No Network, Can I Test To See If The Switch Is Faulty
Aug 2, 2009
Have HP Presario 500, 32bit (nVidea nforce 10/100 ethenet) that was working fine until suddenly no network was recognized- no wireless. When I try to create a connection I get "This computer does not have a wireless network adapter installed and configured", however under device manager It tells me that my card is working fine. It also tells me that my "6to4" adapter (whatever that is?) "Windows cannot load drivers required for this device. (Code 31)" So.... HP and I spent an hour on the phone to no avail. They said it was a known issue and although the laptop is out of warranty, they would repair it, so I sent the unit into HP. Three days later they tell me that it's going to cost $750 to repair my $400 laptop because my laptop has been "dropped".
When I received the unit back from HP (No, I didn't authorize the repairs) lo and behold the wireless light was blue , it recognized my network and all my neighbors as usual, and the wireless worked.... for 10 minutes. The next time I turned the unit on the wireless light was orange, and no network. The internet works fine when connected with a cable to the router. Other laptops can see my network and can connect so I know that it's not the router (Linksys WRG54GS)
Can I test to see if the switch is faulty?
Can I test to see if the internet card is faulty?
Can the 6to4 adapter drivers be at fault?
View 9 Replies
ADVERTISEMENT
Mar 23, 2008
i installed a faulty program and now folder icons have been lost. i know i could live with this but it is really getting on my nerves!!!
View 9 Replies
View Related
Mar 23, 2008
a friend has a new sony vaio with vista home premium installed. For some reason it will not connect to my netgear router wirelessly. I have tried everything. I am however not too hot on Vista as this is my first time with it. The adaptor says its on, but when you interegate it and ask why it wont connect it keeps telling me "switch on wireless adaptor capability". In the network connections it is on, the switch on the front right is swiitched on and the wireless network light on the front is on. The network is fine and working as i have my laptop connected to it. All security is present and entered. It seems to be the computer as it doesnt find any networks when there are loads in the area. Am i missing something exceptionally obvious? Does Vista have another "on" switch for this adaptor?
View 5 Replies
View Related
Sep 14, 2008
I've been trying to download a free CPU temps monitor this afternoon without success and now I seem to have been left with something unwanted on my desk top.
When I'm just looking at the wallpaper and bottom bar ie I've just booted up, I've got the words Test Mode written in all 4 corners of the screen plus Microsoft(R)Windows(R)(Build 6001;Service Pack 1) written at the top middle.
This must have been left over from one of the temp monitors I tried and then uninstalled.
First I tried Real Temp 2.70 and that installed but then I realised I had to pay for it so I uninstalled with Revo Uninstaller. I then tried Speed Fan and Motherboard Monitor but these didn't like Kaspersky and looked like more trouble than they were worth so I uninstalled them as well.
Now I'm stuck with these words on my screen. They are quite small but still intrusive.
View 7 Replies
View Related
Mar 3, 2009
I've looked around on here some and most of what I find is someone eventually getting it to work properly after the instructions on this page:
PeerGuardian 2 RC1 Test
But those are also mostly from 2007, I didn't see anything helpful in 09 on this... Anyway though I installed PG2's RC1 and did what they said where you disable Integrity checks, restarted, and then tried to run it. But even after uninstalling and repeating this process and trying the XP64 version to no avail, I still get a message when I try to run RC1. It says:
Driver Error
PeerGuardian is unable to load the packet filtering driver. This could happen if PeerGuardian crashed and didn't have a chance to unload the driver, or if the pgfilter.sys can't be found.
View 9 Replies
View Related
Apr 4, 2009
I am runing windows vista 32 and it is actualy running ok for me thought I just tryed to run a memory test and found that it runs up to about half or what i have then it starts over. It will do this till i get tired of watching and jump back in to my bios and tell it to run the fast test witch dose not run any real test. Then the comp will boot fine and run ok. I would really like to know how to get it to run a real mem test so i can check my systems memory. I had a problem a wile back where my main board desided to over clock my memory on its own and thought it is now runing ok i want to make sure it did not damaged the memory. I already found that it had damaged my FX card and had to replace it.
View 8 Replies
View Related
May 15, 2010
Just found this site that will let you test the version of your browser add-ons, to make sure they are up to date. Why not give it a try to make sure that you are current. A must do for security.
