During Boot Logo Comes Up At The Bottom Of The Screen
Mar 23, 2008
I am unsure what has caused my problem, so I was hoping someone may be able
to shed some light on it for me. I am running, Vista Business 32bit. Everything had been working fine, but without any changes to hardware, software or drivers I now have resolution problems. Firstly, when I boot my pc up it all goes well until just after the ???Windows Vista??? logo at the bottom of the screen comes up (during boot) the monitor goes into standby mode. Now the only way I have found to get my monitor out of this is to unplug the DVI cable from the back of my tower and plug in back in. The monitor then runs as normal ??? SO THATS ONE PROBLEM. Secondly, when the above problem first happened (and this is still happening) my resolution is stuffed. My monitor can go up to 1680x1050 and my Video Card can easily handle this. (Which it had been doing). But now I can only achieve 1024 x 768.
View 6 Replies
ADVERTISEMENT
Apr 16, 2008
This is the best install I have ever done (or was)…I did a fresh install and followed a tweak which was to very enlightening, to say the least. From there I have been to a few other sites and moved on to fully customizing my desktop/login and……well…this is where I stuffed up…My BOOT screen no longer works properly, even with the original “winload.exe.mui” file replaced.
I downloaded and used “Vista Boot Logo Generator” I loved the results on my last install…It worked well. Upon deciding to do a fresh install with Tweaking in mind, I simply coppied over a Boot logo I made previously after allowing permissions and all that as well as changing the NO GUI in msconfig…ect….BUT......
View 6 Replies
View Related
Jun 27, 2009
i have a dell xps 630i thats running windows vista. on friday, around 230 eastern time, my computer crashed. when i went to turn it back on tho, i saw something different with the dell writing, and the intel logo on the bottom right corner. they both were covered with dots eveywhere. After that screen passes by, i got a different new screen that i never got before. it was a phoenix awardbios screen. and below that it said, floppy disk(s) fail (40).
never seen that before. when i try to start my computer up, i can either go to start up repair or start normally. when i do the start up repair( ive done it 9 times already) it says my computer cant fix the problem, and then i can either send or not the error report. and when i start it up normally, it goes to a blank screen. and then my computer goes into power save mode. anyone know whats up with it and how i can fix it.
View 6 Replies
View Related
Apr 17, 2008
Need To Fix Boot Logo OS?Vista Home Premium/service pack 1. This is the best install I have ever done (or was)?I did a fresh install and followed a tweak guide at 'NBR Vista Tips and Tweaks Guide - Notebook Forums and Laptop Discussion' which was to very enlightening, to say the least. From there I have been to a few other sites and moved on to fully customizing my desktop/login and??well?this is where I stuffed up?My BOOT screen no longer works properly, even with the original ?winload.exe.mui? file replaced.
I downloaded and used ?Vista Boot Logo Generator? I loved the results on my last install?It worked well. Upon deciding to do a fresh install with Tweaking in mind, I simply coppied over a Boot logo I made previously after allowing permissions and all that as well as changing the NO GUI in msconfig?ect?.BUT
The problem is as follows:??..The original auora background comes up?...and without the Windows is Loading Text???......I mean wtf?I just moved and replaced the original file and I get this on reboot. I have tried making more logos but everytime I restart the same thing. I have disable and re-enabled the boot gui option in msconfig?even putting back the original file does not get it working properly as the loading text is gone from that pic???
View 9 Replies
View Related
Aug 7, 2009
I can't figure out how to put all of my icons in a bar at the bottom of my screen?
View 9 Replies
View Related
Jul 6, 2009
I have a GW M6307 2gigs ram with VHP 32 bit. Over the last several days on start-up the computer will show the GW screen for about 150 sec. then boot normally. I did do a Java update just before this started and have since uninstalled and reinstalled Java with no problem. I ran malware bytes(no issues) SFC ( 2 files repaired from log) and CHK disc. After shutting down for 10min. and a start-up the GW logo was normal(6 sec) with swift boot. This lasted 2 days. I ran SFC again and that appeared to fix the issue again for 2 days.
There appears to be nothing wrong anywere,in fact the box works great. All my drivers and bios are up to date.
It's more of a PIA then a problem....What would be the possible causes for the box to hang on the GW logo for so long??
