui option in msconfig?even putting back the original file does not get it working properly as the loading text is gone from that pic???
View 9 Replies
View Related
May 13, 2008
I would like to put my own logo on the icons on my desktop. I can go in and find lots of icons but would prefer my own, ie: bank logo, ebay logo, etc. Is this possible?
View 6 Replies
View Related
Mar 23, 2008
I have tried to save the following info with the required path, but have been unable to save it from Notepad to another file in an .htm file. I have used the following info for notepad. This would be the path to your logo
View 4 Replies
View Related
Dec 8, 2008
I have A computer In witch i have Done Something In BIOS... I have Set Hight Performance options Default .. So i Set this Option And then Saved And Exited But when The Computer StartS it Looks Like Having another Bios Another Logo and Dont Start Up Neither windows Nor Go ine thE Bios Options So Is there A way To Restore My Previsous Settings OR Something Like That Or To RESET to factory Defaults.I have tried to remove the Battery and Put it Back again But nothing happened :I dont Know Exactly Witch Is my Motherboard But the Only I Remember It Is that the Bios Manufacturer Was AMI : American Megatrends INC.
View 4 Replies
View Related
Mar 15, 2009
I desperately require assistance. Ok, so it's not 'desperately', perhaps frustratedly (is that a word) is better. Windows Vista 64 When I press the Windows Logo Key nothing happens. Well, something happens, a small box above the task bar notifications comes up that indicates "Key Disabled". I've tried just about everything I can think of: Searched Microsoft. I'm absolutly flabberghasted and down right disgusted with Microsoft. Not only for their idiotic implementation of such stupidity, but the total lack of documentation on the subject. I kindly request your knowledge and technical assistance on this matter.
View 9 Replies
View Related
May 6, 2008
Using Windows Mail on Vista Business SP1. Version 6.0.6000.16386 (vista_rtm.061101-2205)
(But I remember this same issue on Outlook Express)
Some newsgroups, like microsoft.public.cert.itpro.mcitp always show as having unread messages. The bottom status bar will say something like '151 message(s), 0 unread, 23 not downloaded'. So, I do a catch up, and the next time it updates, it shows as having unread messages again, but it won't download them.
View 9 Replies
View Related
Mar 23, 2008
This is a list of Windows Vista User Interface (UI) Bugs we need resolved before upgrading from Windows XP. I have also added a list of Flaws I think are important (before I use windows Vista personally). These were found within the space of 3 hours when I first used Windows Vista, and had to customise it.
1. CRITICAL BUG: When untick; Start Menu Properties ??? Keep the taskbar on top of other windows, windows do not always go in front of task bar ??? this makes this customisation function useless as there are times when you will be working on a document and the text you are typing in is not visible as the taskbar lies on top.
2. BUG: task bar dragged from RH side to bottom, task bar no longer dragable (workaround: have to lock and unlock taskbar)
3. BUG: Start Menu - clicking 'favourites', then clicking 'recent items' stops showing content. (workaround: need to close and reopen start menu to fix this. This bug assumes favorites menu has been made visible on the start menu......
View 9 Replies
View Related
Jul 6, 2009
I have a GW M6307 2gigs ram with VHP 32 bit. Over the last several days on start-up the computer will show the GW screen for about 150 sec. then boot normally. I did do a Java update just before this started and have since uninstalled and reinstalled Java with no problem. I ran malware bytes(no issues) SFC ( 2 files repaired from log) and CHK disc. After shutting down for 10min. and a start-up the GW logo was normal(6 sec) with swift boot. This lasted 2 days. I ran SFC again and that appeared to fix the issue again for 2 days.
There appears to be nothing wrong anywere,in fact the box works great. All my drivers and bios are up to date.
It's more of a PIA then a problem....What would be the possible causes for the box to hang on the GW logo for so long??
View 5 Replies
View Related
Apr 27, 2008
I'm sure some of the things that go wrong are due to the fact that my finger will sometimes twitch and depress the mouse button where it shouldn't put something into play on the bad side, but even so, I'd like to know how to fix the problems no matter thie origins. (I'm much better on that since I found the Steadymouse program.)
Not sure what you call the panels that ariced when you push the logo key between the left Ctrl & Alt, but things have disappeared over the past several months. The first I noticed was that the DOCUMENTS sign no longer took me to my documents folder, as it used to do. The other things have been happening (or not happening) in the past few weeks. I don't recall everything that used to be on the right side panel, but here's what's left:........
View 9 Replies
View Related
Mar 24, 2008
I've checked and General is "normal" and boot is not ticked.I get about 15 secs of blackness, 5 secs of progress bar at the bottom,another 10 secs of blackness and then Vista.If I tick no gui in boot, I get "aurora" for the whole duration with no progress bar.
View 9 Replies
View Related
Oct 16, 2009
I followed VistaRookie's 10 step procedure for making a signature with a logo. It worked. Then I added more information and now it doesn't work. My email shows the code stuff instead of just the info and logo. I don't know what I did wrong. I deleted the first try and made the new HTM file using the same steps.
View 6 Replies
View Related
May 18, 2008
When you open up a window (my computer)...you will notice the 'aero' logo in the bottom right corner of the window. How can that be removed or replaced...?
View 5 Replies
View Related