View 8 Replies
View Related
Jul 6, 2008
I have ran the Microsoft conectivity test many times on my new Netgear DG834G V4(firmware v5.01.09) and it fails on the TCP high performance test(see screenshot attached) I like my Vista tweaks and always had it set to highlyrestricted with my old Tiscali standard Siemens SE587 receiving speeds of over 7Mb on a 8Mb connection almost everyday.
Some of my DSLzone forum buddies have said that theirs passes the test but why does mine fail. I have asked Netgear support and they cannot tell me whether this router supports this feature or not....what a joke!
here is the link to the connectivity test for all routers but you must use Internet Explorer; {url}
Please try and solve this mystery for me. I have just recovered my system recently and it still fails the test so its not my computers set-up.
I will try and attach it seperately this time.
(Click on the X in the bottom right corner after clicking on the image to expand)
View 9 Replies
View Related
Nov 21, 2008
I have a relatives PC around my house with a funny problem that maybe you can give me your thoughts on what might cause this issue. First when its at his house sometimes when he turns it on it will sit practically at pre post test and do nothing. System is Asus M2N SLI Deluxe board, Nvidia 8600GT Video, 2Gb DDR2-800 ram, Card reader, floppy drive, 640Gb HDD,AMD x2 4200+, Antec 900 case and Thermaltake 620 watt PSU i think.
But when i bring it over to my place and fire it up it always works perfect? Any thoughts on why it always works at my house but randomly after using it for maybe months it always seem to do the same thing and look like basically its freezing before it really starts post test. Side note after sitting for a couple of days it looses its bios setting and yet its only 11 to almost 12 months old for the PC.
View 9 Replies
View Related
May 15, 2010
I've been running the PC since new with an adaptor for the monitor cable where this inputs to the PC. The technical side of it is beyond my knowledge but I was advised when I bought the PC that I had to use with adaptor with the secondhand monitor I have. Last year however the PC ceased to output to the monitor and by trial and error I realised that it would now only work without the adaptor.
More recently I began to experience booting problems -the PC sounds as if it is whirring into action as usual but then gets 'stuck' and there is no output whatsoever by way of error messages or anything else. The problem has been intermittent -sometimes it will boot normally other times not at all. I have run just about every HP diagnostic I could find and also the 'start up repair' (latter didn't appear to recognize a problem). The only test which failed was the PCI express status test (code MB152-15W.
Then lo and behold there was no output to my monitor a few nights ago so I used the adaptor I had dispensed with using last year and all was fine again; my suspicious mind lead me to run the PCI test again which now passed. Then tonight, again no output to the monitor -removed aforesaid adaptor again and all was well, ran the PCI test again and it failed. 2 Vista updates were automatically installed when I shut down last night but the content of them does not appear as if it would have any relevance to my problems
View 6 Replies
View Related
Mar 25, 2008
I downloaded Vista SP1 and then tried to download Defender but my computer wouldn't pass the validation test. It had until then! I uninstalled SP1 and then tried but it still wouldn't allow me to download. My copy of Vista premium is legal and was on my computer when purchased it in August 2007.
View 4 Replies
View Related
May 8, 2008
PXE e61 media test failure, check cable
boot failure
press any key to continue
if i boot from my vista disc to repair. it cannot find an operating system but it gives me the option to load drivers, which doesnt help because i dont know which drivers to load, tried changing boot order around to enable just hard drive, but then i get bootmgr is missing also when i turn on my computer it sits on the screen that says intel, press del key to run setup. press f11 tp run boot meny, press tab jey to show post sreen. i tried all of those and the only one that works is the last one...if i keep pressing delete it will bring up the bios.
View 9 Replies
View Related
Jun 14, 2008
I'll be damned if Vista insists on biting me after every damn update! Does MS even test this crap or simply pass it by the testers desk? I get things calmed a bit then another update and I'm losing text and the cursor has an epileptic fit. This is a systemic situation starting last November to present as things were fine till they updated something. I've spoken with users from private community to DOD and they all report same.