View 5 Replies
View Related
Mar 24, 2008
I've checked and General is "normal" and boot is not ticked.I get about 15 secs of blackness, 5 secs of progress bar at the bottom,another 10 secs of blackness and then Vista.If I tick no gui in boot, I get "aurora" for the whole duration with no progress bar.
View 9 Replies
View Related
May 2, 2009
The first time vista launched I noticed that the sound at the opening logo screen was just a long hard screeching sound. Then when I started clicking around and installing my programs in the desktop environment I noticed that all the sounds had been replaced by horrific screeching sounds. After installing the Windows updates (hoping this might solve the sound problem) and my video drivers I restarted my pc. At the startup I still had the screeching sounds but now I also had white garbled lines on my desktop. When I started moving around my mouse cursor the screen started to get stuck at some places and white squares started showing up everywhere. Then finally, to end it all my pc just jumped to standby mode and all I could do is reset the pc with the powerbutton. When restarting the problem starts allover again. When starting up in save mode the white garble and squares don't show up, but the sound stays screechy.
View 4 Replies
View Related
Sep 1, 2008
I've been running Vista for a few months now without much complaint until recently. After booting, the green loading bar is followed by the windows logo before the screen flickers several dark colors and then produces a black screen with a movable cursor. The hard drive light remains unlit after the black screen. Running in safe mode gives the same result. I do not have a repair disk and I would rather not wipe the hard drive with a factory default disk as I have important data on my hard disk.
View 7 Replies
View Related
Aug 4, 2009
when i download a torrent in the bottom of the screen shows me a yellow sign and then a red sign in the yellow telling connection problems and in the red not connectable but it still downloads...what kind of problem is this and how can it be solved?????
View 9 Replies
View Related
Feb 19, 2010
My computer is encountering a black screen with a movable cursor after the windows logo on start up and I have no idea what is causing this. When I start from safe mode (safe mode, safe mode with cmd prompt) it does the same thing. One thing that I've noticed is that when I run it in safe mode it stops at crcdisk and continues on to the black screen.
View 5 Replies
View Related
Oct 8, 2009
I have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
View 9 Replies
View Related
Nov 13, 2007
i went into my HDD and scheduled an error checking..well windows loaded as normal, but no error checking occurred i guess...now after the green bar is done, the screen hangs on a black screen.
View 7 Replies
View Related
Jun 9, 2008
i have a windows vista home premium cd. it came with a product key but i already used that. i wanna know if i can use that same cd to install windows vista but using a different product key that displays under my laptop.
View 8 Replies
View Related
Apr 13, 2009
My max display resolution is 1280x800 (fujitsu generic monitor), and it seems I can't see the bottom of the popup where you change/edit signatures. Isn't there supposed to be somewhere in these options where you can click an OK or apply button?
View 7 Replies
View Related
Apr 10, 2009
I just re installed Vista Home Premium. It is an upgrade copy. I did a clean install which I have done many times before. I just noticed this morning in the lower right corner Windows Vista (tm) Evaluation Copy. Build 6002 this caught my eye because I am also using Windows 7 on another maching and see the build number of that sysem. I bought the copy of Vista and thought everything was
View 9 Replies
View Related
Aug 22, 2008
Is it possible to change the bootscreen with vista service pack 1? Coz I tried tuneup utilities and the one on Boot screen but they dont work...
View 3 Replies
View Related
Oct 16, 2008
0) Run msconfig command and sign the "No GUI boot" option under boot options.
1) Use Vista Visual Master to generate winload.exe.mui with the image you like....
View 3 Replies
View Related
Nov 4, 2009
I just put some more memory in my computer and now cant get past boot bios screen as I cant use keyboard to go past but I am guessing as usb is not active at this point keyboard or mouse does not work
View 9 Replies
View Related
Mar 29, 2008
* When I start the system, it gets to the Vista's bootscreen (where you see the progress bar). At that point, the laptop freezes. In fact, it freezes before I can see the colored boxes in the progress-bar.
* If I force a cold shutdown (by holding down the power-button), and then restart the laptop, it might load fine and everything would be running fine (like there was never any problems).
* Assuming, it didn't freeze and loaded Vista successfully, then I would shutdown Vista through the Start button.
* If I try to start the laptop again, it will freeze at the bootscreen again.
* I cannot tell when it will freeze at the bootscreen..............
View 6 Replies
View Related
Mar 23, 2008
When I powerup my PC It automatically goes to the boot screen. I have to press F1 to get to get past it and to the password screen. I had to reformat my hard drive last month and its been doing that since then.
View 6 Replies
View Related
Nov 18, 2008
I've had an issue with my computer booting properly. I went from a 1:05 boot time to over a 2:00 boot because Vista go's to a black screen instead of loading my desktop. I'm not sure where to start fixing this, I've always been good with computers and have tried all the text book fixes and I have no where left to go. I made a video which is uploading now and will be up incase this doesn't make as much sense as I'd hope. All my drivers are up to date.
View 7 Replies
View Related
Jun 5, 2008
After installing Vista Ultimate w/sp1 on my MacPro, the normal start up was to be presented with the choose the OS screen which included Vista Ultimate and also Vista Business (recovered). I have no idea where Vista Business came from, it was a clean install. My problem is that all of a sudden I don't get the choose the OS screen and it goes into fall back. It does finally boot and the desktop seems the same. My RC flight simulator wants me to enter all the serial numbers again, but everything else seems to work. It still claims to be Vista Ultimate. When I go to Control panel/System/advanced/Startup and recovery there is only one choice for the default startup OS. Vista Business (recovered). I haven't set any restore points (I will next time)
View 6 Replies
View Related
Oct 29, 2007
i have always wanted to get a customized boot screen and have tried amny screens but none of them look good on my screen resolution, i got a 1680 by 1050 screen and all the custom boot screens are stretched out. any1 know any good 1680 by 1050 vista boot screens?
View 5 Replies
View Related
Sep 14, 2009
For various reasons, I have a dual boot with Vista 64 bit and Vista 32 bit on separate internal hard drives. When the dual boot screen comes up, it lists both OS's as Microsoft Windows Vista, without any indication which is which and from which hard drive the OS is coming from. Is there any way to change the dual drive start up screen to be more specific as to which OS to select from?
View 4 Replies
View Related
Jan 17, 2007
There is finally an easy way (easier than before) to change your Windows Vista boot screen and use any high resolution photo as your boot screen. Using a great tool written by Dan Smith it is now possible to automatically generate the replacement language MUI file that contains your boot image files. All you need is two photos at 800x600 and 1024x768 saved as 24-bit windows bitmaps. Then follow these steps:
Download Dan Smith's Vista Boot Logo Generator.
Install and then run from the link in the Start Menu.
Hit Browse for image and select both the 800x600 and 1024x768 resolution bitmap files for your boot screen.
Click on File and select Save Boot Screen File as and save your file.
Next, you will need to replace the winload.exe.mui file in c:WindowsSystem32en-us with the one you just created. Before you copy in your new file, make a backup of the original. You will need to take ownership of all files in en-us as well as give your account file permissions to replace the file as well in order to copy the new winload.exe.mui file in.
The last step is to enable the alternative boot screen setting as shown in this tweak....
View 0 Replies
View Related
Jul 30, 2009
Changing The Color On Top and Buttom Of My Computer
I couldn't find how to change the color of this.
View 3 Replies
View Related
Feb 6, 2009
is there a way to default windows mail so that instead of starting to type at the top, it starts at the bottom of the message? You only need two tools: WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.
View 8 Replies
View Related
Dec 12, 2007
I know that sp1 is for evaluation and for testing and all, but is there anyway we can remove that watermark at the bottom. I know its something with the .mui file, and i have been able to get rid of it in x86 vista sp1, x64 seems as if there is something different.
View 4 Replies
View Related
Nov 8, 2009
My laptop inspiron 1515 (I know it starts with 15) has below it, a switch you can make "lock" in place and also has a picture of a lock next to it. I pushed it all the way and it locked in place, and I can't get it to go back where it was or unlock. Felt like breaking the thing but I thought maybe someone here would know what it's for.
View 9 Replies
View Related
Aug 2, 2008
i have a problem when vista is booting up past the loading bar screen sometimes not always the system kinda hangs when about to boot into desktop?, a mouse pointer appears and the screen is black for about 30-45 seconds then the vista circle icon appears then desktop loads? is this a known problem or just my system?
View 4 Replies
View Related