View 9 Replies
View Related
May 17, 2009
Just underwent a zillion reboots and finally undid this weirdness - read on. I decided to format my second XP on partition D: and install Vista Ultimate SP2 obtained from Technet Plus where I'm a subscriber. I installed using "Windows Vista with Service Pack 2 (x86) - DVD (English)" ISO from Technet burned to a DVD and used the key I obtained there, not the "Windows Vista Ultimate with Service Pack 2 Checked Build (x86) - DVD (English)". Actually not quite sure what "checked build" is.
It installed OK but while booting I noticed right after the initial scroll bar when the screen is normally all black for several moments, registry entries (?) in white print flashing across the top of the screen, then it booted normally, but I had "Test Mode" in all 4 corners and "Windows Vista...blah blah" in the centre top of the screen. I thought maybe I need to activate which I did, I had entered the key during the initial install. It updated normally, some failed. I rebooted and could only boot either into that or XP. My main Vista on M: & Windows 7 on N: had vanished. Anyway I formatted D: again, removed a few Vista boot files, re-did the EasyBCD number (in XP on C: ) and finally got my old boot menu back.
View 9 Replies
View Related
Apr 2, 2008
I have a Windows "proficiency test" as part of a job interview. Looking at the interview schedule, it appears to last around 20 minutes or so. If I've been using either '98 or xp over the last twelve years or so, is there anything I can do to prepare? I have a feeling this is a very rudimentary test for someone who's used Windows for many years, but I like to be on the safe side. Any sample tests available you know of?
View 4 Replies
View Related
Sep 22, 2009
One day my laptop was open and someone came in and SLAMMED the cover closed, and that messed something up. It will not start up correctly, if my computer is off, and then turned on, this is what happens: It starts successfully to the screen where you have to enter the boot password, after you enter the boot password, the following message just keeps being displayed: Quote: For Realtek RTL8111B/8111C gigabit Ethernet Controller v2.06 (070425) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM. Operating System not found.
Intel UNDI, PXE-2.1 (build 082) Copyright (C) 1997-2000 Intel Corporation It just keeps showing that over and over. I have a "Microsoft Windows Vista Home Premium 32-Bit Operating System Disk" which says "Use this disk to re-install your operating system". If I use this disk will it completely wipe all my old files?
View 7 Replies
View Related
Jul 29, 2009
I have a Toshiba Satellite A100 Laptop. Yesterday suddenly my speakers stopped working. Since then I have tried everything to get the sound back but no success.
Have also reinstalled the audio drivers.
View 6 Replies
View Related
Sep 15, 2009
stuff just hangs in my outbox---still receive mail OK. Here's the error message:
The connection to the server has failed. Subject 'test', Account:
'mail.comcast.net', Server: 'smtp.comcast.net', Protocol: SMTP, Port: 25,
Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
View 9 Replies
View Related
Feb 4, 2009
My mother bought this computer like 3 or 4 weeks ago. Well Adobe Flash Player will not work. It says its downloaded. We had this same problem with Java but now Java is working properly. I need Adobe for alot of websites like myspace.
View 9 Replies
View Related
May 3, 2009
I just installed 4G ram and would like to use it all
View 8 Replies
View Related
Dec 15, 2008
I really do not have a real need for the x64. I want to run games that do not require x64. Also can you turn off DX10 for DX10 games to improve performace - run them from a DX9 instead. All bells a whistles aside - I am gonna streamline this system and I don't need the added junk bogging my cycles down.
IMO XP Pro x32 would do it for me and if possible I will reformat the HD completly without voiding warranty. I really don't need it for what I want to do. It came pre-installed from Asus. There is not alot of support in gaming to warrant the DX10 or the x64 yet and this is not the best gaming laptop. I only spent $650 for the rig couldn't pass it up for that price.
View 8 Replies
View Related
Apr 1, 2008
I Kept Installing Ubuntu And Windows All The Time Every Day All Day And All Night. Just FYI. Once I Powered Off The Computer. Just FYI. I Didn't Know How To Power It Up. Just FYI. I Had To Have My Dad, Who Used To Work As A Janitor At The FBI To Help Me. Just FYI. My Dad Showed Me Where The Power Switch Is. Just FYI. Dad Said To Make Sure Not To Put A Drink In The Cup Holder In The Front Of The PC.
View 9 Replies
View Related
Oct 19, 2008
I was wondering will this tv tuner still work when the dtv switch happens? Pinnacle - PCTV HD Pro Stick USB 2.0 TV Tuner - 82301002301
View 5 Replies
View Related
Jun 15, 2008
i have opened 2 e-mail identities. How do I switch from 1 to another?
View 8 Replies
View Related
Oct 13, 2009
i have a 4870 right now and im looking to get a second one (yeah i know 5000 series are out but w/e) i heard if u crossfire 2 cards u can only get 1 display is this true? im pretty sure it is but anyway im gettign a second monitor and i was wondering if its possible to switch off from crossfire to normal so i can game on a single one and then just watch while watchign vids on Internet on the second just like that? or would i be better off not crossfiring @ all. and if i dont corssfire what would be my fps boost?
View 7 Replies
View Related
Jan 17, 2009
i just installed Windows Vista x64 and immediately ran into network problems. My Network and Sharing center said my connection was connecting/disconnecting every few seconds and I was unable to reach the internet. My network is something like this (ignore the periods, they're there because the field won't format blank spaces :P ) :
Cable modem ---> Linksys SD2005 Switch ---> Wireless router ---> Game systems ........|........ (Netgear WGT624)......|.......+--->Vista 32 Bit PC........+--->Windows XP SP2 PC.....+--->Vista x64 (mine)
I have 4 separate IPs from my ISP so I can RDP into anything not behind the router from work. The wireless is just nice for random evices. All 3 PCs have independent IPs assigned from the ISPs DNS. All systems work fine except the x64.I thought it was my on-board NIC so I went and bought a PCI NIC. It did the same thing. At this point I think I might have 2 bad NICs so i went and got a third - same thing. I read around on some forums and tweaked my duplex settings which stopped the connect/disconnect, but then I got something like this in my Network and Sharing Center:x64 ===>green===>Unidentified Network===> X ===> Internet,Changing the duplex settings around did not resolve this.Next, I followed a Microsoft fix and changed a setting in my registry that did something about disabling a packet broadcast Vista does that some devices cannot respond to. Still no go.After pulling what's left of my hair out I slept on it and plugged my x64 system into the router.
Disco! It worked. However, because of the physical locations of each system this is messy and cannot remain in place. (Aside from that I want to resolve this issue because I think it is dumb :/ )So my question is - why can't my Vista x64 system get an IP via DHCP from the ISPs DNS? Is there something I need to turn off/kill that I haven't hit yet? When it is getting it from the router it seems happy as a clam but through the switch is no-go. (gives that nasty 169.... (preferred) address). I used mostly XP before and it looks like Vista is trying to connect to some local network and self-assign its IP. How can I make it stop (without asking my ISP for a static IP, cause they prolly won't give it to me w/o mucho $$)?
View 5 Replies
View Related
Sep 17, 2009
I have vista home basic. i think i accidently deleted the switch windows icon like completely not just from my quick launch how do i restore it?!
View 8 Replies
View Related
Oct 6, 2009
I want to know if it's possible to create a scheduled task that switches on the computer from hibernation at a specific time, gets past the user logon screen (it appears even though I haven't set a password) and then hibernates after a certain duration.
View 6 Replies
View Related
May 4, 2008
how do I switch between different accounts, we have my husbands and mine both at charter, but only mine comes up ty
View 5 Replies
View Related
Mar 23, 2008
when I tell vista to turn file sharing on, shouldn't it actually listen to me? When I select 'turn file sharing on' and apply it doesn't actually seem to do anything. Also the public folder filesharing gives the message 'RPC server unavailable'. Other computers on the network cannot be seen, but the router can. I have checked the router, done all the standard reseting things, checked that file sharing and network discovery are allowed by the firewall (and even turned it off to make doubly sure), used the netsetup program, and had several people who are fairly fluent with networking all give up in frustration.
View 4 Replies
View Related
Nov 8, 2009
My laptop inspiron 1515 (I know it starts with 15) has below it, a switch you can make "lock" in place and also has a picture of a lock next to it. I pushed it all the way and it locked in place, and I can't get it to go back where it was or unlock. Felt like breaking the thing but I thought maybe someone here would know what it's for.
View 9 Replies
View Related
